A selective and sensitive fluorescent sensor for cysteine detection based on bi‐8‐carboxamidoquinoline derivative and Cu2+ complex

In this paper, a novel fluorescent sensor 1 for selective and sensitive detection of cysteine was developed based on a complex between bi‐8‐carboxamidoquinoline derivative ligand ( L ) and Cu²⁺. The interaction of Cu²⁺ with the ligand causes a dramatic fluorescence quenching most likely due to its high affinity towards Cu²⁺ and a ligand–metal charge transfer (LMCT) process. The in situ generated L–Cu ² complex was utilized as a chemosensing ensemble for cysteine. In the presence of cysteine, the fluorophore, L , was released from L–Cu ² complex because of the strong affinity of cysteine to Cu²⁺ via the Cu–S bond, leading to the fluorescence recovery of the ligand. The proposed displacement mechanism was confirmed by the results of mass spectrometry (MS) study. Under optimized conditions, the recovered fluorescence intensity is linear with cysteine concentrations in the range 1 × 10^?6 mol/l to 8 × 10^?6 mol/l. The detection limit for cysteine is 1.92 × 10^?7 mol/l. Furthermore, the established method showed a highly sensitive and selective response to cysteine among the 20 fundamental α‐amino acids used as the building blocks of proteins, after Ni²⁺ was used as a masking agent to eliminate the interference of His. The proposed sensor is applicable in monitoring cysteine in practical samples with good recovery rate.     

Determination of amlodipine using terbium‐sensitized luminescence in the presence of europium(III) as a co‐luminescence reagent

A sensitive time‐resolved luminescence method for the determination of amlodipine (AM) in methanol and in aqueous solution is described. The method is based on the luminescence sensitization of terbium (Tb³⁺) by formation of a ternary complex with AM in the presence of tri‐n‐octylphosphine oxide (TOPO) as co‐ligand, dodecylbenzenesulfate as surfactant and europium ion as a co‐luminescence reagent. The signal for Tb–AM–TOPO is monitored at λ_ex = 242 nm and λ_em = 550 nm. Optimum conditions for the formation of the complex in aqueous system were 0.015 m Tris (hydroxylmethyl) amino methane buffer, pH 9.0, TOPO (1.0 × 10^–4 m ), Eu³⁺ (2.0 × 10^–7 m ), dodecylbenzenesulfate (0.14%) and 6.0 × 10^–5 m of Tb³⁺, which allows the determination of 10–50 ppb of AM with a limit of detection of 1.2 ppb. The relative standard deviations of the method range between 0.1 and 0.2% indicated excellent reproducibility of the method. The proposed method was successfully applied for the assay of AM in pharmaceutical formulations and in plasma samples. Average recoveries of 98.5 ± 0.2% and 95.2 ± 0.2% were obtained for AM in tablet and plasma samples respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Response surface optimized peroxyoxalate chemiluminescence of octahydro‐Schiff base derivative as new luminophor and study of the quenching effect of some cations,amino acids and cholesterol

We report the first detailed study of the characteristics of an octahydro‐Schiff base derivative as a new luminophor in the peroxyoxalate chemiluminescence (POCL) system. The effect of reagents on this new POCL system was investigated. In addition, the response surface methodology was used for evaluating the relative significance of variables in this POCL system, establishing models and determining optimal conditions. The quenching effect of some cations and compounds such as Cu²⁺, Fe³⁺, Hg²⁺, imidazole, histidine and cholesterol on an optimized POCL reaction were studied. The dynamic ranges were up to approximaterly 100 and 175 × 10^?6 M for Cu²⁺ and cholesterol respectively. The detection limits were 3.3 × 10^?6 m and 2.58 × 10^?6 m for Cu²⁺ and histidine, respectively. In all cases the relative standard deviations were 4–5% (n = 4). Copyright © 2014 John Wiley & Sons, Ltd.     

Utility of gold nanoparticles in luminescence determination of trovafloxacin: comparison of chemiluminescence and fluorescence detection

Two novel sensitive sequential injection chemiluminescence analysis and fluorescence methods for trovafloxacin mesylate detection have been developed. The methods were based on the enhancement effect of gold nanoparticles on luminol–ferricyanide–trovafloxacin and europium(III)–trovafloxacin complex systems. The optimum conditions for both detection methods were investigated. The chemiluminescence signal was emitted due to the enhanced effect of gold nanoparticles on the reaction of luminol–ferricyanide–trovafloxacin in an alkaline medium. The response was linear over a concentration range of 1.0 × 10^–9 to 1.0 × 10^–2 mol/L (%RSD = 1.3), (n = 9, r = 0.9991) with a detection limit of 1.7 × 10^–10 mol/L (S/N = 3). The weak fluorescence intensity signal of the oxidation complex of europium(III)–trovafloxacin was strongly enhanced by gold nanoparticles and detected at λ_ex = 330 and λ_em = 540 nm. Fluorescence detection enabled the determination of trovafloxacin mesylate over a linear range of 1.0 × 10^–8 to 1.0 × 10^–3 mol/L (%RSD = 1.2), (n = 6, r = 0.9993) with a detection limit of 3.3 × 10^–9 mol/L. The proposed methods were successfully applied to the determination of the studied drug in its bulk form and in pharmaceutical preparations. The results were treated statistically and compared with those obtained from other reported methods. Copyright © 2015 John Wiley & Sons, Ltd.     

Resonance light scattering technique for determination of polychlorinated biphenyls with silver nanoparticles

In this paper, a simple and novel method for the determination of polychlorinated biphenyls (PCBs), using silver nanoparticles (AgNPs) as a resonance light scattering (RLS) probe, is proposed. Under optimized conditions, there existed linear relationships between the enhancing RLS intensity of the system and the concentrations of PCBs in the range 8.0 × 10^?8?1.0 × 10^?6 g mL^?1 for 2,4,4′‐trichlorbiphenyl (PCB28), 9.0 × 10^?8?1.0 × 10^?6 g mL^?1 for 2,2′,5,5′‐tetrachlorbiphenyl (PCB52) and 4.0 × 10^?8?1.0 × 10^?6 g mL^?1 for 3,3′,4,4′‐tetrachlorobiphenyl (PCB77). The corresponding detection limits (S/N = 3) were 2.6 × 10^?8 g mL^?1 for PCB28, 3.3 × 10^?8 g mL^?1 for PCB52 and 6.3 × 10^?9 g mL^?1 for PCB77, respectively. Finally, the mechanism of RLS enhancement was also studied. The results indicated that PCBs were adsorbed on the surface of AgNPs to form larger AgNP–PCB aggregates, resulting in the RLS enhancement of the system. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow injection chemiluminescence determination of 6‐mercaptopurine based on a new system of potassium permanganate–thioacetamide–sodium hexametaphosphate

A novel chemiluminescence method for the determination of 6‐mercaptopurine was established based on 6‐mercaptopurine inhibition of the chemiluminescence emission of potassium permanganate–thioacetamide–sodium hexametaphosphate system. The peak height was proportional to log 6‐mercaptopurine concentration in the range 7.0 × 10^?10 to 1.0 × 10^?7 g/mL and the detection limit was 1.9 × 10^?11 g/mL (S/N = 3). The relative standard deviation was 1.5% for the determination of 8.0 × 10^?8 g/mL 6‐mercaptopurine (n = 11). The proposed sensor was successfully applied to the analysis of 6‐mercaptopurine in human serum samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Rapid determination of gatifloxacin in biological samples and pharmaceutical products using europium‐sensitized fluorescence spectrophotometry

A europium‐sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of gatifloxacin (GFLX). The GFLX–Eu³⁺–SDBS system was studied and it was found that SDBS significantly enhanced the fluorescence intensity of the GFLX–Eu³⁺ complex (about 25‐fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 338 and 617 nm, pH 7.5, 3.0 × 10^–6 mol/L europium(III), and 5.0 × 10^–5 mol/L SDBS. The enhanced fluorescence intensity of the system (ΔI_f) showed a good linear relationship with the concentration of GFLX over the range 1.0 × 10^–8–8.0 × 10^–7 mol/L with a correlation coefficient of 0.9990. The detection limit (S:N = 3) was determined as 1.0 × 10^–9 mol/L. This method has been successfully applied for the determination of GFLX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range and good stability. The luminescence mechanism of the system is also discussed in detail. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of trace amounts of dopamine by flow‐injection analysis coupled with luminol–Ag(III) complex chemiluminescence detection

A novel flow injection analysis‐direct chemiluminescence (FI‐CL) method has been developed for determination of trace amounts of dopamine (DA) based on the enhancing effect of DA on the CL reaction of luminol with an Ag(III) complex in alkaline solution. Under optimum conditions, CL intensities are proportional to the concentration of DA in the range of 1.0 × 10^?10 to 4.0 × 10^?8 mol L^?1. The detection limit is 3.0 × 10^?11 mol L^?1 for DA (3s), with a relative standard deviation (n = 13) of 2.3% for 1.0 × 10^?8 mol L^?1 DA. This method has also been applied for the determination of DA in commercial pharmaceutical injection samples. On the basis of the CL spectra and the results of the free‐radical trapping experiment of this work, a reaction mechanism for this CL reaction is proposed and discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Optical ascorbic acid sensor based on the fluorescence quenching of silver nanoparticles

A sensitive and selective fluorimetric sensor for the assay of ascorbic acid (AA) using silver nanoparticles as emission reagent was investigated. In this study, silver nanoparticles were prepared based on aqueous–gaseous phase reaction of silver nitrate solution and ammonia gas. The nanoparticles were water‐soluble, stable and had a narrow emission band. They were used as a fluorescence probe for the assay of ascorbic acid on its quenching effect on the emission of silver nanoparticles. The principal reason for quenching is likely to be a complexation between ascorbic acid and silver nanoparticles. The quenching mechanism was established by Stern–Volmer law. Under the optimum conditions, the quenched fluorescence intensity was linear with the concentration of ascorbic acid in the range of 4.1 × 10^?6 to 1.0 ×10^?4 m (r = 0.9985) with a detection limit of 1.0 × 10^?7 m . The RSD for repeatability of the sensor for the assay of ascorbic acid concentration of 3.0 × 10^?5 and 4.0 × 10^?6 m was found to be 1.5 and 1.3%, respectively. The proposed method was applied to the determination of ascorbic acid in vegetables and vitamin C tablets. Copyright © 2009 John Wiley & Sons, Ltd.     

Post‐chemiluminescence determination of chloramphenicol based on luminol–potassium periodate system

A post‐chemiluminescence (PCL) phenomenon was observed when chloramphenicol was injected into a mixture of luminol and potassium periodate after the chemiluminescence (CL) reaction of luminol–potassium periodate had finished. The possible reaction mechanism was proposed based on studies of the CL kinetic characteristics, the CL spectra, the fluorescence spectra and the UV‐vis absorption spectra of the related substances. Based on the PCL reaction, a rapid and sensitive method for the determination of chloramphenicol was established. The linear response range was 6.0 × 10^?7–1.0 × 10^?5 mol/L, with a correlation coefficient of 0.9986. The relative standard deviation (RSD) for 5.0 × 10^?6 mol/L chloramphenicol was 2.3% (n = 11). The detection limit was 1.6 × 10^?7 mol/L. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Highly selective determination of phenolphthalein by flow injection chemiluminescence method based on a molecular imprinting polymer

The phenolphthalein‐imprinted polymer was prepared with methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross‐linker. Taking advantage of the quenching effect of phenolphthalein on the potassium permanganate–HCl–anhydrous alcohol chemiluminescence system, a new model was established to determine phenolphthalein by a highly selective flow injection chemiluminescence method. The traditional flow‐though cell was replaced with a novel flow path using a Y‐shaped polymethyl methacrylate column, through which the three reactants were injected simultaneously. The linear range of this assay was from 1.0 × 10^?8 to 1.0 × 10^?6 g/mL (r = 0.9978). The limit of detection was 8.9 × 10^?9 g/mL. The relative standard deviation for the determination of 1.0 × 10^?8 g/mL phenolphthalein solution was below 2.9% (n = 11). The proposed method was applied to the determination of phenolphthalein in real samples with satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of carbamazepine in human urine and serum samples by high‐performance liquid chromatography with post‐column Ru(bipy)‐Ce(SO4)2 chemiluminescence detection

A novel, sensitive and rapid CL method coupled with high‐performance liquid chromatography separation for the determination of carbamazepine is described. The method was based on the fact that carbamazepine could significantly enhance the chemiluminescence of the reaction of cerium sulfate and tris(2,2‐bipyridyl) ruthenium(II) in the presence of acid. The chromatographic separation was performed on a Kromasil® (Sigma‐Aldrich) TM RP‐C18 column (id: 150 mm × 4.6 mm, particle size: 5 µm, pore size: 100 Å) with a mobile phase consisting of methanol–water‐glacial acetic acid (70:29:1, v/v/v) at a flowrate of 1.0 mL/min, the total analysis time was within 650 s. Under optimal conditions, CL intensity was linear for carbamazepine in the range 2.0 × 10^?8 ~ 4.0 × 10^?5 g/mL, with a detection limit of 6.0 × 10^?9 g/mL (S/N = 3) and the relative standard detection was 2.5% for 2.0 × 10^?6 g/mL (n = 11). This method was successfully applied to the analysis of carbamazepine in human urine and serum samples. The possible mechanism of the CL reaction is also discussed briefly. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of ketotifen fumarate by capillary electrophoresis with tris(2,2′‐bipyridyl) ruthenium(II) electrochemiluminescence detection

On the basis of an europium (III)‐doped Prussian blue analog film modifying platinum electrode as the working electrode, a Ru(bpy)₃²⁺‐based electrochemiluminescence (ECL) assay coupled with capillary electrophoresis has been first established for the determination of ketotifen fumarate (KTF). Analytes were injected onto a separation capillary of 50 cm length (50 μm i.d., 360 μm o.d.) by electrokinetic injection for 10 s at 10 kV. Parameters related to the separation and detection were discussed and optimized. It was proved that 15 mm phosphate buffer at pH 8.0 could achieve the most favorable resolution, and the highest sensitivity of detection was obtained using the detection potential at 1.25 V and 5 mm Ru(bpy)₃²⁺ in 100 mm phosphate buffer at pH 8.0 in the detection reservoir. Under the optimized conditions, the ECL intensity was in proportion to KTF concentration over the range from 3.0 × 10^?8 to 5.0 × 10^?6 g mL^?1 with a detection limit of 2.1 × 10^?8 g mL^?1 (3σ). The relative standard deviations of the ECL intensity and the migration time were 0.95 and 0.26%, respectively. The developed method was successfully applied to determine KTF contents in pharmaceuticals and human urine with recoveries between 99.5 and 107.0%. Copyright © 2010 John Wiley & Sons, Ltd.     

Flow injection–chemiluminescence determination of amoxycillin using potassium permanganate and formaldehyde system

It was found that amoxycillin can react with potassium permanganate in an acidic medium to produce chemiluminescence, which is greatly enhanced by formaldehyde. The optimum conditions for this chemiluminescent reaction were studied in detail using a flow‐injection system. The experimental results indicate that, under optimum conditions, the chemiluminescence intensity is linearly related to the concentration of amoxycillin in the range 5.48 × 10^?8–2.74 × 10^?6 mol[sol ]L, with a detection limit (3σ) of 4.1 × 10^?8 mol[sol ]L. The relative standard deviation was 1.0% at 1.1 × 10^?6 mol[sol ]L amoxycillin (n = 11 measurements). This method has the advantages of high sensitivity, fast response and ease of operation. The method was successfully applied to the determination of amoxycillin in raw medicines and capsules. Copyright © 2005 John Wiley & Sons, Ltd.     

Analysis of phenolic compounds in health care products by low‐pressure liquid‐chromatography with monolithic column and chemiluminescent detection

This paper presents a new application for monolithic columns with low‐pressure chromatographic separation using an flow injection analysis configuration with chemiluminescent detection for the determination of a mixture of phenolic compounds: phloroglucinol, 2,4‐dihydroxybenzoic acid, salicylic acid, methyl paraben and n‐propyl gallate. The procedure consists of the separation of these compounds on a reverse‐phase ultra‐short monolithic column with pH 3.0 acetate buffer and 5% acetonitrile as carrier phase. The detection is based on a chemiluminescence measurement coming from Ce(IV)–Rhodamine 6G chemistry with the incorporation of two different chemiluminescent chemical conditions in the chromatographic setup in order to enhance the sensitivity for the different phenolic compounds. All separation and detection variables were optimized to propose a determination method. The analysis is performed in 280?s, with the sampling frequency being some 13 h^?1. The calibration function is a double reciprocal function obtaining good results within two orders of magnitude. The limits of detection were 8.8 × 10 ^?8 m (phloroglucinol), 2.7 × 10 ^?8 m (2,4‐dihydroxybenzoic acid); 2.3 × 10 ^?8 m (salicylic acid); 5.2 × 10 ^?8 m (methyl paraben) and 4.1 × 10 ^?6 m (n‐propyl gallate), and the relative standard deviations at a medium level of the linear range were 4.4% (phloroglucinol), 2.8% (2,4‐dihydroxybenzoic acid), 5.2% (salicylic acid), 3.6% (methyl paraben) and 6.8% (n‐propyl gallate). The method was applied and validated satisfactorily for the determination of these compounds in healthcare products, comparing the results against an HPLC reference method. Copyright © 2009 John Wiley & Sons, Ltd.     

Engineered Yeasts as Reporter Systems for Odorant Detection

Abstract

The functional expression of olfactory receptors (ORs) is a primary requirement to utilize olfactory detection systems. We have taken advantage of the functional similarities between signal transduction cascades in the budding yeast Saccharomyces cerevisiae and mammalian cells. The yeast pheromone response pathway has been adapted to allow ligand‐dependent signaling of heterologous expressed G‐protein coupled receptors (GPCRs) via mammalian or chimeric yeast/mammalian Gα proteins. Two different strategies are reported here which offer a positive screen for functional pairs. The OR and Gα protein are introduced into the modified yeast cells such that they hijack the pheromone response pathway usually resulting in cell cycle arrest. The first strategy utilizes ligand‐induced expression of a FUS1‐HIS3 reporter gene to permit growth on a selective medium lacking histidine; the second to induce ligand‐dependent expression of a FUS1‐Hph reporter gene, conferring resistance to hygromycin. Validation of the systems was performed using the rat I7 receptor response to a range of aldehyde odorants previously characterized as functional ligands. Of these only heptanal produced a positive growth response in the concentration range 5 × 10^?8 to 5 × 10^?6 M. Induction conditions appear to be critical for functional expression, and the solvents of odorants have a toxic effect for the highest odorant concentrations. The preference of rat I7 receptor for the ligand heptanal in yeast has to be compared to concurrent results obtained with mammalian expression systems.     

The fluorescence enhancement of quercetin–nucleic acid system and the analytical application

Nucleic acid can greatly enhance the fluorescence intensity of quercetin in HMTA‐HCl (pH 5.5) buffer. The enhanced intensity is in proportion to the concentration of nucleic acids in the range 5.0 × 10^?9 to 1.0 × 10^?6 g/mL for fsDNA, 5.0 × 10^?9 to 7.0 × 10^?7 g/mL for ctDNA and 5.0 × 10^?9 to 1.0 × 10^?6 g/mL for yRNA, and their detection limits (S/N = 3) are 3.5 × 10^?9, 7.8 × 10^?10 and 2.6 × 10^?9 g/mL, respectively. In comparison with most reported fluorescent probes for the determination of nucleic acids, the proposed probe has higher sensitivity and lower toxicity. The interaction investigation indicates that quercetin binds with double‐strand DNA in groove binding mode, resulting in fluorescence enhancement of this system. Copyright © 2009 John Wiley & Sons, Ltd.     

Three‐dimensional (3‐D) fluorescence spectroscopy analysis of the fluorescent dissolved organic matter released by the marine toxic dinoflagellate Alexandrium catenella exposed to metal stress by zinc or lead

We investigated the effects of zinc or lead on growth and on exudation of fluorescent dissolved organic matter (FDOM) by the marine toxic dinoflagellate Alexandrium catenella (Whedon & Kofoid) Balech. The species was exposed to increasing free zinc (1.34 × 10^?7 M–3.98 × 10^?6 M) or lead (5.13 × 10^?9 M–1.82 × 10^?7 M) concentra‐tions. Low metal levels ([Zn²⁺] = 1.34 × 10^?7 M; [Pb²⁺] = 5.13 × 10^?9 M) had no effect on cell growth. Toxic effects were observed from higher metal contamination ([Zn²⁺] = 3.98 × 10^?6 M; [Pb²⁺] = 6.54 × 10^?8 M), as a conversion of vegetative cells into cysts. Analysis of the released FDOM by three‐dimensional (3‐D) fluorescence spectroscopy was achieved, using the parallel factor analysis (PARAFAC). The PARAFAC modeling revealed four components associated with two contributions: one related to the biological activity; the other linked to the organic matter decomposition in the culture medium. The C1 component combined a tryptophan peak and characteristics of humic substances, whereas the C2 component was considered as a tryptophan protein fluorophore. The two others C3 and C4 components were associated with marine organic matter production. Relea‐sed fluorescent substances were induced by low ([Zn²⁺]= 1.34 × 10^?7 M; [Pb²⁺] = 5.13 × 10^?9 M) and moderate ([Zn²⁺] = 6.21 × 10^?7 M; [Pb²⁺] = 2.64× 10^?9 M) metal concentrations, suggesting the activation of cellular mechanisms in response to metal stress, to exudate FDOM that could complex metal cations and reduce their toxicity toward A. catenella cells.     

Revealing binding interaction between seven drugs and immobilized β2‐adrenoceptor by high‐performance affinity chromatography using frontal analysis

The development of new approaches to study the affinity between ligands and G‐protein‐coupled receptors proves to be of growing interest for pharmacologists, chemists, and biologists. The aim of this work was to determine the binding of seven drugs to β₂‐adrenoceptors by frontal analysis using immobilized receptor stationary phase. The dissociation constants (K_d) were determined to be (3.16 ± 0.09) × 10^?4 M for salbutamol, (4.29 ± 0.12) × 10^?4 M for terbutaline, (6.19 ± 0.16) × 10^?4 M for methoxyphenamine, (2.11 ± 0.07) × 10^?4 M for tulobuterol, (1.82 ± 0.11) × 10^?4 M for fenoterol, (9.75 ± 0.24) × 10^?6 M formoterol, and (9.84 ± 0.26) × 10^?5 M for clenbuterol. These results showed a good correlation with the data determined by radioligand binding assay. Further investigations revealed that the dissociation constant mainly attributed to the number of hydrogen bonds in the structures of ligands. This study indicates that affinity chromatography using immobilized receptor stationary phase can be used for the direct determination of drug‐receptor binding interactions and has the potential to become a reliable alternative for quantitative studies of ligand–receptor interactions. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydrolysis of p-nitrotrifluoroacetanilide catalyzed by water and imidazole

The hydrolyses of p-nitrotrifluoroacetanilide catalyzed by water and imidazole were examined at 70°C. The pH-rate constant profile of the hydrolysis in H₂O was examined in the pH range 0.0–11.4. The hydrolysis was independent of pH in the region from pH 1.0 to 4.5, presumably a water-catalyzed reaction. The rate constant and the D₂O solvent isotope effect for this reaction were 1.0 × 10^?4 sec^?1 and 3.7, respectively. Both natural imidazole and imidazolium cation catalyzed hydrolysis. The rate constant of the hydrolysis catalyzed by neutral imidazole was determined to be 5.4 × 10^?3M^?1 sec^?1 and the D₂O solvent isotope effect was 1.8.