Mutational replacements in subtilisin 309. Val104 has a modulating effect on the P4 substrate preference.

The previous notion that the amino acid side chain at position 104 of subtilisins is involved in the binding of the side chain at position P4 of the substrate has been investigated. The amino acid residue Val104 in subtilisin 309 has been replaced by Ala, Arg, Asp, Phe, Ser, Trp and Tyr by site-directed mutagenesis. It is shown that the P4 specificity of this enzyme is not determined solely by the amino acid residue occupying position 104, as the enzyme exhibits a marked preference for aromatic groups in P4, regardless of the nature of the position-104 residue. With hydrophilic amino acid residues at this position, no involvement is seen in binding of either hydrophobic or hydrophilic amino acid residues at position P4 of the substrates. The substrate with Asp in P4 is an exception, as the preference for this substrate is increased dramatically by introduction of an arginine residue at position 104 in the enzyme, presumably due to a substrate-induced conformational change. However, when position 104 is occupied by hydrophobic residues, it is highly involved in binding of hydrophobic amino acid residues, either by increasing the hydrophobicity of S4 or by determining the size of the pocket. The results suggest that the amino acid residue at position 104 is mobile such that it is positioned in the S4 binding site only when it can interact favourably with the substrate's side chain at position P4.     

Crystal structure of the high-alkaline serine protease PB92 from Bacillus alcalophilus.

The crystal structure of a serine protease from the alkalophilic strain Bacillus alcalophilus PB92 has been determined by X-ray diffraction at 1.75 A resolution. The structure has been solved by molecular replacement using the atomic model of subtilisin Carlsberg. The model of the PB92 protease has been refined to an R-factor of 14.0% and contains 1882 protein atoms, two calcium ions and 188 water molecules. The overall folding of the polypeptide chain closely resembles that of the subtilisins. Furthermore, almost all of the secondary structure elements found in subtilisin Carlsberg are also present in the PB92 protease. The major differences between the two structures are located around the deletion regions (residues 37 and 158-161 in subtilisin Carlsberg) and in two loops which are known to be the most variable parts of subtilisin structures. Flexibility of one of these loops (residues 126-130 in the PB92 protease) is believed to account for the induced-fit mechanism of substrate binding.     

Studies of specificity and catalysis in trypsin by structural analysis of site-directed mutants

We are probing the determinants of catalytic function and substrate specificity in serine proteases by kinetic and crystallographic characterization of genetically engineered site-directed mutants of rat trypsin. The role of the aspartyl residue at position 102, common to all members of the serine protease family, has been tested by substitution with asparagine. In the native enzyme, Asp102 accepts a hydrogen bond from the catalytic base His57, which facilitates the transfer of a proton from the enzyme nucleophile Ser195 to the substrate leaving group. At neutral pH, the mutant is four orders of magnitude less active than the naturally occurring enzyme, but its binding affinity for model substrates is virtually undiminished. Crystallographic analysis reveals that Asn102 donates a hydrogen bond to His57, forcing it to act as donor to Ser195. Below pH 6, His57 becomes statistically disordered. Presumably, the di-protonated population of histidyl side chains are unable to hydrogen bond to Asn102. Steric conflict may cause His57 to rotate away from the catalytic site. These results suggest that Asp102 not only provides inductive and orientation effects, but also stabilizes the productive tautomer of His57. Three experiments were carried out to alter the substrate specificity of trypsin. Glycine residues at positions 216 and 226 in the substrate-binding cavity were replaced by alanine residues in order to differentially affect lysine and arginine substrate binding. While the rate of catalysis by the mutant enzymes was reduced in the mutant enzymes, their substrate specificity was enhanced relative to trypsin. The increased specificity was caused by differential effects on the catalytic activity towards arginine and lysine substrates. The Gly----Ala substitution at 226 resulted in an altered conformation of the enzyme which is converted to an active trypsin-like conformation upon binding of a substrate analog. In a third experiment, Lys189, at the bottom of the specificity pocket, was replaced with an aspartate with the expectation that specificity of the enzyme might shift to aspartate. The mutant enzyme is not capable of cleaving at Arg and Lys or Asp, but shows an enhanced chymotrypsin-like specificity. Structural investigations of these mutants are in progress.     

Caspase-3 binds diverse P4 residues in peptides as revealed by crystallography and structural modeling

Caspase-3 recognition of various P4 residues in its numerous protein substrates was investigated by crystallography, kinetics, and calculations on model complexes. Asp is the most frequent P4 residue in peptide substrates, although a wide variety of P4 residues are found in the cellular proteins cleaved by caspase-3. The binding of peptidic inhibitors with hydrophobic P4 residues, or no P4 residue, is illustrated by crystal structures of caspase-3 complexes with Ac-IEPD-Cho, Ac-WEHD-Cho, Ac-YVAD-Cho, and Boc-D(OMe)-Fmk at resolutions of 1.9–2.6 Å. The P4 residues formed favorable hydrophobic interactions in two separate hydrophobic regions of the binding site. The side chains of P4 Ile and Tyr form hydrophobic interactions with caspase-3 residues Trp206 and Trp214 within a non-polar pocket of the S4 subsite, while P4 Trp interacts with Phe250 and Phe252 that can also form the S5 subsite. These interactions of hydrophobic P4 residues are distinct from those for polar P4 Asp, which indicates the adaptability of caspase-3 for binding diverse P4 residues. The predicted trends in peptide binding from molecular models had high correlation with experimental values for peptide inhibitors. Analysis of structural models for the binding of 20 different amino acids at P4 in the aldehyde peptide Ac-XEVD-Cho suggested that the majority of hydrophilic P4 residues interact with Phe250, while hydrophobic residues interact with Trp206, Phe250, and Trp214. Overall, the S4 pocket of caspase-3 exhibits flexible adaptation for different residues and the new structures and models, especially for hydrophobic P4 residues, will be helpful for the design of caspase-3 based drugs.     

The specificity of carboxypeptidase Y may be altered by changing the hydrophobicity of the S'1 binding pocket.

The S'1 binding pocket of carboxypeptidase Y is hydrophobic, spacious, and open to solvent, and the enzyme exhibits a preference for hydrophobic P'1 amino acid residues. Leu272 and Ser297, situated at the rim of the pocket, and Leu267, slightly further away, have been substituted by site-directed mutagenesis. The mutant enzymes have been characterized kinetically with respect to their P'1 substrate preferences using the substrate series FA-Ala-Xaa-OH (Xaa = Leu, Glu, Lys, or Arg) and FA-Phe-Xaa-OH (Xaa = Ala, Val, or Leu). The results reveal that hydrophobic P'1 residues bind in the vicinity of residue 272 while positively charged P'1 residues interact with Ser297. Introduction of Asp or Glu at position 267 greatly reduced the activity toward hydrophobic P'1 residues (Leu) and increased the activity two- to three-fold for the hydrolysis of substrates with Lys or Arg in P'1. Negatively charged substituents at position 272 reduced the activity toward hydrophobic P'1 residues even more, but without increasing the activity toward positively charged P'1 residues. The mutant enzyme L267D + L272D was found to have a preference for substrates with C-terminal basic amino acid residues. The opposite situation, where the positively charged Lys or Arg were introduced at one of the positions 267, 272, or 297, did not increase the rather low activity toward substrates with Glu in the P'1 position but greatly reduced the activity toward substrates with C-terminal Lys or Arg due to electrostatic repulsion. The characterized mutant enzymes exhibit various specificities, which may be useful in C-terminal amino acid sequence determinations.     

Roles of s3 site residues of nattokinase on its activity and substrate specificity

Nattokinase (Subtilisin NAT, NK) is a bacterial serine protease with high fibrinolytic activity. To probe their roles on protease activity and substrate specificity, three residues of S3 site (Gly(100), Ser(101) and Leu(126)) were mutated by site-directed mutagenesis. Kinetics parameters of 20 mutants were measured using tetrapeptides as substrates, and their fibrinolytic activities were determined by fibrin plate method. Results of mutation analysis showed that Gly(100) and Ser(101) had reverse steric and electrostatic effects. Residues with bulky or positively charged side chains at position 100 decreased the substrate binding and catalytic activity drastically, while residues with the same characters at position 101 could obviously enhance protease and fibrinolytic activity of NK. Mutation of Leu(126) might impair the structure of the active cleft and drastically decreased the activity of NK. Kinetics studies of the mutants showed that S3 residues were crucial to keep protease activity while they moderately affected substrate specificity of NK. The present study provided some original insight into the P3-S3 interaction in NK and other subtilisins, as well as showed successful protein engineering cases to improve NK as a potential therapeutic agent.     

Multiple pocket recognition of SNAP25 by botulinum neurotoxin serotype E

Botulinum neurotoxins (BoNTs) are zinc proteases that cleave SNARE proteins to elicit flaccid paralysis by inhibiting the fusion of neurotransmitter-carrying vesicles to the plasma membrane of peripheral neurons. There are seven serotypes of BoNT, termed A-G. The molecular basis for SNAP25 recognition and cleavage by BoNT serotype E is currently unclear. Here we define the multiple pocket recognition of SNAP25 by LC/E. The initial recognition of SNAP25 is mediated by the binding of the B region of SNAP25 to the substrate-binding (B) region of LC/E comprising Leu166, Arg167, Asp127, Ala128, Ser129, and Ala130. The mutations at these residues affected substrate binding and catalysis. Three additional residues participate in scissile bond cleavage of SNAP25 by LC/E. The P3 site residues, Ile178, of SNAP25 interacted with the S3 pocket in LC/E through hydrophobic interactions. The S3 pocket included Ile47, Ile164, and Ile182 and appeared to align the P1' and P2 residues of SNAP25 with the S1' and S2 pockets of LC/E. The S1' pocket of LC/E included three residues, Phe191, Thr159, and Thr208, which contribute hydrophobic and steric interactions with the SNAP25 P1' residue Ile181. The S2 pocket residue of LC/E, Lys224, binds the P2 residue of SNAP25, Asp179, through ionic interactions. Deletion mapping indicates that main chain interaction(s) of residues 182-186 of SNAP25 contribute to substrate recognition by LC/E. Understanding the mechanism for substrate specificity provides insight for the development of inhibitors against the botulinum neurotoxins.     

Amino acid sequence and some properties of phytolacain G, a cysteine protease from growing fruit of pokeweed, Phytolacca americana

A protease, phytolacain G, has been found to appear on CM-Sepharose ion-exchange chromatography of greenish small-size fruits of pokeweed, Phytolacca americana L, from ca. 2 weeks after flowering, and increases during fruit enlargement. Reddish ripe fruit of the pokeweed contained both phytolacain G and R. The molecular mass of phytolacain G was estimated to be 25.5 kDa by SDS-PAGE. Its amino acid sequence was reconstructed by automated sequence analysis of the peptides obtained after cleavage with Achromobacter protease I, chymotrypsin, and cyanogen bromide. The enzyme is composed of 216 amino acid residues, of which it shares 152 identical amino acid residues (70%) with phytolacain R, 126 (58%) with melain G, 108 (50%) with papain, 106 (49%) with actinidain, and 96 (44%) with stem bromelain. The amino acid residues forming the substrate binding S(2) pocket of papain, Tyr67, Pro68, Trp69, Val133, and Phe207, were predicted to be replaced by Trp, Met, His, Ala, and Ser in phytolacain G, respectively. As a consequence of these substitutions, the S(2) pocket is expected to be less hydrophobic in phytolacain G than in papain.     

Structure-function studies of nerve growth factor: functional importance of highly conserved amino acid residues.

Selected amino acid residues in chicken nerve growth factor (NGF) were replaced by site-directed mutagenesis. Mutated NGF sequences were transiently expressed in COS cells and the yield of NGF protein in conditioned medium was quantified by Western blotting. Binding of each mutant to NGF receptors on PC12 cells was evaluated in a competition assay. The biological activity was determined by measuring stimulation of neurite outgrowth from chick sympathetic ganglia. The residues homologous to the proposed receptor binding site of insulin (Ser18, Met19, Val21, Asp23) were substituted by Ala. Replacement of Ser18, Met19 and Asp23 did not affect NGF activity. Modification of Val21 notably reduced both receptor binding and biological activity, suggesting that this residue is important to retain a fully active NGF. The highly conserved Tyr51 and Arg99 were converted into Phe and Lys respectively, without changing the biological properties of the molecule. However, binding and biological activity were greatly impaired after the simultaneous replacement of both Arg99 and Arg102 by Gly. The three conserved Trp residues at positions 20, 75 and 98 were substituted by Phe. The Trp mutated proteins retained 15-60% of receptor binding and 40-80% of biological activity, indicating that the Trp residues are not essential for NGF activity. However, replacement of Trp20 significantly reduced the amount of NGF in the medium, suggesting that this residue may be important for protein stability.     

Mutational analysis of the primary substrate specificity pocket of complement factor B. Asp(226) is a major structural determinant for p(1)-Arg binding

Factor B is a serine protease, which despite its trypsin-like specificity has Asn instead of the typical Asp at the bottom of the S(1) pocket (position 189, chymotrypsinogen numbering). Asp residues are present at positions 187 and 226 and either one could conceivably provide the negative charge for binding the P(1)-Arg of the substrate. Determination of the crystal structure of the factor B serine protease domain has revealed that the side chain of Asp(226) is within the S(1) pocket, whereas Asp(187) is located outside the pocket. To investigate the possible role of these atypical structural features in substrate binding and catalysis, we constructed a panel of mutants of these residues. Replacement of Asp(187) caused moderate (50-60%) decrease in hemolytic activity, compared with wild type factor B, whereas replacement of Asn(189) resulted in more profound reductions (71-95%). Substitutions at these two positions did not significantly affect assembly of the alternative pathway C3 convertase. In contrast, elimination of the negative charge from Asp(226) completely abrogated hemolytic activity and also affected formation of the C3 convertase. Kinetic analyses of the hydrolysis of a P(1)-Arg containing thioester by selected mutants confirmed that residue Asp(226) is a primary structural determinant for P(1)-Arg binding and catalysis.     

Forced Dissociation of the Strand Dimer Interface between C-Cadherin Ectodomains

The force-induced dissociation of the strand dimer interface in C-cadherin has been studied using steered molecular dynamics simulations. The dissociation occurred, without domain unraveling, after the extraction of the conserved trypthophans (Trp2) from their respective hydrophobic pockets. The simulations revealed two stable positions for the Trp2 side chain inside the pocket. The most internal stable position involved a hydrogen bond between the ring Ne of Trp2 and the backbone carbonyl of Glu90. In the second stable position, the aromatic ring is located at the pocket entrance. After extracting the two tryptophans from their pockets, the complex exists in an intermediate bound state that involves a close packing of the tryptophans with residues Asp1 and Asp27 from both domains. Dissociation occurred after this residue association was broken. Simulations carried out with a complex formed between W2A mutants showed that the mutant complex dissociates more easily than the wild type complex does. These results correlate closely with the role of the conserved tryptophans suggested previously by site directed mutagenesis.     

Kinetic and crystallographic analysis of mutant Escherichia coli aminopeptidase P: insights into substrate recognition and the mechanism of catalysis

Aminopeptidase P (APPro) is a manganese-dependent enzyme that cleaves the N-terminal amino acid from polypeptides where the second residue is proline. APPro shares a similar fold, substrate specificity, and catalytic mechanism with methionine aminopeptidase and prolidase. To investigate the roles of conserved residues at the active site, seven mutant forms of APPro were characterized kinetically and structurally. Mutation of individual metal ligands selectively abolished binding of either or both Mn(II) atoms at the active site, and none of these metal-ligand mutants had detectable catalytic activity. Mutation of the conserved active site residues His243 and His361 revealed that both are required for catalysis. We propose that His243 stabilizes substrate binding through an interaction with the carbonyl oxygen of the requisite proline residue of a substrate and that His361 stabilizes substrate binding and the gem-diol catalytic intermediate. Sequence, structural, and kinetic analyses reveal that His350, conserved in APPro and prolidase but not in methionine aminopeptidase, forms part of a hydrophobic binding pocket that gives APPro its proline specificity. Further, peptides in which the required proline residue is replaced by N-methylalanine or alanine are cleaved by APPro, but they are extremely poor substrates due to a loss of interactions between the prolidyl ring of the substrate and the hydrophobic proline-binding pocket.     

Structure of human pro-chymase: a model for the activating transition of granule-associated proteases

Human chymase is a protease involved in physiological processes ranging from inflammation to hypertension. As are all proteases of the trypsin fold, chymase is synthesized as an inactive "zymogen" with an N-terminal pro region that prevents the transition of the zymogen to an activated conformation. The 1.8 A structure of pro-chymase, reported here, is the first zymogen with a dipeptide pro region (glycine-glutamate) to be characterized at atomic resolution. Three segments of the pro-chymase structure differ from that of the activated enzyme: the N-terminus (Gly14-Gly19), the autolysis loop (Gly142-Thr154), and the 180s loop (Pro185A-Asp194). The four N-terminal residues (Gly14-Glu15-Ile16-Ile17) are disordered. The autolysis loop occupies a position up to 10 A closer to the active site than is seen in the activated enzyme, thereby forming a hydrogen bond with the catalytic residue Ser195 and occluding the S1' binding pocket. Nevertheless, the catalytic triad (Asp102-His57-Ser195) is arrayed in a geometry close to that seen in activated chymase (all atom rmsd of 0.52 A). The 180s loop of pro-chymase is, on average, 4 A removed from its conformation in the activated enzyme. This conformation disconnects the oxyanion hole (the amides of Gly193 and Ser195) from the active site and positions only approximately 35% of the S1-S3 binding pockets in the active conformation. The backbone of residue Asp194 is rotated 180 degrees when compared to its conformation in the activated enzyme, allowing a hydrogen bond between the main-chain amide of residue Trp141 and the carboxylate of Asp194. The side chains of residues Phe191 and Lys192 of pro-chymase fill the Ile16 binding pocket and the base of the S1 binding pocket, respectively. The zymogen positioning of both the 180s and autolysis loops are synergistic structural elements that appear to prevent premature proteolysis by chymase and, quite possibly, by other dipeptide zymogens.     

Sodium dodecyl sulfate stability of HLA-DR1 complexes correlates with burial of hydrophobic residues in pocket 1

Certain class II MHC-peptide complexes are resistant to SDS-induced dissociation. This property, which has been used as an in vivo as well as an in vitro peptide binding assay, is not understood at the molecular level. Here we have investigated the mechanistic basis of SDS stability of HLA-DR1 complexes by using a biosensor-based assay and SDS-PAGE with a combination of wild-type and mutant HLA-DR1 and variants of hemagglutinin peptide HA306-318. Experiments with wild-type DR1 along with previously published results establish that the SDS-stable complexes are formed only when the hydrophobic pocket 1 (P1) is occupied by a bulky aromatic (Trp, Phe, Tyr) or an aliphatic residue (Met, Ile, Val, Leu). To further explore whether the SDS sensitivity is primarily due to the exposed hydrophobic regions, we mutated residue beta Gly86 at the bottom of P1 to tyrosine, presumably reducing the depth of the pocket and the exposure of hydrophobic residues and increasing the contacts between subunits. In direct contrast to wild-type DR1, the peptide-free mutant DR1 exists as an alpha/beta heterodimer in SDS. Moreover, the presence of a smaller hydrophobic residue, such as alanine, as P1 anchor with no contribution from any other anchor is sufficient to enhance the SDS stability of the mutant complexes, demonstrating that the basis of SDS resistance may be localized to P1 interactions. The good correlation between SDS sensitivity and the exposure of hydrophobic residues provides a biochemical rationale for the use of this assay to investigate the maturation of class II molecules and the longevity of the complexes.     

Evidence for tryptophan in proximity to histidine and cysteine as essential to the active site of an alkaline protease

The presence, microenvironment, and proximity of an essential Trp with the essential His and Cys residues in the active site of an alkaline protease have been demonstrated for the first time using chemical modification, chemo-affinity labeling, and fluorescence spectroscopy. Kinetic analysis of the N-bromosuccinimide- (NBS) or p-hydroxymercuribenzoate- (PHMB) modified enzyme from Conidiobolus sp. revealed that a single Trp and Cys are essential for activity in addition to the Asp, His, and Ser residues of the catalytic triad. Full protection by casein against inactivation of the enzyme by NBS and quenching of Trp fluorescence upon binding of the enzyme with NBS, substrate (sAAPF-pNA), or inhibitor (SSI) confirmed participation of the Trp residue at the substrate/inhibitor binding site of the alkaline protease. Comparison of the K(sv) values for the charged quenchers CsCI (1.66) and KI (7.0) suggested that the overall Trp microenvironment in the protease is electropositive. The proximity of Trp with His was demonstrated by the sigmoidal shape of the pH-dependent fluorometric titration curve with a pK(F) of 6.1. The vicinity of Trp with Cys was indicated by resonance energy transfer between the intrinsic fluorophore (Trp) and 5-iodoacetamide-fluorescein labeled Cys (extrinsic fluorophore). Our results on the proximity of Trp with essential His and Cys thus confirm the presence of Trp in the active site of the alkaline protease.     

The crystal structure of polyhydroxybutyrate depolymerase from Penicillium funiculosum provides insights into the recognition and degradation of biopolyesters

Polyhydroxybutyrate is a microbial polyester that can be produced from renewable resources, and is degraded by the enzyme polyhydroxybutyrate depolymerase. The crystal structures of polyhydroxybutyrate depolymerase from Penicillium funiculosum and its S39 A mutant complexed with the methyl ester of a trimer substrate of (R)-3-hydroxybutyrate have been determined at resolutions of 1.71 A and 1.66 A, respectively. The enzyme is comprised of a single domain, which represents a circularly permuted variant of the alpha/beta hydrolase fold. The catalytic residues Ser39, Asp121, and His155 are located at topologically conserved positions. The main chain amide groups of Ser40 and Cys250 form an oxyanion hole. A crevice is formed on the surface of the enzyme, to which a single polymer chain can be bound by predominantly hydrophobic interactions with several hydrophobic residues. The structure of the S39A mutant-trimeric substrate complex reveals that Trp307 is responsible for the recognition of the ester group adjacent to the scissile group. It is also revealed that the substrate-binding site includes at least three, and possibly four, subsites for binding monomer units of polyester substrates. Thirteen hydrophobic residues, which are exposed to solvent, are aligned around the mouth of the crevice, forming a putative adsorption site for the polymer surface. These residues may contribute to the sufficient binding affinity of the enzyme for PHB granules without a distinct substrate-binding domain.     

Site-directed mutagenesis of the putative distal helix of peroxygenase cytochrome P450

CYP152A1 is an unusual, peroxygenase enzyme that catalyzes the beta- or alpha-hydroxylation of fatty acids by efficiently introducing an oxygen atom from H2O2 to the fatty acid. To clarify the mechanistic roles of amino acid residues in this enzyme, we have used site-directed mutagenesis of residues in the putative distal helix and measured the spectroscopic and enzymatic properties of the mutant proteins. Initially, we carried out Lys-scanning mutagenesis of amino acids in this region to determine residues of CYP152A1 that might have a mechanistic role. Among the Lys mutants, only P243K gave an absorption spectrum characteristic of a nitrogenous ligand-bound form of a ferric P450. Further investigation of the Pro243 site revealed that a P243H mutant also exhibited a nitrogen-bound form, but that the mutants P243A or P243S did not. On the hydroxylation of myristic acid by the Lys mutants, we observed a large decrease in activity for R242K and A246K. We therefore examined other mutants at amino acid positions 242 and 246. At position 246, an A246K mutant showed a roughly 19-fold lower affinity for myristic acid than the wild type. Replacing Ala246 with Ser decreased the catalytic activity, but did not affect affinity for the substrate. An A246V mutant showed slightly reduced activity and moderately reduced affinity. At position 242, an R242A showed about a fivefold lower affinity than the wild type for myristic acid. The Km values for H2O2 increased and Vmax values decreased in the order of wild type, R242K, and R242A when H2O2 was used; furthermore, Vmax/Km was greatly reduced in R242A compared with the wild type. If cumene hydroperoxide was used instead of H2O2, however, the Km values were not affected much by these substitutions. Together, our results suggest that in CYP152A1 the side chain of Pro243 is located close to the iron at the distal side of a heme molecule; the fatty acid substrate may be positioned near to Ala246 in the catalytic pocket, although Ala246 does not participate in hydrophobic interactions with the substrate; and that Arg242 is a critical residue for substrate binding and H2O2-specific catalysis.     

Crystal structure of earthworm fibrinolytic enzyme component a: revealing the structural determinants of its dual fibrinolytic activity

Earthworm fibrinolytic enzyme component A (EFEa) from Eisenia fetida is a strong fibrinolytic enzyme that not only directly degrades fibrin, but also activates plasminogen. Proteolytic assays further revealed that it cleaved behind various P1 residue types. The crystal structure of EFEa was determined using the MIR method and refined to 2.3A resolution. The enzyme, showing the overall polypeptide fold of chymotrypsin-like serine proteases, possesses essential S1 specificity determinants characteristic of elastase. However, the beta strand at the west rim of the S1 specificity pocket is significantly elongated by a unique four-residue insertion (Ser-Ser-Gly-Leu) after Val217, which not only provides additional substrate hydrogen binding sites for distal P residues, but also causes extension of the S1 pocket at the south rim. The S2 subsite of the enzyme was partially occluded by the bulky side-chain of residue Tyr99. Structure-based inhibitor modeling demonstrated that EFEa's S1 specificity pocket was preferable for elastase-specific small hydrophobic P1 residues, while its accommodation of long and/or bulky P1 residues was also feasible if enhanced binding of the substrate and induced fit of the S1 pocket were achieved. EFEa is thereby endowed with relatively broad substrate specificity, including the dual fibrinolysis. The presence of Tyr99 at the S2 subsite indicates a preference for P2-Gly, while an induced fit of Tyr99 was also suggested for accommodation of bigger P2 residues. This structure is the first reported for an earthworm fibrinolytic enzyme component and serine protease originating from annelid worms.     

慈菇蛋白酶抑制剂A和B中Trp残基周围构象与酶抑制专一性的关系

通过定点诱变结合荧光光谱学方法研究了慈菇蛋白酶抑制剂A和B(APIA和APIB)Trp残基周围构象与酶抑制专一性之间的关系。研究表明APIB中的两个Trp残基 (93和 12 2位 )所处环境的疏水性要比APIA中的强。Trp定点诱变研究表明 ,在APIB中 ,Trp12 2 周围环境的疏水性要比Trp93 强。用Ser和Leu分别替代 82位Leu和 87位Arg ,使APIB中色氨酸荧光特性变得与APIA的基本相同 ,同时还发现其酶的抑制专一性也变得趋近APIA的 ,暗示Trp周围的构象与酶抑制剂的抑制专一性有关。     

Substrate specificity of Bacillus subtilis intracellular serine protease. Hydrolysis of insulin beta-chain, native ribonuclease A and p-nitroanilide peptide substrates

Intracellular serine protease, termed ISP-103, was isolated from Bacillus subtilis, strain 103. The substrate specificity of the enzyme was compared to that of secretory subtilisins. Similar to subtilisins, ISP-103 cleaves a single peptide bond Ala20-Ser21 within the native pancreatic ribonuclease A, which results in the accumulation of trypsin-sensitive ribonuclease S, consisting of a non-covalently bound S-peptide (20 amino acid residues) and S-protein (104 amino acid residues). The enzyme hydrolyzes a single peptide bond Leu15-Tyr16 of the B-chain of oxidized bovine insulin, in contrast to the subtilisins cleaving four additional bonds. ISP prefers Leu rather than Phe in the P1 binding site of the rho-nitroanilide peptide substrates and shows a more strict dependence of the activity on the presence of the hydrophobic residues in the P2 and P3 sites. The data obtained indicate that the substrate specificity of ISP, being within the borders of subtilisin specificity, is nevertheless much more restricted.