Detection and characterization of agarose-binding, capsid-like particles produced during assembly of a bacteriophage T7 procapsid.

It has previously been shown that: (i) during infection of its host, the DNA bacteriophage T7 assembles a DNA-free procapsid (capsid I), a capsid with an envelope differing physically and chemically from the capsid of the mature bacteriophage, and (ii) capsid I converts to a capsid (capsid II) with a bacteriophage-like envelope as it packages DNA. Lysates of phage T7-infected Escherichia coli contained a particle (AG particle) which copurified with capsid II during buoyant density sedimentation, velocity sedimentation, and solid support-free electrophoresis, but was distinguished from capsid II by its apparent diversity during electrophoresis in agarose gels. Treatment of AG particles with trypsin converted most of them to particles that comigrated with trypsin-treated capsid II during electrophoresis in agarose gels. Irreversible binding of AG particles to agarose gels was shown to contribute to the apparent diversity of AG particles during agarose gel electrophoresis. The results of quantitation of AG particles and of capsid I and capsid II in lysates of a nonpermissive host infected with T7 amber mutants suggested that, in site of their capsid II-like properties, most AG particles were produced during assembly of capsid I and not during DNA packaging. The presence of AG particles in T7 lysates explains contradictions in previous data concerning the pathway of T7 assembly.     

Assembly of bacteriophage T7. Dimensions of the bacteriophage and its capsids.

The dimensions of bacteriophage T7 and T7 capsids have been investigated by small-angle x-ray scattering. Phage T7 behaves like a sphere of uniform density with an outer radius of 301 +/- 2 A (excluding the phage tail) and a calculated volume for protein plus nucleic acid of 1.14 +/- 0.05 x 10(-16) ml. The outer radius determined for T7 phage in solution is approximately 30% greater than the radius measured from electron micrographs, which indicates that considerable shrinkage occurs during preparation for electron microscopy. Capsids that have a phagelike envelope and do not contain DNA were obtained from lysates of T7-infected Escherichia coli (capsid II) and by separating the capsid component of T7 phage from the phage DNA by means of temperature shock (capsid IV). In both cases the peak protein density is at a radius of 275 A; the outer radius is 286 +/- 4 A, approximately 5% smaller than the envelope of T7 phage. The thickness of the envelope of capsid II is 22 +/- 4 A, consistent with the thickness of protein estimated to be 23 +/- 5 A in whole T7 phage, as seen on electron micrographs in which the internal DNA is positively stained. The volume in T7 phage available to package DNA is estimated to be 9.2 +/- 0.4 x 10(-17) ml. The packaged DNA adopts a regular packing with 23.6 A interplanar spacing between, DNA strands. The angular width of the 23.6 A reflection shows that the mean DNA-DNA spacing throughout the phage head is 27.5 +/- less than 2.2 A. A T7 precursor capsid (capsid I) expands when pelleted for x-ray scattering in the ultracentrifuge to essentially the same outer dimensions as for capsids II and IV. This expansion of capsid I can be prevented by fixing with glutaraldehyde; fixed capsid I has peak density at a radius of 247 A, 10% less than capsid II or IV.     

A domain of the hepadnavirus capsid protein is specifically required for DNA maturation and virus assembly

Mutations introduced into the capsid gene of duck hepatitis B virus (DHBV) were tested for their effects on viral DNA synthesis and assembly of enveloped viruses. Four classes of mutant phenotypes were observed among a series of deletions of covering the 3' end of the capsid open reading frame. Class I mutant capsids were able to support normal single-stranded and relaxed circular viral DNA synthesis; class II mutant capsids supported normal single-stranded DNA synthesis but not relaxed circular DNA synthesis; class III mutant capsids resembled class II capsids, but viral DNA synthesis was inhibited 5- to 10-fold; and class IV capsids were severely restricted in their ability to support viral DNA synthesis. Class I capsids were assembled into enveloped virions, but class II, III, and IV capsids were not. Viral DNA synthesized inside class II capsids was normal with respect to minus-strand DNA initiation, plus-strand DNA initiation, and circularization of the DNA, but plus strands failed to be elongated to mature 3-kb DNA. The results suggest that a function of the capsid protein specifically required for viral DNA maturation is also required for assembly of nucleocapsids into envelopes. Thus, class II mutants appear to be defective in the appearance of the "packaging signal" for virus assembly (J. Summers and W. Mason, Cell 29:403-415, 1982).     

Epifluorescent microscopy to evaluate bacteriophage capsid integrity

The standard method to evaluate capsid integrity of DNA-based viruses, which depends on access to DNase I, relies on the removal of the capsid by solvent extraction and then the evaluation of the nucleic acid products by electrophoresis. Our method, which is based on the direct detection of capsid-borne DNA directly through the use of epifluorescent microscopy, negates the requirement of DNA extraction.     

DNA Binding and Condensation Properties of the Herpes Simplex Virus Type 1 Triplex Protein VP19C

Herpesvirus capsids are regular icosahedrons with a diameter of a 125 nm and are made up of 162 capsomeres arranged on a T = 16 lattice. The capsomeres (VP5) interact with the triplex structure, which is a unique structural feature of herpesvirus capsid shells. The triplex is a heterotrimeric complex; one molecule of VP19C and two of VP23 form a three-pronged structure that acts to stabilize the capsid shell through interactions with adjacent capsomeres. VP19C interacts with VP23 and with the major capsid protein VP5 and is required for the nuclear localization of VP23. Mutation of VP19C results in the abrogation of capsid shell synthesis. Analysis of the sequence of VP19C showed the N-terminus of VP19C is very basic and glycine rich. It was hypothesized that this domain could potentially bind to DNA. In this study an electrophoretic mobility shift assay (EMSA) and a DNA condensation assay were performed to demonstrate that VP19C can bind DNA. Purified VP19C was able to bind to both a DNA fragment of HSV-1 origin as well as a bacterial plasmid sequence indicating that this activity is non-specific. Ultra-structural imaging of the nucleo-protein complexes revealed that VP19C condensed the DNA and forms toroidal DNA structures. Both the DNA binding and condensing properties of VP19C were mapped to the N-terminal 72 amino acids of the protein. Mutational studies revealed that the positively charged arginine residues in this N-terminal domain are required for this binding. This DNA binding activity, which resides in a non-conserved region of the protein could be required for stabilization of HSV-1 DNA association in the capsid shell.     

Comparison of the physical properties and assembly pathways of the related bacteriophages T7, T3 and phi II

To understand constraints on the evolution of bacteriophage assembly, the structures, electrophoretic mobilities (mu) and assembly pathways of the related double-stranded DNA bacteriophages T7, T3 and phi II, have been compared. The characteristics of the following T7, T3 and phi II capsids in these assembly pathways have also been compared: (1) a DNA-free procapsid (capsid I) that packages DNA during assembly; (b) a DNA packaging-associated conversion product of capsid I (capsid II). The molecular weights of the T3 and phi II genomes were 25.2 X 10(6) and 25.9 (+/- 0.2) X 10(6) (26.44 X 10(6) for T7, as previously determined), as determined by agarose gel electrophoresis of intact genomes. The radii of T7, T3 and phi II bacteriophages were indistinguishable by sieving during agarose gel electrophoresis (+/- 4%) and measurement of the bacteriophage hydration (+/- 2%) (30.1 nm for T7, as previously determined). Assuming a T = 7 icosahedral lattice for the arrangement of the major capsid subunits (p10A) of T7, T3 and phi II best explains these data and data previously obtained for T7. At pH 7.4 and an ionic strength of 1.2, the solid-support-free mu values (mu 0 values) of T7, T3 and phi II bacteriophages, obtained by extrapolation of mu during agarose gel electrophoresis to an agarose concentration of 0 and correction for electro-osmosis, were -0.71, -0.91 and -1.17(X 10(-4) cm2V-1 s-1. The mu 0 values of T7, T3 and phi II capsids I were -1.51, -1.58 and -2.07(X 10(-4] cm2V-1 s-1. For the capsids II, these mu 0 values were -0.82, -1.07 and -1.37(X 10(-4] cm2V-1 s-1. The tails of all three bacteriophages were positively charged and the capsid envelopes (heads) were negatively charged. In all cases the procapsid had a negative mu 0 value larger in magnitude than the negative mu 0 value for bacteriophage or capsid II. A trypsin-sensitive region in capsid I-associated, but not capsid II-associated, T3 p10A was observed (previously observed for T7). The largest fragment of trypsinized capsid I-associated p10A had the same molecular weight in T7 and T3, although the T3 p10A is 18% more massive than the T7 p10A. It is suggested that the trypsin-resistant region of capsid I-associated p10A determines the radius of the bacteriophage capsid.     

Identification of proteins interacting with newly replicated DNA in SV40-infected cells by UV-induced DNA-protein cross-linking

Protein species interacting with newly replicated DNA were analyzed using a photo cross-linking technique. Nascent DNA was labeled in vitro with [alpha-32P]dCTP and BrdUTP in SV40-infected CV-1 cells made permeable with saponin. The labeled cells were then irradiated with UV light (254 nm) and were treated extensively with DNase I. Proteins with radioactive DNA tags were separated by SDS-PAGE and visualized by autoradiography. Among 10-15 proteins which were cross-linked, the proteins with apparent molecular weights of 16.5 K, 44 K, 82 K and those in the 94-140 K region appeared to be associated with newly replicated SV40 DNA. A pulse-chase experiment showed that the 82 K and 94-140 K proteins interacted with new DNA in a relatively localized region close to the replication fork. The 44 K protein was identified as the major viral capsid protein, VP1, using antiserum to SV40 capsid proteins. It was suggested that VP1 binds to nascent DNA shortly after DNA synthesis and migrates into chromatin maturation regions.     

Electrophoresis of bacteriophage T7 and T7 capsids in agarose gels.

Agarose gel electrophoresis of the following was performed in 0.05 M sodium phosphate-0.001 M MgCl2 (pH 7.4): (i) bacteriophage T7; (ii) a T7 precursor capsid (capsid I), isolated from T7-infected Escherichia coli, which has a thicker and less angular envelope than bacteriophage T7; (iii) a second capsid (capsid II), isolated from T7-infected E. coli, which has a bacteriophage-like envelope; and (iv) capsids (capsid IV) produced by temperature shock of bacteriophage T7. Bacteriophage T7 and all of the above capsids migrated towards the anode. In a 0.9% agarose gel, capsid I had an electrophoretic mobility of 9.1 +/- 0.4 X 10(-5) cm2/V.s; bacteriophage T7 migrated 0.31 +/- 0.02 times as fast as capsid I. The mobilities of different preparations of capsid II varied in such gels: the fastest-migrating capsid II preparation was 0.51 +/- 0.03 times as fast as capsid I and the slowest was 0.37 +/- 0.02 times as fast as capsid I. Capsid IV with and without the phage tail migrated 0.29 +/- 0.02 and 0.42 +/- 0.02 times as fast as capsid I. The results of the extrapolation of bacteriophage and capsid mobilities to 0% agarose concentration indicated that the above differences in mobility are caused by differences in average surface charge density. To increase the accuracy of mobility comparisons and to increase the number of samples that could be simultaneously analyzed, multisample horizontal slab gels were used. Treatment with the ionic detergent sodium dodecyl sulfate converted capsid I to a capsid that migated in the capsid II region during electrophoresis through agarose gels. In the electron microscope, most of the envelopes of these latter capsids resembled the capsid II envelope, but some envelope regions were thicker than the capsid II envelope.     

Dynamics of bacteriophage genome ejection in vitro and in vivo

Bacteriophages, phages for short, are viruses of bacteria. The majority of phages contain a double-stranded DNA genome packaged in a capsid at a density of ～500 mg ml(-1). This high density requires substantial compression of the normal B-form helix, leading to the conjecture that DNA in mature phage virions is under significant pressure, and that pressure is used to eject the DNA during infection. A large number of theoretical, computer simulation and in vitro experimental studies surrounding this conjecture have revealed many--though often isolated and/or contradictory--aspects of packaged DNA. This prompts us to present a unified view of the statistical physics and thermodynamics of DNA packaged in phage capsids. We argue that the DNA in a mature phage is in a (meta)stable state, wherein electrostatic self-repulsion is balanced by curvature stress due to confinement in the capsid. We show that in addition to the osmotic pressure associated with the packaged DNA and its counterions, there are four different pressures within the capsid: pressure on the DNA, hydrostatic pressure, the pressure experienced by the capsid and the pressure associated with the chemical potential of DNA ejection. Significantly, we analyze the mechanism of force transmission in the packaged DNA and demonstrate that the pressure on DNA is not important for ejection. We derive equations showing a strong hydrostatic pressure difference across the capsid shell. We propose that when a phage is triggered to eject by interaction with its receptor in vitro, the (thermodynamic) incentive of water molecules to enter the phage capsid flushes the DNA out of the capsid. In vivo, the difference between the osmotic pressures in the bacterial cell cytoplasm and the culture medium similarly results in a water flow that drags the DNA out of the capsid and into the bacterial cell.     

Function of an internal bacteriophage T7 core during assembly of a T7 procapsid.

A DNA-free, proteinaceous procapsid of bacteriophage T7 (capsid I) has been shown in previous studies to consist of an external, spherical shell (envelope) and an internal, cylindrical core with fibrous projections that connect the core to the envelope. To determine the role of the core in assembly of the envelope of capsid I, the kinetics of appearance of capsid I and possible intermediates in capsid I assembly (AG particles) were determined in the presence and absence of the core. For obtaining these data, agarose gel electrophoresis was used and appeared to be a technique more accurate and efficient than techniques used for obtaining similar data in the past. The results of these experiments were: (i) in the presence of the core, AG particles behaved kinetically as intermediates in the assembly of capsid I; (ii) in the absence of the core, assembly of capsid I terminated prematurely and AG particles accumulated. These and other data have been interpreted by assuming that: AG particles are breakdown products of precursors of capsid I; these precursors have uncorrected errors in the assembly of their envelope; and a function of the core is to correct these errors.     

Packaging of a unit-length viral genome: the role of nucleotides and the gpD decoration protein in stable nucleocapsid assembly in bacteriophage lambda

The developmental pathways for a variety of eukaryotic and prokaryotic double-stranded DNA viruses include packaging of viral DNA into a preformed procapsid structure, catalyzed by terminase enzymes and fueled by ATP hydrolysis. In most instances, a capsid expansion process accompanies DNA packaging, which significantly increases the volume of the capsid to accommodate the full-length viral genome. “Decoration” proteins add to the surface of the expanded capsid lattice, and the terminase motors tightly package DNA, generating up to ∼ 20 atm of internal capsid pressure. Herein we describe biochemical studies on genome packaging using bacteriophage λ as a model system. Kinetic analysis suggests that the packaging motor possesses at least four ATPase catalytic sites that act cooperatively to effect DNA translocation, and that the motor is highly processive. While not required for DNA translocation into the capsid, the phage λ capsid decoration protein gpD is essential for the packaging of the penultimate 8-10 kb (15-20%) of the viral genome; virtually no DNA is packaged in the absence of gpD when large DNA substrates are used, most likely due to a loss of capsid structural integrity. Finally, we show that ATP hydrolysis is required to retain the genome in a packaged state subsequent to condensation within the capsid. Presumably, the packaging motor continues to “idle” at the genome end and to maintain a positive pressure towards the packaged state. Surprisingly, ADP, guanosine triphosphate, and the nonhydrolyzable ATP analog 5'-adenylyl-beta,gamma-imidodiphosphate (AMP-PNP) similarly stabilize the packaged viral genome despite the fact that they fail to support genome packaging. In contrast, the poorly hydrolyzed ATP analog ATP-γS only partially stabilizes the nucleocapsid, and a DNA is released in “quantized” steps. We interpret the ensemble of data to indicate that (i) the viral procapsid possesses a degree of plasticity that is required to accommodate the packaging of large DNA substrates; (ii) the gpD decoration protein is required to stabilize the fully expanded capsid; and (iii) nucleotides regulate high-affinity DNA binding interactions that are required to maintain DNA in the packaged state.     

Protein-DNA interactions determine the shapes of DNA toroids condensed in virus capsids

DNA toroids that form inside the bacteriophage capsid present different shapes according to whether they are formed by the addition of spermine or polyethylene glycol to the bathing solution. Spermine-DNA toroids present a convex, faceted section with no or minor distortions of the DNA interstrand spacing with respect to those observed in the bulk, whereas polyethylene glycol-induced toroids are flattened to the capsid inner surface and show a crescent-like, nonconvex shape. By modeling the energetics of the DNA toroid using a free-energy functional composed of energy contributions related to the elasticity of the wound DNA, exposed surface DNA energy, and adhesion between the DNA and the capsid, we established that the crescent shape of the toroidal DNA section comes from attractive interactions between DNA and the capsid. Such attractive interactions seem to be specific to the PEG condensation process and are not observed in the case of spermine-induced DNA condensation.     

Fibrous projections from the core of a bacteriophage T7 procapsid

A cylindrical core previously demonstrated in a bacteriophage T7 procapsid (capsid I) has been further examined by electron microscopy. Fibrous extensions of the core have been observed; these fibers appear to connect the core to the capsid I envelope. After infection of a nonpermissive host with bacteriophage T7 amber mutant in any gene coding for a core protein, the resulting lysates contained more noncapsid assemblies of capsid envelope protien than did wild-type lysates; these assemblies had a mass two to at least 500 times greater than the mass of capsid I. This suggests that the internal core and fibers assist the assembly of subunits in the envelope of capsid I.     

Assembly-associated structural changes of bacteriophage T7 capsids. Detection by use of a protein-specific probe.

To detect changes in capsid structure that occur when a preassembled bacteriophage T7 capsid both packages and cleaves to mature-size longer (concatameric) DNA, the kinetics and thermodynamics are determined here for the binding of the protein-specific probe, 1,1'-bi(4-anilino)naphthalene-5,5'-di-sulfonic acid (bis-ANS), to bacteriophage T7, a T7 DNA deletion (8.4%) mutant, and a DNA-free T7 capsid (metrizamide low density capsid II) known to be a DNA packaging intermediate that has a permeability barrier not present in a related capsid (metrizamide high density capsid II). Initially, some binding to either bacteriophage or metrizamide low density capsid II occurs too rapidly to quantify (phase 1, duration < 10 s). Subsequent binding (phase 2) occurs with first-order kinetics. Only the phase 1 binding occurs for metrizamide high density capsid II. These observations, together with both the kinetics of the quenching by ethidium of bound bis-ANS fluorescence and the nature of bis-ANS-induced protein alterations, are explained by the hypothesis that the phase 2 binding occurs at internal sites. The number of these internal sites increases as the density of the packaged DNA decreases. The accompanying change in structure is potentially the signal for initiating cleavage of a concatemer. Evidence for the following was also obtained: (a) a previously undetected packaging-associated change in the conformation of the major protein of the outer capsid shell and (b) partitioning by a permeability barrier of the interior of the T7 capsid.     

Induced extrusion of DNA from the capsid of herpes simplex virus type 1.

DNA-filled capsids (C capsids) of herpes simplex virus type 1 were treated in vitro with guanidine-HCl (GuHCl) and analyzed for DNA loss by sucrose density gradient ultracentrifugation and electron microscopy. DNA was found to be lost quantitatively from virtually all capsids treated with GuHCl at concentrations of 0.5 M or higher, while 0.1 M GuHCl had little or no effect. DNA removal from 0.5 M GuHCl-treated capsids was effected without significant change in the capsid protein composition, as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, or in its structure, as judged by electron microscopy. Electron microscopic examination of capsids in the process of emptying showed that DNA was extruded from multiple, discrete sites which appeared to coincide with capsid vertices. DNA exited the capsid in the form of thick strands or fibers that varied in diameter from approximately 4 to 13 nm with preferred diameters of 7 and 11 nm. The fibers most probably correspond to multiple, laterally aligned DNA segments, as their diameters are nearly all greater than that of a single DNA double helix. The results suggest that GuHCl treatment promotes an alteration in the capsid pentons which allows DNA to escape locally. Hexons must be more resistant to this change, since DNA loss appears to be restricted to the pentons. The ability of GuHCl to cause loss of DNA from C capsids with no accompanying change in capsid morphology or protein composition suggests that penton sites may open transiently to permit DNA exist and then return to their original state.     

Structure and Development of Viruses as Observed in the Electron Microscope: XI. Entry and Uncoating of Herpes Simplex Virus

Two morphologically distinct types of capsids are described. The dense capsid appeared to be disrupted near the cellular membrane with release of core material. The light capsid was more stable and was frequently encountered close to the nucleus, where empty capsids were also found. Pretreatment of cells before infection with either puromycin or actinomycin D markedly decreased the percentage of empty capsids. It is suggested that the two types of capsids play different roles in the process of initiating infection. One (the dense capsid) releases deoxyribonucleic acid (DNA) shortly after entry. This DNA is transcribed into a virus-specific ribonucleic acid, which codes for an enzyme capable of altering the permeability of the second type of capsid (the light capsid). In proximity to the nucleus, the infectious DNA then escapes without gross disruption of the capsid.     

Ion-dependent DNA configuration in bacteriophage capsids

Bacteriophages densely pack their long double-stranded DNA genome inside a protein capsid. The conformation of the viral genome inside the capsid is consistent with a hexagonal liquid crystalline structure. Experiments have confirmed that the details of the hexagonal packing depend on the electrochemistry of the capsid and its environment. In this work, we propose a biophysical model that quantifies the relationship between DNA configurations inside bacteriophage capsids and the types and concentrations of ions present in a biological system. We introduce an expression for the free energy that combines the electrostatic energy with contributions from bending of individual segments of DNA and Lennard-Jones-type interactions between these segments. The equilibrium points of this energy solve a partial differential equation that defines the distributions of DNA and the ions inside the capsid. We develop a computational approach that allows us to simulate much larger systems than what is possible using the existing molecular-level methods. In particular, we are able to estimate bending and repulsion between the DNA segments as well as the full electrochemistry of the solution, both inside and outside of the capsid. The numerical results show good agreement with existing experiments and with molecular dynamics simulations for small capsids.