Covalent attachment of an Arg-Gly-Asp sequence peptide to derivatizable polyacrylamide surfaces: support of fibroblast adhesion and long-term growth

A synthetic nonapeptide (Tyr-Ala-Val-Thr-Gly-Arg-Gly-Asp-Ser), which includes the adhesive Arg-Gly-Asp (RGD) sequence, was covalently immobilized on chemically well-defined polyacrylamide gel surfaces utilizing N-succinimidyl active esters. The amount of peptide immobilized varied linearly with the concentration added to the gels. Immobilization was approximately 80% efficient (based on peptide added), resulting in up to 17.5 nmol peptide/cm2 gel surface. Balb/c 3T3 mouse fibroblast cells adhered readily to peptide-derivatized surfaces, even in the absence of serum. Furthermore, surfaces derivatized with 2 nmol peptide/cm2 gel supported long-term fibroblast growth at a rate and to an extent comparable to that on tissue culture plastic. Surfaces derivatized with a control nonapeptide having no RGD sequence were nonsupportive of cell attachment or growth. The immobilization technology used to derivatize the gel surfaces with adhesive nonapeptide can be modified to allow coderivatization with proteins, glycoproteins, glycosides, or other amine-containing compounds to test their effects on long-term cell behaviors.     

Modelling biological cell attachment and growth on adherent surfaces

A mathematical model, in the form of an integro-partial differential equation, is presented to describe the dynamics of cells being deposited, attaching and growing in the form of a monolayer across an adherent surface. The model takes into account that the cells suspended in the media used for the seeding have a distribution of sizes, and that the attachment of cells restricts further deposition by fragmenting the parts of the domain unoccupied by cells. Once attached the cells are assumed to be able to grow and proliferate over the domain by a process of infilling of the interstitial gaps; it is shown that without cell proliferation there is a slow build up of the monolayer but if the surface is conducive to cell spreading and proliferation then complete coverage of the domain by the monolayer can be achieved more rapidly. Analytical solutions of the model equations are obtained for special cases, and numerical solutions are presented for parameter values derived from experiments of rat mesenchymal stromal cells seeded onto thin layers of collagen-coated polyethylene terephthalate electrospun fibers. The model represents a new approach to describing the deposition, attachment and growth of cells over adherent surfaces, and should prove useful for studying the dynamics of the seeding of biomaterials.     

Cell attachment on replicas of SDS polyacrylamide gels reveals two adhesive plasma proteins

A novel procedure that detects adhesive proteins in complex mixtures was used to characterize such proteins in plasma. The proteins are separated by SDS PAGE and transferred to nitrocellulose filters. Cells incubated on these filters attach to those proteins that have adhesive properties. When applied to human plasma proteins this procedure reveals, in addition to fibronectin, a cell-attachment protein with a polypeptide molecular weight of 70,000. Using a monoclonal antibody that inhibits attachment of cells to fibronectin, we show that this polypeptide is not a fragment of fibronectin and we present evidence that it is a component of the serum spreading factor. Therefore, as defined by our assay, this protein and fibronectin are the major attachment proteins for fibroblastic cells in plasma or serum.     

Cell surface charge characteristics and their relationship to bacterial attachment to meat surfaces

Cell surface charge and hydrophobicity of Bacillus subtilis, Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Serratia marcescens, Staphylococcus aureus, and Staphylococcus epidermidis were determined by hydrocarbon adherence, hydrophobic interaction, and electrostatic interaction chromatography. Surface charge and hydrophobicity were compared with the initial attachment values and rates of attachment of the bacteria to meat surfaces. There was a linear correlation between the relative negative charge on the bacterial cell surface and initial attachment to lean beef muscle (r2 = 0.885) and fat tissue (r2 = 0.777). Hydrophobicity correlated well with attachment to fat tissue only. The relative hydrophobicity of each bacterium was dependent on the specific method of determination, with wide variations noted between methods.     

Bacterial attachment on optical fibre surfaces

Optical fibres have received considerable attention as high-density sensor arrays suitable for both in vitro and in vivo measurements of biomolecules and biological processes in living organisms and/or nano-environments. The fibre surface was chemically modified by exposure to a selective etchant that preferentially erodes the fibre cores relative to the surrounding cladding material, thus producing a regular pattern of cylindrical wells of approximately 2.5 μm in diameter and 2.5 μm deep. The surface hydrophobicity of the etched and non-etched optical fibres was analysed using the sessile pico-drop method. The surface topography was characterised by atomic force microscopy (AFM), while the surface chemistry was probed by time-of-flight secondary ion mass spectrometry (ToF-SIMS). Six taxonomically different bacterial strains showed a consistent preference for attachment to the nano-scale smoother (R _q = 273 nm), non-etched fibre surfaces (water contact angle, θ = 106° ± 4°). In comparison, the surfaces of the etched optical fibres (water contact angle, θ = 96° ± 10°) were not found to be amenable to bacterial attachment. Bacterial attachment on the non-etched optical fibre substrata varied among different strains.     

Cell surface charge characteristics and their relationship to bacterial attachment to meat surfaces.

Cell surface charge and hydrophobicity of Bacillus subtilis, Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Serratia marcescens, Staphylococcus aureus, and Staphylococcus epidermidis were determined by hydrocarbon adherence, hydrophobic interaction, and electrostatic interaction chromatography. Surface charge and hydrophobicity were compared with the initial attachment values and rates of attachment of the bacteria to meat surfaces. There was a linear correlation between the relative negative charge on the bacterial cell surface and initial attachment to lean beef muscle (r2 = 0.885) and fat tissue (r2 = 0.777). Hydrophobicity correlated well with attachment to fat tissue only. The relative hydrophobicity of each bacterium was dependent on the specific method of determination, with wide variations noted between methods.     

Assessment of resistance towards biocides following the attachment of micro-organisms to, and growth on, surfaces

AIMS: To develop a rapid method for the assessment of biocidal activity directed towards intact biofilms. METHODS AND RESULTS: Escherichia coli and Staphylococcus epidermidis were cultured for up to 48 h within 96-well microtitre plates. The planktonic phase was removed and the wells rinsed. Residual biofilms were exposed to various concentrations of chloroxylenol, peracetic acid, polyhexamethylene biguanide (PHMB), cetrimide or phenoxyethanol for 1 h. At 15-min intervals, biocide was removed, and the wells washed in neutraliser and filled with volumes of fresh medium. Re-growth of the cultures was monitored during incubation at 35 degrees C in the plate reader. Times taken for the treated wells to re-grow to fixed endpoints were determined and related to numbers of surviving cells. Time--survival curves were constructed and the survival of the attached bacteria, following exposure to the agents for 30 min, interpolated for each biocide concentration. Log--log plots of these survival data and biocide concentration were constructed, and linear regression analysis performed in order to (i) calculate concentration exponents and (ii) compare the effectiveness of the biocides between variously aged biofilm and planktonic cells. From such analyses iso-effective concentrations of biocide (95% kill in 30 min) were calculated and expressed as planktonic : biofilm indices (PBI). CONCLUSION: PBI varied between 1.02 and 0.02, were relatively unaffected by age of the biofilms but differed significantly between organism and biocide. Notably those compounds with the higher activity against planktonic bacteria (PHMB and peracetic acid) were most prone to a biofilm effect but remained the most effective of the agents selected. SIGNIFICANCE AND IMPACT OF THE STUDY: The endpoint method proved robust, enabled the bactericidal effects of the biocides to be assessed against in-situ biofilms, and was suitable for routine screening applications.     

Antibacterial surfaces on expanded polytetrafluoroethylene; penicillin attachment

Expanded polytetrafluoroethylene (ePTFE) was chemically modified to retard the growth of Staphylococcus aureus bacteria. This was accomplished by microwave plasma reactions in the presence of maleic anhydride (MA) to create acid functional groups on ePTFE surfaces, followed by esterification reactions with 200 and 600 molecular weight linear polyethylene glycol (PEG). Such surfaces were utilized for further reactions with penicillin (PEN) through etherification reactions to create anti-microbial surfaces. These reactions resulted in surface morphological changes, and spectroscopic analysis using attenuated total reflectance Fourier transform infrared spectroscopy (ATR FT-IR) revealed the formation of ester linkages resulting from reactions between PEN and PEG functionalities. Antibacterial activities were evaluated by a series of experiments where PEN-modified ePTFE specimens were immersed in a liquid aureus culture, and the bacteria growth was quantified by measuring % absorbance of the suspension at 600 nm wavelength. The lowest absorbance was observed for the solution containing PEN-PEG-MA-ePTFE specimens, thus showing highly effective anti-bacterial activity toward gram-positive Staphylococcus aureus bacteria. To our best knowledge, this is the first study that shows PEN-ePTFE surface modifications that are effective against gram-positive aureus bacteria.     

Cell attachment and spreading on extracellular matrix-coated beads

Parietal yolk sac cells M1536-B3 grown on cytodex 2 beads deposited an extracellular matrix on the surface of the beads. Cell-free matrix-coated beads were isolated by treatment of the cell monolayer with cytochalasin B (CB) at a concentration of 10 μg/ml of phosphate-buffered saline (PBS). The matrix when analysed by electrophoresis on polyacrylamide gels (PAGE) revealed that the major components were laminin and entactin. The matrix-coated beads were used to study the attachment, spreading, and growth of African Green monkey BSC-40, human mammary MCF-7, mouse fibroblast L929, rat liver clone 9, and rat hepatoma H-4-II-E cells in defined serum-free growth medium. The different cell lines exhibited varying responses to matrix-coated vs uncoated beads with respect to rate of attachment, spreading, and growth. One of the most consistent responses observed was the enhancement of cell spreading on matrix-coated beads. The results suggested that the matrix-coated beads will provide a readily available and valuable tool for studies on cell surface-extracellular matrix interactions and the physiological consequences of those interactions.     

Cell behaviour on micropatterned surfaces

The local microenvironment of tissue cells has a profound influence on cell behaviour such as cell shape, guidance of movement, and so on. One approach to understanding this phenomenon, which is being applied by a number of groups, is to model possible cues using microfabrication technology. Such techniques have been used to examine the behaviour of a number of cell types. The responses of fibroblasts, epithelial cells and neurones have been determined on a variety of micropatterned surfaces. Conventional photolithographic techniques and laser holography have been employed to define topographic patterns with feature sizes ranging from 25 μm to 130 nm. Photolithography, combined with silanization of glass, has been used to chemically pattern surfaces; this results in differentially adhesive surfaces that mimic possible in vivo cues. The determination of the response of various cell types to these various surfaces has provided detailed information on the biological mechanisms controlling cell behaviour, and on aspects of tissue responses to implanted artificial devices; it has also illustrated the potential for technology utilizing immobilized cellular patterns.     

Lymphocyte locomotion and attachment on two-dimensional surfaces and in three-dimensional matrices

The adhesion and locomotion of mouse peripheral lymph node lymphocytes on 2-D protein- coated substrata and in 3-D matrices were compared. Lymphocytes did not adhere to, or migrate on, 2-D substrata suck as serum- or fibronectin-coated glass. They did attach to and migrate in hydrated 3-D collagen lattices. When the collagen was dehydrated to form a 2-D surface, lymphocyte attachment to it was reduced. We propose that lymphocytes, which are poorly adhesive, are able to attach to and migrate in 3-D matrices by a nonadhesive mechanism such as the extension and expansion of pseudopodia through gaps in the matrix, which could provide purchase for movement in the absence of discrete intermolecular adhesions. This was supported by studies using serum-coated micropore filters, since lymphocytes attached to and migrated into filters with pore sizes large enough (3 or 8 mum) to allow pseudopod penetration but did not attach to filters made of an identical material (cellulose esters) but of narrow pore size (0.22 or 0.45 mum). Cinematographic studies of lymphocyte locomotion in collagen gels were also consistent with the above hypothesis, since lymphocytes showed a more variable morphology than is typically seen on plane surfaces, with formation of many small pseudopodia expanded to give a marked constriction between the cell and the pseudopod. These extensions often remained fixed with respect to the environment as the lymphocyte moved away from or past them. This suggests that the pseudopodia were inserted into gaps in the gel matrix and acted as anchorage points for locomotion.     

Protein-coated agarose surfaces for attachment of cells

Summary Plastic dishes were coated with an agarose layer. The layer was modified by covalently binding proteins to it, using the CNBr-method. Cells were seeded on the dishes and the number of attached cells was evaluated. The specificity of the attachment, was demonstrated by showing that cells, carrying specific membrane-bound immunoglobulins, attached only to the corresponding anti-immunoglobulins This indicated that the method could be used for cell sorting. The attachment of cells to proteins was influnced, by the amount of bound protein, incubation time temperature and the degree of trypsinization. Most attached cells were viable for several days and when dying they detached. Detailed morphological and cytochemical analyses of the dynamics of attachment, and cytoplasmic spreading on the chemically well-defined surfaces were possible using the new method. The work has been supported financially by the Swedish Cancer Society and the Swedish Natural Science Research Council. Box 531. Box 533.     

Protein-coated agarose surfaces for attachment of cells

Plastic dishes were coated with an agarose layer. The layer was modified by covalently binding proteins to it, using the CNBr-method. Cells were seeded on the dishes and the number of attached cells was evaluated. The specificity of the attachment was demonstrated by showing that cells, carrying specific membrane-bound immunoglobulins, attached only to the corresponding anti-immunoglobulins. This indicated that the method could be used for cell sorting. The attachment of cells to proteins was influenced by the amount of bound protein, incubation time, temperature and the degree of trypsinization. Most attached cells were viable for several days and when dying they detached. Detailed morphological and cytochemical analyses of the dynamics of attachment and cytoplasmic spreading on the chemically well-defined surfaces were possible using the new method.     

Influence of substratum hydration and adsorbed macromolecules on bacterial attachment to surfaces

The attachment of Pseudomonas fluorescens and an Acinetobacter sp. to hydrogel and polystyrene surfaces was investigated to evaluate the influence of adsorbed water and macromolecules on adhesion. With both organisms, there was a decrease in attachment numbers with increasing water content of the hydrogels. There was also a decrease in attachment with a decrease in water contact angle on untreated, tissue culture and sulfonated polystyrene surfaces; however, the attachment numbers were higher than would be expected on the basis of the hydrogel data. With P. fluorescens, attachment to untreated and tissue culture polystyrene was inhibited by bovine serum albumin, Escherichia coli lipopolysaccharide, and the supernatant from spent medium, both when the conditioning substances were added to the suspension of attaching cells and when they were preadsorbed onto the surfaces. Dextran inhibited attachment only when added to the bacterial suspension. Supernatants from centrifuged natural freshwater samples had no effect. Thus, hydration of a surface and the adsorption of macromolecules can reduce bacterial attachment; however, additional factors relating to the chemical composition of the substratum and polymeric stabilization of suspended cells can affect the adhesion interaction and resultant numbers of attached cells.     

Formation of non-spheroidal aggregates by adult rat hepatocytes on polyacrylamide coated surfaces

Summary Adult rat hepatocytes in primary culture formed floating, non-spheroidal aggregates on the surfaces coated with 1 % polyacrylamide. In the cells of aggregates, DNA synthetic capacity was limited, but albumin secreting capacity was maintained at least for 2 weeks. These properties were influenced by addition of serum.     

Ultralow fouling polyacrylamide on gold surfaces via surface-initiated atom transfer radical polymerization

In this work, polyacrylamide is investigated as an ultralow fouling surface coating to highly resist protein adsorption, cell adhesion, and bacterial attachment. Polyacrylamide was grafted on gold surfaces via surface-initiated atom transfer radical polymerization (ATRP). Protein adsorption from a wide range of biological media, including single protein solutions of fibrinogen, bovine serum albumin, and lysozyme, dilute and undiluted human blood serum, and dilute and undiluted human blood plasma, was studied by surface plasmon resonance (SPR). Dependence of the protein resistance on polyacrylamide film thickness was examined. With the optimal film thickness, the adsorption amount of all three single proteins on polyacrylamide-grafted surfaces was <3 pg/mm(2), close to the detection limit of SPR. The average nonspecific adsorptions from 10% plasma, 10% serum, 100% plasma, and 100% serum onto the polyacrylamide-grafted surfaces were 5, 6.5, 17, and 28 pg/mm(2), respectively, comparable (if not better) than the adsorption levels on poly(ethylene glycol) (PEG) and zwitterionic poly(sulfobetaine methacrylate) surfaces, the best antifouling materials known to date. The polyacrylamide-grafted surfaces were also shown strongly resistant to adhesion from bovine aortic endothelial cells and two bacterial species, Gram-positive Staphylococcus epidermidis ( S. epidermidis ) and Gram-negative Pseudomonas aeruginosa ( P. aeruginosa ). Strong hydrogen bond with water is considered the key attribute for the ultralow fouling properties of polyacrylamide. This is the first work to graft gold surfaces with polyacrylamide brushes via ATRP to achieve ultralow fouling surfaces, demonstrating that polyacrylamide is a promising alternative to traditional PEG-based antifouling materials.