Characterization of the metal ion binding site in the anti-terminator protein, HutP, of Bacillus subtilis

HutP is an RNA-binding protein that regulates the expression of the histidine utilization (hut) operon in Bacillus subtilis, by binding to cis-acting regulatory sequences on hut mRNA. It requires L-histidine and an Mg²⁺ ion for binding to the specific sequence within the hut mRNA. In the present study, we show that several divalent cations can mediate the HutP–RNA interactions. The best divalent cations were Mn²⁺, Zn²⁺ and Cd²⁺, followed by Mg²⁺, Co²⁺ and Ni²⁺, while Cu²⁺, Yb²⁺ and Hg²⁺ were ineffective. In the HutP–RNA interactions, divalent cations cannot be replaced by monovalent cations, suggesting that a divalent metal ion is required for mediating the protein–RNA interactions. To clarify their importance, we have crystallized HutP in the presence of three different metal ions (Mg²⁺, Mn²⁺ and Ba²⁺), which revealed the importance of the metal ion binding site. Furthermore, these analyses clearly demonstrated how the metal ions cause the structural rearrangements that are required for the hut mRNA recognition.     

Structural insights of HutP-mediated regulation of transcription of the hut operon in Bacillus subtilis

Regulating gene expression directly at the mRNA level represents a novel approach to control cellular processes in all organisms. In this respect, an RNA-binding protein plays a key role by targeting the mRNA to regulate the expression by attenuation or an anti-termination mechanism only in the presence of their cognate ligands. Although many proteins are known to use these mechanisms to regulate the gene expression, no structural insights have been revealed to date to explain how these proteins trigger the conformation for the recognition of RNA. This review describes the activated conformation of HutP, brought by the coordination of L-histidine and Mg²⁺ ions, based on our recently solved crystal structures [uncomplexed HutP, HutP–Mg²⁺, HutP–L-histidine, HutP–Mg²⁺–L-histidine, HutP–Mg²⁺–L-histidine-RNA]. Once the HutP is activated, the protein binds specifically to bases within the terminator region, without undergoing further structural rearrangement. Also, a high resolution (1.48 Å) crystal structure of the quaternary complex containing the three GAG motifs is presented. This analysis clearly demonstrates that the first base in the UAG motifs is not important for the function and is consistent with our previous observations.     

Identification of important chemical groups of the hut mRNA for HutP interactions that regulate the hut operon in Bacillus subtilis

HutP is an RNA binding protein that regulates the expression of the histidine utilization (hut) operon in Bacillus species by binding to cis-acting regulatory sequences on hut mRNA. We recently solved the HutP crystal structure, which revealed a novel fold where three dimers are arranged in a 3-fold axis to form the hexamer. We also identified a minimal RNA binding element sufficient for HutP binding: three UAG trinucleotide motifs, each separated by 4 nt, located just upstream of the terminator. In the present study we have identified important RNA chemical groups essential for HutP interactions, by combining an in vitro selection strategy and analyses by site-specific base substitutions. These analyses suggest that each HutP molecule recognizes one UAG motif, where the first base (U) can be substituted with other bases, while the second and third bases (A and G) are required for the interactions. Further analyses of the chemical groups of the A and G bases in the UAG motif by modified base analogs suggested the importance of the exocyclic NH₂ group in these bases. Also, in this motif, only the 2′-OH group of A is important for HutP recognition. Considering the important chemical groups identified here, as well as the electrostatic potential analysis of HutP, we propose that Glu137 is one of the important residues for the HutP–RNA interactions.     

Conformational Changes in a Plant Ketol-Acid Reductoisomerase upon Mg and NADPH Binding as Revealed by Two Crystal Structures

Ketol-acid reductoisomerase (KARI; EC 1.1.1.86) is an enzyme in the branched-chain amino acid biosynthesis pathway where it catalyzes the conversion of 2-acetolactate into (2R)-2,3-dihydroxy-3-isovalerate or the conversion of 2-aceto-2-hydroxybutyrate into (2R,3R)-2,3-dihydroxy-3-methylvalerate. KARI catalyzes two reactions—alkyl migration and reduction—and requires Mg²⁺ and NADPH for activity. To date, the only reported structures for a plant KARI are those of the spinach enzyme-Mn²⁺-(phospho)ADP ribose-(2R,3R)-2,3-dihydroxy-3-methylvalerate complex and the spinach KARI-Mg²⁺-NADPH-N-hydroxy-N-isopropyloxamate complex, where N-hydroxy-N-isopropyloxamate is a predicted transition-state analog. These studies demonstrated that the enzyme consists of two domains, N-domain and C-domain, with the active site at the interface of these domains. Here, we have determined the structures of the rice KARI-Mg²⁺ and rice KARI-Mg²⁺-NADPH complexes to 1.55 Å and 2.80 Å resolutions, respectively. In comparing the structures of all the complexes, several differences are observed. Firstly, the N-domain is rotated up to 15° relative to the C-domain, expanding the active site by up to 4 Å. Secondly, an α-helix in the C-domain that includes residues V510-T519 and forms part of the active site moves by ∼ 3.9 Å upon binding of NADPH. Thirdly, the 15 C-terminal amino acid residues in the rice KARI-Mg²⁺ complex are disordered. In the rice KARI-Mg²⁺-NADPH complex and the spinach KARI structures, many of the 15 residues bind to NADPH and the N-domain and cover the active site. Fourthly, the location of the metal ions within the active site can vary by up to 2.7 Å. The new structures allow us to propose that an induced-fit mechanism operates to (i) allow substrate to enter the active site, (ii) close over the active site during catalysis, and (iii) open the active site to facilitate product release.     

Rational design, synthesis and evaluation of first generation inhibitors of the Giardia lamblia fructose-1,6-biphosphate aldolase

Inhibitors of the Giardia lamblia fructose 1,6-bisphosphate aldolase (GlFBPA), which transforms fructose 1,6-bisphosphate (FBP) to dihydroxyacetone phosphate and glyceraldehyde 3-phosphate, were designed based on 3-hydroxy-2-pyridone and 1,2-dihydroxypyridine scaffolds that position two negatively charged tetrahedral groups for interaction with substrate phosphate binding residues, a hydrogen bond donor to the catalytic Asp83, and a Zn²⁺ binding group. The inhibition activities for the GlFBPA catalyzed reaction of FBP of the prepared alkyl phosphonate/phosphate substituted 3-hydroxy-2-pyridinones and a dihydroxypyridine were determined. The 3-hydroxy-2-pyridone inhibitor 8 was found to bind to GlFBPA with an affinity (K_i = 14 μM) that is comparable to that of FBP (K_m = 2 μM) or its inert analog TBP (K_i = 1 μM). The X-ray structure of the GlFBPA-inhibitor 8 complex (2.3 Å) shows that 8 binds to the active site in the manner predicted by in silico docking with the exception of coordination with Zn²⁺. The observed distances and orientation of the pyridone ring O=C-C-OH relative to Zn²⁺ are not consistent with a strong interaction. To determine if Zn²⁺coordination occurs in the GlFBPA-inhibitor 8 complex in solution, EXAFS spectra were measured. A four coordinate geometry comprised of the three enzyme histidine ligands and an oxygen atom from the pyridone ring O=C-C-OH was indicated. Analysis of the Zn²⁺ coordination geometries in recently reported structures of class II FBPAs suggests that strong Zn²⁺ coordination is reserved for the enediolate-like transition state, accounting for minimal contribution of Zn²⁺ coordination to binding of 8 to GlFBPA.     

Production,partial purification and characterization of organic solvent tolerant lipase from Burkholderia multivorans V2 and its application for ester synthesis

Burkholderia multivorans V2 (BMV2) isolated from soil was found to produce an extracellular solvent tolerant lipase (6.477 U/mL). This lipase exhibited maximum stability in n-hexane retaining about 97.8% activity for 24 h. After performing statistical optimization of medium components for lipase production, a 2.2-fold (14 U/mL) enhancement in the lipase production was observed. The crude lipase from BMV2 was partially purified by ultrafiltration and gel permeation chromatography with 24.64-fold purification. The K_m and V_max values for partially purified BMV2 lipase were found to be 1.56 mM and 5.62 μmoles/mg min. The metal ions Ca²⁺, Mg²⁺ and Mn²⁺ had stimulatory effect on lipase activity, whereas Cu²⁺, Fe²⁺ and Zn²⁺ strongly inhibited the lipase activity. EDTA and PMSF at 10 mM concentration strongly inhibited the lipase activity. Non-ionic and anionic surfactants stimulated the lipase activity. BMV2 lipase was proved to be efficient in synthesis of ethyl butyrate ester under non-aqueous environment.     

Structural and thermodynamic characterization of metal ion binding in Streptococcus suis Dpr

The use of protein cages for the creation of novel inorganic nanomaterials has attracted considerable attention in recent years. Ferritins are among the most commonly used protein cages in nanoscience. Accordingly, the binding of various metals to ferritins has been studied extensively. Dps (DNA-binding protein from starved cells)-like proteins belong to the ferritin superfamily. In contrast to ferritins, Dps-like proteins form 12-mers instead of 24-mers, have a different ferroxidase center, and are able to store a smaller amount of iron atoms in a hollow cavity (up to ∼ 500, instead of the ∼ 4500 iron atoms found in ferritins). With the exception of iron, the binding of other metal cations to Dps proteins has not been studied in detail. Here, the binding of six divalent metal ions (Zn²⁺, Mn²⁺, Ni²⁺, Co²⁺, Cu²⁺, and Mg²⁺) to Streptococcus suisDps-like peroxide resistance protein (SsDpr) was characterized by X-ray crystallography and isothermal titration calorimetry (ITC). All metal cations, except for Mg²⁺, were found to bind to the ferroxidase center similarly to Fe²⁺, with moderate affinity (binding constants between 0.1 × 10⁵ M^− 1 and 5 × 10⁵ M^− 1). The stoichiometry of binding, as deduced by ITC data, suggested the presence of a dication ferroxidase site. No other metal binding sites were identified in the protein. The results presented here demonstrate the ability of SsDpr to bind various metals as substitutes for iron and will help in better understanding protein-metal interactions in the Dps family of proteins as potential metal nanocontainers.     

Monovalent and divalent promoted GAAA tetraloop-receptor tertiary interactions from freely diffusing single-molecule studies

Proper assembly of RNA into catalytically active three-dimensional structures requires multiple tertiary binding interactions, individual characterization of which is crucial to a detailed understanding of global RNA folding. This work focuses on single-molecule fluorescence studies of freely diffusing RNA constructs that isolate the GAAA tetraloop-receptor tertiary interaction. Freely diffusing conformational dynamics are explored as a function of Mg²⁺ and Na⁺ concentration, both of which promote facile docking, but with 500-fold different affinities. Systematic shifts in mean fluorescence resonance energy transfer efficiency values and line widths with increasing [Na⁺] are observed for the undocked species and can be interpreted with a Debye model in terms of electrostatic relaxation and increased flexibility in the RNA. Furthermore, we identify a 34 ± 2% fraction of freely diffusing RNA constructs remaining undocked even at saturating [Mg²⁺] levels, which agrees quantitatively with the 32 ± 1% fraction previously reported for immobilized constructs. This verifies that the kinetic heterogeneity observed in the docking rates is not the result of surface tethering. Finally, the K_D value and Hill coefficient for [Mg²⁺]-dependent docking decrease significantly for [Na⁺] = 25 mM vs. 125 mM, indicating Mg²⁺ and Na⁺ synergy in the RNA folding process.     

Complexation thermodynamics and the structure of the binary and the ternary complexes of Am, Cm and Eu with IDA and EDTA + IDA

The stability and the associated thermodynamic parameters of the binary and the ternary complexes of trivalent Am, Cm, and Eu with IDA and with EDTA + IDA, were determined by using a solvent extraction technique for aqueous solutions of I = 6.60 m (NaClO₄) at temperatures of 0-60 °C. The endothermic enthalpy and the positive entropy reflect the significant effect of dehydration in the formation of these complexes at high ionic strength. TRLFS and NMR (¹H and ¹³C) data helped to establish the structure of the ternary complexes in solution. In the ternary complex M(EDTA)(IDA)³⁻, EDTA binds via four carboxylates and two nitrogens, and IDA via two carboxylates and one nitrogen to the central Eu³⁺.     

Mononuclear and dinuclear mechanisms for catalysis of phosphodiester cleavage by alkaline earth metal ions in aqueous solution

In biological systems, enzymes often use metal ions, especially Mg²⁺, to catalyze phosphodiesterolysis, and model aqueous studies represent an important avenue of examining the contributions of these ions to catalysis. We have examined Mg²⁺ and Ca²⁺ catalyzed hydrolysis of the model phosphodiester thymidine-5′-p-nitrophenyl phosphate (T5PNP). At 25 °C, we find that, despite their different Lewis acidities, these ions have similar catalytic ability with second-order rate constants for attack of T5PNP by hydroxide (k_OH) of 4.1 × 10⁻⁴ M⁻¹s⁻¹ and 3.7 × 10⁻⁴ M⁻¹s⁻¹ in the presence of 0.30 M Mg²⁺ and Ca²⁺, respectively, compared to 8.3 × 10⁻⁷ M⁻¹s⁻¹ in the absence of divalent metal ion. Examining the dependence of k_OH on [M²⁺] at 50 °C indicates different kinetic mechanisms with Mg²⁺ utilizing a single ion mechanism and Ca²⁺ operating by parallel single and double ion mechanisms. Association of the metal ion(s) occurs prior to nucleophilic attack by hydroxide. Comparing the k_OH values reveals a single Mg²⁺ catalyzes the reaction by 1800-fold whereas a single Ca²⁺ ion catalyzes the reaction by only 90-fold. The second Ca²⁺ provides an additional 10-fold catalysis, significantly reducing the catalytic disparity between Mg²⁺ and Ca²⁺.     

Preparation, crystal structures and spectroscopic properties of novel [MCl3 − n(P)3 + n] (M = Co, Rh; n = 0, 1, 2 or 3) series of complexes containing tripodal tridentate phosphine, 1,1,1-tris(dimethylphosphinomethyl)ethane

Cobalt(III) and rhodium(III) complexes of the series of [M^IIICl_3 − n(P)_3 + n]ⁿ⁺ (M = Co or Rh; n = 0, 1, 2 or 3) have been prepared with the use of 1,1,1-tris(dimethylphosphinomethyl)ethane (tdmme) and mono- or didentate phosphines. The single-crystal X-ray analyses of both series of complexes revealed that the M-P and M-Cl bond lengths were dependent primarily on the strong trans influence of the phosphines, and secondarily on the steric congestion around the metal center resulting from the coordination of several phosphine groups. In fact, the M-P(tdmme) bonds became longer in the order of [MCl₃(tdmme)] < [MCl₂(tdmme)(PMe₃)]⁺ < [MCl(tdmme)(dmpe)]²⁺ (dmpe = 1,2-bis(dimethylphosphino)ethane) < [M(tdmme)₂]³⁺ for both Co^III and Rh^III series of complexes, while the M-Cl bond lengths were shortened in this order (except for [M(tdmme)₂]³⁺). Such a steric congestion around the metal center can also account for the structural and spectroscopic characteristics of the series of complexes, [MCl(tdmme)(dmpm, dmpe or dmpp)]²⁺ (dmpm = bis(dimethylphosphino)methane, dmpp = 1,3-bis(dimethylphosphino)propane). The X-ray analysis for [CoCl(tdmme)(dmpm or dmpe)](BF₄)₂ showed that all Co-P bonds in the dmpm complex were shorter by 0.03-0.04 Å than those in the dmpe complex. Furthermore, the first d-d transition energy of the Co^III complexes and the ¹J_Rh-P(tdmme) coupling constants observed for the Rh^III complexes indicated an unusual order in the coordination bond strengths of the didentate diphosphines, i.e., dmpm > dmpe > dmpp.     

Fe(III)–resorcylate as a spectrophotometric probe for phospholipid–cation interactions

A simple spectrophotometric microplate assay that allows quantification of the interaction between phospholipids and metal ions or other small cationic compounds has been developed. The assay is based on the competition of the phospholipids for the Fe³⁺ ion in the purple-colored Fe(III)–γ-resorcylate complex and for other cations. To compare the binding affinities of several cation–phospholipid interactions, K_0.5 values were derived from binding curves constructed by determination of the absorbance of the Fe(III)–γ-resorcylate at 490 nm as a function of the cation concentration. The assay was used to analyze the binding of lanthanide ions, calcium ions, and amines (hydrochlorides of ethanolamine, spermidine, and hexyltrimethylammonium chloride) to small unilamellar vesicles (SUVs) and mixed micelles containing anionic lipids such as phosphatidic acid and phosphatidyl-p-nitrophenol. The method was evaluated by fluorescence measurements with Eu³⁺ ions as tracer. Lanthanide ions such as La³⁺ and Ce³⁺ ions showed K_0.5 values smaller by one to two orders of magnitude compared with Ca²⁺ ions. In the presence of increasing amounts of detergents such as Triton X-100, the method also reflected transitions from SUVs to micelles. The binding capacity for metal ions was higher for phospholipid-containing micelles than for the corresponding SUVs.     

An Archaeal Dim2-Like Protein, aDim2p, Forms a Ternary Complex with a/eIF2α and the 3′ End Fragment of 16S rRNA

Dim2p is a eukaryal small ribosomal subunit RNA processing factor required for the maturation of 18S rRNA. Here we show that an archaeal homolog of Dim2p, aDim2p, forms a ternary complex with the archaeal homolog of eIF2α, a/eIF2α, and the RNA fragment that possesses the 3′ end sequence of 16S rRNA both in solution and in crystal. The 2.8-Å crystal structure of the ternary complex reveals that two KH domains of aDim2p, KH-1 and -2, are involved in binding the anti-Shine-Dalgarno core sequence (CCUCC-3′) and a highly conserved adjacent sequence (5′-GGAUCA), respectively, of the target rRNA fragment. The surface plasmon resonance results show that the interaction of aDim2p with the target rRNA fragment is very strong, with a dissociation constant of 9.8 × 10^− 10 M, and that aDim2p has a strong nucleotide sequence preference for the 3′ end sequence of 16S rRNA. On the other hand, aDim2p interacts with the isolated α subunit and the intact αβγ complex of a/eIF2, irrespective of the RNA binding. These results suggest that aDim2p is a possible archaeal pre-rRNA processing factor recognizing the 3′ end sequence (5′-GAUCACCUCC-3′) of 16S rRNA and may have multiple biological roles in vivo by interacting with other proteins such as a/eIF2 and aRio2p.     

Characterization of Saccharomyces cerevisiae Atm1p. Functional studies of an ABC7 type transporter

Saccharomyces cerevisiae Atm1p has been cloned, over-expressed and purified from a yeast expression system. The sequence includes both the soluble ATPase and transmembrane-spanning domains. With the introduction of an N-terminal Kozak sequence and a C-terminal (His)₆-tag, a yield of 1 mg of Atm1p was obtained from 3 g wet yeast cells, which is comparable to other membrane-associated proteins isolated from eukaryotic expression systems. The ATPase activity of Atm1p is sensitive to sodium vanadate, a P-type ATPase inhibitor, with an IC₅₀ of 4 μM. MgADP is a product inhibitor for Atm1p with an IC₅₀ of 0.9 mM. The Michaelis–Menten constants V_max, K_M and k_cat of Atm1p were measured as 8.7 ± 0.3 μM/min, 107 ± 16 μM and 1.24 ± 0.06 min^− 1, respectively. A plot of ATPase activity versus concentration of Atm1p exhibits a nonlinear relationship, suggesting an allosteric response and an important role for the transmembrane domain in mediating both ATP hydrolysis and MgADP release. The metal dependence of Atm1p ATPase activity demonstrated a reactivity order of Mg²⁺ > Mn²⁺ > Co²⁺, while each divalent ion was found to be inhibitory at higher concentrations. The activation and inhibitory effect of phospholipids suggest that formation of a lipid–micelle complex is important for enzymatic activity and stability. Structural analysis of Atm1p by CD spectroscopy suggested a similarity of secondary structure to that found for other members of this ABC protein family.     

Systemic lupus erythematosus: Molecular cloning of fourteen recombinant DNase monoclonal kappa light chains with different catalytic properties

Background

DNase antibodies can play an important role in the pathogenesis of different autoimmune pathologies.

Methods

An immunoglobulin light chain phagemid library derived from peripheral blood lymphocytes of patients with systemic lupus erythematosus (SLE) was used. The small pools of phage particles displaying DNA binding light chains with different for DNA were isolated by affinity chromatography on DNA-cellulose and the fraction eluted with 0.5 M NaCl was used for preparation of individual monoclonal light chains (MLChs, 28 kDa). Forty-five of 451 individual colonies were randomly chosen for a study of MLChs with DNase activity. The clones were expressed in Escherichia coli in a soluble form, and MLChs were purified by metal chelating chromatography followed by gel filtration, and studied in detail.

Results

Fifteen of 45 MLChs efficiently hydrolyzed DNA, and fourteen of them demonstrated various optimal concentrations of KCl or NaCl in a 1–100 mM range and showed one or two pH optima in a 4.8–9.1 range. All MLChs were dependent on divalent metal cations: the ratio of relative DNase activity in the presence of Mn^2 +, Ca^2 +, Mg^2 +, Ni^2 +, Zn^2 +, Cu^2 +, and Co^2 + was individual for each MLCh preparation. Fourteen MLChs demonstrated a comparable affinity for DNA (260–320 nM), but different k_cat values (0.02–0.7 min^− 1).

Conclusions

These observations suggest an extreme diversity of DNase abzymes from SLE patients.

General significance

SLE light chain repertoire can serve as a source of new types of DNases.