Structural and thermodynamic analyses of the interaction between melittin and lipopolysaccharide

Lipopolysaccharide (LPS), the major constituent of the outer membrane of Gram-negative bacteria, is the very first site of interactions with the antimicrobial peptides. In this work, we have determined a solution conformation of melittin, a well-known membrane active amphiphilic peptide from honey bee venom, by transferred nuclear Overhauser effect (Tr-NOE) spectroscopy in its bound state with lipopolysaccharide. The LPS bound conformation of melittin is characterized by a helical structure restricted only to the C-terminus region (residues A15-R24) of the molecule. Saturation transfer difference (STD) NMR studies reveal that several C-terminal residues of melittin including Trp19 are in close proximity with LPS. Isothermal titration calorimetry (ITC) data demonstrates that melittin binding to LPS or lipid A is an endothermic process. The interaction between melittin and lipid A is further characterized by an equilibrium association constant (Ka) of 2.85 x 10(6) M(-1) and a stoichiometry of 0.80, melittin/lipid A. The estimated free energy of binding (delta G0), -8.8 kcal mol(-1), obtained from ITC experiments correlates well with a partial helical structure of melittin in complex with LPS. Moreover, a synthetic peptide fragment, residues L13-Q26 or mel-C, derived from the C-terminus of melittin has been found to contain comparable outer membrane permeabilizing activity against Escherichia coli cells. Intrinsic tryptophan fluorescence experiments of melittin and mel-C demonstrate very similar emission maxima and quenching in presence of LPS micelles. The Red Edge Excitation Shift (REES) studies of tryptophan residue indicate that both peptides are located in very similar environment in complex with LPS. Collectively, these results suggest that a helical conformation of melittin, at its C-terminus, could be an important element in recognition of LPS in the outer membrane.     

The actions of melittin on membranes

The molecular mechanisms underlying the various effects of melittin on membranes have not been completely defined and much of the evidence described indicates that different molecular mechanisms may underlie different actions of the peptide. Ideas about the formation of transbilayer aggregates of melittin under the influence of a transbilayer potential, and for bilayer structural perturbation arising from the location of the peptide helix within the head group region of the membrane have been made based on the crystal structure of the peptide, the kinetics and concentration dependence of melittins membrane actions, together with simple ideas about the conformational properties of amphipathic helical peptides and their interactions with membranes. Physical studies of the interaction of melittin with model membranes have been useful in determining the potential of the peptide to adopt different locations, orientations and association states within membranes under different conditions, but the relationship of the results obtained to the actions of melittin in cell membranes or under the influence of a membrane potential are unclear. Experimental definition of the interaction of melittin with more complex membranes, including the erythrocyte membrane or in bilayers under the influence of a transmembrane potential, will require direct study in these membranes. Experiments employing labeled melittins for ESR, NMR or fluorescence experiments are promising both for their sensitivity (ESR and fluorescence) and the ability to focus on the peptide within the background of endogenous proteins within cell membranes. The study of melittin in model membranes has been useful for the development of methodology for determination of membrane protein structures. Despite the structural complexity of integral membrane proteins, it is interesting that in some respects their study be more straightforward, lacking as they do the elusive properties of melittin (and other structurally labile membrane peptides) which limit the possibility of defining their interaction with membranes in terms of a single conformation, location, orientation and association state within the membrane.     

The effect of cyclization of magainin 2 and melittin analogues on structure, function, and model membrane interactions: implication to their mode of action

The amphipathic alpha-helical structure is a common motif found in membrane binding polypeptides including cell lytic peptides, antimicrobial peptides, hormones, and signal sequences. Numerous studies have been undertaken to understand the driving forces for partitioning of amphipathic alpha-helical peptides into membranes, many of them based on the antimicrobial peptide magainin 2 and the non-cell-selective cytolytic peptide melittin, as paradigms. These studies emphasized the role of linearity in their mode of action. Here we synthesized and compared the structure, biological function, and interaction with model membranes of linear and cyclic analogues of these peptides. Cyclization altered the binding of melittin and magainin analogues to phospholipid membranes. However, at similar bound peptide:lipid molar ratios, both linear and cyclic analogues preserved their high potency to permeate membranes. Furthermore, the cyclic analogues preserved approximately 75% of the helical structure of the linear peptides when bound to membranes. Biological activity studies revealed that the cyclic melittin analogue had increased antibacterial activity but decreased hemolytic activity, whereas the cyclic magainin 2 analogue had a marked decrease in both antibacterial and hemolytic activities. The results indicate that the linearity of the peptides is not essential for the disruption of the target phospholipid membrane, but rather provides the means to reach it. In addition, interfering with the coil-helix transition by cyclization, while maintaining the same sequence of hydrophobic and positively charged amino acids, allows a separated evaluation of the hydrophobic and electrostatic contributions to binding of peptides to membranes.     

Antibacterial and antifungal properties of alpha-helical, cationic peptides in the venom of scorpions from southern Africa.

Two novel pore-forming peptides have been isolated from the venom of the South-African scorpion Opistophtalmus carinatus. These peptides, designated opistoporin 1 and 2, differ by only one amino acid and belong to a group of alpha-helical, cationic peptides. For the first time, a comparison of the primary structures of alpha-helical pore-forming peptides from scorpion venom was undertaken. This analysis revealed that peptides in the range of 40-50 amino acids contain a typical scorpion conserved sequence S(x)3KxWxS(x)5L. An extensive study of biological activity of synthesized opistoporin 1 and parabutoporin, a pore-forming peptide previously isolated from the venom of the South-African scorpion Parabuthus schlechteri, was undertaken to investigate an eventual cell-selective effect of the peptides. Opistoporin 1 and parabutoporin were most active in inhibiting growth of Gram-negative bacteria (1.3-25 micro m), while melittin and mastoparan, two well-known cytolytic peptides, were more effective against Gram-positive bacteria in the same concentration range. In addition, the peptides showed synergistic activity with some antibiotics commonly used in therapy. Opistoporin 1 and parabutoporin had hemolytic activity intermediate between the least potent mastoparan and the highly lytic melittin. Furthermore, all peptides inhibited growth of fungi. Experiments with SYTOX green suggested that this effect is related to membrane permeabilization.     

Rational design of cationic antimicrobial peptides by the tandem of leucine-rich repeat

Antimicrobial peptides represent ancient host defense effector molecules present in organisms across the evolutionary spectrum. Lots of antimicrobial peptides were synthesized based on well-known structural motif widely existed in a variety of lives. Leucine-rich repeats (LRRs) are sequence motifs present in over 60,000 proteins identified from viruses, bacteria, and eukaryotes. To elucidate if LRR motif possesses antimicrobial potency, two peptides containing one or two LRRs were designed. The biological activity and membrane–peptide interactions of the peptides were analyzed. The results showed that the tandem of two LRRs exhibited similar antibacterial activity and significantly weaker hemolytic activity against hRBCs than the well-known membrane active peptide melittin. The peptide with one LRR was defective at antimicrobial and hemolytic activity. The peptide containing two LRRs formed α-helical structure, respectively, in the presence of membrane-mimicking environment. LRR-2 retained strong resistance to cations, heat, and some proteolytic enzymes. The blue shifts of the peptides in two lipid systems correlated positively with their biological activities. Other membrane-peptide experiments further provide the evidence that the peptide with two LRRs kills bacteria via membrane-involving mechanism. The present study increases our new understanding of well-known LRR motif in antimicrobial potency and presents a potential strategy to develop novel antibacterial agents.     

Structural and functional characterization of peptides derived from the carboxy‐terminal region of a defensin from the tick Ornithodoros savignyi

Tick defensins may serve as templates for the development of multifunctional peptides. The purpose of this study was to evaluate shorter peptides derived from tick defensin isoform 2 (OsDef2) in terms of their antibacterial, antioxidant, and cytotoxic activities. We compared the structural and functional properties of a synthetic peptide derived from the carboxy‐terminal of the parent peptide (Os) to that of an analogue in which the three cysteine residues were omitted (Os–C). Here, we report that both peptides were bactericidal (MBC values ranging from 0.94–15 µg/ml) to both Gram‐positive and Gram‐negative bacteria, whereas the parent peptide only exhibited Gram‐positive antibacterial activity. The Os peptide was found to be two‐fold more active than Os–C against three of the four tested bacteria but equally active against Staphylococcus aureus. Os showed rapid killing kinetics against both Escherichia coli and Bacillus subtilis, whereas Os–C took longer, suggesting different modes of action. Scanning electron microscopy showed that in contrast to melittin for which blebbing of bacterial surfaces was observed, cells exposed to either peptide appeared flattened and empty. Circular dichroism data indicated that in a membrane‐mimicking environment, the cysteine‐containing peptide has a higher α‐helical content. Both peptides were found to be non‐toxic to mammalian cells. Moreover, the peptides displayed potent antioxidant activity and were 12 times more active than melittin. Multifunctional peptides hold potential for a wide range of clinical applications and further investigation into their mode of antibacterial and antioxidant properties is therefore warranted. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Free energy analysis of membrane pore formation process in the presence of multiple melittin peptides

Understanding the molecular mechanism underlying pore formation in lipid membranes by antimicrobial peptides is of great importance in biological sciences as well as in drug design applications. Melittin has been widely studied as a pore forming peptide, though the molecular mechanism for pore formation is still illusive. We examined the free energy barrier for the creation of a pore in lipid membranes with and without multiple melittin peptides. It was found that six melittin peptides significantly stabilized a pore, though a small barrier (a few k_BT) for the formation still existed. With five melittin peptides or fewer, the pore formation barrier was much higher, though the established pore was in a local energy minimum. Although seven melittins effectively reduced the free energy barrier, a single melittin peptide left the pore after a long time MD simulation probably because of the overcrowded environment around the bilayer pore. Thus, it is highly selective for the number of melittin peptides to stabilize the membrane pore, as was also suggested by the line tension evaluations. The free energy cost required to insert a single melittin into the membrane is too high to explain the one-by-one insertion mechanism for pore formation, which also supports the collective melittin mechanism for pore formation.     

Endosomolysis by masking of a membrane-active agent (EMMA) for cytoplasmic release of macromolecules

Endosomolysis, a critical barrier to efficient delivery of macromolecules such as nucleic acids, has been breached using a novel approach: endosomolysis by masking of a membrane-active agent (EMMA). To demonstrate the concept of EMMA, a cationic membrane-active peptide, melittin, was reversibly inhibited using a maleic anhydride derivative. At neutral pH, the lysines of melittin are covalently acylated with the anhydride, thereby inhibiting melittin's membrane disruption activity. Under acidic conditions such as those present within endosomes, the amide bond of the maleamate is cleaved, thus unmasking melittin. The active melittin can then disrupt the endosomal membrane resulting in release of biologically active molecules into the cytoplasm. This approach avoids cellular toxicity by restricting melittin's activity until it reaches the endosomal compartment. The utility of this approach was demonstrated by delivery phosphorodiamidate morpholino oligonucleotides (PMOs).     

Two states of cyclic antimicrobial peptide RTD-1 in lipid bilayers

RTD-1 is a recently discovered cyclic peptide that, like other well-studied antimicrobial peptides, appears to bind to the lipid matrix of cell membrane in the initial stage of activity. We studied the states of RTD-1 bound to lipid bilayers by two methods: oriented circular dichroism and X-ray diffraction. RTD-1 shows two physically distinct bound states in lipid bilayers like magainins, protegrins, alamethicin, and melittin that were previously studied. However, the nature of transition between the two states is different for RTD-1 as compared with the aforementioned peptides. In one of the two states, RTD-1 is oriented with its backbone ring parallel to the plane of the bilayer. Only in this state RTD-1 induces membrane thinning. But the effect of membrane thinning is much weaker than all other peptides, suggesting that the mechanism of RTD-1 may be different from the other peptides.     

Cooperative antimicrobial action of melittin on lipid membranes: A coarse-grained molecular dynamics study

We conducted a series of coarse-grained molecular dynamics (CG-MD) simulations to investigate the complicated actions of melittin, which is an antimicrobial peptide (AMP) derived from honey bee venom, on a lipid membrane. To accurately simulate the AMP action, we developed and used a protein CG model as an extension of the pSPICA force field (FF), which was designed to reproduce several thermodynamic quantities and structural properties. At a low peptide-to-lipid (P/L) ratio (1/102), no defect was detected. At P/L = 1/51, toroidal pore formation was observed due to collective insertion of multiple melittin peptides from the N-termini. The pore formation was initiated by a local increase in membrane curvature in the vicinity of the peptide aggregate. At a higher P/L ratio (1/26), two more modes were detected, seemingly not controlled by the P/L ratio but by a local arrangement of melittin peptides: 1. Pore formation accompanied by lipid extraction by melittin peptides:a detergent-like mechanism. 2. A rapidly formed large pore in a significantly curved membrane: bursting. Thus, we observed three pore formation modes (toroidal pore formation, lipid extraction, and bursting) depending on the peptide concentration and local arrangement. These observations were consistent with experimental observations and hypothesized melittin modes. Through this study, we found that the local arrangements and population of melittin peptides and the area expansion rate by membrane deformation were key to the initiation of and competition among the multiple pore formation mechanisms.     

Mode of action of cationic antimicrobial peptides defines the tethering position and the efficacy of biocidal surfaces

Covalent immobilization of cationic antimicrobial peptides (CAPs) at sufficient density and distance from the solid matrix has been suggested as a successful strategy for the generation of biocidal surfaces. To test the hypothesis that the mode of peptide action is decisive for the selection of an appropriate tethering position on solid surfaces, melittin (MEL), a channel-forming peptide, buforin 2 (BUF2), a peptide able to translocate bacterial membranes without permeabilization and targeting nucleic acids, and tritrpticin (TP), described to be membrane-lytic and to have intracellular targets, were C- and N-terminally immobilized on TentaGel S NH(2) resin beads as model surface. The peptide termini were modified with aminooxyacetic acid (AOA) and coupled via oxime-forming ligation. The comparison of the activities of the three peptides and their AOA-modified analogues with a KLAL model peptide which permeabilizes membranes by a so-called "carpet-like" mode provided the following results: The peptides in solution state were active against Bacillus subtilis and Escherichia coli at micromolar concentrations. MEL and TP but not BUF2-derived peptides permeabilized the inner and outer membrane of E. coli and enhanced the permeability of lipid bilayers at concentrations around their antimicrobial values (MICs). Immobilization reduced peptide activity to millimolar MICs. The activity reduction for KLAL was independent of the tethering position and comparably low, as reflected by a low ratio of MIC(tethered)/MIC(free). In contrary, the pore-forming MEL was much less active when immobilized at the N-terminus compared with the C-terminally tethered peptide. C- and N-terminal TP tethering caused an identical but much pronounced activity decrease. The tethered BUF2 peptides were inactive at the tested concentrations suggesting that the peptides could not reach the intracellular targets. In conclusion, membrane active peptides seem to be most suitable for the generation of antimicrobial surfaces, but knowledge about their mode of membrane insertion and positioning is required to identify optimal tethering positions. The relationship between the mechanism of action and position of immobilization is highly relevant for the establishment of a general approach to obtain efficient biocidal solid matrices loaded with CAPs.     

Lipid membrane interaction and antimicrobial activity of GsMTx-4, an inhibitor of mechanosensitive channel

GsMTx-4, a polypeptide from the spider Grammostola spatulata, is an inhibitor of mechanosensitive channels. It is known to interact with lipid membranes, suggesting it partitions into the membrane to alter the channel gating, but the effect of the membrane charge on GsMTx-4 activity remains unknown. In this study, we found that GsMTx-4 more effectively interacts with anionic lipids than zwitterionic ones. The effect of GsMTx-4 on negatively charged membranes was similar to that of the antimicrobial peptide melittin, which led us to assess GsMTx-4's antimicrobial activity. Interestingly, we found that, in contrast to other neurotoxins, GsMTx-4 exhibited antimicrobial properties and was more active against Gram-positive than Gram-negative bacteria. These results suggest that GsMTx-4 exerts its antimicrobial effect by altering the packing of the membrane and/or inhibiting mechanosensitive channels. These findings could point the way towards a new class of antimicrobial peptides.     

On the mechanism of pore formation by melittin

The mechanism of pore formation of lytic peptides, such as melittin from bee venom, is thought to involve binding to the membrane surface, followed by insertion at threshold levels of bound peptide. We show that in membranes composed of zwitterionic lipids, i.e. phosphatidylcholine, melittin not only forms pores but also inhibits pore formation. We propose that these two modes of action are the result of two competing reactions: direct insertion into the membrane and binding parallel to the membrane surface. The direct insertion of melittin leads to pore formation, whereas the parallel conformation is inactive and prevents other melittin molecules from inserting, hence preventing pore formation.     

Kinetics and mechanism of hemolysis induced by melittin and by a synthetic melittin analogue.

The cytotoxic peptide from honeybee venom, melittin, and a synthetic peptide analogue of it lyse human erythrocytes in a biphasic process. The kinetics of the lysis in 0.30 M sucrose, 0.01 M sodium phosphate, pH 7.30 at 4 degrees C were investigated. Our results show that melittin rapidly binds to the outer surface of the erythrocyte membrane, and the surface-bound monomers produce transient openings through which approximately 40 hemoglobin molecules can escape. Concomitantly, the melittin loses its ability to effect the process, presumably by translocation through the bilayer. The half-life for this process is 1.2 min. In a much slower process, dimers of this internalized melittin again produce transient membrane openings in a steady state. On a molar basis, the synthetic peptide analogue produces a fast process comparable to that caused by melittin, but is more efficient in the slow phase. Escape of hemoglobin and of carbonic anhydrase through the openings is diffusion controlled. These results suggest that the functional units necessary for the activity of melittin-like cytotoxic peptides are a 20 amino acid amphiphilic alpha-helix with a hydrophobic:hydrophilic ratio greater than 1 and a short segment with a high concentration of positive charges.     

Structural and thermodynamic analyses of the interaction between melittin and lipopolysaccharide

Lipopolysaccharide (LPS), the major constituent of the outer membrane of Gram-negative bacteria, is the very first site of interactions with the antimicrobial peptides. In this work, we have determined a solution conformation of melittin, a well-known membrane active amphiphilic peptide from honey bee venom, by transferred nuclear Overhauser effect (Tr-NOE) spectroscopy in its bound state with lipopolysaccharide. The LPS bound conformation of melittin is characterized by a helical structure restricted only to the C-terminus region (residues A15-R24) of the molecule. Saturation transfer difference (STD) NMR studies reveal that several C-terminal residues of melittin including Trp19 are in close proximity with LPS. Isothermal titration calorimetry (ITC) data demonstrates that melittin binding to LPS or lipid A is an endothermic process. The interaction between melittin and lipid A is further characterized by an equilibrium association constant (K_a) of 2.85 × 10⁶ M^− 1 and a stoichiometry of 0.80, melittin/lipid A. The estimated free energy of binding (ΔG⁰), − 8.8 kcal mol^− 1, obtained from ITC experiments correlates well with a partial helical structure of melittin in complex with LPS. Moreover, a synthetic peptide fragment, residues L13-Q26 or mel-C, derived from the C-terminus of melittin has been found to contain comparable outer membrane permeabilizing activity against Escherichia coli cells. Intrinsic tryptophan fluorescence experiments of melittin and mel-C demonstrate very similar emission maxima and quenching in presence of LPS micelles. The Red Edge Excitation Shift (REES) studies of tryptophan residue indicate that both peptides are located in very similar environment in complex with LPS. Collectively, these results suggest that a helical conformation of melittin, at its C-terminus, could be an important element in recognition of LPS in the outer membrane.     

Bilayer localization of membrane-active peptides studied in biomimetic vesicles by visible and fluorescence spectroscopies.

Depth of bilayer penetration and effects on lipid mobility conferred by the membrane-active peptides magainin, melittin, and a hydrophobic helical sequence KKA(LA)7KK (denoted KAL), were investigated by colorimetric and time-resolved fluorescence techniques in biomimetic phospholipid/poly(diacetylene) vesicles. The experiments demonstrated that the extent of bilayer permeation and peptide localization within the membrane was dependent upon the bilayer composition, and that distinct dynamic modifications were induced by each peptide within the head-group environment of the phospholipids. Solvent relaxation, fluorescence correlation spectroscopy and fluorescence quenching analyses, employing probes at different locations within the bilayer, showed that magainin and melittin inserted close to the glycerol residues in bilayers incorporating negatively charged phospholipids, but predominant association at the lipid-water interface occurred in bilayers containing zwitterionic phospholipids. The fluorescence and colorimetric analyses also exposed the different permeation properties and distinct dynamic influence of the peptides: magainin exhibited the most pronounced interfacial attachment onto the vesicles, melittin penetrated more into the bilayers, while the KAL peptide inserted deepest into the hydrophobic core of the lipid assemblies. The solvent relaxation results suggest that decreasing the lipid fluidity might be an important initial factor contributing to the membrane activity of antimicrobial peptides.     

Sizing membrane pores in lipid vesicles by leakage of co-encapsulated markers: pore formation by melittin.

Many toxins and antimicrobial peptides permeabilize membrane vesicles by forming multimeric pores. Determination of the size of such pores is an important first step for understanding their structure and the mechanism of their self-assembly. We report a simple method for sizing pores in vesicles based on the differential release of co-encapsulated fluorescently labeled dextran markers of two different sizes. The method was tested using the bee venom peptide melittin, which was found to form pores of 25-30 A diameter in palmitoyloleoylphosphatidylcholine (POPC) vesicles at a lipid-to-peptide ratio of 50. This result is consistent with observations on melittin pore formation in erythrocytes (Katsu, T., C. Ninomiya, M. Kuroko, H. Kobayashi, T. Hirota, and Y. Fujita 1988. Action mechanism of amphipathic peptides gramicidin S and melittin on erythrocyte membrane Biochim. Biophys. Acta. 939:57-63).     

Role of membranotropic sequences from herpes simplex virus type I glycoproteins B and H in the fusion process

The entry of enveloped viruses involves attachment followed by close apposition of the viral and plasma membranes. Then, either on the cell surface or in an endocytotic vesicle, the two membranes fuse by an energetically unfavourable process requiring the destabilisation of membrane microenvironment in order to release the viral nucleocapsid into the cytoplasm. The core fusion machinery, conserved throughout the herpesvirus family, involves glycoprotein B (gB) and the non-covalently associated complex of glycoproteins H and L (gH/gL). Both gB and gH possess several hydrophobic domains necessary for efficient induction of fusion, and synthetic peptides corresponding to these regions are able to associate to membranes and induce fusion of artificial liposomes. Here, we describe the first application of surface plasmon resonance (SPR) to the study of the interaction of viral membranotropic peptides with model membranes in order to enhance our molecular understanding of the mechanism of membrane fusion. SPR spectroscopy data are supported by tryptophan fluorescence, circular dichroism and electron spin resonance spectroscopy (ESR). We selected peptides from gB and gH and also analysed the behaviour of HIV gp41 fusion peptide and the cationic antimicrobial peptide melittin. The combined results of SPR and ESR showed a marked difference between the mode of action of the HSV peptides and the HIV fusion peptide compared to melittin, suggesting that viral-derived membrane interacting peptides all act via a similar mechanism, which is substantially different from that of the non-cell selective lytic peptide melittin.     

Association of melittin with the isolated myosin light chains

Melittin is a 26-residue peptide which undergoes high-affinity calcium-dependent binding by calmodulin [Barnette, M.S., Daly, R., & Weiss, B. (1983) Biochem. Pharmacol. 32, 2929; Comte, M., Maulet, Y., & Cox, J.A. (1983) Biochem. J. 209, 269; Anderson, S.R., & Malencik, D.A. (1986) Calcium Cell Funct. 6, 1]. The results in this paper show that three different types of myosin light chain--the smooth muscle regulatory light chain, the smooth muscle essential light chain, and the skeletal muscle regulatory 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) light chain--also associate with melittin. The resulting complexes have dissociation constants ranging from 1.1 to 2.5 microM in the presence of 0.10 M NaCl and from approximately 50 to approximately 130 nM in solutions of 20 mM 3-(N-morpholino)propanesulfonic acid alone. The regulatory smooth muscle myosin light chain exhibits two equivalent melittin binding sites while each of the others displays only one. The myosin light chains evidently contain elements of structure related to the macromolecular interaction sites present in calmodulin and troponin C but not in parvalbumin. The association of melittin and other peptides with the light chains requires consideration whenever assays of the calmodulin-dependent activity of myosin light chain kinase are used to determine peptide binding by calmodulin. The binding measurements performed on the DTNB light chain and melittin necessitated derivation of the equation relating complex formation to the observed fluorescence anisotropy of a solution containing three fluorescent components. This analysis is generally applicable to equilibria involving the association of two fluorescent molecules emitting in the same wavelength range.     

Dissection of antibacterial and toxic activity of melittin: a leucine zipper motif plays a crucial role in determining its hemolytic activity but not antibacterial activity

Melittin, a naturally occurring antimicrobial peptide, exhibits strong lytic activity against both eukaryotic and prokaryotic cells. Despite a tremendous amount of work done, very little is known about the amino acid sequence, which regulates its toxic activity. With the goal of understanding the basis of toxic activity and poor cell selectivity in melittin, a leucine zipper motif has been identified. To evaluate the possible structural and functional roles of this motif, melittin and its two analogs, after substituting the heptadic leucine by alanine, were synthesized and characterized. Functional studies indicated that alanine substitution in the leucine zipper motif resulted in a drastic reduction of the hemolytic activity of melittin. However, interestingly, both the designed analogs exhibited antibacterial activity comparable to melittin. Mutations caused a significant decrease in the membrane permeability of melittin in zwitterionic but not in negatively charged lipid vesicles. Although both the analogs exhibited similar secondary structures in the presence of negatively charged lipid vesicles as melittin, they failed to adopt a significant helical structure in the presence of zwitterionic lipid vesicles. Results suggest that the substitution of heptadic leucine by alanine impaired the assembly of melittin in an aqueous environment and its localization only in zwitterionic but not in negatively charged membrane. Altogether, the results suggest the identification of a structural element in melittin, which probably plays a prominent role in regulating its toxicity but not antibacterial activity. The results indicate that cell selectivity in some antimicrobial peptides can probably be introduced by modulating their assembly in an aqueous environment.