Variable chain conformations of renatured β‐glucan in dimethylsulfoxide/water mixture

We have firstly demonstrated the renaturation process of dissociated single chains of lentinan (s‐LNT) and the variable conformations of the renatured LNT (r‐LNT). The results from ultrasensitive differential scanning calorimetry and circular dichroism revealed that the variable structures including perfect triple helix, defective triple helix containing duplex segment, and single chains occurred in the renaturation of s‐LNT, depending on the renaturation time, solvent composition, molecular weight, and the mode of renaturation. When water was added into s‐LNT/dimethylsulfoxide (DMSO) to reach 95% (v/v), the classic low‐temperature intra‐triple‐helical conformational transition at ～10^°C (T₁) appeared within 4 h, indicative of a rapid reconstruction of triple helical structure. Besides, one newly endothermic peak at ～43^°C (T₂) simultaneously occurred, which was first ascribed to the melting of duplex segment in the imperfect triplex. The duplex stretches disappeared when DMSO reached 50%, in which single chains coexisted with triplex. Moreover, the duplex segment disappeared by slowly dropping water into s‐LNT/DMSO. This work suggested that the structure of r‐LNT could be controllable, and provided important information for their successful development and application in polymer and life science. © 2012 Wiley Periodicals, Inc. Biopolymers 97:988–997, 2012.     

Macromolecular triplex zipping observed in derivatives of fungal (1 --> 3)-beta-D-glucan by electron and atomic force microscopy

Scleroglucan, a comb-like branched (1 --> 3)-beta-D-glucan, dissolves in water as a stiff, triple-helical structure with the single glucose branches extending from the surface. The aim of this study is to investigate structural changes in the triple-helical structure associated with selective chemical modification of the side chains. Electron and atomic force microscopy, respectively, were used to investigate the macromolecular structures of aldehyde and carboxylated derivatives of scleroglucan-namely, scleraldehyde and sclerox-with different degrees of substitution. Scleraldehyde was observed to have structures resembling the triplex of the unmodified scleroglucan for all degrees of substitution up to 1.0. Additionally, an increasing tendency to aggregate for the higher degrees of substitution was observed. Fully carboxylated scleroglucan, sclerox(1.0), prepared from solutions at ionic strengths below 1.0M, revealed dispersed, flexible, coil-like structures. This indicates an electrostatic-driven strand separation of the scleroglucan triple-helical structure occurring concomitant with an increasing fraction of the side chains bearing carboxylate groups. Annealed sclerox(1.0) samples in aqueous 1.0 and 1.5M NaCl exhibited partly, or completely, reassociated triplex ensembles, with species ranging from apparently fully zipped linear and circular topologies, partly zipped structures with triplex strand separation occurring at the ends, to dispersed single-strands with random coil-like appearance. This study shows that periodate oxidation of the scleroglucan side chains is not a sufficient modification of the side chains to induce dissociation of the triple-helical structure, whereas further oxidation of the side chains to carboxylic groups dissociates the triple-helical structure when the degree of substitution is above 0.6.     

Crystal structure of the collagen model peptide (Pro‐Pro‐Gly)4‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)4 at 1.0 Å resolution

The single‐crystal structure of the collagen‐like peptide (Pro‐Pro‐Gly)₄‐Hyp‐Asp‐Gly‐(Pro‐Pro‐Gly)₄, was analyzed at 1.02 Å resolution. The overall average helical twist (θ = 49.6°) suggests that this peptide adopts a 7/2 triple‐helical structure and that its conformation is very similar to that of (Gly‐Pro‐Hyp)₉, which has the typical repeating sequence in collagen. High‐resolution studies on other collagen‐like peptides have shown that imino acid‐rich sequences preferentially adopt a 7/2 triple‐helical structure (θ = 51.4°), whereas imino acid‐lean sequences adopt relaxed conformations (θ < 51.4°). The guest Gly‐Hyp‐Asp sequence in the present peptide, however, has a large helical twist (θ = 61.1°), whereas that of the host Pro‐Pro‐Gly sequence is small (θ = 46.7°), indicating that the relationship between the helical conformation and the amino acid sequence of such peptides is complex. In the present structure, a strong intermolecular hydrogen bond between two Asp residues on the A and B strands might induce the large helical twist of the guest sequence; this is compensated by a reduced helical twist in the host, so that an overall 7/2‐helical symmetry is maintained. The Asp residue in the C strand might interact electrostatically with the N‐terminus of an adjacent molecule, causing axial displacement, reminiscent of the D‐staggered structure in fibrous collagens. © 2013 Wiley Periodicals, Inc. Biopolymers 99: 436–447, 2013.     

Rotameric preferences of a protein spin label at edge‐strand β‐sheet sites

Protein spin labeling to yield the nitroxide‐based R1 side chain is a powerful method to measure protein dynamics and structure by electron spin resonance. However, R1 measurements are complicated by the flexibility of the side chain. While analysis approaches for solvent‐exposed α‐helical environment have been developed to partially account for flexibility, similar work in β‐sheets is lacking. The goal of this study is to provide the first essential steps for understanding the conformational preferences of R1 within edge β‐strands using X‐ray crystallography and double electron electron resonance (DEER) distance measurements. Crystal structures yielded seven rotamers for a non‐hydrogen‐bonded site and three rotamers for a hydrogen‐bonded site. The observed rotamers indicate contextual differences in R1 conformational preferences compared to other solvent‐exposed environments. For the DEER measurements, each strand site was paired with the same α‐helical site elsewhere on the protein. The most probable distance observed by DEER is rationalized based on the rotamers observed in the crystal structure. Additionally, the appropriateness of common molecular modeling methods that account for R1 conformational preferences are assessed for the β‐sheet environment. These results show that interpretation of R1 behavior in β‐sheets is difficult and indicate further development is needed for these computational methods to correctly relate DEER distances to protein structure at edge β‐strand sites.     

Heating‐induced conformational change of a novel β‐(1→3)‐D‐glucan from Pleurotus geestanus

Recently, we isolated and purified a neutral polysaccharide (PGN) from edible fungus Pleurotus geestanus. Its structure was characterized by a range of physical–chemical methods, including high performance anion exchange chromatography, uronic acid, and protein analyses, size exclusion chromatography with ultraviolet, refractive index and light scattering detectors, and nuclear magnetic resonance. Our results revealed that PGN is a novel β‐(1→3)‐D ‐glucan with glucose attached to every other sugar residues at Position 6 in the backbone. It has a degree of branching of 1/2. Such structure is different from typical β‐(1→3)‐D ‐glucans schizophyllan and lentinan in which DB is 1/3 and 2/5, respectively. Rheological study showed a very interesting melting behavior of PGN in water solution: heating PGN in water leads to two transitions, in the range of 8–12.5°C and 25–60°C, respectively. The melting behavior and conformational changes were characterized by rheometry, micro‐differential scan calorimetry, atomic force microscopy, static and dynamic light scattering at different temperatures. The first heating‐induced transition corresponds to the disintegration of polymer bundles into small helical clusters, resembling the heating‐induced dissociation of SPG in water at 7°C; the second one might correspond to the dissociation of helical strands to individual chains. The ability of PGN to undergo a conformation/viscosity transition in water upon heating is very valuable to immobilize cells or enzymes or therapeutic DNA/RNA, which makes PGN a potentially useful biomaterial. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 121–131, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Sequence-dependent stability of intramolecular DNA triple helices

A set of 21 oligodeoxynucleotides were designed to fold into intramolecular triple helices of the pyrimidine motif under appropriate conditions. UV melting experiments on the triplexes which only differ in the number and distribution of third strand cytosines reveal the influence of sequence and pH on triplex stability and can be summarized as follows: (1) increasing the cytosine content in the third strand results in a higher thermal stability of the triplex at acidic pH but lowers the triplex to duplex melting temperature at neutral pH; (2) cytosines at terminal positions destabilize the triple helical structure as compared to non-terminal positions; (3) contiguous cytosines lead to a pH dependent destabilization of the triplex, the destabilizing effect being more pronounced at higher pH. Analysis of these effects in terms of the various interactions within a triple helical complex indicate that the sequence-dependent stabilities are largely determined by the extent of protonation for individual third strand cytosines.     

Sequence-Dependent Stability of Intramolecular DNA Triple Helices

Abstract

A set of 21 oligodeoxynucleotides were designed to fold into intramolecular triple helices of the pyrimidine motif under appropriate conditions. UV melting experiments on the triplexes which only differ in the number and distribution of third strand cytosines reveal the influence of sequence and pH on triplex stability and can be summarized as follows: (1) increasing the cytosine content in the third strand results in a higher thermal stability of the triplex at acidic pH but lowers the triplex to duplex melting temperature at neutral pH; (2) cytosines at terminal positions destabilize the triple helical structure as compared to non-terminal positions; (3) contiguous cytosines lead to a pH dependent destabilization of the triplex, the destabilizing effect being more pronounced at higher pH. Analysis of these effects in terms of the various interactions within a triple helical complex indicate that the sequence-dependent stabilities are largely determined by the extent of protonation for individual third strand cytosines.     

Determination of the secondary structural elements of chicken liver fatty acid binding protein by two‐dimensional homonuclear NMR

A conformational study in solution of the fatty acid binding protein from chicken liver is presented. The nearly complete sequence‐specific ¹H resonance assignment was achieved from homonuclear two‐dimensional nmr experiments using a sample of native protein. The principal elements of secondary structure were identified: 10 antiparallel β‐strands and one helical segment followed by a turn comprising 5 residues. These elements correspond closely with those of the crystal structure of the related protein, and two new secondary structural features obtained from the nmr data are the β‐sheet conformation between the first and the last β‐strand in the protein sequence, as well as a helical loop at the N‐terminus of the polypeptide chain. © 1999 John Wiley & Sons, Inc. Biopoly 50: 1–11, 1999     

Diverse modes of 5′‐[4‐(aminoiminomethyl)phenyl]‐[2,2′‐bifuran]‐5‐carboximidamide (DB832) interaction with multi‐stranded DNA structures

The modes of binding of 5′‐[4‐(aminoiminomethyl)phenyl]‐[2,2′‐Bifuran]‐5‐carboximidamide (DB832) to multi‐stranded DNAs: human telomere quadruplex, monomolecular R‐triplex, pyr/pur/pyr triplex consisting of 12 T*(T·A) triplets, and DNA double helical hairpin were studied. The optical adsorption of the ligand was used for monitoring the binding and for determination of the association constants and the numbers of binding sites. CD spectra of DB832 complexes with the oligonucleotides and the data on the energy transfer from DNA bases to the bound DB832 assisted in elucidating the binding modes. The affinity of DB832 to the studied multi‐stranded DNAs was found to be greater (K_ass ≈ 10⁷M^?1) than to the duplex DNA (K_ass ≈ 2 × 10⁵M^?1). A considerable stabilizing effect of DB832 binding on R‐triplex conformation was detected. The nature of the ligand tight binding differed for the studied multi‐stranded DNA depending on their specific conformational features: recombination‐type R‐triplex demonstrated the highest affinity for DB832 groove binding, while pyr/pur/pyr TTA triplex favored DB832 intercalation at the end stacking contacts and the human telomere quadruplex d[AG₃(T₂AG₃)₃] accommodated the ligand in a capping mode. Additionally, the pyr/pur/pyr TTA triplex and d[AG₃(T₂AG₃)₃] quadruplex bound DB832 into their grooves, though with a markedly lesser affinity. DB832 may be useful for discrimination of the multi‐sranded DNA conformations and for R‐triplex stabilization. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 8–20, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Behaviour of scleroglucan in aqueous solution containing sodium hydroxide

This paper reports the behaviour of scleroglucan in aqueous solution as a function of NaOH concentration and temperature. Two different transitions are observed. The first one, reversible when temperature varies, is attributed to a change in the local structure of the side chain glucose residues and water organization in the triple helix conformation. The second one, irreversible, is due to the conformational transition from the triple helix to the coil. It is found that 0.20 and 0.01 m NaOH are good solvents to charaterize the single chain and the triple helical structure respectively. The presence of NaOH, even at the low concentration 0.01 m, modifies the polymer solubility such as to prevent gel formation, which may occur in the absence of added salt due to triple helix interactions at temperature below the temperatures of the first transition.     

The cytokine stimulating activity of (1-->3)-beta-D-glucans is dependent on the triple helix conformation

The immunomodulating properties of comb-like branched (1-->3)-beta-D-glucans scleroglucan, schizophyllan and lentinan depend on branching pattern, molecular weight and higher-order structure. The effect of weight average molecular weight Mw and higher order structure of scleroglucan, on stimulation of human monocytes cultured in vitro to secrete tumor necrosis factor-alpha (TNF-alpha) was investigated. The higher order structures of the scleroglucan samples were determined by electron microscopy. The data showed that the samples with a linear wormlike, triple helical structure with Mw less than 50 x 10(4) g/mol or larger than 110 x 10(4) g/mol stimulated the monocytes more efficiently than samples with Mw in the range (67-110) x 10(4) g/mol. The denaturation of the linear triple helices by NaOH (> 0.25 M), followed by neutralization yielded blends of linear and macrocyclic topologies with concomitant irreversible reduction of the cytokine inducing activity compared with the untreated scleroglucans. The dose-dependent ability to activate monocytes to cytokine production was not restored following annealing of the denatured-renatured samples, despite the fact that electron micrographs revealed similar structures of these annealed samples to the starting material. Pre-incubation of monocytes with antibodies against cluster of differentiation antigens CD14 or CD11b reduced the scleroglucan potency to stimulate TNF-alpha secretion mainly for mAb against CD14 in the presence of serum.     

The integral divalent cation within the intermolecular purine*purine. pyrimidine structure: a variable determinant of the potential for and characteristics of the triple helical association.

In vitro assembly of an intermolecular purine*purine.pyrimidine triple helix requires the presence of a divalent cation. The relationships between cation coordination and triplex assembly were investigated, and we have obtained new evidence for at least three functionally distinct potential modes of divalent cation coordination. (i) The positive influence of the divalent cation on the affinity of the third strand for its specific target correlates with affinity of the cation for coordination to phosphate. (ii) Once assembled, the integrity of the triple helical structure remains dependent upon its divalent cation component. A mode of heterocyclic coordination/chelation is favorable to triplex formation by decreasing the relative tendency for efflux of integral cations from within the triple helical structure. (iii) There is also a detrimental mode of base coordination through which a divalent cation may actively antagonize triplex assembly, even in the presence of other supportive divalent cations. These results demonstrate the considerable impact of the cationic component, and suggest ways in which the triple helical association might be positively or negatively modulated.     

Design,synthesis, and conformational studies of the hGM‐CSF derived peptide (13–27)–Gly–(75–87)

An analogue of the human granulocyte–macrophage colony‐stimulating factor (hGM‐CSF), hGM‐CSF(13–27)–Gly–(75–87) was synthesized by solid phase methodology. This analogue was designed to comprise helices A and C of the native growth factor, linked by a glycine bridge. Helices A and C form half of a four‐helix bundle motif in the crystal structure of the native factor and are involved in the interaction with α‐ and β‐chains of the heterodimeric receptor. A conformational analysis of the synthetic analogue by CD, two‐dimensional nmr spectroscopy, and molecular dynamics calculations is reported. The analogue is in a random structure in water and assumes a partially α‐helical conformation in a 1 : 1 trifluoroethanol/water mixture. The helix content in this medium is ∼ 70%. By 2D‐nmr spectroscopy, two helical segments were identified in the sequences corresponding to helices A and C. In addition to medium‐ and short‐range NOESY connectivities, a long‐range cross peak was found between the Cβ proton of Val¹⁶ and NH proton of His⁸⁷ (using the numbering of the native protein). Experimentally derived interproton distances were used as restraints in molecular dynamics calculations, utilizing the x‐ray coordinates as the initial structure. The final structure is characterized by two helical segments in close spatial proximity, connected by a loop region. This structure is similar to that of the corresponding domain in the x‐ray structure of the native growth factor in which helices A and C are oriented in an antiparallel fashion. The N‐terminal residues Gly–Pro of helix C are involved in an irregular turn connecting the two helical segments. As a consequence, helix C is appreciably shifted and slightly rotated with respect to helix A compared to the x‐ray structure of the native growth factor. These small differences in the topology of the two helices could explain the lower biological activity of this analogue with respect to that of the native growth factor. © 1999 John Wiley & Sons, Inc. Biopoly 50: 545–554, 1999     

Conformational studies of a bicyclic,lactam‐constrained parathyroid hormone‐related protein‐derived agonist

The N‐terminal 1–34 segments of both parathyroid hormone (PTH) and parathyroid hormone‐related protein (PTHrP) bind and activate the same membrane receptor in spite of major differences in their amino acid sequence. The hypothesis was made that they share the same bioactive conformation when bound to the receptor. A common structural motif in all bioactive fragments of the hormone in water/trifluoroethanol mixtures or in aqueous solution containing detergent micelles is the presence of two helical segments at the N‐ and C‐termini of the sequence. In order to stabilize the helical structures, we have recently synthesized and studied the PTHrP(1–34) analog [(Lys13–As p¹⁷, Lys26–As p³⁰)]PTHrP(1–34)NH₂, which contains lactam‐constrained Lys‐Asp side chains at positions i, i+4. This very potent agonist exhibits enhanced helix stability with respect to the corresponding linear peptide and also two flexible sites at positions 12 and 19 in 1:1 trifluoroethanol/water. These structural elements have been suggested to play a critical role in bioactivity. In the present work we have extended our conformational studies on the bicyclic lactam‐constrained analog to aqueous solution. By CD, 2D‐NMR and structure calculations we have shown that in water two helical segments are present in the region of the lactam bridges (13–18, and 26–31) with high flexibility around Gly¹² and Arg¹⁹. Thus, the essential structural features observed in the aqueous‐organic medium are maintained in water even if, in this solvent, the overall structure is more flexible. Our findings confirm the stabilizing effect of side‐chain lactam constraints on the α‐helical structure. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

S‐ to N‐Acyl transfer in S‐acylcysteine isopeptides via 9‐, 10‐, 12‐, and 13‐membered cyclic transition states

S‐Acyl cysteine peptides containing α‐, β‐ or γ‐amino acid residues undergo long‐range S‐ to N‐acyl transfer to give analogs of native tripeptides and tetrapeptides containing additional carbon atoms in the chain. The ease of intramolecular S → N‐acyl transfer relative to intermolecular transacylation is favored increasingly for 9 < 12 < 13 ~ 10‐membered cyclic transition states; the observed order is explained on conformational and intermolecular interaction considerations. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Preferred side‐chain conformation of arginine residues in a triple‐helical structure

The crystal structure of the triple‐helical peptide (Pro‐Hyp‐Gly)₃‐Pro‐Arg‐Gly‐(Pro‐Hyp‐Gly)₄ (POG3‐PRG‐POG4) was determined at 1.45 Å resolution. POG3‐PRG‐POG4 was designed to permit investigation of the side‐chain conformation of the Arg residues in a triple‐helical structure. Because of the alternative structure of one of three Arg residues, four side‐chain conformations were observed in an asymmetric unit. Among them, three adopt a ttg^?t conformation and the other adopts a tg^?g^?t conformation. A statistical analysis of 80 Arg residues in various triple‐helical peptides showed that, unlike those in globular proteins, they preferentially adopt a tt conformation for χ₁ and χ₂, as observed in POG3‐PRG‐POG4. This conformation permits van der Waals contacts between the side‐chain atoms of Arg and the main‐chain atoms of the adjacent strand in the same molecule. Unlike many other host–guest peptides, in which there is a significant difference between the helical twists in the guest and the host peptides, POG3‐PRG‐POG4 shows a marked difference between the helical twists in the N‐terminal peptide and those in the C‐terminal peptide, separated near the Arg residue. This suggested that the unique side‐chain conformation of the Arg residue affects not only the conformation of the guest peptide, but also the conformation of the peptide away from the Arg residue. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 1000–1009, 2014.     

Interaction of 9-O-(ω-amino) alkyl ether berberine analogs with poly(dT)·poly(dA)*poly(dT) triplex and poly(dA)·poly(dT) duplex: a comparative study

Isoquinoline alkaloids and their analogs represent an important class of molecules for their broad range of clinical and pharmacological utility. These compounds are of current interest owing to their low toxicity and excellent chemo preventive properties. These alkaloids can play important role in stabilising the nucleic acid triple helices. The present study has focused on the interaction of five 9-O-(ω-amino) alkyl ether berberine analogs with the DNA triplex poly(dT)·poly(dA)*poly(dT) and the parent duplex poly(dA)·poly(dT) studied using various biophysical techniques. Scatchard analysis of the spectral data indicated that the analogs bind both to the duplex and triplex in a non-cooperative manner in contrast to the cooperative binding of berberine to the DNA triplex. Strong intercalative binding to the DNA triplex structure was revealed from ferrocyanide quenching, fluorescence polarization and viscosity results. Thermal melting studies demonstrated higher stabilization of the Hoogsteen base paired third strand of the DNA triplex compared to the Watson–Crick strand. Circular dichroism studies suggested a stronger perturbation of the DNA triplex conformation by the alkaloid analogs compared to the duplex. The binding was entropy-driven in each case and the entropy contribution to free energy increased as the length of the alkyl side chain increased. The analogs exhibited stronger binding affinity to the triple helical structure compared to the parent double helical structure.     

VCD studies on cyclic peptides assembled from L‐α‐amino acids and a trans‐2‐aminocyclopentane‐ or trans‐2‐aminocyclohexane carboxylic acid

The increasing interest in peptidomimetics of biological relevance prompted us to synthesize a series of cyclic peptides comprising trans‐2‐aminocyclohexane carboxylic acid (Achc) or trans‐2‐aminocyclopentane carboxylic acid (Acpc). NMR experiments in combination with MD calculations were performed to investigate the three‐dimensional structure of the cyclic peptides. These data were compared to the conformational information obtained by electronic circular dichroism (ECD) and vibrational circular dichroism (VCD) spectroscopy. Experimental VCD spectra were compared to theoretical VCD spectra computed quantum chemically at B3LYP/6‐31G(d) density functional theory (DFT) level. The good agreement between the structural features derived from the VCD spectra and the NMR‐based structures underlines the applicability of VCD in studying the conformation of small cyclic peptides. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Effects of fluidity on the ensemble structure of a membrane embedded α‐helical peptide

Melittin, the main hemolytic component of honeybee venom, is unfolded in an aqueous environment and folds into an α‐helical conformation in a lipid environment. Membrane fluidity is known to affect the activity and structure of melittin. By combining two structurally sensitive optical methods, circular dichroism (CD) and deep‐ultraviolet resonance Raman spectroscopy (dUVRR), we have identified distinct structural fluctuations in melittin correlated with increased and decreased 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphocholine bilayer fluidities. CD spectra have reduced intensity at temperatures above 22°C and high concentrations of the cholesterol analog 5α‐cholestan‐3β‐ol indicating distortions in the α‐helical structure under these conditions. No increase in the amide S is observed in the temperature‐dependent dUVRR spectra, suggesting an increase in 3₁₀‐helical structure with increasing temperatures above 22°C. However, incorporation of 25 mol% 5α‐cholestan‐3β‐ol resulted in a small increase in the amide S intensity indicating partial unfolding of melittin. © 2014 Wiley Periodicals, Inc. Biopolymers 101: 895–902, 2014.