Anaerobic Degradation of Benzene, Toluene, Ethylbenzene, and o-Xylene in Sediment-Free Iron-Reducing Enrichment Cultures

Monoaromatic hydrocarbons such as benzene, toluene, ethylbenzene, and xylene (BTEX) are widespread contaminants in groundwater. We examined the anaerobic degradation of BTEX compounds with amorphous ferric oxide as electron acceptor. Successful enrichment cultures were obtained for all BTEX substrates both in the presence and absence of AQDS (9,10-anthraquinone-2,6-disulfonic acid). The electron balances showed a complete anaerobic oxidation of the aromatic compounds to CO₂. This is the first report on the anaerobic degradation of o-xylene and ethylbenzene in sediment-free iron-reducing enrichment cultures.     

Benzene Degradation at a Site Amended with Nitrate or Chlorate

Aromatic hydrocarbons are widespread in nature and often contribute to the pollution of soils, sediments, and groundwater. The contamination of soil with mobile aromatic compounds, generally termed BTEX (benzene, toluene, ethylbenzene, xylene) is observed at many industrial sites, especially those associated with the petrochemical industry. In situ bioremediation of sites that are contaminated with BTEX can be applied both aerobically and anaerobically. The use of anaerobic in situ bioremediation is advantageous because supply of oxygen is not needed. Nevertheless, anaerobic in situ bioremediation is less commonly used for BTEX contaminated sites. This paper describes push-pull experiments in order to stimulate the degradation of benzene by the addition of nitrate or chlorate. Deuterated benzene was subjected with nitrate-amended groundwater to the aquifer, and the mineralization was traced by the enrichment of deuterium in the groundwater. Nitrate can be used as electron acceptor, and the addition of nitrate at a site in The Netherlands resulted in partial degradation of benzene. This was demonstrated by comparing various push-pull experiments, benzene concentration measurements, stable isotope analyses of benzene and water, and modeling. Chlorate can be used for the in situ production of oxygen, followed by degradation of benzene with oxygen as electron acceptor. The addition of chlorate at the site resulted in the complete removal of benzene demonstrating a complete degradation within 4 weeks. A pull phase was not needed during this run.     

Potential for anaerobic bioremediation of BTEX in petroleum-contaminated aquifers

Laboratory incubations of aquifer material or enrichments derived from aquifer material as well as geochemical data have suggested that, under the appropriate conditions, BTEX components of petroleum (benzene, toluene, ethylbenzene and xylene) can be degraded in the absence of molecular oxygen with either Fe(III), sulfate, or nitrate serving as the electron acceptor. BTEX degradation under methanogenic conditions has also been observed. However, especially for benzene, the BTEX contaminant of greatest concern, anaerobic degradation is often difficult to establish and maintain in laboratory incubations. Although studies to date have suggested that naturally occurring anaerobic BTEX degradation has the potential to remove significant quantities of BTEX from petroleum-contaminated aquifers, and mechanisms for stimulating anaerobic BTEX degradation in laboratory incubations have been developed, further study of the organisms involved in this metabolism and the factors controlling their distribution and activity are required before it will be possible to design rational strategies for accelerating anaerobic BTEX degradation in contaminated aquifers. Received 21 November 1995/ Accepted in revised form 20 February 1996     

Temperature effects and substrate interactions during the aerobic biotransformation of BTEX mixtures by toluene-enriched consortia and Rhodococcus rhodochrous

A microbial consortium derived from a gasoline-contaminated aquifer was enriched on toluene (T) in a chemostat at 20 degrees C and was found to degrade benzene (B), ethylbenzene (E), and xylenes (X). Studies conducted to determine the optimal temperature for microbial activity revealed that cell growth and toluene degradation were maximized at 35 degrees C. A consortium enriched at 35 degrees C exhibited increased degradation rates of benzene, toluene, ethylbenzene, and xylenes in single-substrate experiments; in BTEX mixtures, enhanced benzene, toluene, and xylene degradation rates were observed, but ethylbenzene degradation rates decreased. Substrate degradation patterns over a range of BTEX concentrations (0 to 80 mg/L) for individual aromatics were found to differ significantly from patterns for aromatics in mixtures. Individually, toluene was degraded fastest, followed by benzene, ethylbenzene, and the xylenes. In BTEX mixtures, degradation followed the order of ethylbenzene, toluene, and benzene, with the xylenes degraded last. A pure culture isolated from the 35 degrees C-enriched consortium was identified as Rhodococcus rhodochrous. This culture was shown to degrade each of the BTEX compounds, individually and in mixtures, following the same degradation patterns as the mixed cultures. Additionally, R. rhodochrous was shown to utilize benzene, toluene, and ethylbenzene as primary carbon and energy sources. Studies conducted with the 35 degrees C-enriched consortium and R. rhodochrous to evaluate potential substrate interactions caused by the concurrent presence of multiple BTEX compounds revealed a range of substrate interaction patterns including no interaction, stimulation, competitive inhibition, noncompetitive inhibition, and cometabolism. In the case of the consortium, benzene and toluene degradation rates were slightly enhanced by the presence of o-xylene, whereas the presence of toluene, benzene, or ethylbenzene had a negative effect on xylene degradation rates. Ethylbenzene was shown to be the most potent inhibitor of BTEX degradation by both the mixed and pure cultures. Attempted quantification of these inhibition effects in the case of the consortium suggested a mixture of competitive and noncompetitive inhibition kinetics. Benzene, toluene, and the xylenes had a negligible effect on the biodegradation of ethylbenzene by both cultures. Cometabolism of o-, m-, and p-xylene was shown to be a positive substrate interaction.     

Degradation of benzene, toluene, ethylbenzene, and xylenes (BTEX) by the lignin-degrading basidiomycete Phanerochaete chrysosporium.

Degradation of the BTEX (benzene, toluene, ethylbenzene, and o-, m-, and p-xylenes) group of organopollutants by the white-rot fungus Phanerochaete chrysosporium was studied. Our results show that the organism efficiently degrades all the BTEX components when these compounds are added either individually or as a composite mixture. Degradation was favored under nonligninolytic culture conditions in malt extract medium, in which extracellular lignin peroxidases (LIPs) and manganese-dependent peroxidases (MNPs) are not produced. The noninvolvement of LIPs and MNPs in BTEX degradation was also evident from in vitro studies using concentrated extracellular fluid containing LIPs and MNPs and from a comparison of the extents of BTEX degradation by the wild type and the per mutant, which lacks LIPs and MNPs. A substantially greater extent of degradation of all the BTEX compounds was observed in static than in shaken liquid cultures. Furthermore, the level of degradation was relatively higher at 25 than at 37 degrees C, but pH variations between 4.5 and 7.0 had little effect on the extent of degradation. Studies with uniformly ring-labeled [14C]benzene and [14C]toluene showed substantial mineralization of these compounds to 14CO2.     

Lab-Scale Biodegradation Study of BTEX under the Unsaturated Condition and Its Effect on Soil Matric Potential

Benzene, toluene, ethylbenzene, and xylene are collectively known as BTEX which contributes to volatile environmental contaminants. This present study investigates the microbial degradation of BTEX in batch and continuous soil column experiments and its effects on soil matric potential. Batch degradation experiments were performed with different initial concentrations of BTEX using the BTEX tolerant culture isolated from petroleum-contaminated soil. In batch study, the degradation pattern for single substrate showed that xylene was degraded much faster than other compounds followed by ethylbenzene, toluene, and benzene with the highest μ_max = 0.140 h^?1 during initial substrate concentration of 100 mg L^?1. Continuous degradation experiments were performed in a soil column with an inlet concentration of BTEX of about 2000 mg L^?1 under unsaturated flow in anaerobic condition. BTEX degradation pattern was studied with time and the matric potential of the soil at different parts along the length of the column were determined at the end of the experiment. In continuous degradation study, BTEX compounds were degraded with different degradation pattern and an increase in soil matric potential was observed with an increase in depth from top to bottom in the column with applied suction head. It was found that column biodegradation contributed to 69.5% of BTEX reduction and the bacterial growth increased the soil matric potential of about 34% on an average along the column height. Therefore, this study proves that it is significant to consider soil matric potential in modeling fate and transport of BTEX in unsaturated soils.     

Degradation of BTEX by anaerobic bacteria: physiology and application

Pollution of the environment with aromatic hydrocarbons, such as benzene, toluene, ethylbenzene and xylene (so-called BTEX) is often observed. The cleanup of these toxic compounds has gained much attention in the last decades. In situ bioremediation of aromatic hydrocarbons contaminated soils and groundwater by naturally occurring microorganisms or microorganisms that are introduced is possible. Anaerobic bioremediation is an attractive technology as these compounds are often present in the anoxic zones of the environment. The bottleneck in the application of anaerobic techniques is the lack of knowledge about the anaerobic biodegradation of benzene and the bacteria involved in anaerobic benzene degradation. Here, we review the existing knowledge on the degradation of benzene and other aromatic hydrocarbons by anaerobic bacteria, in particular the physiology and application, including results on the (per)chlorate stimulated degradation of these compounds, which is an interesting new alternative option for bioremediation.     

Effect of carbon source during enrichment on BTEX degradation by anaerobic mixed bacterial cultures

A comprehensive study on the effects of different carbon sources during the bacterial enrichment on the removal performances of benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds when present as a mixture was conducted. Batch BTEX removal kinetic experiments were performed using cultures enriched with individual BTEX compounds or BTEX as a mixture or benzoate alone or benzoate–BTEX mixture. An integrated Monod-type non-linear model was developed and a ratio between maximum growth rate (μ _max) and half saturation constant (K_s) was used to fit the non-linear model. A higher μ _max/K_s indicates a higher affinity to degrade BTEX compounds. Complete removal of BTEX mixture was observed by all the enriched cultures; however, the removal rates for individual compounds varied. Degradation rate and the type of removal kinetics were found to be dependent on the type of carbon source during the enrichment. Cultures enriched on toluene and those enriched on BTEX mixture were found to have the greatest μ _max/K_s and cultures enriched on benzoate had the least μ _max/K_s. Removal performances of the cultures enriched on all different carbon sources, including the ones enriched on benzoate or benzoate–BTEX mixture were also improved during a second exposure to BTEX. A molecular analysis showed that after each exposure to the BTEX mixture, the cultures enriched on benzoate and those enriched on benzoate–BTEX mixture had increased similarities to the culture enriched on BTEX mixture.     

Anaerobic degradation of ethylbenzene by a new type of marine sulfate-reducing bacterium

Anaerobic degradation of the aromatic hydrocarbon ethylbenzene was studied with sulfate as the electron acceptor. Enrichment cultures prepared with marine sediment samples from different locations showed ethylbenzene-dependent reduction of sulfate to sulfide and always contained a characteristic cell type that formed gas vesicles towards the end of growth. A pure culture of this cell type, strain EbS7, was isolated from sediment from Guaymas Basin (Gulf of California). Complete mineralization of ethylbenzene coupled to sulfate reduction was demonstrated in growth experiments with strain EbS7. Sequence analysis of the 16S rRNA gene revealed a close relationship between strain EbS7 and the previously described marine sulfate-reducing strains NaphS2 and mXyS1 (similarity values, 97.6 and 96.2%, respectively), which grow anaerobically with naphthalene and m-xylene, respectively. However, strain EbS7 did not oxidize naphthalene, m-xylene, or toluene. Other compounds utilized by strain EbS7 were phenylacetate, 3-phenylpropionate, formate, n-hexanoate, lactate, and pyruvate. 1-Phenylethanol and acetophenone, the characteristic intermediates in anaerobic ethylbenzene degradation by denitrifying bacteria, neither served as growth substrates nor were detectable as metabolites by gas chromatography-mass spectrometry in ethylbenzene-grown cultures of strain EbS7. Rather, (1-phenylethyl)succinate and 4-phenylpentanoate were detected as specific metabolites in such cultures. Formation of these intermediates can be explained by a reaction sequence involving addition of the benzyl carbon atom of ethylbenzene to fumarate, carbon skeleton rearrangement of the succinate moiety (as a thioester), and loss of one carboxyl group. Such reactions are analogous to those suggested for anaerobic n-alkane degradation and thus differ from the initial reactions in anaerobic ethylbenzene degradation by denitrifying bacteria which employ dehydrogenations.     

Anaerobic biodegradation of BTEX and gasoline in various aquatic sediments

We examined the extent of biodegradation of benzene, toluene, ethylbenzene and the three isomers of xylene (BTEX) as a mixture and from gasoline in four different sediments: the New York/New Jersey Harbor estuary (polluted); Tuckerton, N.J. (pristine); Onondaga Lake, N.Y. (polluted) and Blue Mtn. Lake, N.Y. (pristine). Enrichment cultures were established with each sediment using denitrifying, sulfidogenic, methanogenic and iron reducing media, as well as site water. BTEX loss, as measured by GC-FID, was extensive in the sediments which had a long history of pollution, with all compounds being utilized within 21–91 days in the most active cultures, and was very slight or non-existent in the pristine sediments. Also, the pattern of loss was different under the various reducing conditions within each sediment and between sediments. For example benzene loss was only observed in sulfidogenic cultures from the NY/NJ Harbor sediments while toluene was degraded under all redox conditions. The loss of BTEX was correlated to the reduction of the various electron acceptors. In cultures amended with gasoline the degradation was much slower and incomplete. These results show that the fate of the different BTEX components in anoxic sediments is dependent on the prevailing redox conditions as well as on the characteristics and pollution history of the sediment.     

Phylogenetic and Functional Diversity Within Toluene-Degrading,Sulphate-Reducing Consortia Enriched from a Contaminated Aquifer

Three toluene-degrading microbial consortia were enriched under sulphate-reducing conditions from different zones of a benzene, toluene, ethylbenzene and xylenes (BTEX) plume of two connected contaminated aquifers. Two cultures were obtained from a weakly contaminated zone of the lower aquifer, while one culture originated from the highly contaminated upper aquifer. We hypothesised that the different habitat characteristics are reflected by distinct degrader populations. Degradation of toluene with concomitant production of sulphide was demonstrated in laboratory microcosms and the enrichment cultures were phylogenetically characterised. The benzylsuccinate synthase alpha-subunit (bssA) marker gene, encoding the enzyme initiating anaerobic toluene degradation, was targeted to characterise the catabolic diversity within the enrichment cultures. It was shown that the hydrogeochemical parameters in the different zones of the plume determined the microbial composition of the enrichment cultures. Both enrichment cultures from the weakly contaminated zone were of a very similar composition, dominated by Deltaproteobacteria with the Desulfobulbaceae (a Desulfopila-related phylotype) as key players. Two different bssA sequence types were found, which were both affiliated to genes from sulphate-reducing Deltaproteobacteria. In contrast, the enrichment culture from the highly contaminated zone was dominated by Clostridia with a Desulfosporosinus-related phylotype as presumed key player. A distinct bssA sequence type with high similarity to other recently detected sequences from clostridial toluene degraders was dominant in this culture. This work contributes to our understanding of the niche partitioning between degrader populations in distinct compartments of BTEX-contaminated aquifers.     

Aerobic Biotransformation of Gasoline Aromatics in MultiComponent Mixtures

The primary objective of this study was to evaluate the impact of substrate interactions on the biotransformation rates and mineralization potentials of gasoline monoaromatics and methyl tert-butyl ether (MTBE), compounds that commonly co-exist in groundwater contaminant plumes. A mixed culture was derived from gasoline-contaminated aquifer material using toluene as the enrichment substrate. Two pure cultures, Rhodococcus sp. RR1 and RR2, were isolated from the mixed culture. The three toluene-grown cultures were shown to biotransform all of the six BTEX compounds (benzene, toluene, ethylbenzene, o-xylene, m-xylene, and p-xylene), both individually and in mixtures, over a broad range of concentrations. The mixed culture was shown to degrade all of the BTEX compounds to ¹⁴CO₂, while the two isolates mineralized BTE(m-/p-)X, but biotransformed o-xylene without production of carbon dioxide. Studies to evaluate substrate interactions caused by the concurrent presence of multiple BTEX compounds during their biodegradation revealed a number of patterns,including competitive inhibition and cometabolism. Ethylbenzene was shown to significantly inhibit BTX degradation in mixtures. MTBE was not biodegraded by any of the three toluene-grown cultures over a range of MTBE concentrations. Furthermore, the presence of MTBE at concentrations of 2 to 100?mg/L had no effect on BTEX biotransformation rates.     

Anaerobic Degradation of Ethylbenzene by a New Type of Marine Sulfate-Reducing Bacterium

Anaerobic degradation of the aromatic hydrocarbon ethylbenzene was studied with sulfate as the electron acceptor. Enrichment cultures prepared with marine sediment samples from different locations showed ethylbenzene-dependent reduction of sulfate to sulfide and always contained a characteristic cell type that formed gas vesicles towards the end of growth. A pure culture of this cell type, strain EbS7, was isolated from sediment from Guaymas Basin (Gulf of California). Complete mineralization of ethylbenzene coupled to sulfate reduction was demonstrated in growth experiments with strain EbS7. Sequence analysis of the 16S rRNA gene revealed a close relationship between strain EbS7 and the previously described marine sulfate-reducing strains NaphS2 and mXyS1 (similarity values, 97.6 and 96.2%, respectively), which grow anaerobically with naphthalene and m-xylene, respectively. However, strain EbS7 did not oxidize naphthalene, m-xylene, or toluene. Other compounds utilized by strain EbS7 were phenylacetate, 3-phenylpropionate, formate, n-hexanoate, lactate, and pyruvate. 1-Phenylethanol and acetophenone, the characteristic intermediates in anaerobic ethylbenzene degradation by denitrifying bacteria, neither served as growth substrates nor were detectable as metabolites by gas chromatography-mass spectrometry in ethylbenzene-grown cultures of strain EbS7. Rather, (1-phenylethyl)succinate and 4-phenylpentanoate were detected as specific metabolites in such cultures. Formation of these intermediates can be explained by a reaction sequence involving addition of the benzyl carbon atom of ethylbenzene to fumarate, carbon skeleton rearrangement of the succinate moiety (as a thioester), and loss of one carboxyl group. Such reactions are analogous to those suggested for anaerobic n-alkane degradation and thus differ from the initial reactions in anaerobic ethylbenzene degradation by denitrifying bacteria which employ dehydrogenations.     

Depth-Resolved Quantification of Anaerobic Toluene Degraders and Aquifer Microbial Community Patterns in Distinct Redox Zones of a Tar Oil Contaminant Plume

Microbial degradation is the only sustainable component of natural attenuation in contaminated groundwater environments, yet its controls, especially in anaerobic aquifers, are still poorly understood. Hence, putative spatial correlations between specific populations of key microbial players and the occurrence of respective degradation processes remain to be unraveled. We therefore characterized microbial community distribution across a high-resolution depth profile of a tar oil-impacted aquifer where benzene, toluene, ethylbenzene, and xylene (BTEX) degradation depends mainly on sulfate reduction. We conducted depth-resolved terminal restriction fragment length polymorphism fingerprinting and quantitative PCR of bacterial 16S rRNA and benzylsuccinate synthase genes (bssA) to quantify the distribution of total microbiota and specific anaerobic toluene degraders. We show that a highly specialized degrader community of microbes related to known deltaproteobacterial iron and sulfate reducers (Geobacter and Desulfocapsa spp.), as well as clostridial fermenters (Sedimentibacter spp.), resides within the biogeochemical gradient zone underneath the highly contaminated plume core. This zone, where BTEX compounds and sulfate—an important electron acceptor—meet, also harbors a surprisingly high abundance of the yet-unidentified anaerobic toluene degraders carrying the previously detected F1-cluster bssA genes (C. Winderl, S. Schaefer, and T. Lueders, Environ. Microbiol. 9:1035-1046, 2007). Our data suggest that this biogeochemical gradient zone is a hot spot of anaerobic toluene degradation. These findings show that the distribution of specific aquifer microbiota and degradation processes in contaminated aquifers are tightly coupled, which may be of value for the assessment and prediction of natural attenuation based on intrinsic aquifer microbiota.     

Biotreatment of groundwater contaminated with MTBE: interaction of common environmental co-contaminants

Contamination of groundwater with the gasoline additive methyl tert-butyl ether (MTBE) is often accompanied by many aromatic components such as benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene (BTEX). In this study, a laboratory-scale biotrickling filter for groundwater treatment inoculated with a microbial consortium degrading MTBE was studied. Individual or mixtures of BTEX compounds were transiently loaded in combination with MTBE. The results indicated that single BTEX compound or BTEX mixtures inhibited MTBE degradation to varying degrees, but none of them completely repressed the metabolic degradation in the biotrickling filter. Tert-butyl alcohol (TBA), a frequent co-contaminant of MTBE had no inhibitory effect on MTBE degradation. The bacterial consortium was stable and showed promising capabilities to remove TBA, ethylbenzene and toluene, and partially degraded benzene and xylenes without significant lag time. The study suggests that it is feasible to deploy a mixed bacterial consortia to degrade MTBE, BTEX and TBA at the same time.     

Degradation of BTEX compounds in liquid media and in peat biofilters

A mixed culture, enriched from Sphagnum peat moss, contaminated with gasoline vapours, degraded individual and mixed components of BTEX (benzene, toluene, ethylbenzene, xylene). Complete degradation of radiolabelled toluene by the mixed culture was observed in mineralisation studies. Individual isolates from a mixed culture containingPseudomonas maltophilia, P. testosteroni andP. putida biotype A exhibited contrasting BTEX degradation patterns. WhileP. putida biotype A degraded all of the BTEX compounds,P. maltophilia andP. testosteroni, appeared unable to degrade benzene and xylenes, respectively. When the peat, inoculated with the mixed culture, was used as a biofilter (6.2 cm diameter ×93 cm length) for degradation of toluene and ethylbenzene vapours, percentage removal efficiencies were 99 and 85, respectively. When the capacity of the biofilter to degrade a combination of BTEX compounds was evaluated, percentage removal efficiencies for toluene, ethylbenzene,p-xylene,o-xylene and benzene were 99, 85, 82, 80 and 78, respectively. The importance of using the mixed culture as an inoculum in the biofilter was established and also the relationship between contaminated vapour flow rate and percentage removal efficiency.     

In situ bioremediation of monoaromatic pollutants in groundwater: a review

Monoaromatic pollutants such as benzene, toluene, ethylbenzene and mixture of xylenes are now considered as widespread contaminants of groundwater. In situ bioremediation under natural attenuation or enhanced remediation has been successfully used for removal of organic pollutants, including monoaromatic compounds, from groundwater. Results published indicate that in some sites, intrinsic bioremediation can reduce the monoaromatic compounds content of contaminated water to reach standard levels of potable water. However, engineering bioremediation is faster and more efficient. Also, studies have shown that enhanced anaerobic bioremediation can be applied for many BTEX contaminated groundwaters, as it is simple, applicable and economical.

This paper reviews microbiology and metabolism of monoaromatic biodegradation and in situ bioremediation for BTEX removal from groundwater under aerobic and anaerobic conditions. It also discusses the factors affecting and limiting bioremediation processes and interactions between monoaromatic pollutants and other compounds during the remediation processes.     

Ethanol, BTEX and microbial community interactions in E-blend contaminated soil slurry

Degradation of benzene, toluene, ethylbenzene, m-, p- and o-xylenes (BTEX) and microbial community shifts in soil slurries contaminated with ethanol–gasoline blends (E-blends), containing 10, 50 or 90% (v/v) ethanol (E10, E50 and E90) were studied in soil slurries previously uncontaminated, contaminated by E-blends or ethanol. BTEX originating from E50 degraded fastest whereas from E10 slowest. Among the individual compounds, ethylbenzene degraded fastest (max 30% d⁻¹), and o-xylene slowest (min 1% d⁻¹) during aerobic conditions in previously not contaminated soils. Previous contamination by E-blends increased BTEX degradation significantly (3–19 times) compared with previously uncontaminated soils, whereas previous contamination with ethanol did not show significant difference in BTEX degradation. At least one type of the E-blends during aerobic conditions had a positive effect on total PLFAs (phospholipid fatty acids) and specific PLFAs, i.e. 10Me18:0, 16:1ω6 and cy17:0, but had a negative effect on cy19:0 and 18:2ω6,9c. The effects on total PLFAs, as well as the individual PLFAs, were particularly strong after repeated contamination. The single most affected PLFA was 16:1ω6, which increased 23 times during E10 treatment in soil slurries previously contaminated by E-blends. Altogether, the various E-blends had significantly different effects on BTEX degradation and also on individual PLFAs under aerobic conditions.     

Enhanced anaerobic biodegradation of BTEX-ethanol mixtures in aquifer columns amended with sulfate,chelated ferric iron or nitrate

Flow-through aquifer columns were used to investigate the feasibility of adding sulfate, EDTA–Fe(III) or nitrate to enhance the biodegradation of BTEX and ethanol mixtures. The rapid biodegradation of ethanol near the inlet depleted the influent dissolved oxygen (8 mg l^-1), stimulated methanogenesis, and decreased BTEX biodegradation efficiencies from >99% in the absence of ethanol to an average of 32% for benzene, 49% for toluene, 77% for ethylbenzene, and about 30% for xylenes. The addition of sulfate, EDTA–Fe(III) or nitrate suppressed methanogenesis and significantly increased BTEX biodegradation efficiencies. Nevertheless, occasional clogging was experienced by the column augmented with EDTA–Fe(III) due to iron precipitation. Enhanced benzene biodegradation (>70% in all biostimulated columns) is noteworthy because benzene is often recalcitrant under anaerobic conditions. Influent dissolved oxygen apparently played a critical role because no significant benzene biotransformation was observed after oxygen was purged out of the influent media. The addition of anaerobic electron acceptors could enhance BTEX biodegradation not only by facilitating their anaerobic biodegradation but also by accelerating the mineralization of ethanol or other substrates that are labile under anaerobic conditions. This would alleviate the biochemical oxygen demand (BOD) and increase the likelihood that entraining oxygen would be used for the biotransformation of residual BTEX.     

Kinetics of BTEX degradation in a packed-bed anaerobic reactor

The ever-increasing diversity of industrial activity is responsible for the discharge of compounds that are toxic or difficult to degrade into the environment. Some of the compounds found in surface and ground waters, usually deriving from the contamination of oil-based products, are benzene, toluene, ethylbenzene and xylenes (BTEX). To remove these compounds from contaminated water, a bench-scale horizontal-flow anaerobic immobilized biomass reactor, containing anaerobic biomass from various sources immobilized in polyurethane foam matrices, was employed to treat a synthetic substrate composed of protein, carbohydrates and BTEX solution in ethanol, as well as a BTEX solution in ethanol as the sole carbon source. The reactor removed up to 15.0 mg/l of each BTEX compound over a hydraulic detention time of 11.4 h. A first-order kinetic model fitted the experimental data well, showing correlation coefficients higher than 0.994. The apparent first-order coefficient values, , ranged from 8.4±1.5 day⁻¹ for benzene to 10.7±1.4 day⁻¹ for o-xylene in the presence of ethanol, protein and carbohydrates, and from 10.0±2.0 day⁻¹ for benzene to 13.0±1.7 day⁻¹ for o-xylene in the presence of ethanol. The BTEX degradation rates estimated here were 10- to 94-fold higher than those found in reports on microcosm studies.