Characterization of the heterogeneous binding site affinity distributions in molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are polymers that can be tailored with affinity and selectivity for a molecule of interest. Offsetting the low cost and ease of preparation of MIPs is the presence of binding sites that vary widely in affinity and selectivity. Presented is a review of methods that take into account binding site heterogeneity when calculating the binding properties of MIPs. These include the bi-Langmuir, Freundlich, and Langmuir-Freundlich binding models. These methods yield a measure of heterogeneity in the form of binding site affinity distributions and the heterogeneity index. Recent developments have made these methods surprisingly easy to use while also yielding more accurate measures of the binding properties of MIPs. These have allowed for easier comparison and optimization of MIPs. Heterogeneous binding models have also led to a better understanding of the imprinting process and of the advantages and limitations of MIPs in chromatographic and sensor applications.     

Preparation and evaluation of a molecularly imprinted polymer for the selective recognition of testosterone--application to molecularly imprinted sorbent assays

Biomimetic testosterone receptors were synthesized via molecular imprinting for use as antibody mimics in immunoassays. As evaluated by radioligand binding assays, imprinted polymers prepared in acetonitrile were very specific for testosterone because the nonimprinted control polymers bound virtually no radiolabeled testosterone. The polymers present an appreciable affinity, with association constants of K(a) = 3.3 x 10(7) M(- 1) (high-affinity binding sites). The binding characteristics of the polymers were also evaluated in aqueous environment to study their viabilities as alternatives to antibodies in molecularly imprinted sorbent assays. Compared with the testosterone-specific antibodies present in commercial kits, our molecularly imprinted polymers are somewhat less sensitive but show a high selectivity.     

Surface plasmon resonance sensor using molecularly imprinted polymer for detection of sialic acid

A surface plasmon resonance (SPR) sensor using a molecularly imprinted polymer-coated sensor chip for the detection of sialic acid was developed. The thinly coated polymer was prepared by co-polymerizing N,N,N-trimethylaminoethyl methacrylate, 2-hydroxyethyl methacrylate and ethyleneglycol dimethacrylate in the presence of p-vinylbenzeneboronic acid ester with sialic acid. The sensor showed a selective response to ganglioside of which sialic acid is located at the non-reducing end and gave a linear relationship from 0.1 to 1.0 mg of ganglioside.     

Novel chiral recognition elements for molecularly imprinted polymer preparation

The use of a novel chiral functional monomer system in molecular imprinting protocols is described. The monomer, dibenzyl (2R,3R)-O-monoacryloyl tartrate, possesses a hydroxyl moiety which can be used to direct template-functional monomer interactions during molecular imprinting polymerization. This system simultaneously positions benzyl ester-protected carboxyl groups in close proximity to the template, which upon deprotection yield recognition sites with stronger ligand-binding capacities. Furthermore, the inherent chirality of the monomer engenders the polymer with an inbuilt preference for a given stereoisomer. Application of the system to the molecular imprinting of the cinchonidine alkaloids (+)-cinchonine and (-)-cinchonidine yielded stereoselective polymers. The effect of imprinting (+)-cinchonine produced a polymer which more than reversed the inherent chiral selectivity of the chiral monomer residues present in the matrix.     

Theoretical and computational strategies for rational molecularly imprinted polymer design

The further evolution of molecularly imprinted polymer science and technology necessitates the development of robust predictive tools capable of handling the complexity of molecular imprinting systems. A combination of the rapid growth in computer power over the past decade and significant software developments have opened new possibilities for simulating aspects of the complex molecular imprinting process. We present here a survey of the current status of the use of in silico-based approaches to aspects of molecular imprinting. Finally, we highlight areas where ongoing and future efforts should yield information critical to our understanding of the underlying mechanisms sufficient to permit the rational design of molecularly imprinted polymers.     

Computational study on acetamiprid-molecular imprinted polymer

Journal of Molecular Modeling - In semiconducting materials, lattice deformities can play the role of localizing the charge carriers. Polarons are understood as attractive interactions between...     

Synthesis and evaluation of a selective molecularly imprinted polymer for the contraceptive drug levonorgestrel

A molecularly imprinted polymer (MIP) has been prepared using levonorgestrel (LEV) as template. The polymer was synthesised in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization. An equivalent blank polymer was also synthesised in the absence of the template compound. Batch adsorption experiments were used to evaluate the binding affinity of the imprinted polymer. After packing MIP into a stainless steel column (150 mm x 4.6 mm i.d.), retention and elution of the template and related compounds were evaluated by high-performance liquid chromatography (HPLC). This LEV imprinted polymer was further applied for selective solid phase extraction (SPE) of LEV from human serum. It was confirmed that the binding ability of the prepared MIP for LEV was essentially sufficient in the presence of other compounds coexisting in serum sample. Therefore, as a selective and efficient solid phase material, LEV imprinted polymer has a high potential application in analysis of this steroidal hormone in clinical purposes.     

Synthesis and characterization of a molecularly imprinted polymer optosensor for TEXs-screening in drinking water

A molecularly imprinted polymer (MIP) was synthesized using toluene as template, and was implemented in a fluorescence optosensor (λ(exc)=260 nm, λ(em)=284 nm) for the screening of TEXs (toluene, ethylbenzene and xylenes) in drinking water. All the parameters which can affect the sensitivity and selectivity of the optical sensing phase, were carefully optimized. The screening test runs without the need for any pre-concentration step, thus rendering it suitable for routine use in water-quality-control laboratories. The test recognizes contaminated samples rapidly (81 s) and inexpensively with a cut-off level of 700 μg L(-1) ethylbenzene which corresponds with the maximum contaminant level (MCL) established by US Environmental Protection Agency (EPA) in drinking water. The threshold value of the screening test for the cut-off level was 8.27±0.57 a.u. (95% confidence level, n=10). The reliability of the screening test was 32% false positives and 0% false negatives for 50 samples, and its applicability has been demonstrated by analyzing 15 samples of mineral, tap and river waters obtaining 0% false negatives.     

A molecularly imprinted polymer on indium tin oxide and silicon

Molecular imprinting is a technique for creating artificial receptor sites in a polymer. Molecularly imprinted polymers (MIPs) are produced by forming a polymer around a molecule that is used as the template. Upon removal of the template, molecular holes remain which are specific in shape and size to the target molecule. In this research, a MIP was formed for theophylline using a copolymer of methacrylic acid and ethylene glycol dimethacrylate. The theophylline MIP was formed on two platforms: indium tin oxide (ITO) and silicon, which were used as the working electrode for cyclic voltammetry measurements. The presence of theophylline was measured using cyclic voltammetry and corresponded to the peak current on the cyclic voltammograms. The results of this research agreed with previous results of MIPs immobilized on an ITO platform. The peak currents of the MIP in the presence and absence of theophylline were compared to the blank polymer for each platform. The ratio of peak currents on ITO increased by a factor of 9.5 for the MIP compared to the non-imprinted polymer. Similarly, the ratio of peak currents on silicon increased by a factor of 6 compared to the non-imprinted polymer. This research demonstrated a procedure for evaluating a MIP layer on two different platforms.     

Retention behavior of phenoxyacetic herbicides on a molecularly imprinted polymer with phenoxyacetic acid as a dummy template molecule

Molecular imprinted polymers (MIPs) binding with phenoxyacetic acid (PA) as a dummy template molecule were synthesized via thermal initiation in aqueous medium. The retention behaviors of benzoic acid (BA), PA, 2-methyl-4-chlorophenoxyacetic acid (MCPA), 4-chlorophenoxyacetic acid (4-CPA), and 2,4-dichlorophenoxyacetic acid (2,4-D) on this MIP column indicate that this material can selectively retain phenoxyacetic herbicides. To investigate these recognition mechanisms, the interactions between the functional monomer 4-vinylpyridine (4-VP) and PA or 2,4-D were investigated by computational modeling. (1)H NMR spectroscopy of 2,4-D titrated by 4-VP was recorded. The chemical shift of the 2,4-D acidic proton (12.15-14.32ppm) shows the existence of the ion-pair interaction. This kind of polymers could be useful as stationary phases to extract 2,4-D, 4-CPA or MCPA and avoid leakage of a trace amount of target analyte remaining in the MIPs.     

Development of a quantum dot molecularly imprinted polymer sensor for fluorescence detection of atrazine

Atrazine is a common agricultural pesticide which has been reported to occur widely in surface drinking water, making it an environmental pollutant of concern. In the quest for developing sensitive detection methods for pesticides, the use of quantum dots (QDs) as sensitive fluorescence probes has gained momentum in recent years. QDs have attractive and unique optical properties whilst coupling of QDs to molecularly imprinted polymers (MIPs) has been shown to offer excellent selectivity. Thus, the development of QD@MIPs based fluorescence sensors could provide an alternative for monitoring herbicides like atrazine in water. In this work, highly fluorescent CdSeTe/ZnS QDs were fabricated using the conventional organometallic synthesis approach and were then encapsulated with MIPs. The CdSeTe/ZnS@MIP sensor was characterized and applied for selective detection of atrazine. The sensor showed a fast response time (5 min) upon interaction with atrazine and the fluorescence intensity was linearly quenched within the 2–20 mol L^?1 atrazine range. The detection limit of 0.80 × 10^?7 mol L^?1 is comparable to reported environmental levels. Lastly, the sensor was applied in real water samples and showed satisfactory recoveries (92–118%) in spiked samples, hence it is a promising candidate for use in water monitoring.     

Synthesis of a molecularly imprinted polymer for the solid‐phase extraction of betulin and betulinic acid from plane bark

Introduction – Plant extracts are usually complex mixtures of various polarity compounds and their study often includes a purification step, such as solid‐phase extraction (SPE), to isolate interest compounds prior analytical investigations. Molecularly imprinted polymers (MIPs) are a new promising type of SPE material which offer tailor‐made selectivity for the extraction of trace active components in complex matrices. Numerous specific cavities that are sterically and chemically complementary of the target molecules, are formed in imprinted polymers. A molecularly imprinted polymer (MIP) was synthesised in order to trap a specific class of triterpene, including betulin and betulinic acid from a methanolic extract of plane bark. Methodology – Imprinted polymers were synthesised by thermal polymerisation of betulin as template, methacrylic acid (MAA) or acrylamide (AA) as functional monomer, ethylene glycol dimethacrylate as crosslinking agent and chloroform as porogen. Afterwards, MAA‐ and AA‐MIPs were compared with their non‐imprinted polymers (NIPs) in order to assess the selectivity vs betulin and its derivatives. Recovered triterpenes were analysed by HPLC during MIP‐SPE protocol. Results – After SPE optimisation, the MAA‐imprinted polymer exhibited highest selectivity and recovery (better than 70%) for betulin and best affinity for its structural analogues. Thus, a selective washing step (chloroform, acetonitrile) removed unwanted matrix compounds (fatty acids) from the SPE cartridge. The elution solvent was methanol. Finally, the MAA‐MIP was applied to fractionate a plane bark methanolic extract containing betulin and betulinic acid. Conclusion – This study demonstrated the possibility of direct extraction of betulin and its structural analogues from plant extracts by MIP technology. Copyright © 2009 John Wiley & Sons, Ltd.     

Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c

A newly designed molecularly imprinted polymer (MIP) material was fabricated and successfully utilized as recognition element to develop a quantum dots (QDs) based MIP-coated composite for selective recognition of the template cytochrome c (Cyt). The composites were synthesized by sol-gel reaction (imprinting process). The imprinting process resulted in an increased affinity of the composites toward the corresponding template. The fluorescence of MIP-coated QDs was stronger quenched by the template versus that of non-imprinted polymer (NIP)-coated QDs, which indicated the composites could recognize the corresponding template. The results of specific experiments further exhibited the recognition ability of the composites. Under optimum conditions, the linear range for Cyt is from 0.97 μM to 24 μM, and the detection limit is 0.41 μM. The new composites integrated the high selectivity of molecular imprinting technology and fluorescence property of QDs and could convert the specific interactions between imprinted cavities and corresponding template to the obvious changes of fluorescence signal. Therefore, a simple and selective sensing system for protein recognition has been realized.     

Removal of the fermentation by-product succinyl L-tyrosine from the beta-lactamase inhibitor clavulanic acid using a molecularly imprinted polymer

Clavulanic acid is a beta-lactamase inhibitor used in therapeutic combinations with the penicillin-type antibiotics. During the fermentation leading to clavulanic acid, a succinyl L-tyrosine by-product is unavoidably formed. Occasionally, the amount of this by-product is found to be as high as 2% of the product even after standard purification operations. To further remove this impurity, we prepared a highly specific adsorbent for succinyl L-tyrosine with the molecular imprinting technique. This was performed by simultaneously using vinylbenzyl trimethylammonium chloride and methacrylic acid as the functional monomers. The imprinted polymer selectively bound succinyl L-tyrosine, and could be successfully used to remove this impurity at concentrations of less than 2% in the presence of clavulanic acid.     

Characterization of molecularly imprinted polymer nanoparticles by photon correlation spectroscopy

We follow template‐binding induced aggregation of nanoparticles enantioselectively imprinted against (S)‐propranolol, and the non‐imprinted ones, using photon correlation spectroscopy (dynamic light scattering). The method requires no separation steps. We have characterized binding of (R,S)‐propranolol to the imprinted polymers and determined the degree of non‐specificity by comparing the specific binding with the results obtained using non‐imprinted nanoparticles. Using (S)‐propranolol as a template for binding to (S)‐imprinted nanoparticle, and (R)‐propranolol as a non‐specific control, we have determined range of concentrations where chiral recognition can be observed. By studying aggregation induced by three analytes related to propranolol, atenolol, betaxolol, and 1‐amino‐3‐(naphthalen‐1‐yloxy)propan‐2‐ol, we were able to determine which parts of the template are involved in the specific binding, discuss several details of specific adsorption, and the structure of the imprinted site. Copyright © 2014 John Wiley & Sons, Ltd.     

Voltammetric sensor for vanillylmandelic acid based on molecularly imprinted polymer-modified electrodes

Despite the increasing number of applications of molecularly imprinted polymers (MIPs) in analytical chemistry, the construction of a biomimetic voltammetric sensor remains still challenging. This work investigates the development of a voltammetric sensor for vanillylmandelic acid (VMA) based on acrylic MIP-modified electrodes. Thin layers of MIPs for VMA have been prepared by spin coating the surface of a glassy carbon electrode with the monomers mixture (template, methacrylic acid, a cross-linking agent and solvent), followed by in situ photopolymerisation. After extraction of the template molecule, the peak current recorded with the imprinted sensor after rebinding was linear with VMA concentration in the range 19-350 microg ml(-1), whereas the response of the control electrode is independent of incubation concentration, and was about one-tenth of the value recorded with the imprinted sensor at the maximum concentration tested. Under the conditions used, the sensor is able to differentiate between VMA and other closely structural-related compounds, such as 3-methoxy-4-hydroxyphenylethylene glycol (not detected), or 3,4- and 2,5-dihydroxyphenilacetic acids, which are adsorbed on the bare electrode surface but not at the polymer layer. Homovanillic acid was detected with the imprinted sensors after incubation, indicating that the presence of both methoxy and carboxylic groups in the same position as in VMA is necessary for effective binding in the imprinted sites. Nevertheless, both species can be differentiated by the oxidation potential. It can be concluded that MIP-based voltammetric electrodes are very promising analytical tool for the development of highly selective analytical sensors.     

A surface acoustic wave sensor functionalized with a polypyrrole molecularly imprinted polymer for selective dopamine detection

A surface acoustic wave sensor operating at 104 MHz and functionalized with a polypyrrole molecularly imprinted polymer has been designed for selective detection of dopamine (DA). Optimization of pyrrole/DA ratio, polymerization and immersion times permitted to obtain a highly selective sensor, which has a sensitivity of 0.55°/mM (≈550 Hz/mM) and a detection limit of ≈ 10 nM. Morphology and related roughness parameters of molecularly imprinted polymer surfaces, before and after extraction of DA, as well as that of the non imprinted polymer were characterized by atomic force microscopy. The developed chemosensor selectively recognized dopamine over the structurally similar compound 4‐hydroxyphenethylamine (referred as tyramine), or ascorbic acid,which co‐exists with DA in body fluids at a much higher concentration. Selectivity tests were also carried out with dihydroxybenzene, for which an unexpected phase variation of order of 75% of the DA one was observed. Quantum chemical calculations, based on the density functional theory, were carried out to determine the nature of interactions between each analyte and the PPy matrix and the DA imprinted PPy polypyrrole sensing layer in order to account for the important phase variation observed during dihydroxybenzene injection. Copyright © 2015 John Wiley & Sons, Ltd.     

Anatomy of a successful imprint: analysing the recognition mechanisms of a molecularly imprinted polymer for quercetin

This study comprises a retrospective analysis of a successful molecular imprint for quercetin with the main aim of deriving rational design strategies for more effective molecularly imprinted polymers. Hence, polymers of varying composition were synthesised and chromatographically characterised to examine the effects of monomer-template ratios. (1)H NMR analysis of the pre-polymerisation mixture yielded further information on the nature of the complexes formed prior to the polymerisation step. A direct correlation between the optimum monomer-template ratio derived from the chromatographic studies and the monomer-template ratio providing the most stable pre-polymerisation complexes observed via (1)H NMR T(1) relaxation time measurements, suggests that the formation of particularly stable pre-polymerisation complexes is responsible for an increased formation of selective binding sites during the polymerisation step. Furthermore, physical aspects of the polymerisation, such as the MIP surface area and macroscopic phase partitioning of the mixture during the polymerisation are investigated. The observed effects and their analytical assessment offer insight into the mechanisms governing MIP selectivity at a molecular level.     

Theophylline molecularly imprinted polymer dissociation kinetics: a novel sustained release drug dosage mechanism

The template release kinetics of theophylline molecularly imprinted polymers has been examined with a view to determining their potential as a controlled release drug dosage form. The basis for the ligand selectivity of these polymers has been shown through the demonstration of pre-polymerization template-monomer complexation and HPLC studies of the product polymer ligand selectivities. The release kinetics shows a dependence upon template loading and pH. Small differences in release characteristics between imprinted and non-imprinted (reference) polymers have been observed.     

Validation of computational approach to study monomer selectivity toward the template Gallic acid for rational molecularly imprinted polymer design

Gallic acid (GA) is important for pharmaceutical industries as an antioxidant. It also finds use in tanning, ink dyes and manufacturing of paper. Molecularly imprinted polymers (MIP), which are tailor made materials, can play an excellent role in separation of GA from complex matrices. Molecular recognition being the most important property of MIP, the present work proposes a methodology based on density functional theory (DFT) calculations for selection of suitable functional monomer for a rational design of MIP with a high binding capacity for GA. A virtual library of 18 functional monomers was created and screened for the template GA. The prepolymerization template-monomer complexes were optimized at B3LYP/6-31G(d) model chemistry and the changes in the Gibbs free energy (ΔG) due to complex formation were determined on the optimized structures. The monomer with the highest Gibbs free energy gain forms most stable complex with the template resulting in formation of more selective binding sites in the polymeric matrix in MIPs. This can lead to high binding capacity of MIP for GA. Amongst the 18 monomers, acrylic acid (AA) and acrylamide (AAm) gave the highest value of ΔG due to complex formation with GA. 4-vinyl pyridine (4-Vp) had intermediate value of ΔG while, methyl methacrylate (MMA) gave least value of ΔG due to complex formation with GA. Based on this study, the MIPs were synthesized and rebinding performance was evaluated using Langmuir-Freundlich model. The imprinting factor for AA and AAm based MIPs were 5.28 and 4.80 respectively, 4-Vp based MIP had imprinting factor of 2.59 while MMA based MIP exhibited an imprinting factor of 1.95. The experimental results were in good agreement with the computational predictions. The experimental data validated the DFT based computational approach.