Purification and properties of three endo-beta-1,4-xylanases produced by Streptomyces sp. strain S38 which differ in their ability to enhance the bleaching of kraft pulps*(2)

In the presence of xylan, Streptomyces sp. strain S38 secretes three xylanases (Xyl1, Xyl2, and Xyl3) that were purified to protein homogeneity and characterized. When used in bleach boosting tests on kraft hardwood and softwood, Xyl1, a family-11 enzyme, was more effective than Xyl2 and Xyl3 that belonged to family-10. Xyl1 was fully responsible for the biodelignification potential of the culture supernatants with a minimal effective amount of 10 IU per gram of dry pulp for both softwood and hardwood pulp. Complete conventional CEDED bleaching sequences showed that enzymatic pretreatment (20 IU/g dry pulp) could result in active chlorine savings of 8.6 and 4.9 kg/ton of dry pulp with hardwood and softwood, respectively. The purified enzymes were totally devoid of cellulase activity on CM-cellulose and their activities were optimal at about 60 degrees C and pH 6. Moreover, the V(max) value of Xyl1 at 50 degrees C measured on birchwood xylan (5,700 μmoles/min/mg prot.) was significantly higher than those of Xyl2 and Xyl3 whereas their K(m) values were similar. Their half-lives at 50 degrees C were larger than 16 h but sharply decreased at 60 degrees C where the family-11 Xyl1 was less stable (t(1/2)(60 degrees C) = 10 min) than both family-10 enzymes Xyl2 (t(1/2)(60 degrees C) = 30 min) and Xyl3 (t(1/2)(60 degrees C) = 70 min).     

A novel thermostable xylanase from Thermomonospora sp.: influence of additives on thermostability

An alkalothermophilic Thermomonospora sp. producing high levels of xylanase was isolated from self-heating compost. The culture produced 125 IU/ml of xylanase when grown in shake flasks at pH 9 and 50 degrees C for 96 h. The culture filtrate also contained cellulase (23 IU/ml), mannanase (1 IU/ml) and beta-xylosidase (0.1 IU/ml) activities. The xylanase was active at a broad range of pH (5-9) and temperature (40-90 degrees C). The optimum pH and temperature were 7 and 70 degrees C, respectively. The enzyme was stable in the pH range 5-8 and was thermostable with half-lives of 8 and 4 h at 60 degrees C and 70 degrees C, respectively, but only 9 min at 80 degrees C. The effects of a variety of compounds to enhance the stability of xylanase at 80 degrees C was studied. Addition of sorbitol, mannitol and glycerol increased the thermostability of xylanase in proportion to the number of hydroxyl groups per polyol molecule. Glycine also offered protection against thermoinactivation. Xylan, trehalose, gelatin and trehalose-gelatin mixture had marginal effect on the thermostability of xylanase at 80 degrees C.     

Characterization of xylanase from Lentinus edodes M290 cultured on waste mushroom logs

Extracellular enzymes from Lentinus edodes M290 on normal woods (Quercus mongolica) and waste logs from oak mushroom production were comparatively investigated. Endoglucanase, cellobiohydrolase, beta-glucosidase, and xylanase activities were higher on waste mushroom logs than on normal woods after L. edodes M290 inoculation. Xylanase activity was especially different, with a three times higher activity on waste mushroom logs. When the waste mushroom logs were used as a carbon source, a new 35 kDa protein appeared. After the purification, the optimal pH and temperature for xylanase activity were determined to be 4.0 and 50 degrees C, respectively. More than 50% of the optimal xylanase activity was retained when the temperature was increased from 20 to 60 degrees C, after a 240 min reaction. At 40 degrees C, the xylanase maintained 93% of the optimal activity, after a 240 min reaction. The purified xylanase showed a very high homology to the xylanase family 10 from Aspergillus terreus by LC/MS-MS analysis. The highest Xcorr (1.737) was obtained from the peptide KWI SQGIPIDGIG SQTHLGSGGS WTVK originated from Aspergillus terreus, indicating that the 35 kDa protein was xylanase. This protein showed low homology to a previously reported L. edodes xylanase sequence.     

Biphenyl uptake by psychrotolerant Pseudomonas sp. strain Cam-1 and mesophilic Burkholderia sp. strain LB400

We investigated the uptake of biphenyl by the psychrotolerant, polychlorinated biphenyl (PCB)-degrader, Pseudomonas sp. strain Cam-1 and the mesophilic PCB-degrader, Burkholderia sp. strain LB400. The effects of growth substrates, metabolic inhibitors, and temperature on [14C]biphenyl uptake were studied. Biphenyl uptake by both strains was induced by growth on biphenyl, and was inhibited by dinitrophenol (DNP) and carbonyl cyanide m-chlorophenylhydrazone (CCCP), which are metabolic uncouplers. The Vmax and Km for biphenyl uptake by Cam-1 at 22 degrees C were 5.4 +/- 1.7 nmol x min(-1) x (mg of cell protein)(-1) and 83.1 +/- 15.9 micromol x L(-1), respectively. The Vmax and Km for biphenyl uptake by LB400 at 22 degrees C were 3.2 +/- 0.3 nmol x min(-1) x (mg of cell protein(-1)) and 51.5 +/- 9.6 micromol x L(-1), respectively. At 15 degrees C, the maximum rate for biphenyl uptake by Cam-1 and LB400 was 3.1 +/- 0.3 nmol x min(-1) x (mg of cell protein)(-1) and 0.89 +/- 0.1 nmol x min(-1) x (mg of cell protein)(-1), respectively. Thus, the maximum rate for biphenyl uptake by Cam-1 at 15 degrees C was more than 3 times higher than that for LB400.     

Immobilization of Neocallimastix patriciarum xylanase on artificial oil bodies and statistical optimization of enzyme activity

A thermally stable and alkalophilic xylanase, XynCDBFV, from Neocallimastix patriciarum was overexpressed in Escherichia coli as a recombinant protein fused to the N-terminus of oleosin, a unique structural protein of seed oil bodies. As a result of the reconstitution of the artificial oil bodies (AOBs), the immobilization of active xylanase was accomplished. Response surface methodology (RSM) was employed for the optimization of the immobilized xylanase activity. The central composite design (CCD) and regression analysis methods were effective for determination of optimized temperature and pH conditions for the AOB-immobilized XynCDBFV. The optimal condition for the highest immobilized xylanase activity (3.93IU/mg of total protein) was observed at 59 degrees C and pH 6.0. Further, AOB-immobilized XynCDBFV retained 50% of its maximal activity after 120min at 60 degrees C, and it could be easily and simply recovered from the surface of the solution by brief centrifugation, and could be reused eight times while retaining more than 60% of its activity. These results proved it is a simple and effective method for direct immobilization of xylanases.     

Distinct human prolactin (hPRL) and growth hormone (hGH) behavior under bacteriophage lambda PL promoter control: temperature plays a major role in protein yields

When producing recombinant protein for therapy, it is desirable not only to obtain substantial amounts of the protein, but also to make sure that potential contaminants such as inducing agents are not present in the final product. To prevent this, one can use expression systems in which the promoter (lambdaP(L)) is activated by a temperature shift that denatures a repressor (e.g., cIts). In this manner, hGH was successfully expressed and secreted in Escherichia coli periplasm, with specific yields well above 1 microg ml(-1) A(600)(-1), after a temperature shift from 30 to 42 degrees C. However, attempts to express a related hormone, human prolactin, employing the same protocol were unsuccessful, providing 0.03 microg ml(-1) A(600)(-1) at the most. A process is described in which this labile protein is obtained from a cIts(-) strain under optimized temperature condition (37 degrees C). The highest periplasmic secretions of prolactin ever reported were thus obtained: 0.92+/-0.10 microg ml(-1) A(600)(-1) at an optical density of approximately 3 A(600) units in shake flask cultures and approximately 1 microg ml(-1) A(600)(-1), at an OD of 35 A(600) units, via a rapid and flexible batch feed process in laboratory bioreactor. Purified hPRL was monomeric, correctly processed (Mr=22,906), properly folded and bioactive (51.5+/-24.1 IU mg(-1)).     

Draw-fill batch culture mode for production of xylanases by <Emphasis Type="Italic">Cellulomonas flavigena</Emphasis> on sugar cane bagasse

Draw-fill culture was evaluated as a method for xylanase production by Cellulomonas flavigena on sugar cane bagasse. Specific xylanase activity and volumetric xylanase activities were measured by harvesting 50%, 55%, 60% and 70% of fermented broth at the end of each subculture. Maximum specific (64 IU mg(-1) protein) and volumetric (166 IU ml(-1)) xylanase activities were obtained by harvesting 50-55% of broth. Values were 3.4 and 3.8 times greater than those obtained in batch cultures carried out under the same conditions. Enzyme productivity of 4.2 IU ml(-1) h(-1) was significantly greater than that obtained in continuous cultures (2.4 IU ml(-1) h(-1)) (P<0.05).     

Cloning of <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> Xylanase Gene and Characterization of Recombinant Enzyme

Hemicellulose is a major component of lignocellulose biomass. Complete degradation of this substrate requires several different enzymatic activities, including xylanase. We isolated a strain of Bacillus licheniformis from a hot springs environment that exhibited xylanase activity. A gene encoding a 23-kDa xylanase enzyme, Xyn11, was cloned, and the recombinant protein was expressed in an Escherichia coli host and biochemically characterized. The optimum activity of the enzyme was at pH 5-7 and 40-50 degrees C. The enzyme was stable at temperatures up to 50 degrees C. Against birchwood xylan, the enzyme had an apparent K ( m ) of 6.7 mg/mL and V (max) of 379 mumol/min/mg.     

A family 11 xylanase from Penicillium funiculosum is strongly inhibited by three wheat xylanase inhibitors

Steady-state kinetic approaches were used to investigate the binding of a novel Penicillium funiculosum xylanase, XYNC, with three known xylanase inhibitor proteins from wheat (Triticum aestivum). The xylanase gene (xynC) was cloned from a P. funiculosum genomic library and the deduced amino acid sequence of XYNC exhibited high sequence similarity with fungal family 11 xylanases. xynC was overexpressed in P. funiculosum and the product (XYNC: M(r)=23.6 kDa; pI=3.7) purified and shown to efficiently degrade birchwood xylan [K(m)=0.47% w/v, Vmax=2540 micromol xylose min(-1) (mg protein)(-1) at pH 5.5 and 30 degrees C] and soluble wheat arabinoxylans [K(m)=1.45% w/v, Vmax=7190 micromol xylose min(-1) mg protein)(-1) at pH 5.5 and 30 degrees C]. The xylanase activity of XYNC was inhibited strongly by three xylanase inhibitor proteins from wheat; XIP-I, TAXI I and TAXI II. The inhibition for each was competitive, with very tight binding (K(i)=3.4, 16 and 17 nM, respectively) equivalent to free energy changes (deltaG degrees ) of -49, -45 and -45 kJ mol(-1). This is the first report describing a xylanase that is inhibited by all three wheat xylanase inhibitor proteins described to date.     

High level expression of a recombinant xylanase by Pichia pastoris NC38 in a 5 L fermenter and its efficiency in biobleaching of bagasse pulp

A genetically modified XynA gene from Thermomyces lanuginosus was expressed in Pichia pastoris under the control of GAP promoter. P. pastoris expressed greater levels of xylanase (160 IU ml(-1)) on BMGY medium without zeocin after 56 h. The xylanase production by recombinant P. pastoris was scaled up in a 5L fermenter containing 1% glycerol and the highest xylanase production of 139 IU ml(-1) was observed after 72 h. Further studies carried out in fermenter under controlled pH (5.5) yielded a maximum xylanase production of 177 IU ml(-1) after 72 h. The biobleaching efficacy of crude xylanase was also evaluated on bagasse pulp and a brightness of 47.4% was observed with 50 IU of crude xylanase used per gram of pulp, which was 2.1 points higher in brightness than the untreated samples. Reducing sugars (24.8 mg g(-1)) and UV absorbing lignin-derived compounds values were considerably higher with xylanase treated samples.     

High-level expression, purification, and characterization of recombinant wheat xylanase inhibitor TAXI-I secreted by the yeast Pichia pastoris

Triticum aestivum xylanase inhibitor I (TAXI-I) is a wheat protein that inhibits microbial xylanases belonging to glycoside hydrolase family 11. In the present study, recombinant TAXI-I (rTAXI-I) was successfully produced by the methylotrophic yeast Pichia pastoris at high expression levels (approximately 75 mg/L). The rTAXI-I protein was purified from the P. pastoris culture medium using cation exchange and gel filtration chromatographic steps. rTAXI-I has an iso-electric point of at least 9.3 and a mass spectrometry molecular mass of 42,013 Da indicative of one N-linked glycosylation. The recombinant protein fold was confirmed by circular dichroism spectroscopy. Xylanase inhibition by rTAXI-I was optimal at 20-30 degrees C and at pH 5.0. rTAXI-I still showed xylanase inhibition activity at 30 degrees C after a 40 min pre-incubation step at temperatures between 4 and 70 degrees C and after 2 h pre-incubation at room temperature at a pH ranging from 3.0 to 12.0, respectively. All tested glycoside hydrolase family 11 xylanases were inhibited by rTAXI-I whereas those belonging to family 10 were not. Specific inhibition activities against family 11 Aspergillus niger and Bacillus subtilis xylanases were 3570 and 2940IU/mg protein, respectively. The obtained biochemical characteristics of rTAXI-I produced by P. pastoris (no proteolytical cleft) were similar to those of natural TAXI-I (mixture of proteolytically processed and non-processed forms) and non-glycosylated rTAXI-I expressed in Escherichia coli. The present results show that xylanase inhibition activity of TAXI-I is only affected to a limited degree by its glycosylation or proteolytic processing.     

Thermal stability of beta-xylanases produced by different Thermomyces lanuginosus strains

The thermostability of beta-xylanases produced by nine thermophilic Thermomyces lanuginosus strains in a coarse corn cob medium was assessed. The xylanase produced by T. lanuginosus strain SSBP retained 100% of its activity after 6 h at temperatures up to 65 degrees C. In comparison seven ATCC strains and the DSM 5826 strain of T. lanuginosus only retained 100% xylanase activity at temperatures up to 60 degrees C. Culture filtrates of T. lanuginosus strain SSBP grown on coarse corn cobs, oatspelts xylan, birchwood xylan, wheatbran, locust beangum, and sugar cane bagasse, retained 100% xylanase activity at temperatures up to 60 degrees C. The xylanase produced on corn cobs was the most thermostable and showed an increase of approximately 6% from 70 degrees C to 80 degrees C. The T(1/2) of all strains at 70 degrees C at pH 6.5 varied greatly from 63 min for strain ATCC 28083 to 340 min for strain SSBP. The xylanase of strain SSBP was much less thermostable at pH 5.0 and pH 12.0 with T(1/2) values of 11.5 min and 15 min, respectively at 70 degrees C. At 50 degrees C, the enzyme of T. lanuginosus strain SSBP produced on coarse corn cobs was stable within the pH range of 5.5-10.0. Furthermore, the enzyme retained total activity at 60 degrees C for over 14 days and at 65 degrees C for over 48 h. The xylanase of T. lanuginosus strain SSBP possesses thermo- and pH stability properties that may be attractive to industrial application.     

Purification and characterization of extracellular xylanase from Streptomyces cyaneus SN32

Streptomyces cyaneus SN32 was used in this study to produce extracellular xylanase, an important industrial enzyme used in pulp and paper industry. The enzyme was purified to homogeneity by ammonium sulfate precipitation followed by anion exchange chromatography using DEAE-Sepharose column, with 43.0% yield. The enzyme was found to be a monomer of 20.5 kDa as determined by SDS gel electrophoresis and has a pI of 8.5. The optimum pH and temperature for purified xylanase activity was 6.0 and 60-65 degrees C, respectively. The half-lives of xylanase at 50 and 65 degrees C were approximately 200 and 50 min, respectively. The xylanase exhibited K(m) and V(max) values of 11.1 mg/ml and 45.45 micromol/min/mg. The 15 residue N-terminal sequence of the enzyme was found to be 87% identical up to that of endoxylanases from Steptomyces sp. Based on the zymogram analysis, sequence similarity and other characteristics, it is proposed that the purified enzyme from S. cyaneus SN32 is an endoxylanase and belongs to Group 1 xylanases (low molecular weight - basic proteins). The purified enzyme was stable for more than 20 week at 4 degrees C. Easy purification from the fermentation broth and its high stability will be highly useful for industrial application of this endoxylanase.     

Exploiting the combined effects of high pressure and moderate heat with nisin on inactivation of Clostridium botulinum spores

In the present work, we studied the combined effects of pressure (300.0-700.0 MPa), temperature (30-70 degrees C) and the presence of nisin (0-333 IU/ml) on the inactivation of Clostridium botulinum 33A spores at various pressure holding times (7.5-17.5 min). Moreover, response surface methodology (RSM) was employed and a quadratic equation for HPP and nisin-induced inactivation was built with RSM. By analyzing the response surface plots and their corresponding contour plots as well as solving the quadratic equation, the experimental values were shown to be significantly in good agreement with predicted values because the adjusted determination coefficient (R(Adj)(2)) was 0.9261 and the level of significance was P<0.0001. The optimum process parameters for a six-log cycle reduction of C. botulinum spores were obtained as: pressure, 545.0 MPa; temperature, 51 degrees C; pressure holding time, 13.3 min; and nisin concentration, 129 IU/ml. The adequacy of the model equation for predicting the optimum response values was verified effectively for 10 test points. Compared to conventional high pressure processing (HPP) techniques, the main process advantages of HPP-nisin combination sterilization in the UHT milk are, lower pressure, natural preservative (nisin), and temperature in a shorter treatment time.     

Purification and kinetics of a raw starch-hydrolyzing,thermostable, and neutral glucoamylase of the thermophilic mold Thermomucor indicae-seudaticae

The purified glucoamylase of the thermophilic mold Thermomucor indicae-seudaticaehad a molecular mass of 42 kDa with a pI of 8.2. It is a glycoprotein with 9-10.5% carbohydrate content, which acted optimally at 60 degrees C and pH 7.0, with a t(1/2) of 12 h at 60 degrees C and 7 h at 80 degrees C. Its experimental activation energy was 43 KJ mol(-1) with temperature quotient (Q(10)) of 1.35, while the values predicted by response surface methodology (RSM) were 43 KJ mol(-1) and 1.28, respectively. The enzyme hydrolyzed soluble starch at 50 degrees C (K(m) 0.50 mg mL(-1) and V(max) 109 micromol mg(-1) protein min(-1)) and at 60 degrees C (K(m) 0.40 and V(max) 143 micromol mg(-1) protein min(-1)). The experimental K(m) and V(max) values are in agreement with the predicted values at 50 degrees C (K(m) 0.45 mg mL(-1) and V(max) 111.11 micromol mg(-1) protein min(-1)) and at 60 degrees C (K(m) 0.36 mg mL(-1)and V(max) 142.85 micromol mg(-1) protein min(-1)). An Arrhenius plot indicated thermal activation up to 60 degrees C, and thereafter, inactivation. The enzyme was strongly stimulated by Co(2+), Fe(2+), Ag(2+), and Ca(2+), slightly stimulated by Cu(2+) and Mg(2+), and inhibited by Hg(2+), Zn(2+), Ni(2+), and Mn(2+). Among additives, dextran and trehalose slightly enhanced the activity. Glucoamylase activity was inhibited by EDTA, beta-mercaptoethanol, dithiothreitol, and n-bromosuccinimide, and n-ethylmaleimide inhibited its activity completely. This suggested the involvement of tryptophan and cysteine in catalytic activity and the critical role of disulfide linkages in maintaining the conformation of the enzyme. The enzyme hydrolyzed around 82% of soluble starch and 65% of raw starch (K(m) 2.4 mg mL(-1), V(max) 50 micromol mg(-1) protein min(-1)), and it was remarkably insensitive to glucose, suggesting its applicability in starch saccharification.     

Purification and characterization of xylanases from<Emphasis Type="Italic">Aspergillus giganteus</Emphasis>

A strain of Aspergillus giganteus cultivated in a medium with xylan produced two xylanases (xylanase I and II) which were purified to homogeneity. Their molar mass, estimated by SDS-PAGE, were 21 and 24 kDa, respectively. Both enzymes are glycoproteins with 50 degrees C temperature optimum; optimum pH was 6.0-6.5 for xylanase I and 6.0 for xylanase II. At 50 degrees C xylanase I exhibited higher thermostability than xylanase II. Hg2+, Cu2+ and SDS were strong inhibitors, 1,4-dithiothreitol stimulated the reaction of both enzymes. Both xylanases are xylan-specific; kinetic parameters indicated higher efficiency in the hydrolysis of oat spelts xylan. In hydrolysis of this substrate, xylotriose, xylotetraose and larger xylooligosaccharides were released and hence the enzymes were classified as endoxylanases.     

Cloning, expression, and characterization of a new xylanase with broad temperature adaptability from Streptomyces sp. S9

A new xylanase gene, xynAS9, was cloned from Streptomyces sp. S9, which was isolated from Turpan Basin, China. The full-length gene consists of 1,395 bp and encodes 465 amino acids including 38 residues of a putative signal peptide. The overall amino acid sequence shares the highest identity (50.8%) with a putative endo-1,4-beta-xylanase from Streptomyces avermitilis of the glycoside hydrolase family 10. The gene fragment encoding the mature xylanase was expressed in Escherichia coli BL21 (DE3). The recombinant protein was purified to electrophoretic homogeneity and subsequently characterized. The optimal pH and temperature for the recombinant enzyme were 6.5 and 60 degrees C, respectively. The enzyme showed broad temperature adaptability, retaining more than 65% of the maximum activity when assayed at 50-80 degrees C. The enzyme also had good thermal and pH stability. The K (m) values for oat spelt xylan and birchwood xylan substrates were 2.85 and 2.43 mg ml(-1), with the V (max) values of 772.20 and 490.87 mumol min(-1) mg(-1), respectively. The hydrolysis products of xylan were mainly xylose and xylobiose. These favorable properties should make XynAS9 a good candidate in various industrial applications.     

Properties and application of a partially purified alkaline xylanase from an alkalophilic fungus Aspergillus nidulans KK-99

An alkalophilic Aspergillus nidulans KK-99 produced an alkaline, thermostable xylanase (40 IU/ml) in a basal medium supplemented with wheat bran (2% w/v) and KNO3 (at 0.15% N) pH 10.0 and 37 degrees C. The partially purified xylanase was optimally active at pH 8.0 and 55 degrees C. The xylanase was stable in a broad pH range of 4.0-9.5 for 1 h at 55 degrees C, retaining more than 80% of its activity. The enzyme exhibited greater binding affinity for xylan from hardwood than from softwood. The xylanase activity was stimulated (+25%) by Na+ and Fe2+ and was strongly inhibited (maximum by 70%) by Tween-20, 40, 60, SDS, acetic anhydride, phenylmethane sulphonyl fluoride, Triton-X-100. The xylanase dose of 1.0 IU/g dry weight pulp gave optimum bleach boosting of Kraft pulp at pH 8.0 and temperature 55 degrees C for 3 h reaction time.     

Xylanase and Mannanase enzymes from Streptomyces galbus NR and their use in biobleaching of softwood kraft pulp

Enzymatic pretreatment of softwood kraft pulp was investigated using xylanase and mannanase, singly or in combination, either sequentially or simultaneously. Enzymes were obtained from Streptomyces galbus NR that had been cultivated in a medium, containing either xylan of sugar cane bagasse or galactomannan of palm-seeds, when they were used as sole carbon sources from local wastes in fermentation media. No cellulase activity was detected. Incubation period, temperature, initial pH values and nature of nutritive constituents were investigated. Optimum production of both enzymes was achieved after 5 days incubation on a rotary shaker (200 rpm) at 35 degrees C and initial pH 7.0. Partial purification of xylanase and mannanase in the cultures supernatant were achieved by salting out at 40-60 and 60-80% ammonium sulphate saturation with a purification of 9.63- and 8.71-fold and 68.80 and 62.79% recovery, respectively. The xylanase and mannanase from S. galbus NR have optimal activity at 50 and 40 degrees C, respectively. Both enzymes were stable at a temperature up to 50 degrees C. Xylanase and mannanase showed highest activity at pH 6.5 and were stable from 5.0 to 8.0 and from 5.5 to 7.5, respectively. The partial purified enzymes preparations of xylanase and mannanase enzymes showed high bleaching activity, which is an important consideration for industry. Xylanase was found to be more effective for paper-bleaching than mannanase. When xylanase and mannanase were dosed together (simultaneously), both enzymes were able to enhance the liberation of reducing sugars and improve pulp bleachability, possibly as a result of nearly additive interactions. The simultaneous addition of both enzymes was more effective in pulp treatment than their sequential addition.     

Desulfobacter psychrotolerans sp. nov., a new psychrotolerant sulfate-reducing bacterium and descriptions of its physiological response to temperature changes

A psychrotrolerant acetate-oxidizing sulfate-reducing bacterium (strain akvb(T)) was isolated from sediment from the northern part of The North Sea with annual temperature fluctuations between 8 and 14 degrees C. Of the various substrates tested, strain akvb(T) grew exclusively by the oxidation of acetate coupled to the reduction of sulfate. The cells were motile, thick rods with round ends and grew in dense aggregates. Strain akvb(T) grew at temperatures ranging from -3.6 to 26.3 degrees C. Optimal growth was observed at 20 degrees C. The highest cell specific sulfate reduction rate of 6.2 fmol cell(-1) d(-1) determined by the (35)SO(2-)(40) method was measured at 26 degrees C. The temperature range of short-term sulfate reduction rates exceeded the temperature range of growth by 5 degrees C. The Arrhenius relationship for the temperature dependence of growth and sulfate reduction was linear, with two distinct slopes below the optimum temperatures of both processes. The critical temperature was 6.4 degrees C. The highest growth yield (4.3-4.5 g dry weight mol(-1) acetate) was determined at temperatures between 5 and 15 degrees C. The cellular fatty acid composition was determined with cultures grown at 4 and 20 degrees C, respectively. The relative proportion of cellular unsaturated fatty acids (e.g. 16:1omega7c) was higher in cells grown at 4 degrees C than in cells grown at 20 degrees C. The physiological responses to temperature changes showed that strain akvb(T) was well adapted to the temperature regime of the environment from which it was isolated. Phylogenetic analysis showed that strain akvb(T) is closest related to Desulfobacter hydrogenophilus, with a 16S rRNA gene sequence similarity of 98.6%. DNA-DNA-hybridization showed a similarity of 32% between D. hydrogenophilus and strain akvb(T). Based on phenotypic and DNA-based characteristics we propose that strain akvb(T) is a member of a new species, Desulfobacter psychrotolerans sp. nov.