Space-charge-limited current in a plane vacuum diode discharged by an electron current pulse

An unsteady discharge of a relativistic vacuum diode is studied analytically. The amplitude and rise time of the discharge current pulse are determined as functions of the input parameters of the problem. It is found that, in a nonrelativistic limit, the maximum attainable amplitude of the discharge current pulse is equal to J_Alim = 9/4J_CL, where J_CL is the vacuum-diode limiting current prescribed by the 3/2 law. The parameters of the dipole moment of the layer formed above the grid anode are found in the nonrelativistic limit.     

Study of the core-corona structure formed during the explosion of an aluminum wire in vacuum

The time evolution of the matter parameters and current distribution in the discharge channel formed during a nanosecond explosion of a 25-μm-diameter 12-mm-long aluminum wire was studied in a series of experiments with the following parameters: the discharge voltage was U ₀ = 20 kV, the current amplitude was I _max ∼ 8 kA, and the current rise rate was dI/dt ∼ 40 A/ns. Optical shadow and schlieren images of the discharge channel were obtained using the second harmonic of a YAG: Nd⁺³ laser, and UV images of the discharge channel self-radiation were recorded using a four-frame camera with a microchannel plate. The process of aluminum wire explosion was simulated numerically (including simulations performed from the “cold start”). The numerical results were compared with the experimental data.     

Dispersal of motile bacteria from a plane layer.

The dispersal of an initially well-defined concentration of the motile bacterium Escherichia coli was measured under nonchemotactic conditions. The distribution of bacteria along a glass observation cell was measured by recording the intensity of light scattered by the organisms. For comparison, the diffusion of fluorescein was also measured by determining the distribution of fluorescence throughout the observation cell. The dispersal of bacteria from a plane layer, under nonchemotactic conditions, can be adequately described by the Gaussian solution of the diffusion equation.     

Prediction of biomechanical parameters in the lumbar spine during static sagittal plane lifting.

A combined approach involving optimization and the finite element technique was used to predict biomechanical parameters in the lumbar spine during static lifting in the sagittal plane. Forces in muscle fascicles of the lumbar region were first predicted using an optimization-based force model including the entire lumbar spine. These muscle forces as well as the distributed upper body weight and the lifted load were then applied to a three-dimensional finite element model of the thoracolumbar spine and rib cage to predict deformation, the intradiskal pressure, strains, stresses, and load transfer paths in the spine. The predicted intradiskal pressures in the L3-4 disk at the most deviated from the in vivo measurements by 8.2 percent for the four lifting cases analyzed. The lumbosacral joint flexed, while the other lumbar joints extended for all of the four lifting cases studied (rotation of a joint is the relative rotation between its two vertebral bodies). High stresses were predicted in the posterolateral regions of the endplates and at the junctions of the pedicles and vertebral bodies. High interlaminar shear stresses were found in the posterolateral regions of the lumbar disks. While the facet joints of the upper two lumbar segments did not transmit any load, the facet joints of the lower two lumbar segments experienced significant loads. The ligaments of all lumbar motion segments except the lumbosacral junction provided only marginal moments. The limitations of the current model and possible improvements are discussed.     

Measurements of high voltage across the vacuum diode of a high-current generator by using photoneutron reactions

A new method is proposed for measuring the voltage across the vacuum diode of a high-current generator by determining the high-energy edge of bremsstrahlung from an electron beam with the help of photoneutron reactions. The method is approved in the RS-20 facility with a plasma opening switch. The results obtained by using this technique are in good agreement with the data from electrotechnical measurements.     

Study of the parameters of hydrogen-titanium plasma in a pulsed reflective discharge

The parameters of a dense (10¹³–10¹⁴ cm⁻³) plasma produced by ionization of a H₂ + Ti mixture in a moderate-power (W ≤ 10 MW) pulsed reflective discharge are investigated. The dynamics of the plasma density, the elemental composition of the generated plasma, the radial distribution of the electron density, the rotation velocity and frequency of the plasma layer with n _p ≥ n _cr, the radial electric field, the coefficient of plasma particle separation, and the coefficient of plasma recombination in the stage of plasma decay are determined.     

Study of the plasma parameters in a high-current pulsed magnetron sputtering system

Results are presented from experimental studies of the current-voltage characteristics and spatial and temporal parameters of the plasma in a high-current pulsed magnetron sputtering system with a 10-cm-diameter plane disk cathode. It is shown that the plasma density in such a system is three orders of magnitude higher than that in conventional dc magnetron discharges and reaches 10¹³ cm⁻³ at a distance of 250 mm from the cathode at a peak discharge current of 500 A. The plasma propagates from the cathode region at a velocity of 1 cm/μs in the axial direction and 0.25 cm/μs in the radial direction. Optical emission spectroscopy shows that the degree of plasma ionization increases severalfold with increasing discharge current, mainly at the expense of the sputtered material.     

Dynamic visuomotor transformation involved with remote flying of a plane utilizes the 'Mirror Neuron' system

Brain regions involved with processing dynamic visuomotor representational transformation are investigated using fMRI. The perceptual-motor task involved flying (or observing) a plane through a simulated Red Bull Air Race course in first person and third person chase perspective. The third person perspective is akin to remote operation of a vehicle. The ability for humans to remotely operate vehicles likely has its roots in neural processes related to imitation in which visuomotor transformation is necessary to interpret the action goals in an egocentric manner suitable for execution. In this experiment for 3(rd) person perspective the visuomotor transformation is dynamically changing in accordance to the orientation of the plane. It was predicted that 3(rd) person remote flying, over 1(st), would utilize brain regions composing the 'Mirror Neuron' system that is thought to be intimately involved with imitation for both execution and observation tasks. Consistent with this prediction differential brain activity was present for 3(rd) person over 1(st) person perspectives for both execution and observation tasks in left ventral premotor cortex, right dorsal premotor cortex, and inferior parietal lobule bilaterally (Mirror Neuron System) (Behaviorally: 1(st)>3(rd)). These regions additionally showed greater activity for flying (execution) over watching (observation) conditions. Even though visual and motor aspects of the tasks were controlled for, differential activity was also found in brain regions involved with tool use, motion perception, and body perspective including left cerebellum, temporo-occipital regions, lateral occipital cortex, medial temporal region, and extrastriate body area. This experiment successfully demonstrates that a complex perceptual motor real-world task can be utilized to investigate visuomotor processing. This approach (Aviation Cerebral Experimental Sciences ACES) focusing on direct application to lab and field is in contrast to standard methodology in which tasks and conditions are reduced to their simplest forms that are remote from daily life experience.     

Amplified expression of a transcriptional pattern formed during development of Anabaena

The cyanobacterium Anabaena responds to nitrogen deprivation by producing heterocysts, cells specialized for nitrogen fixation, at well-spaced intervals along its filaments. The gene hepA, required for heterocyst maturation, is expressed in response to nitrogen deprivation, prior to visible differentiation. A spatial pattern of hepA expression indistinguishable from the eventual pattern of heterocysts was made visible by fusing the hepA promoter to luxAB, which encodes bacterial luciferase. Because the resulting signal did not greatly exceed instrumental background, T7 RNA polymerase was used to increase luminescence. The hepA promoter was fused to the gene for that polymerase, and a promoter recognized by that polymerase was fused to luxAB. Filaments containing these two fusions showed spaced luminescing cells many hours before differentiation became discernible morphologically.     

Characterization of products formed during the autoxidation of beta-carotene

The anticarcinogenic action of carotenoids such as beta-carotene has been frequently ascribed to their antioxidant properties. However, very little is actually known about the nature of the antioxidant reaction or the products that are formed. beta-Carotene was exposed to either spontaneous autoxidation conditions or to radical-initiated autoxidation conditions. The products were separated by reverse-phase HPLC, and individual peaks were characterized with an on-line diode array detector. Carbonyl products were isolated and characterized by several procedures, including borohydride reduction to the corresponding alcohols, derivatization with O-ethyl-hydroxylamine to the corresponding O-ethyl-oximes of the carbonyls, and analysis by GC-MS. Under the conditions of the experiments, the formation of a homologous series of carbonyl products was demonstrated, including beta-apo-13-carotenone, retinal, beta-apo-14'-carotenal, beta-apo-12'-carotenal, and beta-apo-10'-carotenal. Several very hydrophobic compounds were formed, which have not been previously identified. In addition, the products of NaOCl-treatment of beta-carotene were analyzed, and shown to be significantly different from the autoxidation products. This type of product analysis should be useful in determining the nature of the oxidants reacting with beta-carotene in vivo.     

Characterization of a transient covalent adduct formed during dimethylarginine dimethylaminohydrolase catalysis

Dimethylarginine dimethylaminohydrolase (DDAH) regulates the concentrations of human endogenous inhibitors of nitric oxide synthase, N(omega)-methyl-l-arginine (NMMA), and asymmetric N(omega),N(omega)-dimethyl-l-arginine (ADMA). Pharmacological regulation of nitric oxide synthesis is an important goal, but the catalytic mechanism of DDAH remains largely unexplored. A DDAH from Pseudomonas aeruginosa was cloned, and asymmetrically methylated arginine analogues were shown to be the preferred substrates, with ADMA displaying a slightly higher k(cat)/K(M) value than NMMA. DDAH is similar to members of a larger superfamily of guanidino-modifying enzymes, some of which have been shown to use an S-alkylthiouronium intermediate during catalysis. No covalent intermediates were found to accumulate during steady-state turnover reactions of DDAH with NMMA or ADMA. However, identification of a new substrate with an activated leaving group, S-methyl-l-thiocitrulline (SMTC), enabled acid trapping and ESI-MS characterization of a transient covalent adduct with a mass of 158 +/- 10 Da that accumulates during steady-state turnover. Subsequent trapping, proteolysis, peptide mapping and fragmentation by mass spectrometry, and site-directed mutagenesis demonstrated that this covalent adduct was attached to an active site residue and implicates Cys249 as the catalytic nucleophile required for intermediate formation. The use of covalent catalysis clearly links DDAH to this superfamily of enzymes and suggests that an S-alkylthiouronium intermediate may be a conserved feature in their mechanisms.     

Uterine luminal proteins and estrogens in gilts on a normal nutritional plane during the estrous cycle and on a normal or high nutritional plane during early pregnancy

In gilts, a high plane of nutrition during early pregnancy often results in increased embryo mortality, possibly related to changes in embryo-uterine asynchrony at a critical stage of pregnancy (around Day 11). Therefore, in the present study, uterine luminal proteins and estrogens were studied between Days 5 and 16 after the onset of estrus in gilts on either a normal (2.5 kg/d, cyclic and pregnant gilts) or a high (4.0 kg/d, pregnant gilts only) feeding level. Conceptus recovery rate between Days 5 and 12 was not affected by the feeding level during early pregnancy, neither were systemic progesterone levels. Between Days 9 and 11, dramatic changes took place in the protein composition of the uterine luminal 10kD+ proteins, shifting from most (90%) of the acidic proteins at Day 5 and 7 to approximately 50% at Day 11/12, especially due to an increase in basic proteins with an iso-electrical point of more than 8. This shift occurred most rapidly for the pregnant gilts at the high feeding level and least rapidly in the cyclic gilts, resulting in significant differences in the relative amount of acidic proteins at Day 10 and 11 after the onset of estrus (P < 0.05). Similarly, levels of estrogens in the uterine flushings at Days 10, 11 and 12 were always highest for the pregnant gilts on the high feeding level and were always lowest in the cyclic gilts (P < 0.05); pregnant gilts on the normal feeding level showed intermediate estrogen levels. The fact that gilts on a high feeding level during early pregnancy show more rapid changes in the uterine luminal protein composition and embryonic estrogen production seems to suggest that the rate of these changes may be related to embryo survival.     

Determination of the parameters of the hot plasma formed during the implosion of wire arrays from time-resolved X-ray spectra of H- and He-like ions

A system for recording X-ray ion spectra by means of a spherical crystal with the subsequent transformation of the X-ray spectrum into an optical image recorded with the help of an optical streak camera is described. A computer code intended to recover the plasma parameters from the intensities of spectral lines of H- and He-like ions of some chemical elements (z = 6–29) is developed. Results of experiments on the determination of the parameters of hot plasma formed during the implosion of nested aluminum wire arrays at the S-300 high-current generator are presented.     

三峡水库泄水期消落带土壤微生物活性

以三峡库区香溪河消落带土壤为对象,研究泄水期(5-8月)消落带不同海拔土壤理化性质及微生物活性,旨在揭示三峡库区消落带土壤质量变化趋势.结果表明:随着海拔降低、淹水强度增强,消落带土壤含水量增加,pH值上升,土壤微生物生物量和微生物熵逐渐降低,土壤代谢熵显著增加,干湿交替区165 m以下土壤代谢熵显著高于未淹没区175 ～185 m.表明香溪河消落带低海拔土壤受江水淹没胁迫,pH值趋于碱性,土壤环境质量降低,不适宜微生物的生长.消落带各海拔土壤SOC、TN和C/N无显著差异;但干湿交替区土壤SOC、TN和C/N的变异系数降低,表明干湿交替是影响库区消落带土壤碳、氮分布的重要因子.相关分析显示,土壤C/N与SOC呈极显著正相关,说明香溪河消落带C/N的变化主要由SOC决定.     

The effect of dipole potential of lipid bilayers on the properties of ion channels formed by cyclic lipodepsipeptide syringomycin E

The effect of membrane dipole potential (? _d ) on the properties of ion channels formed in bilayer lipid membranes by syringomycin E (SRE), a toxin produced by Pseudomonas syringae, has been studied. It has been shown that ? _d affects the conductance and lifetime of elementary SRE channels as well as their cluster organization, in particular, the number of elementary channels synchronously opened in the cluster and the lifetime of these clusters. The channel-forming activity of SRE was found to be ? _d -dependent. The analysis of experimental data has revealed that (i) the mechanisms of the observed effects involve the dipole-dipole and charge-dipole interactions responsible for the cooperative functioning of the elementary SRE channels; (ii) about 95% of membrane dipole potential is shielded in the SRE pore; and (iii) the channel-forming activity of SRE is mainly determined by the gating charge of the SRE channels. At the same time, the partition coefficient for the toxin distribution between the membrane and aqueous phase as well as the chemical component of the channel formation work are also responsible for the ? _d -dependence of the SRE channel forming activity.     

Study of the core gaps formed accidentally during wire explosion

During wire explosion, along with striations (a regular structure with alternating lower and higher density bands), low-density regions the characteristic axial size of which differs substantially from that of striations and can reach 1–2 mm are also observed in the discharge channel. Such irregular structures came to be known as “gaps” (D. B. Sinars et al., Phys. Plasmas 8, 216 (2001)). In the present study, the mechanism of the formation of core gaps during explosions of 25- and 50-μm-diameter copper and nickel wires in air is investigated. It is shown that the specific energy deposited in the gap region substantially exceeds the average specific energy deposited in the wire material.     

Dependence of the response of an amperometric biosensor formed in a micro flow channel on structural and conditional parameters

Comprehensive analysis of the behavior of an amperometric biosensor incorporated in a micro flow channel was conducted by changing the structural and conditional parameters. The device used in the characterization consisted of a thin-film three-electrode system and a silicone rubber flow channel. An enzyme, glucose oxidase, was immobilized either at the bottom of the silicone rubber flow channel or on the electrode substrate. The flow rate, concentration, position of the immobilized enzyme, and channel height were changed, and the changes in the output current and the conversion efficiency were examined. When the flow rate and/or the channel height decreased, the output current and the conversion efficiency significantly increased. The conversion efficiency also increased by decreasing the concentration. The tendency of the flow dependence was reversed when the position of the immobilized enzyme was changed from the silicone rubber side to the electrode substrate. In addition, the influence of l-ascorbic acid was reduced by placing additional working electrodes in the upper stream. l-Ascorbic acid was eliminated more effectively as the flow rate decreased and the area of the working electrode for elimination increased.