A novel IS-like element frequently inserted in a putative virulence regulator in bovine mastitis isolates of Streptococcus dysgalactiae

Streptococcus dysgalactiae, a Lancefield group C streptococcus, is commonly isolated from bovine mastitis. We recently identified a putative regulon in two S. dysgalactiae strains, 8215 and Epi9, consisting of two consecutive genes, dmg and dem, coding for a possible regulatory protein and an M-like protein with fibrinogen- and IgG-binding-properties, respectively. During these studies a short sequence homologous to an IS element was found to be inserted in the dmg gene of strain 8215. The present investigation describes the complete sequence of this IS-like element, named ISSdy1, which consists of 1218 bp and contains two ORFs, flanked by imperfect repeats. The nucleotide sequence of the IS-like element shows 82% identity to the previously reported sequence of IS199 from Streptococcus mutans V403. The deduced amino acid sequences of the ORFs also revealed high homology to transposases from IS elements in Enterococcus faecium, Escherichia coli, and Shigella dysenteriae, all belonging to the IS3 family. We studied the distribution of ISSdy1 in 57 S. dysgalactiae isolates using PCR analysis with specific primers derived from the IS element. Ninety-eight percent of the isolates contained the ISSdy1 element. Surprisingly, in the majority of studied strains a copy of the IS-like element was found to be inserted in the dmg gene, a putative virulence regulator.     

Transposable Element ISHp608 of Helicobacter pylori: Nonrandom Geographic Distribution, Functional Organization, and Insertion Specificity

A new member of the IS605 transposable element family, designated ISHp608, was found by subtractive hybridization in Helicobacter pylori. Like the three other insertion sequences (ISs) known in this gastric pathogen, it contains two open reading frames (orfA and orfB), each related to putative transposase genes of simpler (one-gene) elements in other prokaryotes; orfB is also related to the Salmonella virulence gene gipA. PCR and hybridization tests showed that ISHp608 is nonrandomly distributed geographically: it was found in 21% of 194 European and African strains, 14% of 175 Bengali strains, 43% of 131 strains from native Peruvians and Alaska natives, but just 1% of 223 East Asian strains. ISHp608 also seemed more abundant in Peruvian gastric cancer strains than gastritis strains (9 of 14 versus 15 of 45, respectively; P = 0.04). Two ISHp608 types differing by approximately 11% in DNA sequence were identified: one was widely distributed geographically, and the other was found only in Peruvian and Alaskan strains. Isolates of a given type differed by < or = 2% in DNA sequence, but several recombinant elements were also found. ISHp608 marked with a resistance gene was found to (i) transpose in Escherichia coli; (ii) generate simple insertions during transposition, not cointegrates; (iii) insert downstream of the motif 5"-TTAC without duplicating target sequences; and (iv) require orfA but not orfB for its transposition. ISHp608 represents a widespread family of novel chimeric mobile DNA elements whose further analysis should provide new insights into transposition mechanisms and into microbial population genetic structure and genome evolution.     

IS2 insertion is a major cause of spontaneous mutagenesis of the bacteriophage P1: non-random distribution of target sites

Insertion mutations arising spontaneously in the P1 prophage and affecting vegetative phage reproduction were screened for the presence of insertion sequence 2 (IS2). Filter hybridization identified 28 out of 44 independent insertions as IS2. Their target specificity is not random. A region that amounts to < 2% of the phage genome had trapped 15 of the 28 IS2 elements. However, precise mapping of nine mutants in this hot spot segment revealed no preferred insertion site. Rather, the nine IS2 are distributed over the whole target segment and IS2 are found in both orientations. Sequence data indicate that at least two sequence variants of IS2 participated in mutagenesis of the phage genome. The detectable transposition of IS2 from the host chromosome to the prophage occurs with a frequency of 3 x 10(-5) per cell per generation under the particular experimental conditions. It is concluded that IS2, a natural resident of Escherichia coli K12 strains, is an important agent for spontaneous mutagenesis and exerts this action non-randomly along the genome.     

Identification of a novel insertion sequence element in Streptococcus agalactiae. bspeller@imib.rwth-aachen.de

Gain and loss of bacterial pathogenicity is often associated with mobile genetic elements. A novel insertion sequence (IS) element designated ISSa4 was identified in Streptococcus agalactiae (group B streptococci). The 963bp IS element is flanked by 25bp perfect inverted repeats and led to the duplication of a 9bp target sequence at the insertion site. ISSa4 contains one open reading frame coding for a putative transposase of 287 aa and exhibits closest similarities to insertion elements of the IS982 family which has previously not been identified in streptococci. Analysis of different S. agalactiae strains showed that the copy number of ISSa4 in S. agalactiae varies significantly between strains. The S. agalactiae strain with the highest copy number of ISSa4 was nonhemolytic and harbored one copy inserted in cylB, which encodes the membrane-spanning domain of the putative hemolysin transporter (Spellerberg et al., 1999. Identification of genetic determinants for the hemolytic activity of Streptococcus agalactiae by ISS1 transposition. J. Bacteriol. 181, 3212-3219). Determination of the distribution of ISSa4 in different S. agalactiae strains revealed that ISSa4 could be detected only in strains isolated after 1996, which might indicate a recent acquisition of this novel insertion element by S. agalactiae.     

Cloning of insertion sequence IS1485 from Enterococcus species.

We have cloned and identified an insertion sequence, IS1485, that was present in several members of the genus Enterococcus. IS1485 exists in varying copy numbers with at least 12 copies in E. durans (ATCC 11576), 3 copies in E. faecium (ATCC 19434), and one copy each in E. faecalis (ATCC 19433) and E. avium (ATCC 14024). It was also detected in clinical strains of E. gallinarum, E. casseliflavus, and E. saccharolyticus. IS1485 is 1366 bp in length, it has imperfect terminal inverted repeats with 25 of the terminal 39 residues matched, and it contains three open reading frames exceeding 50 codons, designated orfA, orfB, and orfC. The largest, orfB, was located 36 bp downstream and in the -1 reading frame relative to orfA; orfC is oriented in the opposite direction and overlaps orfA. The genetic organization of IS1485 resembles that of members of the IS3 family of transposable elements. Sequence homology exists with several members of the IS3 family especially with IS199 from Streptococcus mutans.     

Transposition of the heat-stable toxin astA gene into a gifsy-2-related prophage of Salmonella enterica serovar Abortusovis

The horizontal transfer and acquisition of virulence genes via mobile genetic elements have been a major driving force in the evolution of Salmonella pathogenicity. Serovars of Salmonella enterica carry variable assortments of phage-encoded virulence genes, suggesting that temperate phages play a pivotal role in this process. Epidemic isolates of S. enterica serovar Typhimurium are consistently lysogenic for two lambdoid phages, Gifsy-1 and Gifsy-2, carrying known virulence genes. Other serovars of S. enterica, including serovars Dublin, Gallinarum, Enteritidis, and Hadar, carry distinct prophages with similarity to the Gifsy phages. In this study, we analyzed Gifsy-related loci from S. enterica serovar Abortusovis, a pathogen associated exclusively with ovine infection. A cryptic prophage, closely related to serovar Typhimurium phage Gifsy-2, was identified. This element, named Gifsy-2AO, was shown to contribute to serovar Abortusovis systemic infection in lambs. Sequence analysis of the prophage b region showed a large deletion which covers genes encoding phage tail fiber proteins and putative virulence factors, including type III secreted effector protein SseI (GtgB, SrfH). This deletion was identified in most of the serovar Abortusovis isolates tested and might be dependent on the replicative transposition of an adjacent insertion sequence, IS1414, previously identified in pathogenic Escherichia coli strains. IS1414 encodes heat-stable toxin EAST1 (astA) and showed multiple genomic copies in isolates of serovar Abortusovis. To our knowledge, this is the first evidence of intergeneric transfer of virulence genes via insertion sequence elements in Salmonella. The acquisition of IS1414 (EAST1) and its frequent transposition within the chromosome might improve the fitness of serovar Abortusovis within its narrow ecological niche.     

Evolutionary dynamics of insertion sequences in Helicobacter pylori

Prokaryotic insertion sequence (IS) elements behave like parasites in terms of their ability to invade and proliferate in microbial gene pools and like symbionts when they coevolve with their bacterial hosts. Here we investigated the evolutionary history of IS605 and IS607 of Helicobacter pylori, a genetically diverse gastric pathogen. These elements contain unrelated transposase genes (orfA) and also a homolog of the Salmonella virulence gene gipA (orfB). A total of 488 East Asian, Indian, Peruvian, and Spanish isolates were screened, and 18 and 14% of them harbored IS605 and IS607, respectively. IS605 nucleotide sequence analysis (n = 42) revealed geographic subdivisions similar to those of H. pylori; the geographic subdivision was blurred, however, due in part to homologous recombination, as indicated by split decomposition and homoplasy tests (homoplasy ratio, 0.56). In contrast, the IS607 populations (n = 44) showed strong geographic subdivisions with less homologous recombination (homoplasy ratio, 0.2). Diversifying selection (ratio of nonsynonymous change to synonymous change, >1) was evident in approximately 15% of the IS605 orfA codons analyzed but not in the IS607 orfA codons. Diversifying selection was also evident in approximately 2% of the IS605 orfB and approximately 10% of the IS607 orfB codons analyzed. We suggest that the evolution of these elements reflects selection for optimal transposition activity in the case of IS605 orfA and for interactions between the OrfB proteins and other cellular constituents that potentially contribute to bacterial fitness. Taken together, similarities in IS elements and H. pylori population genetic structures and evidence of adaptive evolution in IS elements suggest that there is coevolution between these elements and their bacterial hosts.     

High-temperature-induced transposition of insertion elements in burkholderia multivorans ATCC 17616

An efficient and quantitative method to analyze the transposition of various insertion sequence (IS) elements in Burkholderia multivorans ATCC 17616 was devised. pGEN500, a plasmid carrying a Bacillus subtilis-derived sacB gene, was introduced into ATCC 17616 cells, and 25% of their sucrose-resistant derivatives were found to carry various IS elements on pGEN500. A PCR-based experimental protocol, in which a mixture of several specific primer pairs was used, revealed that pGEN500 captured, in addition to five previously reported IS elements (IS401, IS402, IS406, IS407, and IS408), three novel IS elements, ISBmu1, ISBmu2, and ISBmu3. The global transposition frequency of these IS elements was enhanced more than sevenfold under a high-temperature condition (42 degrees C) but not under oxidative stress or starvation conditions. To our knowledge, this is the first report demonstrating the elevated transposition activities of several IS elements at a high temperature. The efficient experimental protocol developed in this study will be useful in quantitatively and simultaneously investigating various IS elements, as well as in capturing novel functional mobile elements from a wide variety of bacteria.     

The IS1 elements in Shigella boydii: horizontal transfer,vertical inactivation and target duplication

IS1(SB) and its two variants were identified as the major and minor IS1 elements in Shigella boydii. The nucleotide sequences of IS1(SB), IS1(O157:H7) from Escherichia coli O157:H7 and IS1F from E. coli K12 suggest that these IS1 elements had been horizontally transferred among S. boydii and E. coli O157:H7 and K12. The two IS1(SB) variants and IS1(O157:H7) have transposition activities 7- to 86-fold less than that of IS1(SB), whereas IS1F has little transposition activity. Analysis of the flanking sequences of IS1(SB) and its two variants in S. boydii revealed the nature of regional specificity of the target sites and the sequence dependence of 8 and 9 bp target duplications, for which a model is presented.     

A broad-host-range plasmid for isolating mobile genetic elements in gram-negative bacteria

Plasmid pGBG1 was constructed to isolate mobile genetic elements in a wide variety of gram-negative bacteria. The mutation target, carried on a broad-host-range vector, allows positive selection for tetracycline resistance. In tests using several gram-negative bacteria we could detect transposition events of either insertion sequences or transposons. A new insertion sequence (IS) element was identified in Ralstonia eutropha.     

Novel insertion sequence IS1380 from Acetobacter pasteurianus is involved in loss of ethanol-oxidizing ability.

Acetobacter pasteurianus NCI1380, a thermophilic strain isolated from the surface culture of acetic acid fermentation, showed genetic instability to produce at high frequency spontaneous mutants which were deficient in ethanol oxidation because of the loss of alcohol dehydrogenase activity. Southern hybridization experiments with the cloned alcohol dehydrogenase-cytochrome c gene cluster as the probe showed insertion of an unknown DNA fragment into a specific position in the cytochrome c gene in most of the mutant strains. Cloning and sequencing analyses revealed that the inserted sequence was 1,665 bp in length and had a terminal inverted repeat of 15 bp. In addition, this inserted sequence was found to generate a 4-bp duplication at the inserted site upon transposition. The target site specificity was not very strict, but a TCGA sequence appeared to be preferentially used. The inserted sequence contains two long open reading frames of 461 and 222 amino acids which are overlapped and encoded by different strands. Although these open reading frames showed no homology to any protein registered in the DNA data bases, the longer open reading frame contained many basic amino acids (87 of 461), as was observed with transposases of so-called insertion sequence (IS) elements. All of these characteristics are typical of IS elements, and the sequence was named IS1380. The copy number of IS1380 in a cell of A. pasteurianus NCI1380 was estimated to be about 100. Several strains of acetic acid bacteria also contained IS1380 at high copy numbers. These results suggest that IS1380 is associated with the genetic loss of ethanol-oxidizing ability as well as the genetic instability of acetic acid bacteria in general.     

Frequency of IS1-mediated molecular events in different members of the family Enterobacteriaceae.

The numbers of chromosomal copies of the insertion sequence IS1 in strains of Salmonella typhimurium (0 to 8 copies), Shigella sonnei (56 copies), and Shigella flexneri (41 copies) isolated in Mexico City, Mexico, were similar to those reported for these genera isolated in other countries. Of the 11 Shigella strains studied, all carried several small plasmids; however, in only one of these strains did a small plasmid contain IS1, IS1 recombination, cointegrate formation mediated by IS1 or by the IS1-flanked transposon Tn9, and transposition of Tn9 occurred at a higher frequency in S. typhimurium than in either Escherichia coli or S. sonnei strains. The frequencies of IS1 recombination in S. typhimurium strains containing either zero or eight copies of IS1 were similar.     

Multiple copies of IS10 in the Enterobacter cloacae MD36 chromosome.

Repetitive sequences were isolated and characterized as double-stranded DNA fragments by treatment with S1 nuclease after denaturation and renaturation of the total DNA of Enterobacter cloacae MD36. One repetitive sequence was identical to the nucleotide sequence of IS10-right (IS10R), which is the active element in the plasmid-associated transposon Tn10. Unexpectedly, 15 copies of IS10R were found in the chromosomal DNA of E. cloacae MD36. One copy of the central region of Tn10 was found in the total DNA of E. cloacae MD36. IS10Rs in restriction fragments isolated from the E. cloacae MD36 total DNA showed 9-bp duplications adjacent to the terminal sequences that are characteristic of Tn10 transposition. This result suggests that many copies of IS10R in E. cloacae MD36 are due to transposition of IS10R alone, not due to transposition of Tn10 or to DNA rearrangement. I also found nine copies of IS10 in Shigella sonnei HH109, two and four copies in two different natural isolates of Escherichia coli, and two copies in E. coli K-12 strain JM109 from the 60 bacterial strains that were examined. All dam sites in the IS10s in E. cloacae MD36 and S. sonnei HH109 were methylated. Tn10 and IS10 transpose by a mechanism in which the element is excised from the donor site and inserted into the new target site without significant replication of the transposing segment; thus, the copy numbers of the elements in the cell are thought to be unchanged in most circumstances. Accumulation of IS10 copies in E. cloacae MD36 has interesting evolutionary implications.     

IS200: a Salmonella-specific insertion sequence

A new IS element (IS200) has been identified in Salmonella. The sequence was identified as an IS element by the following criteria: its insertion caused the mutation hisD984; six copies of the sequence are present in strain LT2 of S. typhimurium; and transposition of the sequence has been observed on several occasions. IS200 is found in almost all Salmonella species examined but is absent from most other enteric bacteria. The specificity of this element for Salmonella (and the absence of IS1-IS4 from Salmonella) suggest that transfer of insertion sequences between bacterial groups may be less extensive than is commonly believed. Alternatively, the distribution may suggest that these elements play a selectively important role in bacteria.     

Application of in vitro mutagenesis to identify the gene responsible for cold agglutination phenotype of Streptococcus mutans

A previously unidentified protein with an apparent molecular mass of 120 kDa was detected in some Streptococcus mutans strains including the natural isolate strain Z1. This protein was likely involved in the cold-agglutination of the strain, since a correlation between this phenotype and expression of the 120 kDa protein was found. We have applied random mutagenesis by in vitro transposition with the Himar1 minitransposon and isolated three cold-agglutination-negative mutants of this strain from approximately 2,000 mutants screened. A 2.5 kb chromosomal fragment flanking the minitransposon in one of the three mutants was amplified by PCR-based chromosome walking and the minitransposon insertion in the other two mutants occurred also within the same region. Nucleotide sequencing of the region revealed a 1617 nt open reading frame specifying a putative protein of 538 amino acid residues with a calculated molecular weight of 57,192. The deduced eight amino acid sequence following a putative signal sequence completely coincided with the N-terminal octapeptide sequence of the 120 kDa protein determined by the Edman degradation. Therefore, the 1617 nt gene unexpectedly encoded the 120 kDa protein from S. mutans. Interestingly, this gene encoded a collagen adhesin homologue. In vitro mutagenesis using the Himar1 minitransposon was successfully applied to S. mutans.     

Characterization of an insertion sequence element associated with genetically diverse plant pathogenic Streptomyces spp

Streptomycetes are common soil inhabitants, yet few described species are plant pathogens. While the pathogenicity mechanisms remain unclear, previous work identified a gene, nec1, which encodes a putative pathogenicity or virulence factor. nec1 and a neighboring transposase pseudogene, ORFtnp, are conserved among unrelated plant pathogens and absent from nonpathogens. The atypical GC content of nec1 suggests that it was acquired through horizontal transfer events. Our investigation of the genetic organization of regions adjacent to the 3' end of nec1 in Streptomyces scabies 84.34 identified a new insertion sequence (IS) element, IS1629, with homology to other IS elements from prokaryotic animal pathogens. IS1629 is 1,462 bp with 26-bp terminal inverted repeats and encodes a putative 431-amino-acid (aa) transposase. Transposition of IS1629 generates a 10-bp target site duplication. A 77-nucleotide (nt) sequence encompassing the start codon and upstream region of the transposase was identified which could function in the posttranscritpional regulation of transposase synthesis. A functional copy of IS1629 from S. turgidiscabies 94.09 (Hi-C-13) was selected in the transposon trap pCZA126, through its insertion into the lambda cI857 repressor. IS1629 is present in multiple copies in some S. scabies strains and is present in all S. acidiscabies and S. turgidiscabies strains examined. A second copy of IS1629 was identified between ORFtnp and nec1 in S. acidiscabies strains. The diversity of IS1629 hybridization profiles was greatest within S. scabies. IS1629 was absent from the 27 nonpathogenic Streptomyces strains tested. The genetic organization and nucleotide sequence of the nec1-IS1629 region was conserved and identical among representatives of S. acidiscabies and S. turgidiscabies. These findings support our current model for the unidirectional transfer of the ORFtnp-nec1-IS1629 locus from IS1629-containing S. scabies (type II) to S. acidiscabies and S. turgidiscabies.     

Transposition of IS10 from the host Escherichia coli genome to a plasmid may lead to cloning artefacts

During recloning of Nicotiana tabacum L. repetitive sequence R8.3 in Escherichia coli, a modified clone that differed from the original by the insertion of an IS10 sequence was unintentionally produced. The insert was flanked by a 9-bp direct repeat derived from the R8.3 sequence, the 9-bp duplication of acceptor DNA in the site of insertion being a characteristic of IS10 transposition events. A database search using the FASTA program showed IS10 and other prokaryotic IS elements inserted into numerous eukaryotic clones. Unexpectedly, the IS10, which is not a natural component of the E. coli genome, appeared to be by far the most frequent contaminant of DNA databases among several IS sequences tested. In the GenEMBL database, the IS10 query sequence yielded positive scores with more than 500 eukaryotic clones. Insertions of shortened IS10 sequences having only one intact terminal inverted repeat were commonly found. Most full-length IS10 insertions (32 out of 40 analyzed) were flanked by 9-bp direct repeats having the consensus 5'-NPuCNN-NGPyN-3' with a strong preference for 5'-TGCTNA-GNN-3'. One insertion was flanked by an inverted repeat of more than 400 bp in length. PCR amplification and Southern analysis revealed the presence of IS10 sequences in E. coli strains commonly used for DNA cloning, including some reported to be Tn10-free. No IS10-specific PCR product was obtained with N. tabacum or human DNA. Our data suggest that transposition of IS10 elements may accompany cloning steps, particularly into large BAC vectors. This might lead to the relatively frequent contamination of DNA databases by this bacterial sequence. It is estimated that one in approximately every thousand eukaryotic clone in the databases is contaminated by IS-derived sequences. We recommend checking submitted sequences for the presence of IS10 and other IS elements. In addition, DNA databases should be corrected by removing contaminating IS sequences.