Redox potentials of the blue copper sites of bilirubin oxidases

The redox potentials of the multicopper redox enzyme bilirubin oxidase (BOD) from two organisms were determined by mediated and direct spectroelectrochemistry. The potential of the T1 site of BOD from the fungus Myrothecium verrucaria was close to 670 mV, whereas that from Trachyderma tsunodae was > 650 mV vs. NHE. For the first time, direct electron transfer was observed between gold electrodes and BODs. The redox potentials of the T2 sites of both BODs were near 390 mV vs. NHE, consistent with previous finding for laccase and suggesting that the redox potentials of the T2 copper sites of most blue multicopper oxidases are similar, about 400 mV.     

Comparison of Fungal Laccases and Redox Mediators in Oxidation of a Nonphenolic Lignin Model Compound

Several fungal laccases have been compared for the oxidation of a nonphenolic lignin dimer, 1-(3,4-dimethoxyphenyl)-2-(2-methoxyphenoxy)propan-1,3-diol (I), and a phenolic lignin model compound, phenol red, in the presence of the redox mediators 1-hydroxybenzotriazole (1-HBT) or violuric acid. The oxidation rates of dimer I by the laccases were in the following order: Trametes villosa laccase (TvL) > Pycnoporus cinnabarinus laccase (PcL) > Botrytis cinerea laccase (BcL) > Myceliophthora thermophila laccase (MtL) in the presence of either 1-HBT or violuric acid. The order is the same if the laccases are used at the same molar concentration or added to the same activity (with ABTS [2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] as a substrate). During the oxidation of dimer I, both 1-HBT and violuric acid were to some extent consumed. Their consumption rates also follow the above order of laccases, i.e., TvL > PcL > BcL > MtL. Violuric acid allowed TvL and PcL to oxidize dimer I much faster than 1-HBT, while BcL and violuric acid oxidized dimer I more slowly than BcL and 1-HBT. The oxidation rate of dimer I is dependent upon both k_cat and the stability of the laccase. Both 1-HBT and violuric acid inactivated the laccases, violuric acid to a greater extent than 1-HBT. The presence of dimer I or phenol red in the reaction mixture slowed down this inactivation. The inactivation is mainly due to the reaction of the redox mediator free radical with the laccases. We did not find any relationship between the carbohydrate content of the laccases and their inactivation. When the redox potential of the laccases is in the range of 750 to 800 mV, i.e., above that of the redox mediator, it does not affect k_cat and the oxidation rate of dimer I.     

Laccase of the lignolytic fungus Trametes hirsuta: Purification and characterization of the enzyme, and cloning and primary structure of the gene

The main physicochemical characteristics of the major isoform of the laccase secreted by the fungus Trametes hirsuta 072 were studied. The enzyme belongs to the group of high redox potential laccases (E _T1 ⁰ 790 ± 5), and it oxidizes with high efficiency various substrates of phenolic nature. The gene of this isoform was cloned, and its nucleotide sequence was determined. The length of the complete gene is 2134 bp. It comprises 11 exons and 10 introns. Analysis of the amino acid sequence of T. hirsuta 072 laccase demonstrated a high homology to the other laccases secreted by fungi of the genus Trametes.     

Crystal structure of a laccase from the fungus Trametes versicolor at 1.90-A resolution containing a full complement of coppers

Laccase is a polyphenol oxidase, which belongs to the family of blue multicopper oxidases. These enzymes catalyze the one-electron oxidation of four reducing-substrate molecules concomitant with the four-electron reduction of molecular oxygen to water. Laccases oxidize a broad range of substrates, preferably phenolic compounds. In the presence of mediators, fungal laccases exhibit an enlarged substrate range and are then able to oxidize compounds with a redox potential exceeding their own. Until now, only one crystal structure of a laccase in an inactive, type-2 copper-depleted form has been reported. We present here the first crystal structure of an active laccase containing a full complement of coppers, the complete polypeptide chain together with seven carbohydrate moieties. Despite the presence of all coppers in the new structure, the folds of the two laccases are quite similar. The coordination of the type-3 coppers, however, is distinctly different. The geometry of the trinuclear copper cluster in the Trametes versicolor laccase is similar to that found in the ascorbate oxidase and that of mammalian ceruloplasmin structures, suggesting a common reaction mechanism for the copper oxidation and the O(2) reduction. In contrast to most blue copper proteins, the type-1 copper in the T. versicolor laccase has no axial ligand and is only 3-fold coordinated. Previously, a modest elevation of the redox potential was attributed to the lack of an axial ligand. Based on the present structural data and sequence comparisons, a mechanism is presented to explain how laccases could tune their redox potential by as much as 200 mV.     

Redox potentials of the blue copper sites of bilirubin oxidases

The redox potentials of the multicopper redox enzyme bilirubin oxidase (BOD) from two organisms were determined by mediated and direct spectroelectrochemistry. The potential of the T1 site of BOD from the fungus Myrothecium verrucaria was close to 670 mV, whereas that from Trachyderma tsunodae was >650 mV vs. NHE. For the first time, direct electron transfer was observed between gold electrodes and BODs. The redox potentials of the T2 sites of both BODs were near 390 mV vs. NHE, consistent with previous finding for laccase and suggesting that the redox potentials of the T2 copper sites of most blue multicopper oxidases are similar, about 400 mV.     

Roles of the indole ring of Trp396 covalently bound with the imidazole ring of His398 coordinated to type I copper in bilirubin oxidase

Bilirubin oxidase has a post-translationally formed covalent-bond between the imidazole ring of His398 coordinated to type I copper and the indole ring of Trp396 located in the outer-coordination sphere. We performed point mutations at Trp396 with Ala, Thr, Phe, and Tyr with the aim of elucidating the role of the imidazole-indole moiety found only in bilirubin oxidase. The result showed shifts in the redox potential of type I copper towards negative direction by > 100 mV and decreases in cathodic current in electrochemistry, whereas optical and magnetic properties of type I copper were not affected or sparingly affected. Along with the conspicuous changes in redox properties enzymatic activities of the Trp396 mutants were prominently decreased. Further, chemical modification of the Trp residues with N-bromosuccinimide and photo-induced formylations of bilirubin oxidase exerted more pronounced effects on both redox properties and enzymatic activities compared to the Trp396 mutants. All these results unequivocally indicate that the covalent-bond formed between Trp396 and His398 plays a crucial role to enhance enzymatic activities of bilirubin oxidase by shifting the redox potential of type I Cu towards positive direction and also by functioning as the effective pathway of electron transport.     

Switching from blue to yellow: altering the spectral properties of a high redox potential laccase by directed evolution

Abstract

During directed evolution to functionally express the high redox potential laccase from the PM1 basidiomycete in Saccharomyces cerevisiae, the characteristic maximum absorption at the T1 copper site (Abs₆₁₀T1Cu) was quenched, switching the typical blue colour of the enzyme to yellow. To determine the molecular basis of this colour change, we characterized the original wild-type laccase and its evolved mutant. Peptide printing and MALDI-TOF analysis confirmed the absence of contaminating protein traces that could mask the Abs₆₁₀T1Cu, while conservation of the redox potential at the T1 site was demonstrated by spectroelectrochemical redox titrations. Both wild-type and evolved laccases were capable of oxidizing a broad range of substrates (ABTS, guaiacol, DMP, synapic acid) and they displayed similar catalytic efficiencies. The laccase mutant could only oxidize high redox potential dyes (Poly R-478, Reactive Black 5, Azure B) in the presence of exogenous mediators, indicating that the yellow enzyme behaves like a blue laccase. The main consequence of over-expressing the mutant laccase was the generation of a six-residue N-terminal acidic extension, which was associated with the failure of the STE13 protease in the Golgi compartment giving rise to alternative processing. Removal of the N-terminal tail had a negative effect on laccase stability, secretion and its kinetics, although the truncated mutant remained yellow. The results of CD spectra analysis suggested that polyproline helixes were formed during the directed evolution altering spectral properties. Moreover, introducing the A461T and S426N mutations in the T1 environment during the first cycles of laboratory evolution appeared to mediate the alterations to Abs₆₁₀T1Cu by affecting its coordinating sphere. This laccase mutant is a valuable departure point for further protein engineering towards different fates.     

Electrochemical Studies of a Truncated Laccase Produced in Pichia pastoris

The cDNA that encodes an isoform of laccase from Trametes versicolor (LCCI), as well as a truncated version (LCCIa), was subcloned and expressed by using the yeast Pichia pastoris as the heterologous host. The amino acid sequence of LCCIa is identical to that of LCCI except that the final 11 amino acids at the C terminus of LCCI are replaced with a single cysteine residue. This modification was introduced for the purpose of improving the kinetics of electron transfer between an electrode and the copper-containing active site of laccase. The two laccases (LCCI and LCCIa) are compared in terms of their relative activity with two substrates that have different redox potentials. Results from electrochemical studies on solutions containing LCCI and LCCIa indicate that the redox potential of the active site of LCCIa is shifted to more negative values (411 mV versus normal hydrogen electrode voltage) than that found in other fungal laccases. In addition, replacing the 11 codons at the C terminus of the laccase gene with a single cysteine codon (i.e., LCCI→LCCIa) influences the rate of heterogeneous electron transfer between an electrode and the copper-containing active site (k_het for LCCIa = 1.3 × 10⁻⁴ cm s⁻¹). These results demonstrate for the first time that the rate of electron transfer between an oxidoreductase and an electrode can be enhanced by changes to the primary structure of a protein via site-directed mutagenesis.     

Direct electron transfer from graphite and functionalized gold electrodes to T1 and T2/T3 copper centers of bilirubin oxidase

Direct electron transfer (DET) from bare spectrographic graphite (SPGE) or 3-mercaptopropionic acid-modified gold (MPA-gold) electrodes to Trachyderma tsunodae bilirubin oxidase (BOD) was studied under anaerobic and aerobic conditions by cyclic voltammetry and chronoamperometry. On cyclic voltammograms nonturnover Faradaic signals with midpoint potentials of about 700 mV and 400 mV were clearly observed corresponding to redox transformations of the T1 site and the T2/T3 cluster of the enzyme, respectively. The immobilized BOD was differently oriented on the two electrodes and its catalysis of O₂-electroreduction was also massively different. On SPGE, where most of the enzyme was oriented with the T1 copper site proximal to the carbon with a quite slow ET process, well-pronounced DET-bioelectroreduction of O₂ was observed, starting already at > 700 mV vs. NHE. In contrast, on MPA-gold most of the enzyme was oriented with its T2/T3 copper cluster proximal to the metal. Indeed, there was little DET-based catalysis of O₂-electroreduction, even though the ET between the MPA-gold and the T2/T3 copper cluster of BOD was similar to that observed for the T1 site at SPGE. When BOD actively catalyzes the O₂-electroreduction, the redox potential of its T1 site is 690 mV vs. NHE and that of one of its T2/T3 copper centers is 390 mV vs. NHE. The redox potential of the T2/T3 copper cluster of a resting form of BOD is suggested to be about 360 mV vs. NHE. These values, combined with the observed biocatalytic behavior, strongly suggest an uphill intra-molecular electron transfer from the T1 site to the T2/T3 cluster during the catalytic turnover of the enzyme.     

Engineering the Expression and Characterization of Two Novel Laccase Isoenzymes from Coprinus comatus in Pichia pastoris by Fusing an Additional Ten Amino Acids Tag at N-Terminus

The detail understanding of physiological/biochemical characteristics of individual laccase isoenzymes in fungi is necessary for fundamental and application purposes, but our knowledge is still limited for most of fungi due to difficult to express laccases heterologously. In this study, two novel laccase genes, named lac3 and lac4, encoding proteins of 547 and 532-amino acids preceded by 28 and 16-residue signal peptides, respectively, were cloned from the edible basidiomycete Coprinus comatus. They showed 70% identity but much lower homology with other fungal laccases at protein level (less than 58%). Two novel laccase isoenzymes were successfully expressed in Pichia pastoris by fusing an additional 10 amino acids (Thr-Pro-Phe-Pro-Pro-Phe-Asn-Thr-Asn-Ser) tag at N-terminus, and the volumetric activities could be dramatically enhanced from undetectable level to 689 and 1465 IU/l for Lac3 and Lac4, respectively. Both laccases possessed the lowest K _m and highest k _cat/K _m value towards syringaldazine, followed by ABTS, guaiacol and 2,6-dimethylphenol similar as the low redox potential laccases from other microorganisms. Lac3 and Lac4 showed resistant to SDS, and retained 31.86% and 43.08% activity in the presence of 100 mM SDS, respectively. Lac3 exhibited higher decolorization efficiency than Lac4 for eleven out of thirteen different dyes, which may attribute to the relatively higher catalytic efficiency of Lac3 than Lac4 (in terms of k _cat/K _m) towards syringaldazine and ABTS. The mild synergistic decolorization by two laccases was observed for triphenylmethane dyes but not for anthraquinone and azo dyes.     

Redox Chemistry in Laccase-Catalyzed Oxidation of N-Hydroxy Compounds

1-Hydroxybenzotriazole, violuric acid, and N-hydroxyacetanilide are three N-OH compounds capable of mediating a range of laccase-catalyzed biotransformations, such as paper pulp delignification and degradation of polycyclic hydrocarbons. The mechanism of their enzymatic oxidation was studied with seven fungal laccases. The oxidation had a bell-shaped pH-activity profile with an optimal pH ranging from 4 to 7. The oxidation rate was found to be dependent on the redox potential difference between the N-OH substrate and laccase. A laccase with a higher redox potential or an N-OH compound with a lower redox potential tended to have a higher oxidation rate. Similar to the enzymatic oxidation of phenols, phenoxazines, phenothiazines, and other redox-active compounds, an “outer-sphere” type of single-electron transfer from the substrate to laccase and proton release are speculated to be involved in the rate-limiting step for N-OH oxidation.     

High redox potential laccases from the ligninolytic fungi Pycnoporus coccineus and Pycnoporus sanguineus suitable for white biotechnology: from gene cloning to enzyme characterization and applications

Aims: Exploitation of natural biodiversity in species Pycnoporus coccineus and Pycnoporus sanguineus to screen for a new generation of laccases with properties suitable for the lignin‐processing sector. Methods and Results: Thirty strains originating from subtropical and tropical environments, mainly isolated from fresh specimens collected in situ, were screened for laccase activity. On the basis of levels of enzyme activity and percentage of similarity between protein sequences, the laccases from strains BRFM 938, BRFM 66 and BRFM 902 were selected for purification and characterization. Each BRFM 938, BRFM 66 and BRFM 902 laccase gene encoded a predicted protein of 518 amino acids; the three deduced proteins showed 68·7–97·5% similarity with other Polyporale laccases. The three laccases (59·5–62·9 kDa with 7–10% carbohydrate content) had high redox potentials (0·72–0·75 V vs normal hydrogen electrode at pH 6), remained highly stable up to 75–78°C and at pH 5–7 mixtures, and were resistant to methyl and ethyl alcohols, acetonitrile and dimethylsulfoxide at concentrations as high as 50% (v/v). The best laccase‐1‐hydroxybenzotriazole systems permitted almost 100% of various polyphenolic dye decolourization and oxidation of adlerol and veratryl alcohol. Conclusions: The three laccases showed complementary biochemical features. BRFM 938 laccase had the highest thermo‐ and pH stability, catalytic efficiency towards 2,2′‐azino‐bis‐[3‐ethylthiazoline‐6‐sulfonate] and resistance to alcoholic solvents. BRFM 66 laccase had the highest rates of dye decolourization and oxidation of nonphenolic compounds. Significance and Impact of the Study: This study identified P. coccineus and P. sanguineus as outstanding producers of high redox potential laccases, easy to purify and scale‐up for industrial production. Three new laccases proved to be suitable models for white biotechnology processes and for further molecular breeding to create a new generation of tailor‐made enzymes.     

A Novel Extracellular Multicopper Oxidase from Phanerochaete chrysosporium with Ferroxidase Activity

Lignin degradation by the white rot basidiomycete Phanerochaete chrysosporium involves various extracellular oxidative enzymes, including lignin peroxidase, manganese peroxidase, and a peroxide-generating enzyme, glyoxal oxidase. Recent studies have suggested that laccases also may be produced by this fungus, but these conclusions have been controversial. We identified four sequences related to laccases and ferroxidases (Fet3) in a search of the publicly available P. chrysosporium database. One gene, designated mco1, has a typical eukaryotic secretion signal and is transcribed in defined media and in colonized wood. Structural analysis and multiple alignments identified residues common to laccase and Fet3 sequences. A recombinant MCO1 (rMCO1) protein expressed in Aspergillus nidulans had a molecular mass of 78 kDa, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and the copper I-type center was confirmed by the UV-visible spectrum. rMCO1 oxidized various compounds, including 2,2′-azino(bis-3-ethylbenzthiazoline-6-sulfonate) (ABTS) and aromatic amines, although phenolic compounds were poor substrates. The best substrate was Fe²⁺, with a K_m close to 2 μM. Collectively, these results suggest that the P. chrysosporium genome does not encode a typical laccase but rather encodes a unique extracellular multicopper oxidase with strong ferroxidase activity.     

Detection,quantification and identification of fungal extracellular laccases using polyclonal antibody and mass spectrometry

This study presents a combined method to analyze extracellular fungal laccases using a new anti-laccase antibody together with the identification of tryptic laccase peptides by mass spectrometry (nanoLC–ESI–MS/MS). The polyclonal anti-laccase antibody LccCbr2 was raised against peptides designed from the copper binding region II of fungal laccases using in silico data obtained from GenBank database. As a consequence, detection requires denaturation of the enzymes due to the stable conformation of the copper binding region II. The specificity of the antibody was shown with denatured laccase Lcc1 of Coprinopsis cinerea and laccase of Hypholoma fasciculare. LccCbr2 detected amounts as low as 5 ng of highly purified laccase, indicating a possible use of the antibody for quantification of laccase proteins. Denatured extracellular laccases from culture supernatants of the basidiomycetes C. cinerea, H. fasciculare, Lentinula edodes, Mycena sp., Piriformospora indica, Pleurotus cornucopiae, Pleurotus ostreatus, Pycnoporus cinnabarinus, Trametes versicolor and furthermore the ascomycete Verpa conica were detected with apparent molecular masses between 60 and 70 kDa by LccCbr2. The identity of extracellular laccases from C. cinerea, H. fasciculare, P. ostreatus, P. cinnabarinus and T. versicolor were verified by tryptic peptides using nanoLC–ESI–MS/MS.     

Isolation and Study of Some Properties of Laccase from the Basidiomycetes Cerrena maxima

A new strain producing extracellular laccase (Cerrena maxima 0275) was found by screening of isolates of Basidiomycetes, and the dynamics of laccase biosynthesis by this strain was studied. The enzyme was purified to homogeneity. The molecular weight of the enzyme is 57 kD, and its pI is 3.5. The activity is constant at pH values in the range 3.0-5.0. The temperature optimum for activity is 50°C. The thermal stability of the laccase was studied. The catalytic and Michaelis constants for catechol, hydroquinone, sinapinic acid, and K₄ Fe(CN)₆ were determined. The standard redox potential of type 1 copper in the enzyme is 750 ± 5 mV. Thus, the investigated laccase is a high redox potential laccase.     

Coupling of aromatic amines onto syringylglycerol β-guaiacylether using Bacillus SF spore laccase: A model for functionalization of lignin-based materials

The potential of Bacillus SF spore laccase for coupling aromatic amines to lignin model molecules as a way of creating a stable reactive surface was investigated. The Bacillus spore laccase was shown to be active within the neutral to alkaline conditions (pH 7–8.5) and was more resistant to common laccase inhibitors than fungal laccases. Using this enzyme, tyramine was successfully covalently coupled onto syringylglycerol β-guaiacylether via a 4-O-5 bond, leaving the –NH₂ group free for further attachment of functional molecules. This study demonstrates the potential of Bacillus SF spore laccase for application in lignocellulose surface functionalization and other coupling reactions which can be carried out at neutral to alkaline pH under extreme conditions which normally inhibit fungal laccases.     

Pushing the limits of automatic computational protein design: design, expression, and characterization of a large synthetic protein based on a fungal laccase scaffold

The de novo engineering of new proteins will allow the design of complex systems in synthetic biology. But the design of large proteins is very challenging due to the large combinatorial sequence space to be explored and the lack of a suitable selection system to guide the evolution and optimization. One way to approach this challenge is to use computational design methods based on the current crystallographic data and on molecular mechanics. We have used a laccase protein fold as a scaffold to design a new protein sequence that would adopt a 3D conformation in solution similar to a wild-type protein, the Trametes versicolor (TvL) fungal laccase. Laccases are multi-copper oxidases that find utility in a variety of industrial applications. The laccases with highest activity and redox potential are generally secreted fungal glycoproteins. Prokaryotic laccases have been identified with some desirable features, but they often exhibit low redox potentials. The designed sequence (DLac) shares a 50% sequence identity to the original TvL protein. The new DLac gene was overexpressed in E. coli and the majority of the protein was found in inclusion bodies. Both soluble protein and refolded insoluble protein were purified, and their identity was verified by mass spectrometry. Neither protein exhibited the characteristic T1 copper absorbance, neither bound copper by atomic absorption, and neither was active using a variety of laccase substrates over a range of pH values. Circular dichroism spectroscopy studies suggest that the DLac protein adopts a molten globule structure that is similar to the denatured and refolded native fungal TvL protein, which is significantly different from the natively secreted fungal protein. Taken together, these results indicate that the computationally designed DLac expressed in E. coli is unable to utilize the same folding pathway that is used in the expression of the parent TvL protein or the prokaryotic laccases. This sequence can be used going forward to help elucidate the sequence requirements needed for prokaryotic multi-copper oxidase expression. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11693-011-9080-9) contains supplementary material, which is available to authorized users.     

Rapid identification of fungal laccases/oxidases with different pH-optimum

During the last decade the search for novel biotechnologically valuable laccases/oxidases with a high redox potential and concomitant activity under neutral-alkaline conditions is an attractive and at the same time complicated task due to their rare occurrence in nature. By means of the modified micromethod based on the chromogenic reaction with indicator substrates the successful identification of laccases/oxidases with different pH-optimum was carried out during submerged cultivation of 71 fungal strains of different taxonomic groups. Based on more sensitivity (detected laccase activity can be 4–6 time less as compared with the usual spectrophotometric assay of laccase activity), good productivity (measurements of numerous samples at once in small total volume – up to 150 μL), economy and rapidity, the presented modification of chromogenic reaction can be applied for identification of trace amount of laccase/oxidase activity in biological liquids, to determine the chemoselectivity of induced laccase/oxidase isoforms with respect to pH-value of medium, and to monitor the dynamics of expression of alkaliphilic and acidophilic laccases/oxidases during submerged cultivation of fungi.     

Purification and characterization of a novel laccase from Coprinus cinereus and decolorization of different chemically dyes

Laccase is a blue copper oxidase with multiple copper ions and widely distributed in higher plant and fungi. To date, numerous fungal laccases have been reported by many researchers. In present work, a new laccase gene, named CcLCC5I, from Coprinus cinereus was synthesized chemically according to the yeast bias codon and integrated into Pichia pastoris GS115 genome by electroporation. SDS-PAGE analysis showed that the recombinant laccase has a molecular mass of approximately 56.8 kDa. Its biochemical properties was carried out using substrate 2-2^′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS). It was showed that the optimum pH and temperature of the laccase is 3.0 and 55 °C, respectively. Except for copper ions, most metal ions inhibited the laccase activity at a high concentration about 10 mM. Sodium sulfite can also highly inhibit laccase activity whereas EDTA had no inhibitory effect on the laccase activity. The CcLCC5I have high ability to decolor not only azo but also aryl methane dyes. The recombinant laccase decolored 44.6 % orange G, 54.8 % Crystal Violet, and 87.2 % Malachite green at about 2.6 h. The novel laccase may be a good candidate for breeding engineering strains used in the treatment of industrial effluent containing azo and aryl methane dyes.     

Induction, Isolation, and Characterization of Two Laccases from the White Rot Basidiomycete Coriolopsis rigida

Previous work has shown that the white rot fungus Coriolopsis rigida degraded wheat straw lignin and both the aliphatic and aromatic fractions of crude oil from contaminated soils. To better understand these processes, we studied the enzymatic composition of the ligninolytic system of this fungus. Since laccase was the sole ligninolytic enzyme found, we paid attention to the oxidative capabilities of this enzyme that would allow its participation in the mentioned degradative processes. We purified two laccase isoenzymes to electrophoretic homogeneity from copper-induced cultures. Both enzymes are monomeric proteins, with the same molecular mass (66 kDa), isoelectric point (3.9), N-linked carbohydrate content (9%), pH optima of 3.0 on 2,6-dimethoxyphenol (DMP) and 2.5 on 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), absorption spectrum, and N-terminal amino acid sequence. They oxidized 4-anisidine and numerous phenolic compounds, including methoxyphenols, hydroquinones, and lignin-derived aldehydes and acids. Phenol red, an unusual substrate of laccase due to its high redox potential, was also oxidized. The highest enzyme affinity and efficiency were obtained with ABTS and, among phenolic compounds, with 2,6-dimethoxyhydroquinone (DBQH₂). The presence of ABTS in the laccase reaction expanded the substrate range of C. rigida laccases to nonphenolic compounds and that of MBQH₂ extended the reactions catalyzed by these enzymes to the production of H₂O₂, the oxidation of Mn²⁺, the reduction of Fe³⁺, and the generation of hydroxyl radicals. These results confirm the participation of laccase in the production of oxygen free radicals, suggesting novel uses of this enzyme in degradative processes.