Structure of a loose dimer: an intermediate in nitric oxide synthase assembly

Cooperativity among ligand binding, subunit association, and protein folding has implications for enzyme regulation as well as protein aggregation events associated with disease. The binding of substrate l-arginine or cofactor tetrahydrobiopterin converts nitric oxide synthases (NOSs) from a "loose dimer", with an exposed active center and higher sensitivity to proteolysis, to a "tight dimer" competent for catalysis. The crystallographic structure of the Bacillus subtilis NOS loose dimer shows an altered association state with severely destabilized subdomains. Ligand binding or heme reduction converts loose dimers to tight dimers in solution and crystals. Mutations at key positions in the dimer interface that distinguish prokaryotic from eukaryotic NOSs affect the propensity to form loose dimers. The loose dimer structure indicates that non-native interactions can mediate subunit association in NOS.     

Distinct dimer interaction and regulation in nitric-oxide synthase types I,II, and III

Homodimer formation activates all nitric-oxide synthases (NOSs). It involves the interaction between two oxygenase domains (NOSoxy) that each bind heme and (6R)-tetrahydrobiopterin (H4B) and catalyze NO synthesis from L-Arg. Here we compared three NOSoxy isozymes regarding dimer strength, interface composition, and the ability of L-Arg and H4B to stabilize the dimer, promote its formation, and protect it from proteolysis. Urea dissociation studies indicated that the relative dimer strengths were NOSIIIoxy > NOSIoxy > NOSIIoxy (endothelial NOSoxy (eNOSoxy) > neuronal NOSOXY (nNOSoxy) > inducible NOSoxy (iNOSoxy)). Dimer strengths of the full-length NOSs had the same rank order as judged by their urea-induced loss of NO synthesis activity. NOSoxy dimers containing L-Arg plus H4B exhibited the greatest resistance to urea-induced dissociation followed by those containing either molecule and then by those containing neither. Analysis of crystallographic structures of eNOSoxy and iNOSoxy dimers showed more intersubunit contacts and buried surface area in the dimer interface of eNOSoxy than iNOSoxy, thus revealing a potential basis for their different stabilities. L-Arg plus H4B promoted dimerization of urea-generated iNOSoxy and nNOSoxy monomers, which otherwise was minimal in their absence, and also protected both dimers against trypsin proteolysis. In these respects, L-Arg alone was more effective than H4B alone for nNOSoxy, whereas for iNOSoxy the converse was true. The eNOSoxy dimer was insensitive to proteolysis under all conditions. Our results indicate that the three NOS isozymes, despite their general structural similarity, differ markedly in their strengths, interfaces, and in how L-Arg and H4B influence their formation and stability. These distinguishing features may provide a basis for selective control and likely help to regulate each NOS in its particular biologic milieu.     

The N-terminal tails of the H2A-H2B histones affect dimer structure and stability

The histone proteins of the core nucleosome are highly basic and form heterodimers in a "handshake motif." The N-terminal tails of the histones extend beyond the canonical histone fold of the hand-shake motif and are the sites of posttranslational modifications, including lysine acetylations and serine phosphorylations, which influence chromatin structure and activity as well as alter the charge state of the tails. However, it is not well understood if these modifications are signals for recruitment of other cellular factors or if the removal of net positive charge from the N-terminal tail plays a role in the overall structure of chromatin. To elucidate the effects of the N-terminal tails on the structure and stability of histones, the highly charged N-terminal tails were truncated from the H2A and H2B histones. Three mutant dimers were studied: DeltaN-H2A/WT H2B; WT H2A/DeltaN-H2B, and DeltaN-H2A/DeltaN-H2B. The CD spectra, stabilities to urea-denaturation, and the salt-dependent stabilization of the three truncated dimers were compared with those of the wild-type dimer. The data support four conclusions regarding the effects of the N-terminal tails of H2A and H2B: (1) Removal of the N-terminal tails of H2A and H2B enhance the helical structure of the mutant heterodimers. (2) Relative to the full-length WT heterodimer, the DeltaN-H2A/WT H2B dimer is destabilized, while the WT H2A/DeltaN-H2B and DeltaN-H2A/DeltaN-H2B dimers are slightly stabilized. (3) The truncated dimers exhibit decreased m values, relative to the WT dimer, supporting the hypothesis that the N-terminal tails in the isolated dimer adopt a collapsed structure. (4) Electrostatic repulsion in the N-terminal tails decreases the stability of the H2A-H2B dimer.     

Control of nitric oxide synthase dimer assembly by a heme-NO-dependent mechanism

Homodimer formation is a key step that follows heme incorporation during assembly of an active inducible nitric oxide synthase (iNOS). In cells, heme incorporation into iNOS becomes limited due to interaction between self-generated NO and cellular heme [Albakri, Q., and Stuehr, D. J. (1996) J. Biol. Chem. 271, 5414-5421]. Here we investigated if NO can regulate at points downstream in the process by inhibiting dimerization of heme-containing iNOS monomer. Heme-containing monomers were generated by treating iNOS dimer or iNOS oxygenase domain dimer (iNOSoxy) with urea. Both monomers dimerized when incubated with Arg and 6R-tetrahydrobiopterin (H4B), as shown previously [Abu-Soud, H. M., Loftus, M., and Stuehr, D. J. (1995) Biochemistry 34, 11167-11175]. The NO-releasing drug S-nitrosyl-N-acetyl-D,L-penicillamine (SNAP; 0-0.5 mM) inhibited dimerization of iNOS monomer in a dose- and time-dependent manner, without causing heme release. SNAP-pretreated monomer also did not dimerize in response to H4B plus Arg. SNAP converted Arg- and H4B-free iNOS dimer into monomer that could not redimerize, but had no effect on iNOS dimer preincubated with Arg and H4B. Anaerobic spectral analysis showed that NO from SNAP bound to the ferric heme of iNOSoxy monomer or dimer. Adding imidazole as an alternative heme ligand prevented SNAP from inhibiting iNOS monomer dimerization. We conclude that NO and related species can block iNOS dimerization at points downstream from heme incorporation. The damage to heme-containing monomer results from a reaction with the protein and appears irreversible. Although dimeric structure alone does not protect, it does enable Arg and H4B to bind and protect. Inhibition appears mediated by NO coordinating to the ferric heme iron of the monomer.     

G Protein betagamma dimer formation: Gbeta and Ggamma differentially determine efficiency of in vitro dimer formation

The Gbeta and Ggamma subunit of the heterotrimeric G proteins form a functional dimer that is stable once assembled in vivo or in vitro. The requirements, mechanism, and specificity of dimer formation are still incompletely understood, but represent important biochemical processes involved in the specificity of cellular signaling through G proteins. Here, seven Gbeta and 12 FLAG-epitope-tagged Ggamma subunits were separately synthesized in vitro using a rabbit reticulocyte lysate expression system. The translation products were combined and dimers isolated by immunoprecipitation. Gbeta1 and Gbeta4 formed dimers with all Ggamma subunit isoforms, generally with Gbeta/Ggamma stoichiometries between 0.2:1 and 0.5:1. Gbeta5, Gbeta5L, and Gbeta3s did not form significant amounts of dimer with any of the gamma subunit isoforms. Gbeta2 and Gbeta3 formed dimers with selected Ggamma isoforms to levels intermediate between that of Gbeta1/Gbeta4 and Gbeta3s/Gbeta5/Gbeta5L. We also expressed selected Gbetagamma in HEK293 cells and measured PLCbeta2 activity. Gbetagamma dimer-dependent increases in IP3 production were seen with most Gbeta1, Gbeta2, and Gbeta5 combinations, indicating functional dimer expression in intact cells. These results define the complete set of G protein betagamma dimers that are formed using a single biochemical assay method and suggest that there are Gbeta isoform-specific factors in rabbit reticulocyte lysates that determine the efficacy of Gbetagamma dimer formation.     

Heme reduction by intramolecular electron transfer in cysteine mutant myoglobin under carbon monoxide atmosphere

Human myoglobin (Mb) possesses a unique cysteine (Cys110), whereas other mammalian Mbs do not. To investigate the effect of a cysteine residue on Mb, we introduced cysteine to various sites on the surface of sperm whale Mb (K56C, V66C, K96C, K102C, A125C, and A144C) by mutation. The cysteines were inserted near the end of alpha-helices, except for V66C, where the cysteine was introduced in the middle of an alpha-helix. Reduction of the heme was observed for each mutant metMb by incubation at 37 degrees C under carbon monoxide atmosphere, which was much faster than reduction of wild-type metMb under the same condition. Heme reduction did not occur significantly under nitrogen or oxygen atmospheres. The rate constant for heme reduction increased for higher mutant Mb concentration, whereas it did not change significantly when the CO concentration was reduced from 100% CO to 50% CO with 50% O(2). The similarity in the rate constants with different CO concentrations indicates that CO stabilizes the reduced heme by coordination to the heme iron. SDS-PAGE analysis showed that mutant Mb dimers were formed by incubation under CO atmosphere but not under air. These dimers were converted back to Mb monomers by an addition of 2-mercaptoethanol, which showed formation of a Mb dimer through a disulfide bond. The rate constant decreased in general as the heme-cysteine distance was increased, although V66C Mb exhibited a very small rate constant. Since V66 is placed in the middle of an alpha-helix, steric hindrance would occur and prevent formation of a dimer when the cysteine residues of two different V66C Mb molecules interact with each other. The rate constants also decreased for K56C and A144C Mbs presumably because of the electrostatic repulsion during dimer formation, since they are relatively charged around the inserted cysteine.     

An artemisinin-derived dimer has highly potent anti-cytomegalovirus (CMV) and anti-cancer activities

We recently reported that two artemisinin-derived dimers (dimer primary alcohol 606 and dimer sulfone 4-carbamate 832-4) are significantly more potent in inhibiting human cytomegalovirus (CMV) replication than artemisinin-derived monomers. In our continued evaluation of the activities of artemisinins in CMV inhibition, twelve artemisinin-derived dimers and five artemisinin-derived monomers were used. Dimers as a group were found to be potent inhibitors of CMV replication. Comparison of CMV inhibition and the slope parameter of dimers and monomers suggest that dimers are distinct in their anti-CMV activities. A deoxy dimer (574), lacking the endoperoxide bridge, did not have any effect on CMV replication, suggesting a role for the endoperoxide bridge in CMV inhibition. Differences in anti-CMV activity were observed among three structural analogs of dimer sulfone 4-carbamate 832-4 indicating that the exact placement and oxidation state of the sulfur atom may contribute to its anti-CMV activity. Of all tested dimers, artemisinin-derived diphenyl phosphate dimer 838 proved to be the most potent inhibitor of CMV replication, with a selectivity index of approximately 1500, compared to our previously reported dimer sulfone 4-carbamate 832-4 with a selectivity index of about 900. Diphenyl phosphate dimer 838 was highly active against a Ganciclovir-resistant CMV strain and was also the most active dimer in inhibition of cancer cell growth. Thus, diphenyl phosphate dimer 838 may represent a lead for development of a highly potent and safe anti-CMV compound.     

The conformational feasibility for the formation of reaching dimer in ASV and HIV integrase: a molecular dynamics study

Retroviral integrases are reported to form alternate dimer assemblies like the core–core dimer and reaching dimer. The core–core dimer is stabilized predominantly by an extensive interface between two catalytic core domains. The reaching dimer is stabilized by N-terminal domains that reach to form intermolecular interfaces with the other subunit’s core and C-terminal domains (CTD), as well as CTD–CTD interactions. In this study, molecular dynamics (MD), Brownian dynamics (BD) simulations, and free energy analyses, were performed to elucidate determinants for the stability of the reaching dimer forms of full-length Avian Sarcoma Virus (ASV) and Human Immunodeficiency Virus (HIV) IN, and to examine the role of the C-tails (the last ~16–18 residues at the C-termini) in their structural dynamics. The dynamics of an HIV reaching dimer derived from small angle X-ray scattering and protein crosslinking data, was compared with the dynamics of a core–core dimer model derived from combining the crystal structures of two-domain fragments. The results showed that the core domains in the ASV reaching dimer express free dynamics, whereas those in the HIV reaching dimer are highly stable. BD simulations suggest a higher rate of association for the HIV core–core dimer than the reaching dimer. The predicted stability of these dimers was therefore ranked in the following order: ASV reaching dimer < HIV reaching dimer < composite core–core dimer. Analyses of MD trajectories have suggested residues that are critical for intermolecular contacts in each reaching dimer. Tests of these predictions and insights gained from these analyses could reveal a potential pathway for the association and dissociation of full-length IN multimers.     

Characterization and importance of the dimer interface of human calcium-activated nucleotidase

Human calcium-activated nucleotidase (CAN) exists as both a membrane-bound form in the endoplasmic reticulum and pre-Golgi intermediate membranes and as a secreted, soluble form. Although the wild-type human enzyme hydrolyzes ADP poorly, engineered soluble human proteins (SCANs) hydrolyze ADP much more efficiently, making them potentially useful therapeutic proteins for treatment of human clotting pathologies. According to the crystal structure and the recently identified dimeric nature of the soluble nucleotidase, the dimer interface contains a central core of hydrophobic residues. Previously, we demonstrated that the mutation of glutamic acid 130 (located in the dimer interface) to tyrosine increased both the tendency to form dimers and the ADPase activity. In the present study, we investigated the importance of the dimeric state for enzymatic activity and biological function in this nucleotidase by mutating isoleucine 170, which is located in the center of the hydrophobic core of the dimer interface. The results of analytical ultracentrifugation, chemical cross-linking, and tryptophan fluorescence analyses demonstrated that mutation of isoleucine 170 to either positively or negatively charged amino acids (lys or glu) disrupted the calcium-dependent dimerization in soluble CAN. Furthermore, these mutations decreased maximal ADPase activity for both the soluble and membrane-bound enzymes. Although not as critical as the hydrophobic interactions centered at isoleucine 170, the role of hydrophilic interactions in dimer formation was also demonstrated. Thus, mutation of aspartic acid 228 to threonine (D228T) decreased both the tendency to form dimers and ADPase activity, while double mutation of D228T/K224N largely restored the ability to form dimers and the ADPase activity, further indicating that the nucleotidase activity of CAN is linked to its quaternary structure. Since ADPase activity of the soluble form is crucial for its potential development as a therapeutic protein, these findings have implications for engineering the soluble human calcium-activated nucleotidase for clinical applications. In addition, future comparison of monomeric (I170K and I170E mutants) and dimeric (wild-type) crystal structures of SCAN will advance our understanding of its enzymatic mechanism and aid in engineering efforts.     

Unique oligomeric intermediates of bovine liver catalase

Catalases, although synthesized from single genes and built up from only one type of subunit, exist in heterogeneous form with respect to their conformations and association states in biological systems. This heterogeneity is not of genetic origin, but rather reflects the instability of this oligomeric heme enzyme. To understand better the factors that stabilize the various association states of catalase, we performed studies on the multimeric intermediates that are stabilized during guanidine-hydrochloride- and urea-induced unfolding of bovine liver catalase (BLC). For the first time, we have observed an enzymatically active, folded dimer of native BLC. This dimer has slightly higher enzymatic activity and altered structural properties compared to the native tetramer. Comparative studies of the effect of NaCl, GdmCl, and urea on BLC show that cation binding to negatively charged groups present in amino acid side chains of the enzyme leads to stabilization of an enzymatically active, folded dimer of BLC. Besides the folded dimer, an enzymatically active expanded tetramer and a partially unfolded, enzymatically inactive dimer of BLC were also observed. A complete recovery of native enzyme was observed on refolding of expanded tetramers and folded dimers; however, a very low recovery (maximum of approximately 5%) of native enzyme was observed on refolding of partially unfolded dimers and fully unfolded monomers.     

Construction of a stable dimer of Bacillus stearothermophilus lactate dehydrogenase.

A molecular graphics analysis of the features which prevent cytosolic malate dehydrogenase dimers from forming tetramers was evaluated by its success in predicting the synthesis of a version of the LDH framework which is a stable dimer. Surface residues responsible for malate dehydrogenases being dimers were revealed by superimposing the structures of two dimers of pig cytosolic malate dehydrogenase on one homologous tetramer of L-lactate dehydrogenase from Bacillus stearothermophilus. Four regions were identified as composing the P-axis dimer-dimer interface. Two regions of the dimer were surface loops that collided when built as a tetramer: a large loop (residues 203-207, KNOBI) and a small loop (residues 264-269, KNOBII), and these were candidates to explain the dimeric character of malate dehydrogenase. The analysis was tested by constructing a synthetic B. stearothermophilus lactate dehydrogenase (KNOBI) containing the large malate dehydrogenase loop (residues 203-207 being AYIKLQAKE, and extra four amino acids). The new construct was thermotolerant (90 degrees C) and enzymically active with kcat and KM (pyruvate) values similar to those of the wild-type enzyme. However, whereas the allosteric activator fructose 1,6-bisphosphate decreased KM 100 times for wild type, it had no influence on KNOBI. The molecular volumes of 1-120 microM concentrations of the construct were measured by time-resolved decay of tryptophan fluorescence anisotropy and by gel filtration. Both methods showed the molecular weight of wild type increased from dimer to tetramer with Kd about 20 microM dimer. KNOBI remained a dimer under these conditions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Equilibrium folding of the core histones: the H3-H4 tetramer is less stable than the H2A-H2B dimer

To compare the stability of structurally related dimers and to aid in understanding the thermodynamics of nucleosome assembly, the equilibrium stabilities of the recombinant wild-type H3-H4 tetramer and H2A-H2B dimer have been determined by guanidinium-induced denaturation, using fluorescence and circular dichroism spectroscopies. The unfolding of the tetramer and dimer are highly reversible. The unfolding of the H2A-H2B dimer is a two-state process, with no detected equilibrium intermediates. The H3-H4 tetramer is unstable at moderate ionic strengths (mu approximately 0.2 M). TMAO (trimethylamine-N-oxide) was used to stabilize the tetramer; the stability of the H2A-H2B dimer was determined under the same solvent conditions. The equilibrium unfolding of H3-H4 was best described by a three-state mechanism, with well-folded H3-H4 dimers as a populated intermediate. When compared to H2A-H2B, the H3-H3 tetramer interface and the H3-H4 histone fold are strikingly less stable. The free energy of unfolding, in the absence of denaturant, for the H3-H4 and H2A-H2B dimers are 12.4 and 21.0 kcal mol(-)(1), respectively, in 1 M TMAO. It is postulated that the difference in stability between the histone dimers, which contain the same fold, is the result of unfavorable tertiary interactions, most likely the partial to complete burial of three salt bridges and burial of a charged hydrogen bond. Given the conservation of these buried interactions in histones from yeast to mammals, it is speculated that the H3-H4 tetramer has evolved to be unstable, and this instability may relate to its role in nucleosome dynamics.     

Molecular dynamics simulation of amyloid beta dimer formation

Recent experiments with amyloid beta (Abeta) peptide indicate that formation of toxic oligomers may be an important contribution to the onset of Alzheimer's disease. The toxicity of Abeta oligomers depends on their structure, which is governed by assembly dynamics. Due to limitations of current experimental techniques, a detailed knowledge of oligomer structure at the atomic level is missing. We introduce a molecular dynamics approach to study Abeta dimer formation. 1), We use discrete molecular dynamics simulations of a coarse-grained model to identify a variety of dimer conformations; and 2), we employ all-atom molecular mechanics simulations to estimate thermodynamic stability of all dimer conformations. Our simulations of a coarse-grained Abeta peptide model predicts 10 different planar beta-strand dimer conformations. We then estimate the free energies of all dimer conformations in all-atom molecular mechanics simulations with explicit water. We compare the free energies of Abeta(1-42) and Abeta(1-40) dimers. We find that 1), dimer conformations have higher free energies compared to their corresponding monomeric states; and 2), the free-energy difference between the Abeta(1-42) and the corresponding Abeta(1-40) dimer conformation is not significant. Our results suggest that Abeta oligomerization is not accompanied by the formation of thermodynamically stable planar beta-strand dimers.     

Human immunodeficiency virus type 1 RNA outside the primary encapsidation and dimer linkage region affects RNA dimer stability in vivo.

To characterize the cis-acting determinants that function in RNA dimer formation and maintenance, we examined the stability of RNA dimers isolated from virus particles containing mutations in the encapsidation region of human immunodeficiency virus type 1 (HIV-1). The genomic RNAs of all mutants containing lesions in elements required for in vitro dimerization exhibited thermal stability similar to that of wild-type (WT) HIV-1. These data indicate that the eventual formation of stable dimeric RNA in vivo is not absolutely dependent on the elements that promote dimer formation in vitro. Surprisingly, mutants that lacked a large segment of the middle portion of the genome, outside the likely primary dimer linkage region, formed RNA dimers that were measurably more stable than WT. In addition, the insertion of one or multiple copies of a foreign gene, which resulted in a series of vectors that approached RNA length similar to that of WT RNA, still exhibited augmented dimer stability. These results suggest that there are regions in the HIV-1 genome outside the primary dimer initiation and dimer linkage regions that can negatively affect dimer stability.     

One site mutation disrupts dimer formation in human DPP-IV proteins

DPP-IV is a prolyl dipeptidase, cleaving the peptide bond after the penultimate proline residue. It is an important drug target for the treatment of type II diabetes. DPP-IV is active as a dimer, and monomeric DPP-IV has been speculated to be inactive. In this study, we have identified the C-terminal loop of DPP-IV, highly conserved among prolyl dipeptidases, as essential for dimer formation and optimal catalysis. The conserved residue His750 on the loop contributes significantly for dimer stability. We have determined the quaternary structures of the wild type, H750A, and H750E mutant enzymes by several independent methods including chemical cross-linking, gel electrophoresis, size exclusion chromatography, and analytical ultracentrifugation. Wild-type DPP-IV exists as dimers both in the intact cell and in vitro after purification from human semen or insect cells. The H750A mutation results in a mixture of DPP-IV dimer and monomer. H750A dimer has the same kinetic constants as those of the wild type, whereas the H750A monomer has a 60-fold decrease in kcat. Replacement of His750 with a negatively charged Glu (H750E) results in nearly exclusive monomers with a 300-fold decrease in catalytic activity. Interestingly, there is no dynamic equilibrium between the dimer and the monomer for all forms of DPP-IVs studied here. This is the first study of the function of the C-terminal loop as well as monomeric mutant DPP-IVs with respect to their enzymatic activities. The study has important implications for the discovery of drugs targeted to the dimer interface.     

Characterization of mAb dimers reveals predominant dimer forms common in therapeutic mAbs

The formation of undesired high molecular weight species such as dimers is an important quality attribute for therapeutic monoclonal antibody formulations. Therefore, the thorough understanding of mAb dimerization and the detailed characterization mAb dimers is of great interest for future pharmaceutical development of therapeutic antibodies. In this work, we focused on the analyses of different mAb dimers regarding size, surface properties, chemical identity, overall structure and localization of possible dimerization sites. Dimer fractions of different mAbs were isolated to a satisfactory purity from bulk material and revealed 2 predominant overall structures, namely elongated and compact dimer forms. The elongated dimers displayed one dimerization site involving the tip of the Fab domain. Depending on the stress applied, these elongated dimers are connected either covalently or non-covalently. In contrast, the compact dimers exhibited non-covalent association. Several interaction points were detected for the compact dimers involving the hinge region or the base of the Fab domain. These results indicate that mAb dimer fractions are rather complex and may contain more than one kind of dimer. Nevertheless, the overall appearance of mAb dimers suggests the existence of 2 predominant dimeric structures, elongated and compact, which are commonly present in preparations of therapeutic mAbs.