A novel thermostable and organic solvent-tolerant lipase from <Emphasis Type="Italic">Xanthomonas oryzae</Emphasis> pv. <Emphasis Type="Italic">oryzae</Emphasis> YB103: screening,purification and characterization

Thermostable lipases offer major biotechnological advantages over mesophilic lipases. In this study, an intracellular thermostable and organic solvent-tolerant lipase-producing strain YB103 was isolated from soil samples and identified taxonomically as Xanthomonas oryzae pv. oryzae. The lipase from X. oryzae pv. oryzae YB103 (LipXO) was purified 101.1-fold to homogeneity with a specific activity of 373.9 U/mg. The purified lipase showed excellent thermostability, exhibiting 51.1 % of its residual activity after incubation for 3 days at 70 °C. The enzyme showed optimal activity at 70 °C, suggesting it is a thermostable lipase. LipXO retained 75.1–154.1 % of its original activity after incubation in 20 % (v/v) hydrophobic organic solvents at 70 °C for 24 h. Furthermore, LipXO displayed excellent stereoselectivity (e.e._p >99 %) toward (S)-1-phenethyl alcohol in n-hexane. These unique properties of LipXO make it promising as a biocatalyst for industrial processes.     

L(+) Lactate production from carbohydrates and lignocellulosic materials by Rhizopus oryzae UMIP 4.77

The lactate excretion by Rhizopus oryzae on various carbohydrates was studied in order to assess the potential of lactate production from raw materials. Six collection strains were tested on ten commercial carbohydrates i.e. glucose, xylose, glycerol, sucrose, lactose, cellobiose, inulin, starch, cellulose and fructose in flask or stirred-tank bioreactor. On glucose and xylose, lactate was produced by R. oryzae UMIP 4.77 at 73 and 8 gL^?1 respectively, indicating that lignocellulosic materials could be used as possible raw substrates. Two lignocellulosic substrates were therefore experimented in stirred-tank bioreactor with R. oryzae UMIP 4.77. The first one was hemicellulosic material, which is a concentrated C6 and C5 sugar solution resulting from washing of a steamed wheat straw sample. The second was cellulosic material, which is a partially-hydrolyzed unbleached pulp paper. In a simultaneous saccharification fermentation process, a final production of 24.1 gL^?1 of lactate was obtained from cellulosic material.     

Characterization of an extracellular lipase and its chaperone from Ralstonia eutropha H16

Lipase enzymes catalyze the reversible hydrolysis of triacylglycerol to fatty acids and glycerol at the lipid–water interface. The metabolically versatile Ralstonia eutropha strain H16 is capable of utilizing various molecules containing long carbon chains such as plant oil, organic acids, or Tween as its sole carbon source for growth. Global gene expression analysis revealed an upregulation of two putative lipase genes during growth on trioleate. Through analysis of growth and activity using strains with gene deletions and complementations, the extracellular lipase (encoded by the lipA gene, locus tag H16_A1322) and lipase-specific chaperone (encoded by the lipB gene, locus tag H16_A1323) produced by R. eutropha H16 was identified. Increase in gene dosage of lipA not only resulted in an increase of the extracellular lipase activity, but also reduced the lag phase during growth on palm oil. LipA is a non-specific lipase that can completely hydrolyze triacylglycerol into its corresponding free fatty acids and glycerol. Although LipA is active over a temperature range from 10 °C to 70 °C, it exhibited optimal activity at 50 °C. While R. eutropha H16 prefers a growth pH of 6.8, its extracellular lipase LipA is most active between pH 7 and 8. Cofactors are not required for lipase activity; however, EDTA and EGTA inhibited LipA activity by 83 %. Metal ions Mg²⁺, Ca²⁺, and Mn²⁺ were found to stimulate LipA activity and relieve chelator inhibition. Certain detergents are found to improve solubility of the lipid substrate or increase lipase-lipid aggregation, as a result SDS and Triton X-100 were able to increase lipase activity by 20 % to 500 %. R. eutropha extracellular LipA activity can be hyper-increased, making the overexpression strain a potential candidate for commercial lipase production or in fermentations using plant oils as the sole carbon source.     

Immobilization of Rhizopus oryzae in a modified polyvinyl alcohol gel for L(+)-lactic acid production

The production of L(+)-lactic acid (LA) by Rhizopus oryzae immobilized in polyvinyl alcohol (PVA) was investigated. To decrease diffusional resistance, we modified the PVA gel through the addition of sodium alginate and phosphate esterification. The production of L(+)-LA improved notably in the immobilized Rhizopus oryzae. Maximum L(+)-LA production (106.27 g/L), with a yield of 73.1 % and rate of 2.95 g/L·h, was obtained at a temperature of 38 °C, 6 % PVA, and 0.8 % sodium alginate. The immobilized R. oryzae was stable in 14 serial-batch cultures using non-growth medium. The immobilized beads also displayed good tolerance to low temperature and long-term storage at 4 °C with the preservation of biochemical properties.     

Evaluation of commercial soy sauce <Emphasis Type="Italic">koji</Emphasis> strains of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> for γ-aminobutyric acid (GABA) production

In this study, four selected commercial strains of Aspergillus oryzae were collected from soy sauce koji. These A. oryzae strains designated as NSK, NSZ, NSJ and NST shared similar morphological characteristics with the reference strain (A. oryzae FRR 1675) which confirmed them as A. oryzae species. They were further evaluated for their ability to produce γ-aminobutyric acid (GABA) by cultivating the spore suspension in a broth medium containing 0.4 % (w/v) of glutamic acid as a substrate for GABA production. The results showed that these strains were capable of producing GABA; however, the concentrations differed significantly (P < 0.05) among themselves. Based on the A. oryzae strains, highest GABA concentration was obtained from NSK (194 mg/L) followed by NSZ (63 mg/L), NSJ (51.53 mg/L) and NST (31.66 mg/L). Therefore, A. oryzae NSK was characterized and the sequence was found to be similar to A. oryzae and A. flavus with 99 % similarity. The evolutionary distance (K _nuc) between sequences of identical fungal species was calculated and a phylogenetic tree prepared from the K _nuc data showed that the isolate belonged to the A. oryzae species. This finding may allow the development of GABA-rich ingredients using A. oryzae NSK as a starter culture for soy sauce production.     

Immobilization of Rhizopus oryzae lipase on magnetic Fe3O4-chitosan beads and its potential in phenolic acids ester synthesis

A novel and simple method was developed for the preparation of magnetic Fe₃O₄ nanoparticles by chemical co-precipitation method and subsequent coating with 3-aminopropyltrimethoxysilane (APTMS) through silanization process. Magnetic Fe₃O₄-chitosan particles were prepared by the suspension cross-linking and covalent technique to be used in the application of magnetic carrier technology. The synthesized immobilization supports were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Using glutaraldehyde as the coupling agent, the lipase from R. oryzae was successfully immobilized onto the functionalized magnetic Fe₃O₄-chitosan beads. The results showed that 86.60% of R. oryzae lipase was bound on the synthesized immobilization support. This immobilized lipase was successfully used for the esterification of phenolic acid which resulted in esterification of phenolic acid in isooctane solvent reaction system for 8 consecutive cycles (totally 384 h), 72.6% of its initial activity was retained, indicating a high stability in pharmaceutical and industrial applications.     

Immobilization and Characterization of a Thermostable Lipase

Lipases have found a number of commercial applications. However, thermostable lipase immobilized on nanoparticle is not extensively characterized. In this study, a recombinant thermostable lipase (designated as TtL) from Thermus thermophilus WL was expressed in Escherichia coli and immobilized onto 3-APTES-modified Fe₃O₄@SiO₂ supermagnetic nanoparticles. Based on analyses with tricine–sodium dodecyl sulfate–polyacrylamide gel electrophoresis, X-ray diffraction, transmission electron microscopy, and vibrating sample magnetometer observation, the diameter of immobilized lipase nanoparticle was 18.4 (±2.4)?nm, and its saturation magnetization value was 52.3 emu/g. The immobilized lipase could be separated from the reaction medium rapidly and easily in a magnetic field. The biochemical characterizations revealed that, comparing with the free one, the immobilized lipase exhibited better resistance to temperature, pH, metal ions, enzyme inhibitors, and detergents. The K _m value for the immobilized TtL (2.56 mg/mL) was found to be lower than that of the free one (3.74 mg/mL), showing that the immobilization improved the affinity of lipase for its substrate. In addition, the immobilized TtL exhibited good reusability. It retained more than 79.5 % of its initial activity after reusing for 10 cycles. Therefore, our study presented that the possibility of the efficient reuse of the thermostable lipase immobilized on supermagnetic nanoparticles made it attractive from the viewpoint of practical application.     

Preparation of przewalskinic acid A from salvianolic acid B using a crude enzyme from an Aspergillus oryzae strain

Przewalskinic acid A is a rare, water-soluble, and highly biologically active ingredient found, thus far, only in the Salvia przewalskii Maxim herb; however, the content in S. przewalskii herb is very low. In order to obtain useful quantities of przewalskinic acid A, the biotransformatin of salvianolic acid B from Salvia miltiorrhiza root (danshen in Chinese) into przewalskinic acid A was studied using a crude enzyme produced from Aspergillus oryzae D30s strain. The crude enzyme from the A. oryzae strain hydrolyzed salvianolic acid B into przewalskinic acid A and danshensu. The preparation afforded 31.3 g przewalskinic acid A (91.0 % purity) and 13.1 g danshensu (95 % purity) from 75 g salvianolic acid B. The preparation of przewalskinic acid A was therefore very successful with a yield of over 86 %, but the yield of danshensu was only 33 %. The product przewalskinic acid A was identified using ultra-performance liquid chromatography–mass spectrometry (UPLC–MS) and NMR.     

Immobilisation of Candida rugosa lipase on polyhydroxybutyrate via a combination of adsorption and cross-linking agents to enhance acylglycerol production

In the present study, a combination of immobilisation processes was utilised to prepare robust biocatalysts. First, lipase from Candida rugosa was adsorbed on polyhydroxybutyrate (PHB) particles, followed by cross-linking with glutaraldehyde. Conditions for creating immobilised lipase involved the addition of 0.6 M glutaraldehyde and 45 U mL⁻¹ lipase while mixing at 150 rpm (4 °C) for 30 min. These conditions produced the highest yield of immobilised lipase (92 %) and the highest levels of activity (1.94 mg g⁻¹ support). At 40 °C and pH 9 the immobilised enzyme was optimally active with a K_m and V_maxat 1.2 mM and 2.5 × 10^-3 mmol min⁻¹, respectively. The use of immobilised lipase improved thermal stability, storage stability, and reusability.The immobilised lipase retained 80 % of its activity after incubation at 30–60 °C for 2 h and 4 °C for 30 d in 0.2 M sodium phosphate buffer (pH 7.0). Moreover, the immobilised enzyme retained 50 % of its activity after more than 14 cycles under optimal conditions. The immobilised lipase was used to produce monoacylglycerol MAG. The existence of a carbonyl group at 1,743 and 1,744 cm⁻¹ was identified using attenuated total reflectance (ATR)-Fourier transformed infrared spectroscopy. Results showed that 48 % MAG was produced.     

Immobilization and characterisation of a lipase from a new source, Bacillus sp. ITP-001

A new source of lipase from Bacillus sp. ITP-001 was immobilized by physical adsorption on the polymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. The support and immobilized lipase were characterised, compared to the lyophilised lipase, with regard to the specific surface area, adsorption–desorption isotherms, pore volume (Vp) and size (dp) by nitrogen adsorption, differential scanning calorimetry, thermogravimetric analysis, chemical composition analysis, Fourier transform infrared spectroscopy and biochemical properties. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0, whereas the optimum pH for the free enzyme was at pH 7.0; the optimum temperature of activity was 80 and 37 °C for the free and immobilized enzyme, respectively. The inactivation rate constant for the immobilized enzyme at 37 °C was 0.0038 h^?1 and the half-life was 182.41 h. The kinetic parameters obtained for the immobilized enzyme gave a Michaelis–Menten constant (K _m) of 49.10 mM and a maximum reaction velocity (V _max) of 205.03 U/g. Furthermore, the reuse of the lipase immobilized by adsorption allowed us to observe that it could be reused for 10 successive cycles, duration of each cycle (1 h), maintaining 33 % of the initial activity.     

Reduction of aflatoxins by Rhizopus oryzae and Trichoderma reesei

This study evaluated the ability of the microorganisms Rhizopus oryzae (CCT7560) and Trichoderma reesei (QM9414), producers of generally recognized as safe (GRAS) enzymes, to reduce the level of aflatoxins B₁, B₂, G₁, G₂, and M₁. The variables considered to the screening were the initial number of spores in the inoculum and the culture time. The culture was conducted in contaminated 4 % potato dextrose agar (PDA) medium, and the residual mycotoxins were determined every 24 h by HPLC-FL. The fungus R. oryzae has reduced aflatoxins B₁, B₂, and G₁ in the 96 h and aflatoxins M₁ and G₂ in the range of 120 h of culture by approximately 100 %. The fungus T. reesei has reduced aflatoxins B₁, B₂, and M₁ in the 96 h and aflatoxin G₁ in the range of 120 h of culture by approximately 100 %. The highest reduction occurred in the middle of R. oryzae culture.     

Eco-friendly methodology for efficient synthesis and scale-up of 2-ethylhexyl-p-methoxycinnamate using Rhizopus oryzae lipase and its biological evaluation

Lipase-mediated synthesis of phenolic acid esters is a green and economical alternative to current chemical methods. Octyl methoxycinnamate, an important UVB-absorbing compound, was synthesized by the esterification of p-methoxycinnamic acid with 2-ethyl hexanol using Rhizopus oryzae lipase. A molar ratio of 1:2 of p-methoxycinnamic acid and 2-ethyl hexanol was found to give an optimum yield using cyclo-octane (50 ml) as reaction solvent, at a temperature of 45 °C, and 750 U of lipase, resulting in a yield of 91.3 % in 96 h. This reaction was successfully scaled up to 400-ml reaction size where 88.6 %bioconversion was achieved. The synthesized compound was found to have superior antioxidant activity as compared to ascorbic acid. The synthesized compound also exhibited good antimicrobial activity against Escherichia coli, Klebsiella pneumonia, Salmonella typhi, Staphylococcus aures, Candida albicans (yeast), Aspergillus niger, Alternaria solani, and Fussarium oxysporum by well diffusion method in terms of zone of inhibitions (in mm).     

An improved method of lipase preparation incorporating both solvent treatment and immobilization onto matrix

A simple and effective preparation of lipases for use in organic solvents is hereby proposed. Lipases in aqueous solution were treated with isopropanol, immediately followed by immobilization onto a commercially available macroporous resin CRBO2 (crosslinked polystyrene with N-methylglucamine as a functional group). The dual modification of lipases by (1) isopropanol treatment and (2) immobilization improved the activity and stability of lipases more significantly than either of the two treatments alone. The degree of lipase activation was dependent on isopropanol–buffer (v/v) ratio and the source of lipase used. Among the lipases tested, Rhizopus oryzae lipase was more significantly activated. The maximum specific activity of R. oryzae lipase after dual modification was 94.9 mmol h⁻¹ g⁻¹, which was, respectively, 3.3-, 2.5- and 1.5-fold of untreated free, untreated immobilized and treated free lipases. The conformations of the treated and untreated free lipases were investigated by circular dichroism (CD) measurement. Changes in the far- and near-UV CD spectra of lipase indicate that lipase activation is accompanied by changes in secondary and tertiary structures of lipases. The increase in negative molar elipticity at 222 nm suggests that the α-helical content of lipase increase after pretreatment.     

Biodiesel production in a magnetically-stabilized, fluidized bed reactor with an immobilized lipase in magnetic chitosan microspheres

Biodiesel production by immobilized Rhizopus oryzae lipase in magnetic chitosan microspheres (MCMs) was carried out using soybean oil and methanol in a magnetically-stabilized, fluidized bed reactor (MSFBR). The maximum content of methyl ester in the reaction mixture reached 91.3 (w/v) at a fluid flow rate of 25 ml/min and a magnetic field intensity of 150 Oe. In addition, the MCMs-immobilized lipase in the reactor showed excellent reusability, retaining 82 % productivity even after six batches, which was much better than that in a conventional fluidized bed reactor. These results suggested that a MSFRB using MCMs-immobilized lipase is a promising method for biodiesel production.     

Acyl migration and kinetics study of 1(3)-positional specific lipase of Rhizopus oryzae-catalyzed methanolysis of triglyceride for biodiesel production

The lipase of Rhizopus oryzae (R. oryzae) was reported to have 1(3)-positional specificity, but in the process of R. oryzae-catalyzed biodiesel production, the yield of biodiesel (methyl esters) could reach over 80%. Although during 1(3)-positional specific lipase-catalyzed methanolysis of triglycerides, acyl migration was thought as one of the major reasons for higher methyl ester yield, there was no further study on the mechanism exploration regarding to acyl migration. In this paper, acyl migration and the related kinetics of R. oryzae-mediated methanolysis of triolein was studied systematically. Through our study, it was revealed that during the methanolysis process, acyl migration between 2-MG and 1-MG as well as acyl migration between 1,2-DG and 1,3-DG could take place independent of enzymatic catalysis. The kinetic study showed that the acyl migration was first-order reversible reaction. Based on this finding, a two-step mechanic model including acyl migration was developed for the enzyme-mediated methanolysis for biodiesel production and it was found that the reaction included consecutive hydrolysis and esterification. Further investigation on kinetics showed that R. oryzae lipase was not restrict selectivity of 1(3)-position acyl group, but a preference of 1(3)-position over 2-position, which also contributed to the higher yield of methyl esters.     

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: Characterization and application to enzymatic biodiesel production

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40–50 °C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50 °C and was maintained even after an incubation of 24-h at 60 °C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50 °C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production.     

Plant growth-promoting rhizobacteria affect the growth and nutrient uptake of Fraxinus americana container seedlings

Plant growth-promoting rhizobacteria (PGPR) are important catalysts that regulate the functional properties of agricultural systems. However, there is little information on the effect of PGPR inoculation on the growth and nutrient accumulation of forest container seedlings. This study determined the effects of a growth medium inoculated with PGPR on the nutrient uptake, nutrient accumulation, and growth of Fraxinus americana container seedlings. PGPR inoculation with fertilizer increased the dry matter accumulation of the F. americana aerial parts with delayed seedling emergence time. Under fertilized conditions, the accumulation time of phosphorous (P) and potassium (K) in the F. americana aerial parts was 13 days longer due to PGPR inoculation. PGPR increased the maximum daily P and K accumulations in fertilized seedlings by 9.31 and 10.44 %, respectively, but had little impact on unfertilized ones. Regardless of fertilizer application, the root exudates, namely sugars, amino acids, and organic acids significantly increased because of PGPR inoculation. PGPR inoculation with fertilizer increased the root, shoot, and leaf yields by 19.65, 22.94, and 19.44 %, respectively, as well as the P and K contents by 8.33 and 10.60 %, respectively. Consequently, the N, P, and K uptakes increased by 19.85, 31.97, and 33.95 %, respectively. Hence, PGPR inoculation with fertilizer can be used as a bioenhancer for plant growth and nutrient uptake in forest container seedling nurseries.     

Expression and Biochemical Characterization of a Thermophilic Organic Solvent-Tolerant Lipase from Bacillus sp. DR90

The objective of the present study was the isolation, molecular cloning and biochemical characterization of a thermophilic organic solvent-resistant lipase from Bacillus sp. DR90. The lipase gene was expressed in Escherichia coli BL21(DE3) using pET-28a(+) vector. The purification of recombinant lipase was conducted by nickel affinity chromatography and its biochemical properties were determined. The lipase sequence with an ORF of 639 bp contains the conserved pentapeptide Ala-His-Ser-Met-Gly. His-tagged recombinant lipase had a specific activity of 1,126 U/mg with a molecular mass of 26.8 kDa. The cloned lipase was optimally active at pH 8.0 and 75 °C representing high stability in broad ranges of temperature and pH. High performance liquid chromatography was used to determine the major compounds released during the lipase-catalyzed reaction of p-nitrophenyl derivatives as well as the substrate specificity. The purified lipase showed high compatibility towards various organic solvents, surfactants and commercial solid/liquid detergents; therefore the recombinant DR90 lipase could be considered as a probable candidate for future applications, predominantly in detergent processing industries.     

Kinetics of lipase recovery from the aqueous phase of biodiesel production by macroporous resin adsorption and reuse of the adsorbed lipase for biodiesel preparation

A commercial macroporous resin (D3520) was screened for lipase recovery by adsorption from the aqueous phase of biodiesel production. The influences of several factors on the adsorption kinetics were investigated. It was found that the kinetic behavior of lipase adsorption by macroporous resin could be well described by pseudo-first-order model. Temperature had no significant effects on lipase adsorption, while resin-to-protein ratio (R) significantly affected both rate constant (k₁) and equilibrium adsorption capacity (Q_e). No lipase was adsorbed when mixing (shaking) was not performed; however, protein recovery reached 98% after the adsorption was conducted at 200 rpm for 5 h in a shaker. The presence of methanol and glycerol showed significant negative influence on lipase adsorption kinetics. Particularly, increasing glycerol concentration could dramatically decrease k₁ but not impact Q_e. Biodiesel was found to dramatically decrease Q_e even present at a concentration as low as 0.02%, while k₁ was found to increase with biodiesel concentration. The adsorbed lipase showed a relatively stable catalytic activity in tert-butanol system, but poor stability in solvent-free system when used for biodiesel preparation. Oil and biodiesel were also found to adsorb onto resin during transesterification in solvent-free system. Therefore, the resin had to be washed by anhydrous methanol before re-used for lipase recovery.     

Porcine bone grafts defatted by lipase: efficacy of defatting and assessment of cytocompatibility

Defatting is an important procedure for the preparation of bone grafts because lipids in bone grafts strongly influence the osteointegration. Lipases have been widely used in different fields. However, study on the application to defatting process for bone grafts preparation has never been found so far. In this study, bone samples were treated respectively by lipase, NaHCO₃/Na₂CO₃, acetone and deionized water. The lipids content of processed bone grafts was calculated in Soxhlet extractor method. Surface morphology of the bone grafts was observed under scanning electron microscope (SEM). DNA content of processed bone grafts was measured. Cytocompatibility was evaluated by co-culturing mouse preosteoblasts (MC3T3-E1) on defatted bone cubes. Proliferation rates of MC3T3-E1 were examined by cell counting kit-8 (CCK-8) assay. No statistically significant difference was found between lipids amount of bone processed by lipase (0.46 ± 0.16 %) and acetone (1.11 ± 0.13 %) (P > 0.05). Both of them were significantly lower than that in groups processed by Na₂CO₃/NaHCO₃ (3.46 ± 0.69 %) and deionized water (8.88 ± 0.18 %) (P = 0.000). Only cell debris were discovered over the surface of bone processed by lipase or acetone, while lipid droplets were observed on bone processed by Na₂CO₃/NaHCO₃ or water by SEM. The difference of DNA concentration between the bone processed by lipase (3.16 ± 0.81 ng/μl) and acetone (4.14 ± 0.40 ng/μl) is not statistically significant (P > 0.05). Both of them are significantly lower than that groups processed by Na₂CO₃/NaHCO₃ (5.22 ± 0.38 ng/μl) and water (7.88 ± 0.55 ng/μl) (P < 0.05). MC3T3-E1 cells maintained their characteristic spreading on the trabecular surfaces of bone processed by lipase. There were no statistically significant differences among absorbance of lipase, acetone groups in CCK-8 assay. The application of lipase to bone tissue defatting appears to be a very promising technique for bone grafts preparation.