Studies of reaction parameters on synthesis of Citronellyl laurate ester via immobilized Candida rugosa lipase in organic media

Immobilized Candida rugosa lipase was used for the synthesis of citronellyl laurate from citronellol and lauric acid. Screening of different types of support (Amberlite MB-1 and Celite) for immobilization of lipase and solvent (n-hexane, n-heptane, and iso-octane) and optimization of reaction conditions, such as catalyst loading, effect of substrates molar ratio and temperature, have been studied. The maximum enzyme activity was obtained at 310 K. The immobilized C. rugosa lipase onto Amberlite MB-1 support was found to be the best support with a conversion of 89% of citronellyl laurate ester in iso-octane compared to Celite 545. Deactivation of C. rugosa lipase at 313, 318 and 323 K were observed. Ordered bi bi mechanism with dead end complex of lauric acid was found to fit the initial rate data and the kinetic parameters were obtained by non-linear regression analysis.     

Media Formulation using Complex Organic Nutrients for Improved Activity,Productivity, and Yield of Candida rugosa Lipase and Esterase Enzymes

Abstract

Candida rugosa is an excellent source of multiple lipase and esterase enzymes; therefore, it is of technological importance to formulate the medium that provides high activity for each enzyme. In this work, the cultivation medium comprising complex nutrients that provided the highest activity, productivity, and yield of C. rugosa enzymes individually was formulated. Time courses of the extracellular and intracellular lipase and esterase activities of C. rugosa were represented and the role of protease in the cultivation progress was discussed. Urea, soy-peptone, yeast extract, a mixture of soy-peptone and yeast extract, cheese whey, and wheat mill bran were tested for their lipolytic and esterasic activities. Urea provided considerably higher extracellular lipase activity when compared to other nitrogen sources; however, soy-peptone provided the highest extracellular esterase activity. Hazelnut, olive, sesame, soybean, and flax seed oils affected the enzyme activities to different extents related to their fatty acid compositions. Hazelnut oil and olive oil provided the highest extracellular lipase and esterase activities, respectively, whereas sesame oil produced the highest biomass. High C₁₈ and C₁₆ ester contents of vegetable oils promoted high lipase and esterase productions, respectively. A temperature of 30°C yielded the highest extracellular and intracellular lipase and esterase activities; however, 35°C produced the highest biomass.     

Gene analysis,optimized production and property of marine lipase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> B106 associated with South China Sea sponge <Emphasis Type="Italic">Halichondria rugosa</Emphasis>

Gene cloning, optimized production and property of marine lipase from Bacillus pumilus B106 associated with South China Sea sponge Halichondria rugosa were investigated in this paper. A lipase gene with whole ORF encoding 215 amino acids was obtained by PCR, protein domain prediction suggested that the deduced lipase belongs to α/β hydrolases family. Based on single factor Seriatim-Factorial test and Plackett–Burman experimental design, the optimal medium consisted of (per l) 12.5 ml maize oil, 5.0 g beef extract, 2.0 g PO₄ ³⁻ (0.6 g KH₂PO₄, 1.4 g K₂HPO₄), 17.15 g Mg²⁺, 5.0 g yeast extract, 2.282 g CaCl₂ and 5.0 ml Tween80 with artificial sea water. Using this optimum medium, lipase activity and cell concentration were increased by 3.54- and 1.31-fold over that of the basal medium, respectively. This lipase showed tolerance to high salinity, pH and temperature. About 10–20% methanol exhibited a stimulatory effect on the lipase activity, while activity was inhibited by 30–40% methanol, 2-propanol, DMSO, and ethanol. This study provides a valuable resource for marine lipase production and extends our understanding of the possible role of sponge-associated bacteria in the biotransformation of chemical compounds for the sponge host.     

Cross-linked enzyme aggregates (CLEAs) with controlled particles: Application to Candida rugosa lipase

Aggregation agent type and concentration, lipase and glutaraldehyde concentration, and pH are able to affect the formation of cross-linked lipase. The carrier-free immobilized Candida rugosa lipase with a particle size of 40–50 μm showed higher activity than that of the lipase with other particle sizes. The carrier-free immobilized C. rugosa lipase can keep 86% original lipase activity (0.018 g g⁻¹ min⁻¹). The enantioselectivity of the carrier-free immobilized lipase (23.3) was about 1.8 times as much as that of the native lipase (13.0) in kinetic resolution of ibuprofen racemic mixture.     

Strain development for the production of D(−)-β-hydroxyisobutyric acid

Candida rugosa BR-120, which cannot catabolize D(−)-β-hydroxyisobutyric acid (D-HIBA), was developed fromCandida rugosa IFO 0750 by UV irradiationC. rugosa BR-120 could not assimilate propionic acid as a carbon source. It is presumed thatC. rugosa BR-120 lacks HIBA dehydrogenase.C. rugosa BR-120 produced D-HIBA from isobutyric acid (IBA) with a high yield about 94%, whileC. rugosa IFO 0750 did it with about 42% on 5 days batch cultivation. On 5 days fed-batch cultivation,C. rugosa BR-120 andC. rugosa IFO 0750 produced 12.45 g/L and 5.22 g/L of D-HIBA, respectively. The degradation rate of D-HIBA by the resting cell ofC. rugosa IFO 0750 was 31.95%, butC. rugosa BR-120 was 3.08% on 2 days incubation.     

Biodiesel production using a mixture of immobilizedRhizopus oryzae andCandida rugosa lipases

Biodiesel conversion from soybean oil reached a maximum of 70% at 18 h using immobilized 1,3-specificRhizopus oryzae lipase alone. Biodiesel conversion failed to reach 20% after 30 h when immobilized nonspecificCandida rugosa lipase alone was used. To increase the biodiesel production yield, a mixture of immobilized 1,3-specificR. oryzae lipase and nonspecificC. rugosa lipase was used. Using this mixture a conversion of greater than 99% at 21 h was attained. When the stability of the immobilized lipases mixture was tested, biodiesel conversion was maintained at over 80% of its original conversion after 10 cycles.     

Coconut cake – a potent substrate for the production of lipase by Candida rugosa in solid-state fermentation

Investigations were conducted with the aim of producing extracellular lipase from Candida rugosa by solid-state fermentation (SSF), using coconut oil cake (COC) as a solid substrate. To optimize production, various modifications were made to enrich the substrate by supplementing it with mineral solution, different carbon sources and several inorganic as well as organic nitrogen sources. Among them, urea (1%), peptone (3%) and maltose (5%) were found to be most suitable. Addition of olive oil (10%) encouraged lipase synthesis. The maximum lipase activity in the enriched substrate was 87.76 units per gram of dry fermented substrate [U/gds] compared to 25.81 U/gds in the raw cake at 96 h of fermentation, and growth was as high as 14.44 mg/gds of glucosamine. This was reached at 72 h in the enriched substrate. C. rugosa growth was calculated indirectly by estimating the glucosamine content in the cell wall after its hydrolysis. The enzyme yield was far better than any values reported as yet.     

Extracellular lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NRRL3; production,partial purification and properties

Four strains of Aspergillus niger were screened for lipase production. Each was cultivated on four different media differing in their contents of mineral components and sources of carbon and nitrogen. Aspergillus niger NRRL3 produced maximal activity (325U/ml) when grown in 3% peptone, 0.05% MgSO₄.7H₂O, 0.05% KCl, 0.2% K₂HPO₄ and 1% olive oil:glucose (0.5:0.5). A. niger NRRL3 lipase was partially purified by ammonium sulphate precipitation. The majority of lipase activity (48%) was located in fraction IV precipitated at 50–60% of saturation with a 18-fold enzyme purification. The optimal pH of the partial purified lipase preparation for the hydrolysis of emulsified olive oil was 7.2 and the optimum temperature was 60°C. At 70°C, the enzyme retained more than 90% of its activity. Enzyme activity was inhibited by Hg²⁺ and K⁺, whereas Ca²⁺ and Mn²⁺ greatly stimulated its activity. Additionally, the formed lipase was stored for one month without any loss in the activity.     

<Emphasis Type="Italic">Candida rugosa</Emphasis> lipase-catalyzed polyurethane degradation in aqueous medium

Candida rugosa lipase (EC 3.1.1.3) was used to degrade commercially-available solid poly(ester)urethane (Impranil) in an aqueous medium under different temperature, pH, enzyme and substrate concentrations. A mathematical model was developed and applied to represent the degradation kinetics of the solid polyurethane. Reaction optima were found to be pH 7 and 35°C. Diethylene glycol, a degradation byproduct, generation rate was measured to be 0.12 mg/l min and the activation energy was calculated as 9.121 kcal/gmol K. This information will be useful in developing bioreactors for practical applications to manage polyurethane wastes using lipase.     

Conversion of a pentane-1,3,5-triol derivative using lipases as chiral catalysts and possible function of the lid for the regulation of substrate selectivity and enantioselectivity

Abstract

The enantioselective desymmetrization of a prochiral 3-O-silyl protected pentane-1,3,5-triol derivative was achieved by lipase-catalysed hydrolysis. The lipase from B. cepacia led to 95.4% enantiomeric excess (ee)of the (R)-configured compound (R)-4 at a theoretical yield of 79% and was isolated with 98.2% ee and 27% yield. Furthermore, it was found that the ee switched from an excess of (R)-4 to an excess of (S)-4 during the course of the reaction using crude lipase from C. rugosa under the same conditions. This finding was investigated in detail and compared to the change of substrate selectivity known for the lipase from M. miehei. It is supposed that both phenomena may result from a movement of the lid.     

Isomerase activity of <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase in the optimized conversion of racemic ibuprofen to (<Emphasis Type="Italic">S</Emphasis>)-ibuprofen

The Candida rugosa lipase catalyzed Dynamic Kinetic Resolution of racemic ibuprofen methyl ester produced (S)-ibuprofen in over 90% yield within 72 h at pH 7.6. The best concentration of various buffers for these reactions ranged from 0.2 to 0.5 M. The commercial lipase was found to be acidic altering the final pH of the reaction mixtures. Dimethylformamide co-solvent maintained the reaction pH better than dimethylsulfoxide. Lower concentrations of ibuprofen methyl ester and higher stirring rates led to faster conversions. The minimal amount of lipase needed was 20 mg/mL buffer. Reaction of (R)-ibuprofen methyl ester under the optimized conditions excluding the lipase led to no racemization, indicating that the conversion of (R)-ibuprofen methyl ester to (S)-ibuprofen is catalyzed by the enzyme, thus, indicating Candida rugosa lipase possess Isomerase activity.     

Lipase-catalyzed transesterification of soybean oil for biodiesel production in <Emphasis Type="Italic">tert</Emphasis>-amyl alcohol

Lipase-catalyzed transesterification of soybean oil and methanol for biodiesel production in tert-amyl alcohol was investigated. The effects of different organic medium, molar ratio of substrate, reaction temperature, agitation speed, lipase dosage and water content on the total conversion were systematically analyzed. Under the optimal conditions identified (6 mL tert-amyl alcohol, three molar ratio of methanol to oil, 2% Novozym 435 lipase based on the soybean oil weight, temperature 40°C, 2% water content based on soybean oil weight, 150 rpm and 15 h), the highest biodiesel conversion yield of 97% was obtained. With tert-amyl alcohol as the reaction medium, the negative effects caused by excessive molar ratio of methanol to oil and the by-product glycerol could be reduced. Furthermore, there was no evident loss in the lipase activity even after being repeatedly used for more than 150 runs.     

Immobilization of Candida rugosa lipase on sporopollenin from Lycopodium clavatum

Sporopollenin is a natural polymer obtained from Lycopodium clavatum, which is highly stable with constant chemical structure and has high resistant capacity to chemical attack. In this study, immobilization of lipase from Candida rugosa (CRL) on sporopollenin by adsorption method is reported for the first time. Besides this, the enzyme adsorption capacity, activity and thermal stability of immobilized enzyme have also been investigated. It has been observed that under the optimum conditions (Spo-E_(0.3)), the specific activity of the immobilized lipase on the sporopollenin by adsorption was 16.3 U/mg protein, which is 0.46 times less than that of the free lipase (35.6 U/mg protein). The pH and temperature of immobilized enzyme were optimized, which were 6.0 and 40 °C respectively. Kinetic parameters V_max and K_m were also determined for the immobilized lipase. It was observed that there is an increase of the K_m value (7.54 mM) and a decrease of the V_max value (145.0 U/mg-protein) comparing with that of the free lipase.     

Production of Ricinoleic Acid from Castor Oil by Immobilised Lipases

Abstract

Porcine pancreatic lipase (PPL), Candida rugosa lipase (CRL), and Castor bean lipase (CBL) were immobilized on celite by deposition from aqueous solution by the addition of hexane. Lipolytic performance of free and immobilized lipases were compared and optimizations of lipolytic enzymatic reactions conditions were performed by free and immobilized derivatives using olive oil as substrate. Afterwards, the influence on lipolysis of castor oil of free lipases and immobilized lipase derivatives have been studied in the case of production of ricinoleic acid. All of the lipases performances were compared and enzyme derivative was selected to be very effective on the production of ricinoleic acid by lipolysis reaction. Various reaction parameters affecting the production of ricinoleic acid were investigated with selected the enzyme derivative.

The maximum ricinoleic acid yield was observed at pH 7–8, 50°C, for 3 hours of reaction period with immobilized 1,3-specific PPL on celite. The kinetic constants K_m and V_max were calculated as 1.6 × 10^?4 mM and 22.2 mM from a Lineweaver–Burk plot with the same enzyme derivative. To investigate the operational stability of the lipase, the three step lipolysis process was repeated by transferring the immobilized lipase to a substrate mixture. As a result, the percentange of conversion after usage decreased markedly.     

Hydrolysis of olive oil catalyzed by surfactant-coated<Emphasis Type="Italic">Candida rugosa</Emphasis> lipase in a hollow fiber membrane reactor

In this study, we invetigated the hydrolysis of olive oil catalyzed by a surfactant-coatedCandida rugosa lipase in a hydrophilic polyacrylonitrile hollow fiber membrane reactor and then compared the results to those using the native lipase. The organic phase was passed through the hollow inner fibers of the reactor and consisted of either the coated lipase and olive oil dissolved in isooctane or the coated lipase dissolved in pure olive oil. The aqueous phase was pumped through the outer space. After 12 h and with conditions of 30°C, 0.12 mg enzyme/mL and 0.62 M olive oil, the substrate conversion of the coated lipase reached 60%. This was twice the conversion for the same amount of native lipase that was pre-immobilized on the membrane surface. When using pure olive oil, after 12 h the substrate conversion of the coated lipase was 50%. which was 1.4 times higher than that of the native lipase.     

A thermoalkaliphilic lipase of <Emphasis Type="Italic">Geobacillus</Emphasis> sp. T1

A thermoalkaliphilic T1 lipase gene of Geobacillus sp. strain T1 was overexpressed in pGEX vector in the prokaryotic system. Removal of the signal peptide improved protein solubility and promoted the binding of GST moiety to the glutathione-Sepharose column. High-yield purification of T1 lipase was achieved through two-step affinity chromatography with a final specific activity and yield of 958.2 U/mg and 51.5%, respectively. The molecular mass of T1 lipase was determined to be approximately 43 kDa by gel filtration chromatography. T1 lipase had an optimum temperature and pH of 70°C and pH 9, respectively. It was stable up to 65°C with a half-life of 5 h 15 min at pH 9. It was stable in the presence of 1 mM metal ions Na⁺, Ca²⁺, Mn²⁺, K⁺ and Mg²⁺ , but inhibited by Cu²⁺, Fe³⁺ and Zn²⁺. Tween 80 significantly enhanced T1 lipase activity. T1 lipase was active towards medium to long chain triacylglycerols (C10–C14) and various natural oils with a marked preference for trilaurin (C12) (triacylglycerol) and sunflower oil (natural oil). Serine and aspartate residues were involved in catalysis, as its activity was strongly inhibited by 5 mM PMSF and 1 mM Pepstatin. The T _m for T1 lipase was around 72.2°C, as revealed by denatured protein analysis of CD spectra.     

High lipase production by Candida rugosa is associated with G1 cells. A flow cytometry study

Growth of C. rugosa on three different culture media was analysed by laser flow cytometry to evaluate physiological growth conditions allowing effective lipase production. The highest productivity was associated with an increased proportion of cells in the G1 phase and was independent of the effect of the medium on lipase formation.     

Efficient microbial elimination of methanol inhibition for Naproxen resolution by a lipase

To eliminate methanol inhibition of the activity of a lipase, methanotrophic bacteria, which can convert methanol into water and CO₂, were introduced to the reaction of enantioselective hydrolysis of Naproxen methyl ester catalysed by lipase from Candida rugosa. Both the activity and stability of lipase were improved by the removal of methanol by the bacteria.     

Magnetic nanoparticles supported ionic liquids for lipase immobilization: Enzyme activity in catalyzing esterification

Candida rugosa lipase was immobilized on magnetic nanoparticles supported ionic liquids having different cation chain length (C₁, C₄ and C₈) and anions (Cl⁻, BF₄⁻ and PF₆⁻). Magnetic nanoparticles supported ionic liquids were obtained by covalent bonding of ionic liquids–silane on magnetic silica nanoparticles. The particles are superparamagnetic with diameter of about 55 nm. Large amount of lipase (63.89 mg/(100 mg carrier)) was loaded on the support through ionic adsorption. Activity of the immobilized lipase was examined by the catalysis of esterification between oleic acid and butanol. The activity of bound lipase was 118.3% compared to that of the native lipase. Immobilized lipase maintained 60% of its initial activity even when the temperature was up to 80 °C. In addition, immobilized lipase retained 60% of its initial activity after 8 repeated batches reaction, while no activity was detected after 6 cycles for the free enzyme.     

Synthesis of calix[n]arene-based silica polymers for lipase immobilization

The objective of this study was to prepare new calix[n]arene-based silica polymers for immobilization of Candida rugosa lipase. The amino functionalized calix[4]arene (C4P), calix[6]arene (C6P) and calix[8]arene (C8P)-based silica polymers were used for the covalent attachment of C. rugosa lipase using glutaraldehyde as a coupling agent. The characterization of synthesized CnP polymers and immobilized lipases were made by Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and scanning electron microscope (SEM) techniques. The hydrolytic activities of immobilized lipases (CnP-L) were evaluated and compared with the free enzyme. The activity recovery of immobilized CRL (C. rugosa lipase) based on the carrier C4P, C6P and C8P reaches 74.6%, 68.5% and 51.4%, respectively. The optimal pH and temperature region of the immobilized lipases for the hydrolysis of p-NPP were 7.0 and 50 °C. Nevertheless, the immobilized lipase has good stability, adaptability and reusability in comparison with the free enzyme.