Coupled Translocation Events Generate Topological Heterogeneity at the Endoplasmic Reticulum Membrane

Topogenic determinants that direct protein topology at the endoplasmic reticulum membrane usually function with high fidelity to establish a uniform topological orientation for any given polypeptide. Here we show, however, that through the coupling of sequential translocation events, native topogenic determinants are capable of generating two alternate transmembrane structures at the endoplasmic reticulum membrane. Using defined chimeric and epitope-tagged full-length proteins, we found that topogenic activities of two C-trans (type II) signal anchor sequences, encoded within the seventh and eighth transmembrane (TM) segments of human P-glycoprotein were directly coupled by an inefficient stop transfer (ST) sequence (TM7b) contained within the C-terminus half of TM7. Remarkably, these activities enabled TM7 to achieve both a single- and a double-spanning TM topology with nearly equal efficiency. In addition, ST and C-trans signal anchor activities encoded by TM8 were tightly linked to the weak ST activity, and hence topological fate, of TM7b. This interaction enabled TM8 to span the membrane in either a type I or a type II orientation. Pleiotropic structural features contributing to this unusual topogenic behavior included 1) a short, flexible peptide loop connecting TM7a and TM7b, 2) hydrophobic residues within TM7b, and 3) hydrophilic residues between TM7b and TM8.     

Effect of sequence hydrophobicity and bilayer width upon the minimum length required for the formation of transmembrane helices in membranes

The minimum hydrophobic length necessary to form a transmembrane (TM) helix in membranes was investigated using model membrane-inserted hydrophobic helices. The fluorescence of a Trp at the center of the sequence and its sensitivity to quenching were used to ascertain helix position within the membrane. Peptides with hydrophobic cores composed of poly(Leu) were compared to sequences containing a poly 1:1 Leu:Ala core (which have a hydrophobicity typical of natural TM helices). Studies varying bilayer width revealed that the poly(Leu) core peptides predominately formed a TM state when the bilayer width exceeded hydrophobic sequence length by (i.e. when negative mismatch was) up to ∼ 11-12 Å (e.g. the case of a 11-12 residue hydrophobic sequence in bilayers with a biologically relevant width, i.e. dioleoylphosphatidylcholine (DOPC) bilayers), while poly(LeuAla) core peptides formed predominantly TM state with negative mismatch of up to 9 Å (a 13 residue hydrophobic sequence in DOPC bilayers). This indicates that minimum length necessary to form a predominating amount of a TM state (minimum TM length) is only modestly hydrophobicity-dependent for the sequences studied here, and a formula that defines the minimum TM length as a function of hydrophobicity for moderately-to-highly hydrophobic sequences was derived. The minimum length able to form a stable TM helix for alternating LeuAla sequences, and that for sequences with a Leu block followed by an Ala block, was similar, suggesting that a hydrophobicity gradient along the sequence may not be an important factor in TM stability. TM stability was also similar for sequences flanked by different charged ionizable residues (Lys, His, Asp). However, ionizable flanking residues destabilized the TM configuration much more when charged than when uncharged. The ability of short hydrophobic sequences to form TM helices in membranes in the presence of substantial negative mismatch implies that lipid bilayers have a considerable ability to adjust to negative mismatch, and that short TM helices may be more common than generally believed. Factors that modulate the ability of bilayers to adjust to mismatch may strongly affect the configuration of short hydrophobic helices.     

WRF-TMH: predicting transmembrane helix by fusing composition index and physicochemical properties of amino acids

Membrane protein is the prime constituent of a cell, which performs a role of mediator between intra and extracellular processes. The prediction of transmembrane (TM) helix and its topology provides essential information regarding the function and structure of membrane proteins. However, prediction of TM helix and its topology is a challenging issue in bioinformatics and computational biology due to experimental complexities and lack of its established structures. Therefore, the location and orientation of TM helix segments are predicted from topogenic sequences. In this regard, we propose WRF-TMH model for effectively predicting TM helix segments. In this model, information is extracted from membrane protein sequences using compositional index and physicochemical properties. The redundant and irrelevant features are eliminated through singular value decomposition. The selected features provided by these feature extraction strategies are then fused to develop a hybrid model. Weighted random forest is adopted as a classification approach. We have used two benchmark datasets including low and high-resolution datasets. tenfold cross validation is employed to assess the performance of WRF-TMH model at different levels including per protein, per segment, and per residue. The success rates of WRF-TMH model are quite promising and are the best reported so far on the same datasets. It is observed that WRF-TMH model might play a substantial role, and will provide essential information for further structural and functional studies on membrane proteins. The accompanied web predictor is accessible at http://111.68.99.218/WRF-TMH/.     

kPROT: a knowledge-based scale for the propensity of residue orientation in transmembrane segments. Application to membrane protein structure prediction

Modeling of integral membrane proteins and the prediction of their functional sites requires the identification of transmembrane (TM) segments and the determination of their angular orientations. Hydrophobicity scales predict accurately the location of TM helices, but are less accurate in computing angular disposition. Estimating lipid-exposure propensities of the residues from statistics of solved membrane protein structures has the disadvantage of relying on relatively few proteins. As an alternative, we propose here a scale of knowledge-based Propensities for Residue Orientation in Transmembrane segments (kPROT), derived from the analysis of more than 5000 non-redundant protein sequences. We assume that residues that tend to be exposed to the membrane are more frequent in TM segments of single-span proteins, while residues that prefer to be buried in the transmembrane bundle interior are present mainly in multi-span TMs. The kPROT value for each residue is thus defined as the logarithm of the ratio of its proportions in single and multiple TM spans. The scale is refined further by defining it for three discrete sections of the TM segment; namely, extracellular, central, and intracellular. The capacity of the kPROT scale to predict angular helical orientation was compared to that of alternative methods in a benchmark test, using a diversity of multi-span alpha-helical transmembrane proteins with a solved 3D structure. kPROT yielded an average angular error of 41 degrees, significantly lower than that of alternative scales (62 degrees -68 degrees ). The new scale thus provides a useful general tool for modeling and prediction of functional residues in membrane proteins. A WWW server (http://bioinfo.weizmann.ac.il/kPROT) is available for automatic helix orientation prediction with kPROT.     

Proline-induced distortions of transmembrane helices

Proline residues in the transmembrane (TM) alpha-helices of integral membrane proteins have long been suspected to play a key role for helix packing and signal transduction by inducing regions of helix distortion and/or dynamic flexibility (hinges). In this study we try to characterise the effect of proline on the geometric properties of TM alpha-helices. We have examined 199 transmembrane alpha-helices from polytopic membrane proteins of known structure. After examining the location of proline residues within the amino acid sequences of TM helices, we estimated the helix axes either side of a hinge and hence identified a hinge residue. This enabled us to calculate helix kink and swivel angles. The results of this analysis show that proline residues occur with a significant concentration in the centre of sequences of TM alpha-helices. In this location, they may induce formation of molecular hinges, located on average about four residues N-terminal to the proline residue. A superposition of proline-containing TM helices structures shows that the distortion induced is anisotropic and favours certain relative orientations (defined by helix kink and swivel angles) of the two helix segments.     

A small hydrophobic domain anchors leader peptidase to the cytoplasmic membrane of Escherichia coli

Leader peptidase is an enzyme of the Escherichia coli cytoplasmic membrane which removes amino-terminal leader sequences from many secreted and membrane proteins. Three potential membrane-spanning segments exist in the first 98 amino acids of leader peptidase. We have characterized the topology of leader peptidase based on its sensitivity to protease digestion. Proteinase K and trypsin treatment of right-side-out inner membrane vesicles and spheroplasts yields protected fragments of approximately 80 and 105 amino acid residues, respectively. We have shown that both fragments are derived from the amino terminus of the protein and that the smaller protected peptide can be derived from the larger. Removal of the third potential membrane-spanning segment (residues 82-98) does not affect the size of the proteinase K-protected fragment but does reduce the size of the trypsin-protected peptide. Because the proteinase K-protected fragment is about 9000 daltons, is derived from the amino terminus of leader peptidase, and its size is not affected when amino acids 82-98 are removed from the protein, it must extend from the amino terminus to approximately residue 80. Likewise, the trypsin-protected fragment must extend from the amino terminus to about residue 105. These data suggest a model for the orientation of leader peptidase in which the second hydrophobic stretch (residues 62-76) spans the cytoplasmic membrane and the third hydrophobic stretch resides in the periplasmic space.     

Sequences determining the cytoplasmic localization of a chemoreceptor domain.

The Escherichia coli serine chemoreceptor (Tsr) is a protein with a simple topology consisting of two membrane-spanning sequences (TM1 and TM2) separating a large periplasmic domain from N-terminal and C-terminal cytoplasmic regions. We analyzed the contributions of several sequence elements to the cytoplasmic localization of the C-terminal domain by using chemoreceptor-alkaline phosphatase gene fusions. The principal findings were as follows. (i) The cytoplasmic localization of the C-terminal domain depended on TM2 but was quite tolerant of mutations partially deleting or introducing charged residues into the sequence. (ii) The basal level of C-terminal domain export was significantly higher in proteins with the wild-type periplasmic domain than in derivatives with a shortened periplasmic domain, suggesting that the large size of the wild-type domain promotes partial membrane misinsertion. (iii) The membrane insertion of deletion derivatives with a single spanning segment (TM1 or TM2) could be controlled by either an adjacent positively charged sequence or an adjacent amphipathic sequence. The results provide evidence that the generation of the Tsr membrane topology is an overdetermined process directed by an interplay of sequences promoting and opposing establishment of the normal structure.     

Defining the regions of Escherichia coli YidC that contribute to activity

The YidC/Oxa1/Alb3 family of proteins catalyzes membrane protein insertion in bacteria, mitochondria, and chloroplasts. In this study, we investigated which regions of the bacterial YidC protein are important for its function in membrane protein biogenesis. In Escherichia coli, YidC spans the membrane six times, with a large 319-residue periplasmic domain following the first transmembrane domain. We found that this large periplasmic domain is not required for YidC function and that the residues in the exposed hydrophilic loops or C-terminal tail are not critical for YidC activity. Rather, the five C-terminal transmembrane segments that contain the three consensus sequences in the YidC/Oxa1/Alb3 family are important for its function. However, by systematically replacing all the residues in transmembrane segment (TM) 2, TM3, and TM6 with serine and by swapping TM4 and TM5 with unrelated transmembrane segments, we show that the precise sequence of these transmembrane regions is not essential for in vivo YidC activity. Single serine mutations in TM2, TM3, and TM6 impaired the membrane insertion of the Sec-independent procoat-leader peptidase protein. We propose that the five C-terminal transmembrane segments of YidC function as a platform for the translocating substrate protein to support its insertion into the membrane.     

The first cytoplasmic loop of the mannitol permease from Escherichia coli is accessible for sulfhydryl reagents from the periplasmic side of the membrane

The mannitol permease (EII(Mtl)) from Escherichia coli couples mannitol transport to phosphorylation of the substrate. Renewed topology prediction of the membrane-embedded C domain suggested that EII(Mtl) contains more membrane-embedded segments than the six proposed previously on the basis of a PhoA fusion study. Cysteine accessibility was used to confirm this notion. Since cysteine 384 in the cytoplasmic B domain is crucial for the phosphorylation activity of EII(Mtl), all cysteine mutants contained this activity-linked cysteine residue in addition to those introduced for probing the membrane topology of the protein. To distinguish between the activity-linked cysteine and the probed cysteine, either trypsin was used to specifically digest the two cytoplasmic domains (A and B), thereby removing Cys384, or Cys384 was protected by phosphorylation from alkylation by N-ethylmaleimide (NEM). Our data show that upon phosphorylation EII(Mtl) undergoes major conformational changes, whereby residues in the putative first cytoplasmic loop become accessible to NEM. Other residues in this loop were accessible to NEM in intact cells and inside-out membrane vesicles, but cysteine residues at these positions only reacted with the membrane-impermeable sulfhydryl reagent from the periplasmic side of the protein. These and other results suggest that the predicted loop between TM2 and TM3 may fold back into the membrane and form part of the translocation path.     

Functional response of the small multidrug resistance protein EmrE to mutations in transmembrane helix 2

Escherichia coli EmrE is a small multidrug resistance protein encompassing four transmembrane (TM) sequences that oligomerizes to confer resistance to antimicrobials. Here we examined the effects on in vivo protein accumulation and ethidium resistance activity of single residue substitutions at conserved and variable positions in EmrE transmembrane segment 2 (TM2). We found that activity was reduced when conserved residues localized to one TM2 surface were replaced. Our findings suggest that conserved TM2 positions tolerate greater residue diversity than conserved sites in other EmrE TM sequences, potentially reflecting a source of substrate polyspecificity.     

Reorientation of aquaporin-1 topology during maturation in the endoplasmic reticulum

The topology of most eukaryotic polytopic membrane proteins is established cotranslationally in the endoplasmic reticulum (ER) through a series of coordinated translocation and membrane integration events. For the human aquaporin water channel AQP1, however, the initial four-segment-spanning topology at the ER membrane differs from the mature six-segment-spanning topology at the plasma membrane. Here we use epitope-tagged AQP1 constructs to follow the transmembrane (TM) orientation of key internal peptide loops in Xenopus oocyte and cell-free systems. This analysis revealed that AQP1 maturation in the ER involves a novel topological reorientation of three internal TM segments and two peptide loops. After the synthesis of TMs 4-6, TM3 underwent a 180-degree rotation in which TM3 C-terminal flanking residues were translocated from their initial cytosolic location into the ER lumen and N-terminal flanking residues underwent retrograde translocation from the ER lumen to the cytosol. These events convert TM3 from a type I to a type II topology and reposition TM2 and TM4 into transmembrane conformations consistent with the predicted six-segment-spanning AQP1 topology. AQP1 topological reorientation was also associated with maturation from a protease-sensitive conformation to a protease-resistant structure with water channel function. These studies demonstrate that initial protein topology established via cotranslational translocation events in the ER is dynamic and may be modified by subsequent steps of folding and/or maturation.     

Cooperativity and flexibility of cystic fibrosis transmembrane conductance regulator transmembrane segments participate in membrane localization of a charged residue

Polytopic protein topology is established in the endoplasmic reticulum (ER) by sequence determinants encoded throughout the nascent polypeptide. Here we characterize 12 topogenic determinants in the cystic fibrosis transmembrane conductance regulator, and identify a novel mechanism by which a charged residue is positioned within the plane of the lipid bilayer. During cystic fibrosis transmembrane conductance regulator biogenesis, topology of the C-terminal transmembrane domain (TMs 7-12) is directed by alternating signal (TMs 7, 9, and 11) and stop transfer (TMs 8, 10, and 12) sequences. Unlike conventional stop transfer sequences, however, TM8 is unable to independently terminate translocation due to the presence of a single charged residue, Asp(924), within the TM segment. Instead, TM8 stop transfer activity is specifically dependent on TM7, which functions both to initiate translocation and to compensate for the charged residue within TM8. Moreover, even in the presence of TM7, the N terminus of TM8 extends significantly into the ER lumen, suggesting a high degree of flexibility in establishing TM8 transmembrane boundaries. These studies demonstrate that signal sequences can markedly influence stop transfer behavior and indicate that ER translocation machinery simultaneously integrates information from multiple topogenic determinants as they are presented in rapid succession during polytopic protein biogenesis.     

Polar residues in membrane domains of proteins: molecular basis for helix-helix association in a mutant CFTR transmembrane segment

Polar side chains constitute over 20% of residues in the transmembrane (TM) helices of membrane proteins, where they may serve as hydrogen bond interaction sites for phenotypic polar mutations that arise in membrane protein-related diseases. To systematically explore the structural consequences of H-bonds between TM helices, we focused on TM4 of the cystic fibrosis conductance regulator (CFTR) and its cystic fibrosis- (CF-) phenotypic mutation, V232D, as a model system. Synthetic peptides corresponding to wild-type (TM4-wt) (residues 219-242: LQASAFCGLGFLIVLALFQAGLGR) and mutant (TM4-V232D) sequences both adopt helical structures in SDS micelles and display dimer bands on SDS-PAGE arising from disulfide bond formation via wild-type residue Cys-225. However, the TM4-V232D peptide additionally forms a ladder of noncovalent oligomers, including tetramers, hexamers, and octamers, mediated by a hydrogen bond network involving Asp-Gln side chain-side chain interactions. Ala-scanning mutagenesis of the TM4 sequence indicated that ladder formation minimally required the simultaneous presence of the Cys-225, Asp-232, and Gln-237 residues. As random hydrophobic sequences containing these three residues at TM4 equivalent positions did not oligomerize, specific van der Waals packing interactions between helix side chains were also shown to play a crucial role. Overall, the results suggest that polar mutations in membrane domains, in conjunction with critically positioned polar partner residues, potentially constitute a source of aberrant helix interactions that could contribute to loss of function when they arise in protein transmembrane domains.     

An internal region of the peroxisomal membrane protein PMP47 is essential for sorting to peroxisomes

Targeting sequences on peroxisomal membrane proteins have not yet been identified. We have attempted to find such a sequence within PMP47, a protein of the methylotrophic yeast, Candida boidinii. This protein of 423 amino acids shows sequence similarity with proteins in the family of mitochondrial carrier proteins. As such, it is predicted to have six membrane-spanning domains. Protease susceptibility experiments are consistent with a six-membrane-spanning model for PMP47, although the topology for the peroxisomal protein is inverted compared with the mitochondrial carrier proteins. PMP47 contains two potential peroxisomal targeting sequences (PTS1), an internal SKL (residues 320- 322) and a carboxy terminal AKE (residues 421-423). Using a heterologous in vivo sorting system, we show that efficient sorting occurs in the absence of both sequences. Analysis of PMP47- dihydrofolate reductase (DHFR) fusion proteins revealed that amino acids 1-199 of PMP47, which contain the first three putative membrane spans, do not contain the necessary targeting information, whereas a fusion with amino acids 1-267, which contains five spans, is fully competent for sorting to peroxisomes. Similarly, a DHFR fusion construct containing residues 268-423 did not target to peroxisomes while residues 203-420 appeared to sort to that organelle, albeit at lower efficiency than the 1-267 construct. However, DHFR constructs containing only amino acids 185-267 or 203-267 of PMP47 were not found to be associated with peroxisomes. We conclude that amino acids 199-267 are necessary for peroxisomal targeting, although additional sequences may be required for efficient sorting to, or retention by, the organelles.     

Evidence for interactions between domains of TatA and TatB from mutagenesis of the TatABC subunits of the twin-arginine translocase

The twin-arginine translocation (Tat) system transports folded proteins across the bacterial plasma membrane. Three subunits, TatA, B and C, are known to be involved but their modes of action are poorly understood, as are the inter-subunit interactions occurring within Tat complexes. We have generated mutations in the single transmembrane (TM) spans of TatA and TatB, with the aim of generating structural distortions. We show that substitution in TatB of three residues by glycine, or a single residue by proline, has no detectable effect on translocation, whereas the presence of three glycines in the TatA TM span completely blocks Tat translocation activity. The results show that the integrity of the TatA TM span is vital for Tat activity, whereas that of TatB can accommodate large-scale distortions. Near-complete restoration of activity in TatA mutants is achieved by the simultaneous presence of a V12P mutation in the TatB TM span, strongly implying a direct functional interaction between the TatA/B TM spans. We also analyzed the predicted amphipathic regions in TatA and TatB and again find evidence of direct interaction; benign mutations in either subunit completely blocked translocation of two Tat substrates when present in combination. Finally, we have re-examined the effects of previously analyzed TatABC mutations under conditions of high translocation activity. Among numerous TatA or TatB mutations tested, TatA F39A alone blocked translocation, and only substitutions of P48 and F94 in TatC blocked translocation activity.     

Analysis of the membrane topology of transmembrane segments in the C-terminal hydrophobic domain of the yeast vacuolar ATPase subunit a (Vph1p) by chemical modification

The integral V(0) domain of the vacuolar (H(+))-ATPases (V-ATPases) provides the pathway by which protons are transported across the membrane. Subunit a is a 100-kDa integral subunit of V(0) that plays an essential role in proton translocation. To better define the membrane topology of subunit a, unique cysteine residues were introduced into a Cys-less form of the yeast subunit a (Vph1p) and the accessibility of these cysteine residues to modification by the membrane permeant reagent N-ethylmaleimide (NEM) and the membrane impermeant reagent polyethyleneglycol maleimide (PEG-mal) in the presence and absence of the protein denaturant SDS was assessed. Thirty Vph1p mutants containing unique cysteine residues were constructed and analyzed. Cysteines introduced between residues 670 and 710 and between 807 and 840 were modified by PEG-mal in the absence of SDS, indicating a cytoplasmic orientation. Cysteines introduced between residues 602 and 620 and between residues 744 and 761 were modified by NEM but not PEG-mal in the absence of SDS, suggesting a lumenal orientation. Finally, cysteines introduced at residues 638, 645, 648, 723, 726, 734, and at nine positions between residue 766 and 804 were modified by NEM and PEG-mal only in the presence of SDS, consistent with their presence within the membrane or at a protein-protein interface. The results support an eight transmembrane helix (TM) model of subunit a in which the C terminus is located on the cytoplasmic side of the membrane and provide information on the location of hydrophilic loops separating TM6, 7, and 8.     

Endoplasmic reticulum-associated degradation of a degron-containing polytopic membrane protein

Abstract

The presence of two basic amino acids strategically located within a single spanning transmembrane region has previously been shown to act as a signal for the endoplasmic reticulum associated degradation (ERAD) of several polypeptides. In contrast, the functionality of this degron motif within the context of a polytopic membrane protein has not been established. Using opsin as a model system, we have investigated the consequences of inserting the degron motif in the first of its seven transmembrane (TM) spans. Whilst these basic residue reduce the binding of the targeting factor, signal recognition particle, to the first TM span, this has no effect on membrane integration in vitro or in vivo. This most likely reflects the presence of multiple TM spans that can act as targeting signals within in the nascent opsin chain. We find that the degron motif leads to the efficient retention of mutant opsin chains at the endoplasmic reticulum. The mutant opsin polypeptides are degraded via a proteasomal pathway that involves the actions of the E3 ubiquitin ligase HRD1. In contrast, wild-type opsin remains stable for a prolonged period even when artificially accumulated at the endoplasmic reticulum. We conclude that a single dibasic degron motif is sufficient to initiate both the ER retention and subsequent degradation of ospin via an ERAD pathway.     

Competition between neighboring topogenic signals during membrane protein insertion into the ER

To better define the mechanism of membrane protein insertion into the membrane of the endoplasmic reticulum, we measured the kinetics of translocation across microsomal membranes of the N-terminal lumenal tail and the lumenal domain following the second transmembrane segment (TM2) in the multispanning mouse protein Cig30. In the wild-type protein, the N-terminal tail translocates across the membrane before the downstream lumenal domain. Addition of positively charged residues to the N-terminal tail dramatically slows down its translocation and allows the downstream lumenal domain to translocate at the same time as or even before the N-tail. When TM2 is deleted, or when the loop between TM1 and TM2 is lengthened, addition of positively charged residues to the N-terminal tail causes TM1 to adopt an orientation with its N-terminal end in the cytoplasm. We suggest that the topology of the TM1-TM2 region of Cig30 depends on a competition between TM1 and TM2 such that the transmembrane segment that inserts first into the ER membrane determines the final topology.     

Membrane integration of the second transmembrane segment of band 3 requires a closely apposed preceding signal-anchor sequence

We have investigated the topogenic rules of multispanning membrane proteins using erythrocyte band 3. Here, the fine structural requirements for the correct disposition of its second transmembrane segment (TM2) were assessed. We made fusion proteins where TM1 and the loop sequence preceding TM2 were changed and fused to prolactin. They were expressed in a cell-free system supplemented with rough microsomal membrane, and their topologies on the membrane were assessed by protease sensitivity and N-glycosylation. TM1 was demonstrated to be a signal-anchor sequence that mediates translocation of the downstream portion, and thus TM2 should be responsible to halt the translocation to acquire TM topology. When the loop between TM1 and TM2 was elongated, however, TM2 was readily translocated through the membrane and not integrated. For the membrane integration of TM2, TM2 must be in close proximity to TM1. The TM1 can be replaced with another signal-anchor sequence with a long hydrophobic segment but not with a signal sequence with shorter hydrophobic stretch. The length of the hydrophobic segment affected final topology of TM2. We concluded that the two TM segments work synergistically within the translocon to acquire the correct topology and that the length of the preceding signal sequence is critical for stable transmembrane assembly of TM2. We propose that direct interaction among the TM segments is one of the critical factors for the transmembrane topogenesis of multispanning membrane proteins.     

The position of the Gly-xxx-Gly motif in transmembrane segments modulates dimer affinity.

Although the intrinsic low solubility of membrane proteins presents challenges to their high-resolution structure determination, insight into the amino acid sequence features and forces that stabilize their folds has been provided through study of sequence-dependent helix-helix interactions between single transmembrane (TM) helices. While the stability of helix-helix partnerships mediated by the Gly-xxx-Gly (GG4) motif is known to be generally modulated by distal interfacial residues, it has not been established whether the position of this motif, with respect to the ends of a given TM segment, affects dimer affinity. Here we examine the relationship between motif position and affinity in the homodimers of 2 single-spanning membrane protein TM sequences: glycophorin A (GpA) and bacteriophage M13 coat protein (MCP). Using the TOXCAT assay for dimer affinity on a series of GpA and MCP TM segments that have been modified with either 4 Leu residues at each end or with 8 Leu residues at the N-terminal end, we show that in each protein, centrally located GG4 motifs are capable of stronger helix-helix interactions than those proximal to TM helix ends, even when surrounding interfacial residues are maintained. The relative importance of GG4 motifs in stabilizing helix-helix interactions therefore must be considered not only in its specific residue context but also in terms of the location of the interactive surface relative to the N and C termini of alpha-helical TM segments.