Crude glycerol from biodiesel as a carbon source for production of a recombinant highly thermostable β-mannanase by <Emphasis Type="Italic">Pichia pastoris</Emphasis>

Objective

To explore an efficient use of crude glycerol for the production of a highly thermostable β-mannanase (ReTMan26) by Pichia pastoris X33.

Results

Cell growth was significantly inhibited by 4 and 6% (w/v) crude glycerol in 250 ml shake-flasks and in 5 l bioreactor batch cultures, respectively, but not affected by pure glycerol at the same concentrations. For further study, the impact of various impurities in crude glycerol on the cell growth of, and ReTMan26 production by, Pichia pastoris was investigated. Salts and methanol did not exert an inhibitory effect, but ≥ 0.2% and 0.3% (w/v) soap in shake-flask and bioreactor cultures, respectively, inhibited fermentation. Under identical conditions, the biomass and ReTMan26 activity produced by high-cell-density fermentation using 5% crude glycerol (glycerol at 80%, w/w) were slightly higher than those using 4% (w/v) pure glycerol.

Conclusions

Non-pretreated ≤ 5% (w/v) crude glycerol could be effectively utilized for industrial production of ReTMan26, and the total production costs using crude glycerol were ~ 4.2% lower than those using pure glycerol.

     

Enhanced truncated-t-PA (CT-b) expression in high-cell-density fed-batch cultures of <Emphasis Type="Italic">Pichia pastoris</Emphasis> through optimization of a mixed feeding strategy by response surface methodology

Recently, Pichia pastoris has been the focal point of interest as an expression system for production of many recombinant proteins. The study and optimization of feeding strategy are of major importance to achieve maximum volumetric productivity in fed-batch cultivations. Among different feeding strategies used in P. pastoris fed-batch cultures, those trying to maintain a constant specific growth rate have usually resulted in superior productivities. The objective of the present study was to investigate and optimize the co-feeding of glycerol and methanol to attain maximum expression of t-PA in P. pastoris fed-batch cultures with constant specific growth rate. The experiments were designed by response surface methodology, considering the specific feeding rates of methanol and glycerol as independent variables. In each experiment, glycerol and methanol were fed according to a predetermined equation to maintain a constant specific growth rate. It was found that with glycerol feeding for higher specific growth rates, the inhibitory properties of glycerol are more pronounced, while the best expression level was achieved when the ratio of µ _set glycerol to that of methanol was around 1.67. In all specific growth rates tested, almost a similar ratio of the specific glycerol feeding rate to that of methanol led to the maximum protein production and activity. The statistical model predicted the optimal operating conditions for µ _set glycerol and that of methanol to be 0.05 and 0.03 h^?1, respectively. Applying the optimum strategy, maximum of 52 g/L biomass, 300 mg/L t-PA and 340,000 IU/mL enzyme activity were obtained.     

Fast development of Pichia pastoris GS115 Mut+ cultures employing batch-to-batch control and hybrid semi-parametric modeling

In this paper, we implemented a model-based optimization platform for fast development of Pichia pastoris cultures employing batch-to-batch control and hybrid semi-parametric modeling. We illustrate the methodology with a P. pastoris GS115 strain expressing a single-chain antibody fragment (scFv) by determining the optimal time profiles of temperature, pH, glycerol feeding and methanol feeding that maximize the endpoint scFv titer. The first hybrid model was identified from data of six exploratory experiments carried out in a pilot 50-L reactor. This model was subsequently used to maximize the final scFv titer of the proceeding batch employing a dynamic optimization program. Thereupon, the optimized time profiles of control variables were implemented in the pilot reactor and the resulting new data set was used to re-identify the hybrid model and to re-optimize the next batch. The iterative batch-to-batch optimization was stopped after 4 complete optimized batches with the final scFv titer stabilizing at 49.5 mg/L. In relation to the baseline batch (executed according to the Pichia fermentation guidelines by Invitrogen) a more than fourfold increase in scFv titer was achieved. The biomass concentration at induction and the methanol feeding rate profile were found to be the most critical control degrees of freedom to maximize scFv titer.     

Enhancing Lipid Production from Crude Glycerol by Newly Isolated Oleaginous Yeasts: Strain Selection, Process Optimization, and Fed-Batch Strategy

High lipid-accumulating yeast Trichosporonoides spathulata was newly isolated using crude glycerol as a sole carbon source. After process optimization in a 5-L bioreactor equipped with pH control and aeration system, T. spathulata produced biomass of 11.3 g/L and lipid of 5.01 g/L with a lipid content of 44.3 % using 10 % (w/v) of crude glycerol supplemented only with 0.5 % (w/v) of ammonium sulfate. A one-stage fed-batch feeding with crude glycerol and ammonium sulfate enhanced biomass and lipid production up to 17.3 and 7.25 g/L, respectively, with a lipid content of 41.9 %, while a two-stage fed-batch feeding with only crude glycerol in the second stage led to a lower biomass of 13.8 g/L but a higher lipid production of 7.78 g/L and a higher lipid content of 56.4 %. The fatty acid composition of produced lipid that is similar to plant oil indicates the high potential use of T. spathulata lipid as biodiesel feedstocks.     

Enhanced heterologous protein production in Pichia pastoris under increased air pressure

Pichia pastoris is a widely used host for the production of heterologous proteins. In this case, high cell densities are needed and oxygen is a major limiting factor. The increased air pressure could be used to improve the oxygen solubility in the medium and to reach the high oxygen demand of methanol metabolism. In this study, two P. pastoris strains producing two different recombinant proteins, one intracellular (β‐galactosidase) and other extracellular (frutalin), were used to investigate the effect of increased air pressure on yeast growth in glycerol and heterologous protein production, using the methanol AOX1‐inducible system. Experiments were carried out in a stainless steel bioreactor under total air pressure of 1 bar and 5 bar. The use of an air pressure raise of up to 5 bar proved to be applicable for P. pastoris cultivation. Moreover, no effects on the kinetic growth parameters and methanol utilization (Mut) phenotype of strains were found, while an increase in recombinant β‐galactosidase‐specific activity (ninefold) and recombinant frutalin production was observed. Furthermore, the air pressure raise led to a reduction in the secreted protease specific activity. This work shows for the first time that the application of an air pressure of 5 bar may be used as a strategy to decrease protease secretion and improve recombinant protein production in P. pastoris. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1040–1047, 2014     

Study of the potential of the air lift bioreactor for xylitol production in fed-batch cultures by Debaryomyces hansenii immobilized in alginate beads

Cell immobilization has shown to be especially adequate for xylitol production. This work studies the suitability of the air lift bioreactor for xylitol production by Debaryomyces hansenii immobilized in Ca-alginate operating in fed-batch cultures to avoid substrate inhibition. The results showed that the air lift bioreactor is an adequate system since the minimum air flow required for fluidization was even lower than that leading to the microaerobic conditions that trigger xylitol accumulation by this yeast, also maintaining the integrity of the alginate beads and the viability of the immobilized cells until 3 months of reuses. Maximum productivities and yields of 0.43 g/l/h and 0.71 g/g were achieved with a xylose concentration of 60 g/l after each feeding. The xylose feeding rate, the air flow, and the biomass concentration at the beginning of the fed-batch operation have shown to be critical parameters for achieving high productivities and yields. Although a maximum xylitol production of 139 g/l was obtained, product inhibition was evidenced in batch experiments, which allowed estimating at 200 and 275 g/l the IC₅₀ for xylitol productivity and yield, respectively. The remarkable production of glycerol in the absence of glucose was noticeable, which could not only be attributed to the osmoregulatory function of this polyol in conditions of high osmotic pressure caused by high xylitol concentrations but also to the role of the glycerol synthesis pathway in the regeneration of NAD⁺ in conditions of suboptimal microaeration caused by insufficient aeration or high oxygen demand when high biomass concentrations were achieved.     

Efficient secretion of inulin fructotransferase in Pichia pastoris using the formaldehyde dehydrogenase 1 promoter

Inulin fructotransferase (IFTase) has received considerable attention due to its ability to catalyse inulin hydrolysis to difructose anhydride (DFA III), a natural low-calorie functional sweetener. In the present study, for the first time, we describe the expression of IFTase in Pichia pastoris under the control of the formaldehyde dehydrogenase 1 promoter (PFLD1). Using this system, we achieved efficient secretion with four substrate fed-batch strategies in a 3-L fermenter. The co-feeding induction strategy with methylamine hydrochloride and methanol achieved the maximum extracellular IFTase activity of 62.72 U mL^?1, which was 3.2-fold higher than that obtained with the wild-type strain. In addition to methanol, carbon sources such as glucose and glycerol could also be utilised by PFLD1-controlled P. pastoris for IFTase production using methylamine hydrochloride induction. However, we found that glycerol and glucose should be strictly controlled at low concentrations of 0.5–1.5 % (v/v) and 1–1.5 % (w/v), respectively. The use of glycerol and glucose demonstrated that P. pastoris was also attractive for IFTase production via methanol-free cultivation strategies. This study may provide the basis for the industrial use of this recombinant IFTase for the production of DFA III.     

Oxygen-limited control of methanol uptake for improved production of a single-chain antibody fragment with recombinant Pichia pastoris

The yeast Pichia pastoris is a suitable production system for recombinant proteins due to its strong methanol-inducible AOX1 promoter. A key parameter of the production process is the specific methanol uptake rate. To control the methanol uptake and simultaneously maintain a constant methanol concentration during the production phase, two strategies were developed to generate purposeful oxygen limitation and to feed-forward control the specific methanol uptake rate into the optimum range. First, the cell density at induction was adjusted by prolonged preinduction glycerol feeding. Alternatively, the airflow rate was restricted and increased in parallel with the biomass. While the product accumulation started 20 h earlier with the first approach, the specific production rate of a single-chain antibody fragment was three times higher in the latter case. After 70 h of production, both schemes yielded product concentrations in the gram-per-liter range. Moreover, they release the requirement for dosage of pure oxygen and thereby can facilitate the scale-up of the production process. The different production profiles indicate that the impact of specific methanol uptake rate on protein production by recombinant P. pastoris depends on the control mode.     

Cloning and expression of a functional core streptavidin in Pichia pastoris: Strategies to increase yield

Streptavidin is widely used as an analytical tool and affinity tag together with biotinylated surfaces or molecules. We report for the first time a simple strategy that yields high biomass of a Pichia pastoris strain containing a methanol induced core streptavidin (cStp) gene. Three factors were evaluated for biomass production: glycerol concentration, aeration, and feed flow rates in a bioreactor. Recycling of recombinant cells, either free or immobilized, was investigated during induction. Concentration of 2.0 M glycerol, feeding flow rate of 0.11 mL min^?1, and aeration by air injection dispersed with a porous stone combined with agitation at 500 rpm were the set of conditions resulting into maximum biomass yield (150 g L^?1). These parameters yielded 4.0 g L^?1 of cStp, after 96 h of induction. Recombinant biomass was recycled twice before being discarded, which can reduce production costs and simplify the process. Immobilized P. pastoris biomass produced 2.94 and 1.70 g L^?1 of cStp in the first and second induction cycle, respectively. Immobilization and recycling of recombinant P. pastoris biomass opens new possibilities as a potential strategy to improve volumetric productivity for heterologous protein expression. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Influence of methanol/sorbitol co-feeding rate on pAOX1 induction in a <Emphasis Type="Italic">Pichia pastoris</Emphasis> Mut+ strain in bioreactor with limited oxygen transfer rate

High Pichia pastoris biomass density could be obtained using high co-feeding rate of methanol and sorbitol in a fed-batch or continuous culture, while further higher feeding rate finally leads to oxygen limitation in bioreactor. In the literature, there is lack of report about AOX1 promoter regulation with regard to dissolved oxygen level (DO). Therefore, in this work, chemostat cultures were performed to investigate the cell growth, metabolism and regulation of the AOX1 promoter (pAOX1) regarding co-feeding rate of optimized methanol/sorbitol mixture (methanol fraction 0.60 C-mol/C-mol) using a P. pastoris Mut+/pAOX1-lacZ strain. The oxygen transfer rates (OTR) in bioreactor were kept in the range of typical values of large bioreactor, i.e., 4–8 g/(L h) if DO equals 30 % saturation or 5–10 g/(L h) if DO nears zero. For DO >0, an increase of the carbon fed led to an increase of pAOX1 induction. By contrast, when dissolved oxygen was completely depleted, methanol accumulated, causing a 30 % decrease of pAOX1 induction. However, this decrease is more likely to be lined to methanol accumulation than to low level of dissolved oxygen (<4 % DO). Methanol/sorbitol co-feeding allowed cells to adapt to oxygen transient limitations that often occur at industrial scale with reduced effect on pAOX1 induction. The optimal feeding rate tested here was 6.6 mmol C (DCW h)^?1 at an OTR of 8.28 g O₂(L h)^?1 with over fivefold pAOX1 induction (probably directly associated with target protein productivity) compared with previous work.     

Reduced methanol input induces increased protein output by <Emphasis Type="Italic">AOX1</Emphasis> promoter in a <Emphasis Type="Italic">trans</Emphasis>-acting elements engineered <Emphasis Type="Italic">Pichia pastoris</Emphasis>

High oxygen consumption and heat release caused by methanol catabolism usually bring difficulties to industrial scale-up and cost for protein expression driven by methanol-induced AOX1 promoter in Pichia pastoris. Here, reduced methanol feeding levels were investigated for expression of insulin precursor in a trans-acting elements engineered P. pastoris strain MF1-IP. Insulin precursor expression level reached 6.69 g/(L supernatant) at the methanol feeding rate of 6.67 mL/(h·L broth), which was 59% higher than that in the wild-type strain WT-IP at the methanol feeding rate of 12 mL/(h·L broth). Correspondingly, the insulin precursor expression level in fermentation broth and maximum specific insulin precursor production rate was 137 and 77% higher than the WT-IP, respectively. However, oxygen consumption and heat evolution were reduced, and the highest oxygen consumption rate and heat evolution rate of the MF1-IP were 18.0 and 37.7% lower than the WT-IP, respectively.     

Effects of temperature and glycerol and methanol‐feeding profiles on the production of recombinant galactose oxidase in Pichia pastoris

Optimization of protein production from methanol‐induced Pichia pastoris cultures is necessary to ensure high productivity rates and high yields of recombinant proteins. We investigated the effects of temperature and different linear or exponential methanol‐feeding rates on the production of recombinant Fusarium graminearum galactose oxidase (EC 1.1.3.9) in a P. pastoris Mut⁺ strain, under regulation of the AOX1 promoter. We found that low exponential methanol feeding led to 1.5‐fold higher volumetric productivity compared to high exponential feeding rates. The duration of glycerol feeding did not affect the subsequent product yield, but longer glycerol feeding led to higher initial biomass concentration, which would reduce the oxygen demand and generate less heat during induction. A linear and a low exponential feeding profile led to productivities in the same range, but the latter was characterized by intense fluctuations in the titers of galactose oxidase and total protein. An exponential feeding profile that has been adapted to the apparent biomass concentration results in more stable cultures, but the concentration of recombinant protein is in the same range as when constant methanol feeding is employed. © 2014 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 30:728–735, 2014     

Optimization of norovirus virus‐like particle production in Pichia pastoris using a real‐time near‐infrared bioprocess monitor

The production of norovirus virus‐like particles (NoV VLPs) displaying NY‐ESO‐1 cancer testis antigen in Pichia pastoris BG11 Mut⁺ has been enhanced through feed‐strategy optimization using a near‐infrared bioprocess monitor (RTBio^® Bioprocess Monitor, ASL Analytical, Inc.), capable of monitoring and controlling the concentrations of glycerol and methanol in real‐time. The production of NoV VLPs displaying NY‐ESO‐1 in P. pastoris has potential as a novel cancer vaccine platform. Optimization of the growth conditions resulted in an almost two‐fold increase in the expression levels in the fermentation supernatant of P. pastoris as compared to the starting conditions. We investigated the effect of methanol concentration, batch phase time, and batch to induction transition on NoV VLP‐NY‐ESO‐1 production. The optimized process included a glycerol transition phase during the first 2 h of induction and a methanol concentration set point of 4 g L^?1 during induction. Utilizing the bioprocess monitor to control the glycerol and methanol concentrations during induction resulted in a maximum NoV VP1‐NY‐ESO‐1 yield of 0.85 g L^?1. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:518–526, 2016     

Effect of dilution rate and methanol‐glycerol mixed feeding on heterologous Rhizopus oryzae lipase production with Pichia pastoris Mut+ phenotype in continuous culture

The induction using substrate mixtures is an operational strategy for improving the productivity of heterologous protein production with Pichia pastoris. Glycerol as a cosubstrate allows for growth at a higher specific growth rate, but also has been reported to be repressor of the expression from the AOX1 promoter. Thus, further insights about the effects of glycerol are required for designing the induction stage with mixed substrates. The production of Rhizopus oryzae lipase (ROL) was used as a model system to investigate the application of methanol‐glycerol feeding mixtures in fast metabolizing methanol phenotype. Cultures were performed in a simple chemostat system and the response surface methodology was used for the evaluation of both dilution rate and methanol‐glycerol feeding composition as experimental factors. Our results indicate that productivity and yield of ROL are strongly affected by dilution rate, with no interaction effect between the involved factors. Productivity showed the highest value around 0.04–0.06 h^?1, while ROL yield decreased along the whole dilution rate range evaluated (0.03–0.1 h^?1). Compared to production level achieved with methanol‐only feeding, the highest specific productivity was similar in mixed feeding (0.9 UA g‐biomass^?1 h^?1), but volumetric productivity was 70% higher. Kinetic analysis showed that these results are explained by the effects of dilution rate on specific methanol uptake rate, instead of a repressor effect caused by glycerol feeding. It is concluded that despite the effect of dilution rate on ROL yield, mixed feeding strategy is a proper process option to be applied to P. pastoris Mut⁺ phenotype for heterologous protein production. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:707–714, 2015     

Adaptation of acidogenic sludge to increasing glycerol concentrations for biohydrogen production

Hydrogen is a promising alternative as an energetic carrier and its production by dark fermentation from wastewater has been recently proposed, with special attention to crude glycerol as potential substrate. In this study, two different feeding strategies were evaluated for replacing the glucose substrate by glycerol substrate: a one-step strategy (glucose was replaced abruptly by glycerol) and a step-by-step strategy (progressive decrease of glucose concentration and increase of glycerol concentration from 0 to 5 g L^?1), in a continuous stirred tank reactor (12 h of hydraulic retention time (HRT), pH 5.5, 35 °C). While the one-step strategy led to biomass washout and unsuccessful H₂ production, the step-by-step strategy was efficient for biomass adaptation, reaching acceptable hydrogen yields (0.4?±?0.1 mol_H2?mol^?1 _{glycerol consumed}) around 33 % of the theoretical yield independently of the glycerol concentration. Microbial community structure was investigated by single-strand conformation polymorphism (SSCP) and denaturing gradient gel electrophoresis (DGGE) fingerprinting techniques, targeting either the total community (16S ribosomal RNA (rRNA) gene) or the functional Clostridium population involved in H₂ production (hydA gene), as well as by 454 pyrosequencing of the total community. Multivariate analysis of fingerprinting and pyrosequencing results revealed the influence of the feeding strategy on the bacterial community structure and suggested the progressive structural adaptation of the community to increasing glycerol concentrations, through the emergence and selection of specific species, highly correlated to environmental parameters. Particularly, this work highlighted an interesting shift of dominant community members (putatively responsible of hydrogen production in the continuous stirred tank reactor (CSTR)) according to the gradient of glycerol proportion in the feed, from the family Veillonellaceae to the genera Prevotella and Clostridium sp., putatively responsible of hydrogen production in the CSTR.     

Quantitative comparison of dynamic physiological feeding profiles for recombinant protein production with Pichia pastoris

Pichia pastoris is widely used for the production of recombinant proteins in industrial biotechnology. In general, industrial production processes describe fed-batch processes based on the specific growth rate. Recently, we introduced the specific substrate uptake rate (q _s) as a novel parameter to design fed-batch strategies for P. pastoris. We showed that a dynamic feeding strategy where the feed was adjusted in steps to the maximum specific substrate uptake rate was superior to more traditional strategies in terms of specific productivity. In the present study, we compare three different dynamic feeding strategies based on q _s for a recombinant P. pastoris strain with respect to cell physiology, methanol accumulation, productivity and product quality. By comparing (A) a feeding profile at constant high q _s, (B) a periodically adjusted feeding profile for a stepwise q _s ramp, and (C) a feeding profile at linear increasing q _s, we evaluated potential effects of the mode of feeding. Although a dynamic feeding strategy with stepwise increases of q _s to q _{s max} resulted in the highest specific productivity, a feeding profile where the feeding rate was stepwise increased to a constant high q _s value was superior in terms of the amount of active enzyme produced and in the amount of accumulated methanol. Furthermore, this feeding strategy could be run automatically by integrating an online calculator tool, thus rendering manual interventions by the operator unnecessary.     

Production of biomass, carotenoid and other lipid metabolites by several red yeast strains cultivated on waste glycerol from biofuel production – a comparative screening study

This study was focused on a comparison of growth and production properties of seven red yeast strains of the genus Rhodotorula, Sporobolomyces and Cystofilobasidium cultivated on glycerol substrate. Production of enriched yeast biomas and specific yeast metabolites (carotenoids, ergosterol, lipids) was evaluated on medium with glucose, pure technical glycerol and/or waste glycerol from biofuel production (40 g/L) and mixture of glycerol and glucose (1:3, 1:1, 3:1; C/N ratio 57 in all cultivations). All tested strains were able to utilize glycerol as the only carbon source. Production of biomass on waste glycerol was in most strains higher than in control as well as in medium with pure technical glycerol and reached 15.97–21.76 g/L. Production of carotenoids and ergosterol was better in glucose medium than in medium with glycerol only. Nevertheless, using glycerol medium with addition of glucose, higher yields of total carotenoids, beta-carotene and ergosterol were obtained than in control. The highest yields of total pigments were reached by Sporobolomyces roseus (3.60 mg/g cell dry weight (CDW); glycerol:glucose 1:3), Sporobolomyces salmonicolor (2.85 mg/g CDW; glycerol:glucose 1:3) and Rhodotorula glutinis (2.80 mg/g CDW; glycerol:glucose 3:1) In glucose medium, most tested strains except Cystofilobasidium capitatum (22.6 %) produced neutral lipids in the range of 11–15 %. Production of triacylglycerols in all strains was in 10–30 % better in glycerol medium, in which Rhodotorula aurantiaca and Sporobolomyces shibatanus also reached intracellular triacylglycerol concentrations up to 20 % of biomass. This study has shown that oleaginous red yeasts could have great potential for converting crude glycerol to valuable lipids and carotenoids in respect of efficient bioresources utilization.     

From crude glycerol to carotenoids by using a Rhodotorula glutinis mutant

In this work eighteen red yeasts were screened for carotenoids production on glycerol containing medium. Strain C2.5t1 of Rhodotorula glutinis, that showed the highest productivity, was UV mutagenized. Mutant 400A15, that exhibited a 280 % increase in β–carotene production in respect to the parental strain, was selected. A central composite design was applied to 400A15 to optimize carotenoids and biomass productions. Regression analyses of the quadratic polynomial equations obtained (R² = 0.87 and 0.94, for carotenoids and biomass, respectively) suggest that the models are reliable and significant (P < 0.0001) in the prediction of carotenoids and biomass productions on the basis of the concentrations of crude glycerol, yeast extract and peptone. Accordingly, total carotenoids production achieved (14.07 ± 1.45 mg l^?1) under optimized growth conditions was not statistically different from the maximal predicted (14.64 ± 1.57 mg l^?1) (P < 0.05), and it was about 100 % higher than that obtained under un-optimized conditions. Therefore mutant 400A15 may represent a biocatalyst of choice for the bioconversion of crude glycerol into value-added metabolites, and a tool for the valorization of this by-product of the biodiesel industry.     

Improved n-butanol production by a non-acetone producing Clostridium pasteurianum DSMZ 525 in mixed substrate fermentation

The kinetics of growth, acid and solvent production in batch culture of Clostridium pasteurianum DSMZ 525 were examined in mixed or mono-substrate fermentations. In pH-uncontrolled batch cultures, the addition of butyric acid or glucose significantly enhanced n-butanol production and the ratio of butanol/1,3-propanediol. In pH-controlled batch culture at pH?=?6, butyric acid addition had a negative effect on growth and did not lead to a higher n-butanol productivity. On the other hand, mixed substrate fermentation using glucose and glycerol enhanced the growth and acid production significantly. Glucose limitation in the mixed substrate fermentation led to the reduction or inhibition of the glycerol consumption by the growing bacteria. Therefore, for the optimal growth and n-butanol production by C. pasteurianum, a limitation of either substrate should be avoided. Under optimized batch conditions, n-butanol concentration and maximum productivity achieved were 21 g/L, and 0.96 g/L?×?h, respectively. In comparison, mixed substrate fermentation using biomass hydrolysate and glycerol gave a n-butanol concentration of 17 g/L with a maximum productivity of 1.1 g/L?×?h. In terms of productivity and final n-butanol concentration, the results demonstrated that C. pasteurianum DSMZ 525 is well suitable for n-butanol production from mixed substrates of biomass hydrolysate and glycerol and represents an alternative promising production strain.     

Improved glycerol to ethanol conversion by <Emphasis Type="Italic">E. coli</Emphasis> using a metagenomic fragment isolated from an anaerobic reactor

Crude glycerol obtained as a by-product of biodiesel production is a reliable feedstock with the potential to be converted into reduced chemicals with high yields. It has been previously shown that ethanol is the primary product of glycerol fermentation by Escherichia coli. However, few efforts were made to enhance this conversion by means of the expression of heterologous genes with the potential to improve glycerol transport or metabolism. In this study, a fosmid-based metagenomic library constructed from an anaerobic reactor purge sludge was screened for genetic elements that promote the use and fermentation of crude glycerol by E. coli. One clone was selected based on its improved growth rate on this feedstock. The corresponding fosmid, named G1, was fully sequenced (41 kbp long) and the gene responsible for the observed phenotype was pinpointed by in vitro insertion mutagenesis. Ethanol production from both pure and crude glycerol was evaluated using the parental G1 clone harboring the ethanologenic plasmid pLOI297 or the industrial strain LY180 complemented with G1. In mineral salts media containing 50 % (v/v) pure glycerol, ethanol concentrations increased two-fold on average when G1 was present in the cells reaching up to 20 g/L after 24 h fermentation. Similar fermentation experiments were done using crude instead of pure glycerol. With an initial OD₆₂₀ of 8.0, final ethanol concentrations after 24 h were much higher reaching 67 and 75 g/L with LY180 cells carrying the control fosmid or the G1 fosmid, respectively. This translates into a specific ethanol production rate of 0.39 g h^?1 OD^?1 L^?1.