Quantitative prediction of 3D solution shape and flexibility of nucleic acid nanostructures

DNA nanotechnology enables the programmed synthesis of intricate nanometer-scale structures for diverse applications in materials and biological science. Precise control over the 3D solution shape and mechanical flexibility of target designs is important to achieve desired functionality. Because experimental validation of designed nanostructures is time-consuming and cost-intensive, predictive physical models of nanostructure shape and flexibility have the capacity to enhance dramatically the design process. Here, we significantly extend and experimentally validate a computational modeling framework for DNA origami previously presented as CanDo [Castro,C.E., Kilchherr,F., Kim,D.-N., Shiao,E.L., Wauer,T., Wortmann,P., Bathe,M., Dietz,H. (2011) A primer to scaffolded DNA origami. Nat. Meth., 8, 221-229.]. 3D solution shape and flexibility are predicted from basepair connectivity maps now accounting for nicks in the DNA double helix, entropic elasticity of single-stranded DNA, and distant crossovers required to model wireframe structures, in addition to previous modeling (Castro,C.E., et al.) that accounted only for the canonical twist, bend and stretch stiffness of double-helical DNA domains. Systematic experimental validation of nanostructure flexibility mediated by internal crossover density probed using a 32-helix DNA bundle demonstrates for the first time that our model not only predicts the 3D solution shape of complex DNA nanostructures but also their mechanical flexibility. Thus, our model represents an important advance in the quantitative understanding of DNA-based nanostructure shape and flexibility, and we anticipate that this model will increase significantly the number and variety of synthetic nanostructures designed using nucleic acids.     

Applications of the Cartesian coordinate tensor transfer technique in the simulations of vibrational circular dichroism spectra of oligonucleotides

The application of the Cartesian coordinate tensor transfer (CCT) technique for simulations of the IR absorption and vibrational circular dichroism (VCD) spectra of relatively large nucleic acid fragments is demonstrated on several case studies. The approach is based on direct ab initio calculations of atomic tensors, determining molecular properties, for relatively small fragments, and subsequent transfer of these tensors to the larger systems in Cartesian coordinates. This procedure enables precise computations of vibrational spectra for large biomolecular systems, currently with up to several thousands of atoms. The versatile ability of the CCT methods is emphasized on the examples of VCD and IR absorption spectra calculations for B- and Z-forms of DNA, single-, double-, and triple-stranded RNA helices and DNA structures with different base content and sequences. The development and recent improvements of the methodology are followed, including utilization of the constrained normal mode optimization (NMO) strategy and combined quantum mechanics and molecular dynamics simulations. Advantages, drawbacks, and recommendations for future improvements of the CCT method as applied to nucleic acid spectra calculations are discussed.     

Formation of non-base-pairing DNA microgels using directed phase transition of amphiphilic monomers

Programmability of DNA sequences enables the formation of synthetic DNA nanostructures and their macromolecular assemblies such as DNA hydrogels. The base pair-level interaction of DNA is a foundational and powerful mechanism to build DNA structures at the nanoscale; however, its temperature sensitivity and weak interaction force remain a barrier for the facile and scalable assembly of DNA structures toward higher-order structures. We conducted this study to provide an alternative, non-base-pairing approach to connect nanoscale DNA units to yield micrometer-sized gels based on the sequential phase transition of amphiphilic unit structures. Strong electrostatic interactions between DNA nanostructures and polyelectrolyte spermines led to the formation of giant phase-separated aggregates of monomer units. Gelation could be initiated by the addition of NaCl, which weakened the electrostatic DNA-spermine interaction while attractive interactions between cholesterols created stable networks by crosslinking DNA monomers. In contrast to the conventional DNA gelation techniques, our system used solid aggregates as a precursor for DNA microgels. Therefore, in situ gelation could be achieved by depositing aggregates on the desired substrate and subsequently initiating a phase transition. Our approach can expand the utility and functionality of DNA hydrogels by using more complex nucleic acid assemblies as unit structures and combining the technique with top-down microfabrication methods.     

Modeling nucleic acids

Nucleic acids are an important class of biological macromolecules that carry out a variety of cellular roles. For many functions, naturally occurring DNA and RNA molecules need to fold into precise three-dimensional structures. Due to their self-assembling characteristics, nucleic acids have also been widely studied in the field of nanotechnology, and a diverse range of intricate three-dimensional nanostructures have been designed and synthesized. Different physical terms such as base-pairing and stacking interactions, tertiary contacts, electrostatic interactions and entropy all affect nucleic acid folding and structure. Here we review general computational approaches developed to model nucleic acid systems. We focus on four key areas of nucleic acid modeling: molecular representation, potential energy function, degrees of freedom and sampling algorithm. Appropriate choices in each of these key areas in nucleic acid modeling can effectively combine to aid interpretation of experimental data and facilitate prediction of nucleic acid structure.     

Chlorophyll binding to monomeric light-harvesting complex. A mutation analysis of chromophore-binding residues

The chromophore binding properties of the higher plant light-harvesting complex II have been studied by site-directed mutagenesis of pigment-binding residues. Mutant apoproteins were overexpressed in Escherichia coli and then refolded in vitro with purified chromophores to yield holoproteins selectively affected in chlorophyll-binding sites. Biochemical and spectroscopic characterization showed a specific loss of pigments and absorption spectral forms for each mutant, thus allowing identification of the chromophores bound to most of the binding sites. On these bases a map for the occupancy of individual sites by chlorophyll a and chlorophyll b is proposed. In some cases a single mutation led to the loss of more than one chromophore indicating that four chlorophylls and one xanthophyll could be bound by pigment-pigment interactions. Differential absorption spectroscopy allowed identification of the Q(y) transition energy level for each chlorophyll within the complex. It is shown that not only site selectivity is largely conserved between light-harvesting complex II and CP29 but also the distribution of absorption forms among different protein domains, suggesting conservation of energy transfer pathways within the protein and outward to neighbor subunits of the photosystem.     

Organizing protein-DNA hybrids as nanostructures with programmed functionalities

The structural and functional information encoded in the base sequence of nucleic acids provides a means to organize hybrid protein-DNA nanostructures with pre-designed, programmed functionality. This review discusses the activation of enzyme cascades in supramolecular DNA-protein hybrid structures, the bioelectrocatalytic activation of redox enzymes on DNA scaffolds, and the programmed positioning of enzymes on 1D, 2D and 3D DNA nanostructures. These systems provide starting points towards the design of interconnected enzyme networks. Substantial progress in the tailoring of functional protein-DNA nanostructures has been accomplished in recent years, and advances in this field warrant a comprehensive discussion. The application of these systems for the control of biocatalytic transformations, for amplified biosensing, and for the synthesis of metallic nanostructures are addressed, and future prospects for these systems are highlighted.     

DNA biosensors based on water-soluble conjugated polymers

Conjugated polymers (CPs) with large, delocalised molecular structures exhibit unique optical and electrochemical characteristics that can be used as excellent sensing elements. Recently, research on chemical and biological sensors that use water-soluble CPs as transducers has generated intense interest. Two main sensing mechanisms are used for the detection of DNA-related events, such as hybridisation, mismatch, single nucleotide polymorphism (SNP), SNP genotyping, conformational changes, and cleavage of the nucleic acids. One mechanism takes advantage of the fluorescence resonance energy transfer (FRET) between CPs and a chromophore label on the nucleic acid probes in which a series of cationic polyfluorene, polythiophene and polyarylene derivatives are frequently used. The other mechanism relies on the conformational effects of CPs, which is induced by combination of the specific targets in which cationic polythiophene derivatives are often used. The electron transfer property of CPs are always used to design high sensitive electrochemical DNA biosensors. Here we review recent progress in the development of optical and electrochemical DNA biosensors based on water-soluble CPs.     

A New Fluorescent Probe for Studies of Interactions Between Hydrophobic Oligonucleotides and Cellular Membranes

Abstract

The synthesis of a new fluorescently labeled medium-sensitive lipophilic oligonucleotide is reported. A fluorescent chalcone chromophore was introduced between the 5′ end of the nucleic acid and the fatty hydrocarbon chains. A blue shift of both absorption and emission wavelength maxima results from a transfer of the chromophore to a more hydrophobic medium or upon binding of the conjugate to unilamellar vesicles of egg phosphatidyl choline. These conjugates could be used as markers for cell uptake studies of lipophilic nucleic acid derivatives.     

Enzyme-directed positioning of nanoparticles on large DNA templates

A method to position nanoparticles onto DNA with high resolution using an enzyme-based approach is described. This provides a convenient route to assemble multiple nanoparticles (e.g., Au and CdSe) to specific positions with a high level of control and expandability to more complex assemblies. Atomic force microscopy is used to analyze the nanostructures, which have potential interest for biosensor, optical waveguide, molecular electronics, and energy transfer studies.     

A primer to scaffolded DNA origami

Molecular self-assembly with scaffolded DNA origami enables building custom-shaped nanometer-scale objects with molecular weights in the megadalton regime. Here we provide a practical guide for design and assembly of scaffolded DNA origami objects. We also introduce a computational tool for predicting the structure of DNA origami objects and provide information on the conditions under which DNA origami objects can be expected to maintain their structure.     

Recent advances in FRET: distance determination in protein-DNA complexes

Fluorescence resonance energy transfer (FRET) provides information on the distance between a donor and an acceptor dye in the range 10 to 100 A. Knowledge of the exact positions of some dyes with respect to nucleic acids now enables us to translate these data into precise structural information using molecular modeling. Advances in the preparation of dye-labeled nucleic acid molecules and in new techniques, such as the measurement of FRET in polyacrylamide gels or in vivo, will lead to an increasingly important role of FRET in structural and molecular biology.     

The cooperativity phenomena in a pigment-protein complex of light-harvesting antenna revealed by picosecond absorbance difference spectroscopy

A model of the cooperative changes in optical properties of light-harvesting bacteriochlorophyll molecules of complex B890 in response to the absorption of light quanta is proposed. According to the model, each antenna chromophore may persist in either of two optically non-excited states, R and T. The occurrence of at least one excitation per complex causes all optically non-excited chromophores of the complex to be converted from state R to state T. The theory is shown to be in good agreement with experimental ‘light curves’ (ΔAvs intensity of picosecond excitation pulse) for the ‘minor’ and ‘major’ signals of light-harvesting bacteriochlorophylls of complex B890 from Chromatium minutissimum.     

Transmembrane Location of Retinal in Purple Membrane: Fluorescence Energy Transfer in Maximally Packed Donor-Acceptor Systems

Transmembrane location of the retinal chromophore in the purple membrane of Halobacterium halobium was investigated in three different systems in which excitation energy transfer between the chromophore and external dye molecules condensed on the membrane surfaces was observed. In system ii, the energy donor was the retinal chromophore converted in situ to a fluorescent derivative. The fluorescent membranes were embedded in solid cobalt-EDTA, which served as energy acceptors. System iii was similar to system ii, except that the acceptors were tris(2,2′-bipyridyl)ruthenium(II) complex in solid form. The positively charged ruthenium complex had a radius of 0.7 nm, whereas the cobalt complex in system ii was smaller (radius ~0.4 nm) and negatively charged. System iv was stacked sheets of native purple membrane with interspersed ruthenium complex; energy transfer from the luminescent ruthenuim complex to the native retinal chromophore was observed. The energy transfer rates in these three systems, and in two additional systems already described (Kouyama, T., K. Kinosita, Jr., and A. Ikegami, 1983, J. Mol. Biol., 165:91-107), were all consistent with a location of the retinal chromophore at a depth of 1.0 ± 0.3 nm from a surface of the purple membrane. All the analyses in the present work involved an assumption that contacts between the external dye molecules and membrane surfaces were maximal; the depth values obtained cannot be underestimates. The chromophore therefore must be outside the middle one-third of the thickness, ~4.5 nm, of the purple membrane.     

Calculation of chromophore excited state energy shifts in response to molecular dynamics of pigment-protein complexes

The absorption and energy transfer properties of photosynthetic pigments are strongly influenced by their local environment or “site.” Local electrostatic fields vary in time with protein and chromophore molecular movement and thus transiently influence the excited state transition properties of individual chromophores. Site-specific information is experimentally inaccessible in many light-harvesting pigment–proteins due to multiple chromophores with overlapping spectra. Full quantum mechanical calculations of each chromophores excited state properties are too computationally demanding to efficiently calculate the changing excitation energies along a molecular dynamics trajectory in a pigment–protein complex. A simplified calculation of electrostatic interactions with each chromophores ground to excited state transition, the so-called charge density coupling (CDC) for site energy, CDC, has previously been developed to address this problem. We compared CDC to more rigorous quantum chemical calculations to determine its accuracy in computing excited state energy shifts and their fluctuations within a molecular dynamics simulation of the bacteriochlorophyll containing light-harvesting Fenna–Mathews–Olson (FMO) protein. In most cases CDC calculations differed from quantum mechanical (QM) calculations in predicting both excited state energy and its fluctuations. The discrepancies arose from the inability of CDC to account for the differing effects of charge on ground and excited state electron orbitals. Results of our study show that QM calculations are indispensible for site energy computations and the quantification of contributions from different parts of the system to the overall site energy shift. We suggest an extension of QM/MM methodology of site energy shift calculations capable of accounting for long-range electrostatic potential contributions from the whole system, including solvent and ions.     

Energy transfer among the chromophores in phycocyanins measured by picosecond kinetics.

Energy-transfer processes in the algal light-harvesting proteins, the phycocyanins, have been studied by means of picosecond absorption spectroscopy. After excitation at 530 nm, the absorption at several wavelengths in the range 480--669 nm decayed with a short time constant (picosecond) and a long time constant (greater than 1 ns). For C-phycocyanin, energy transfer from the beta to the alpha subunits is interpreted as being a likely candidate for the short time constant; the long time constant probably is the excitation lifetime of the chromophore on the alpha subunits. The time constants for energy transfer in monomers, trimers, and hexamers of C-phycocyanin extracted from a blue-green alga, Phormidium luridum, were measured as approximately 85, approximately 56, and approximately 32 ps, respectively. The corresponding time constant in the cryptomonad phycocyanin 645 from Chroomonas species was found to be less than 5 ps.     

Fluorescence resonance energy transfer from pyrene to perylene labels for nucleic acid hybridization assays under homogeneous solution conditions

We characterized the fluorescence resonance energy transfer (FRET) from pyrene (donor) to perylene (acceptor) for nucleic acid assays under homogeneous solution conditions. We used the hybridization between a target 32mer and its complementary two sequential 16mer deoxyribonucleotides whose neighboring terminals were each respectively labeled with a pyrene and a perylene residue. A transfer efficiency of ~100% was attained upon the hybridization when observing perylene fluorescence at 459 nm with 347-nm excitation of a pyrene absorption peak. The Förster distance between two dye residues was 22.3 Å (the orientation factor of 2/3). We could change the distance between the residues by inserting various numbers of nucleotides into the center of the target, thus creating a gap between the dye residues on a hybrid. Assuming that the number of inserted nucleotides is proportional to the distance between the dye residues, the energy transfer efficiency versus number of inserted nucleotides strictly obeyed the Förster theory. The mean inter-nucleotide distance of the single-stranded portion was estimated to be 2.1 Å. Comparison between the fluorescent properties of a pyrene–perylene pair with those of a widely used fluorescein–rhodamine pair showed that the pyrene–perylene FRET is suitable for hybridization assays.     

The low-energy forms of photosystem I light-harvesting complexes: spectroscopic properties and pigment-pigment interaction characteristics

In this work the spectroscopic properties of the special low-energy absorption bands of the outer antenna complexes of higher plant Photosystem I have been investigated by means of low-temperature absorption, fluorescence, and fluorescence line-narrowing experiments. It was found that the red-most absorption bands of Lhca3, Lhca4, and Lhca1-4 peak, respectively, at 704, 708, and 709 nm and are responsible for 725-, 733-, and 732-nm fluorescence emission bands. These bands are more red shifted compared to "normal" chlorophyll a (Chl a) bands present in light-harvesting complexes. The low-energy forms are characterized by a very large bandwidth (400-450 cm(-1)), which is the result of both large homogeneous and inhomogeneous broadening. The observed optical reorganization energy is untypical for Chl a and resembles more that of BChl a antenna systems. The large broadening and the changes in optical reorganization energy are explained by a mixing of an Lhca excitonic state with a charge transfer state. Such a charge transfer state can be stabilized by the polar residues around Chl 1025. It is shown that the optical reorganization energy is changing through the inhomogeneous distribution of the red-most absorption band, with the pigments contributing to the red part of the distribution showing higher values. A second red emission form in Lhca4 was detected at 705 nm and originates from a broad absorption band peaking at 690 nm. This fluorescence emission is present also in the Lhca4-N-47H mutant, which lacks the 733-nm emission band.     

Electronic spectra, excited state structures and interactions of nucleic acid bases and base assemblies: a review

A comprehensive review of recent theoretical and experimental advances in the singlet electronic transitions, excited state structures and dynamics of nucleic acid bases (NABs) and base assemblies are presented. It is well known that NABs absorb ultraviolet radiation, but the absorbed energy is efficiently dissipated in the form of ultrafast internal conversion processes believed to occur in the subpicosecond time scale and, therefore, enabling NABs highly photostable. It is not known how much evolutionary role was played in evolving these molecules and the ultimate selection by nature as genetic materials, but it is well accepted that survival-of-fittest prevails. Recently, significant efforts have been continuously paid to understand the mechanism of electronic excitation deactivation, but universally acceptable mechanism is still elusive. However, recent investigations reveal that electronic excited state geometries of DNA bases are usually nonplanar and this structural nonplanarity may facilitate nonradiative deactivation. Investigation of excited state structures is challenging and, therefore, it is not surprising that despite the impressive theoretical and computational advances, this research area is still hampered by the methodological and computational limitations. Further, stacking has significant influence on the emission properties of molecules. The 2-aminopurine, a fluorescent adenine derivative frequently used in studying DNA dynamics, shows significant attenuations in fluorescence quantum yield when incorporated in the DNA. Theoretical and computational bottlenecks limit a thorough theoretical understanding of effect of stacking interactions on the excited state dynamics of NABs. Despite these limitations the investigations of excited state properties are progressing in the right direction and our better understanding of excited state structure and dynamics of NABs and nucleic acids may help to design preventive strategy for radiation induced illness and photostable materials.     

Monitoring fluorescence of individual chromophores in peridinin-chlorophyll-protein complex using single molecule spectroscopy

Single molecule spectroscopy experiments are reported for native peridinin-chlorophyll a-protein (PCP) complexes, and three reconstituted light-harvesting systems, where an N-terminal construct of native PCP from Amphidinium carterae has been reconstituted with chlorophyll (Chl) mixtures: with Chl a, with Chl b and with both Chl a and Chl b. Using laser excitation into peridinin (Per) absorption band we take advantage of sub-picosecond energy transfer from Per to Chl that is order of magnitude faster than the Förster energy transfer between the Chl molecules to independently populate each Chl in the complex. The results indicate that reconstituted PCP complexes contain only two Chl molecules, so that they are spectroscopically equivalent to monomers of native-trimeric-PCP and do not aggregate further. Through removal of ensemble averaging we are able to observe for single reconstituted PCP complexes two clear steps in fluorescence intensity timetraces attributed to subsequent bleaching of the two Chl molecules. Importantly, the bleaching of the first Chl affects neither the energy nor the intensity of the emission of the second one. Since in strongly interacting systems Chl is a very efficient quencher of the fluorescence, this behavior implies that the two fluorescing Chls within a PCP monomer interact very weakly with each other which makes it possible to independently monitor the fluorescence of each individual chromophore in the complex. We apply this property, which distinguishes PCP from other light-harvesting systems, to measure the distribution of the energy splitting between two chemically identical Chl a molecules contained in the PCP monomer that reaches 280 cm^− 1. In agreement with this interpretation, stepwise bleaching of fluorescence is also observed for native PCP complexes, which contain six Chls. Most PCP complexes reconstituted with both Chl a and Chl b show two emission lines, whose wavelengths correspond to the fluorescence of Chl a and Chl b. This is a clear proof that these two different chromophores are present in a single PCP monomer. Single molecule fluorescence studies of PCP complexes, both native and artificially reconstituted with chlorophyll mixtures, provide new and detailed information necessary to fully understand the energy transfer in this unique light-harvesting system.     

FRETmatrix: a general methodology for the simulation and analysis of FRET in nucleic acids

Förster resonance energy transfer (FRET) is a technique commonly used to unravel the structure and conformational changes of biomolecules being vital for all living organisms. Typically, FRET is performed using dyes attached externally to nucleic acids through a linker that complicates quantitative interpretation of experiments because of dye diffusion and reorientation. Here, we report a versatile, general methodology for the simulation and analysis of FRET in nucleic acids, and demonstrate its particular power for modelling FRET between probes possessing limited diffusional and rotational freedom, such as our recently developed nucleobase analogue FRET pairs (base–base FRET). These probes are positioned inside the DNA/RNA structures as a replacement for one of the natural bases, thus, providing unique control of their position and orientation and the advantage of reporting from inside sites of interest. In demonstration studies, not requiring molecular dynamics modelling, we obtain previously inaccessible insight into the orientation and nanosecond dynamics of the bases inside double-stranded DNA, and we reconstruct high resolution 3D structures of kinked DNA. The reported methodology is accompanied by a freely available software package, FRETmatrix, for the design and analysis of FRET in nucleic acid containing systems.