Biocatalysis of immobilized chlorophyllase in a ternary micellar system.

The immobilization of chlorophyllase was optimized by physical adsorption on various inorganic supports, including alumina, celite, Dowex-1-chloride, glass beads and silica gel. The enzyme was also immobilized in different media, including water, Tris-HCl buffer solution and a ternary micellar system containing Tris-HCl buffer solution, hexane and surfactant. The highest immobilization efficiency (84.56%) and specific activity (0.34 mumol hydrolyzed chlorophyll mg protein-1 per min) were obtained when chlorophyllase was suspended in Tris-HCl buffer solution and adsorbed onto silica gel. The effect of different ratios of chlorophyllase to the support and the optimum incubation time for the immobilization of chlorophyllase were determined to be 1-4 and 60 min, respectively. The experimental results showed that the optimum pH and temperature for the immobilized chlorophyllase were 8.0 and 35 degrees C, respectively. The use of optimized amounts of selected membrane lipids increased the specific activity of the immobilized chlorophyllase by approximately 50%. The enzyme kinetic studies indicated that the immobilized chlorophyllase showed a higher affinity towards chlorophyll than pheophytin as substrate.     

Biodiesel production from pomace oil by using lipase immobilized onto olive pomace

In the present work, microbial lipase from Thermomyces lanuginosus was immobilized by covalent binding onto olive pomace. Immobilized support material used to produce biodiesel with pomace oil and methanol. The properties of the support and immobilized derivative were evaluated by scanning electron microscopy (SEM). The maximum immobilization of T. lanuginosus was obtained as 18.67 mg/g support and the highest specific activity was 10.31 U/mg protein. The properties of immobilized lipase were studied. The effects of protein concentration, pH and buffer concentration on the immobilization and lipase activity were investigated. Biodiesel production using the immobilized lipase was realized by a three-step addition of methanol to avoid strong substrate inhibition. Under the optimized conditions, the maximum biodiesel yield was 93% at 25 °C in 24 h reaction. The immobilized enzyme retained its activity during the 10 repeated batch reactions.     

Immobilization of Amaranthus leaf oxalate oxidase on alkylamine glass

A membrane bound oxalate oxidase from leaves of Amaranthus spionsus has been partially purified and immobilized on alkylamine glass with a yield of 9.2 mg protein/g support. The enzyme retained 99.4% of initial activity of free enzyme after immobilization. There was no change in the optimum pH (3.5) and Vmax but the temperature for maximum activity was slightly decreased (35 degrees C) and energy of activation (Ea) and Km for oxalate were increased after immobilization. The immobilized enzyme preparation was stable for 6 months, when stored in distilled water at 4 degrees C. Presence of Cl- did not affect the activity of immobilized enzyme.     

Characterization of molecular-sieve-bound inulinase

The enzyme inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7), prepared from Kluyveromyces marxianus has been immobilized using an inorganic solid support, molecular sieve 4A via the metal link method. The immobilized enzyme had around 22 units of inulinase activity per g of the support with retention of 72% of the original activity. The optimum protein to molecular sieve ratio for the maximum retention of inulinase activity was 9 mg/g molecular sieve. The properties of soluble and immobilized enzyme differed in many respects. The optimum pH of the enzyme shifted from 6 to 5 and the optimum temperature of enzyme activity changed from 50 to 55°C. K_m values were 6.7 mM for soluble enzyme and 10 mM for immobilized enzyme. The heat stability of the enzyme was improved by immobilization. Immobilized enzyme retained about 76% of the original activity after 40 days of storage at room temperature (30±2°C).     

葡萄糖氧化酶的有机相共价固定化

将葡萄糖氧化酶(GOD)在最适pH条件下冻干后,以戊二醛活化的壳聚糖为载体,分别在传统水相和1,4-二氧六环、乙醚、乙醇三种不同的有机相中进行共价固定化。通过比较水相固定化酶和有机相固定化酶的酶比活力、酶学性质及酶动力学参数,考察酶在有机相中的刚性特质对酶在共价固定化过程中保持酶活力的影响。结果表明,戊二醛浓度为0.1%、加酶量为80 mg/1 g载体、含水1.6%的1,4-二氧六环有机相固定化GOD与水相共价固定化GOD相比,酶比活力提高2.9倍,有效酶活回收率提高3倍;在连续使用7次后,1,4-二氧六环有机相固定化GOD的酶活力仍为相应水相固定化酶的3倍。在酶动力学参数方面,不论是表观米氏常数,最大反应速度还是转换数,1,4-二氧六环有机相固定化的GOD(Kmapp=5.63 mmol/L,Vmax=1.70μmol/(min.mgGOD),Kcat=0.304 s-1)都优于水相共价固定化GOD(Kmapp=7.33 mmol/L,Vmax=1.02μmol/(min.mg GOD),Kcat=0.221 s-1)。因此,相比于传统水相,GOD在合适的有机相中进行共价固定化可以获得具有更高酶活力和更优催化性质的固定化酶。该发现可能为酶蛋白在共价固定化时因构象改变而丢失生物活性的问题提供解决途径。     

Optimization of an industrial biocatalyst of glutaryl acylase: stabilization of the enzyme by multipoint covalent attachment onto new amino-epoxy Sepabeads

Glutaryl-7-aminocephalosporanic acid acylase (GA), an industrially relevant enzyme, has been immobilized onto very different supports, including glyoxyl agarose, heterofunctional epoxy Sepabeads, glutaraldehyde and cyanogen bromide (CNBr) activated supports. Immobilization onto amino-epoxy Sepabeads rendered the most thermo stable preparation of GA, with a half-life time eight times higher than the soluble enzyme, keeping 80% of the enzyme activity. Several parameters that affect the enzyme-support interaction (pH and incubation time) were studied. It was found that after immobilization onto amino-epoxy Sepabeads, incubation at alkaline pH and low temperature exerted dramatic stabilizing effects, increasing the half-life time of the derivative 130 times with respect to the soluble enzyme, while keeping unaltered its intrinsic activity. The loading capacity of the amino-epoxy Sepabeads proved to be very good with a maximum load of 62 mg of protein per g of support with 85 IU/g at 25 degrees C and 200 IU/g at 37 degrees C which makes it a biocatalyst of possible industrial application.     

Optimizing Immobilization and Stabilization of Feruloyl Esterase from Humicola Insolens and its Application for the Feruloylation of Oligosaccharides

Feruloyl esterase (FAE)-catalyzed esterification reaction is as a potential route for the biosynthesis of feruloylated oligosaccharides as functional ingredients. Immobilization of FAE from Humicola insolens on metal chelate-epoxy supports was investigated. The study of effects of immobilization parameters using response surface methodology revealed the significance of enzyme/support ratio (3.25-29.25 mg/g support), immobilization time (14-38 h), buffer molarity (0.27-1.25 M) and pH (4.0-8.0). The interactions between enzyme-to-support ratio/buffer molarity and enzyme-to-support ratio/pH were found to be critical for the modulation of the immobilization activity yield and the retention of specific activity, respectively. Optimum conditions for FAE-immobilization on metal chelate Sepabeads® EC-EP R were identified to be 22.75 mg FAE/g support, pH of 5.0, 27.7 h and buffer molarity of 0.86 M. At these conditions, an activity yield of 82.4%, a specific activity retention of 143.4%, and an enzyme activity of 395.4 μmol/min. g support were achieved. Further incubation of the immobilized FAE at pH 10.0 improved its thermostability. Increasing the pore size of the epoxy support improved the retention of FAE hydrolytic activity and the esterifying efficiency of the immobilized biocatalyst. Optimally immobilized and stabilized FAE on metal chelate-epoxy support retained up to 92.9% of the free enzyme feruloylation efficiency to xylooligosaccharides..     

Silica-encapsulated magnetic nanoparticles: enzyme immobilization and cytotoxic study

Silica-encapsulated magnetic nanoparticles (MNPs) were prepared via microemulsion method. The products were characterized by high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectrum (EDS). MNPs with no observed cytotoxic activity against human lung carcinoma cell and brine shrimp lethality were used as suitable support for glucose oxidase (GOD) immobilization. Binding of GOD onto the support was confirmed by the FTIR spectra. The amount of immobilized GODs was 95 mg/g. Storage stability study showed that the immobilized GOD retained 98% of its initial activity after 45 days and 90% of the activity was also remained after 12 repeated uses. Considerable enhancements in thermal stabilities were observed for the immobilized GOD at elevated temperatures up to 80°C and the activity of immobilized enzyme was less sensitive to pH changes in solution.     

Highly efficient "tight fit" immobilization of alpha-chymotrypsin in mesoporous MCM-41: a novel approach using precursor immobilization and activation

The zymogen alpha-chymotrypsinogen A is bound to mesoporous silica MCM-41 with a protein loading of 170 mg/g solid (MCM-Z) by a simple stirring in aqueous tris-HCl buffer (pH 7.2). The bound zymogen is then activated with trypsin to obtain alpha-chymotrypsin immobilized on MCM-41 (MCM-E.I) that displays an effective enzyme activity corresponding to 65 mg protein/g of solid support (3250 BTEE units/g). A direct immobilization of commercially available alpha-chymotrypsin (MCM-E.II) gives lower loading (1250 BTEE units/g). Protein content of the solid support after immobilization is confirmed by thermogravimetric analysis (TGA). The enzyme is tightly bound to the support and can be used over 100 recycles over 1 week in aqueous as well as reverse micellar media. The immobilized enzyme (MCM-E.I) has been used for resolution of N-acetyl-dl-amino acid esters and racemic trans-4-methoxy-3-phenylglycidic acid (PGA) methyl ester.     

Characterization and optimization of β-galactosidase immobilization process on a mixed-matrix membrane

β-Galactosidase is an important enzyme catalyzing not only the hydrolysis of lactose to the monosaccharides glucose and galactose but also the transgalactosylation reaction to produce galacto-oligosaccharides (GOS). In this study, β-galactosidase was immobilized by adsorption on a mixed-matrix membrane containing zirconium dioxide. The maximum β-galactosidase adsorbed on these membranes was 1.6 g/m2, however, maximal activity was achieved at an enzyme concentration of around 0.5 g/m2. The tests conducted to investigate the optimal immobilization parameters suggested that higher immobilization can be achieved under extreme parameters (pH and temperature) but the activity was not retained at such extreme operational parameters. The investigations on immobilized enzymes indicated that no real shift occurred in its optimal temperature after immobilization though the activity in case of immobilized enzyme was better retained at lower temperature (5 °C). A shift of 0.5 unit was observed in optimal pH after immobilization (pH 6.5 to 7). Perhaps the most striking results are the kinetic parameters of the immobilized enzyme; while the Michaelis constant (K(m)) value increased almost eight times compared to the free enzyme, the maximum enzyme velocity (V(max)) remained almost constant.     

Investigating and optimizing the immobilization of levansucrase for increased transfructosylation activity and thermal stability

Levansucrase (LS) represents a key enzyme in glycoside synthesis of novel prebiotics and β-2,6-levan. The study of the effects of immobilization parameters of LS, produced from Bacillus amyloliquefaciens, onto glyoxyl agarose-iminodiacetic acid/Cu (glyoxyl agarose-IDA/Cu) by response surface methodology revealed the significance of their interactive effects. Retention of activity was altered by interactive effects from buffer molarity/time and buffer pH/buffer molarity. The optimized immobilization conditions were identified to be a protein loading of 9.09 mg protein/g support, a buffer concentration of 608 mM at pH 6.8 and an incubation time of 49 h. Normally a reducing agent is applied to the immobilized enzyme in order to promote the formation of covalent bonds. This step was replaced with the addition of the ionic polymer polyethylenimine (PEI), which provided a better compromise between retained activity and thermal stability of the immobilized LS. Indeed, LS immobilized onto glyoxyl agarose-IDA/Cu/PEI had a retention of activity of 70.91% with a protein yield of 44.73% and an activity yield of 54.69%, while exhibiting a half-life 4.7 times higher than that of the free LS at 50 °C.     

Use of chemically modified PMMA microspheres for enzyme immobilization

Modified poly(methyl methacrylate) (PMMA) microspheres, about 7microm in diameter, carrying aldehyde groups on their surfaces were synthesized and used as the support for enzyme immobilization. The immobilizing behavior as well as the properties of immobilized enzyme was studied. The amount of bound enzyme can be extended to 76.8mg g(-1) support, which is relatively much higher than other supports. The kinetic investigation derived from three typical models shows that the practical process is more complicated than the ideal condition, with one or more interactions being involved in the immobilization process. The K(m) value is actually larger and V(max) is smaller in the immobilized form than those in the free form. The increased resistance of the immobilized enzyme against the changes of temperature indicates that immobilizing enzyme onto the modified microspheres is useful for enzyme immobilization.     

Immobilization on Eupergit C of cyclodextrin glucosyltransferase (CGTase) and properties of the immobilized biocatalyst

The extreme thermophilic cyclodextrin glucanotransferase (CGTase) from Thermoanaerobacter sp. was covalently attached to Eupergit C. Different immobilization parameters (incubation time, ionic strength, pH, ratio enzyme/support, etc.) were optimized. The maximum yield of bound protein was around 80% (8.1 mg/g support), although the recovery of β-cyclodextrin cyclization activity was not higher than 11%. The catalytic efficiency was lower than 15%. Results were compared with previous studies on covalent immobilization of CGTase.

The enzymatic properties of immobilized CGTase were investigated and compared with those of the soluble enzyme. Soluble and immobilized CGTases showed similar optimum temperature (80–85 °C) and pH (5.5) values, but the pH profile of the immobilized CGTase was broader at higher pH values. The thermoinactivation of the CGTase coupled to Eupergit C was slower than the observed with the native enzyme. The half-life of the immobilized enzyme at 95 °C was five times higher than that of the soluble enzyme. The immobilized CGTase maintained 40% of its initial activity after 10 cycles of 24 h each. After immobilization, the selectivity of CGTase (determined by the ratio CDs/oligosaccharides) was notably shifted towards oligosaccharide production.     

Immobilization of trypsin on chitosan gels: use of different activation protocols and comparison with other supports

Trypsin was immobilized on chitosan gels coagulated with 0.1 or 1 M NaOH and activated with glutaraldehyde or glycidol. The derivatives were characterized by their recovered activity, thermal (40, 55 and 70 degrees C) and alkaline (pH 11) stabilities, amount of enzyme immobilized on gels for several enzyme loads (8-14 mg(protein)/g(Gel)) and compared to agarose derivatives. Enzyme loads higher than 14 mg(protein)/g(Gel) can be immobilized on glutaraldehyde derivatives, which showed 100% immobilization yield and, for loads up to 8 mg(protein)/g(Gel), 100% recovered activity. Activation with glycidol led to lower immobilization yields than the ones obtained with glutaraldehyde, 61% for agarose-glyoxyl (AgGly) with low grade of activation and 16% for the chitosan-glyoxyl (ChGly), but allowed obtaining the most stable derivative (ChGly), that was 660-fold more stable than the soluble enzyme at 55 and 70 degrees C-approximately threefold more stable than AgGly. The ChGly derivative presented also the highest stability during incubation at pH 11. Analyses of lysine residue contents in soluble and immobilized trypsin indicated formation of multipoint bonds between enzyme and support, for glyoxyl derivatives.     

Silver nanoparticle (AgNPs) doped gum acacia-gelatin-silica nanohybrid: an effective support for diastase immobilization

An effective carrier matrix for diastase alpha amylase immobilization has been fabricated by gum acacia-gelatin dual templated polymerization of tetramethoxysilane. Silver nanoparticle (AgNp) doping to this hybrid could significantly enhance the shelf life of the impregnated enzyme while retaining its full bio-catalytic activity. The doped nanohybrid has been characterized as a thermally stable porous material which also showed multipeak photoluminescence under UV excitation. The immobilized diastase alpha amylase has been used to optimize the conditions for soluble starch hydrolysis in comparison to the free enzyme. The optimum pH for both immobilized and free enzyme hydrolysis was found to be same (pH=5), indicating that the immobilization made no major change in enzyme conformation. The immobilized enzyme showed good performance in wide temperature range (from 303 to 323 K), 323 K being the optimum value. The kinetic parameters for the immobilized, (K(m)=10.30 mg/mL, V(max)=4.36 μmol mL(-1)min(-1)) and free enzyme (K(m)=8.85 mg/mL, V(max)=2.81 μmol mL(-1)min(-1)) indicated that the immobilization improved the overall stability and catalytic property of the enzyme. The immobilized enzyme remained usable for repeated cycles and did not lose its activity even after 30 days storage at 40°C, while identically synthesized and stored silver undoped hybrid lost its ~31% activity in 48 h. Present study revealed the hybrids to be potentially useful for biomedical and optical applications.     

Application and characterization of magnetic chitosan microspheres for enhanced immobilization of cellulase

In this study, a unique carrier magnetic chitosan microspheres (MCTS) was simply synthesized by anchoring Fe₃O₄ onto chitosan for direct immobilization of cellulases cross-linked by gluteraldehye. The structure and morphology were characterized using FT-IR, TGA, VSM and SEM. The optimum immobilization conditions were investigated: immobilized pH 7.0, amount of enzyme 15?mL (0.1?mg/mL), immobilization temperature 30?°C, immobilization time 5?h. At optimum conditions, MCTS achieved maximum enzyme solid loading rate of 73.5?mg/g, while recovery of enzyme activity approached to 71.6%. In the recycle test, immobilized cellulases operated without significant loss in its initial performances after 3 cycles, which indicated that immobilized cellulases can be regenerated and reused. The immobilized enzyme has better values of thermal and storage stability than that of free enzyme. Therefore, MCTS may be considered as a candidate with potential value of application in large-scale operations for cellulases immobilization.     

Silanized palygorskite for lipase immobilization

Lipase from Candida lipolytica has been immobilized on 3-aminopropyltriethoxysilane-modified palygorskite support. Scanning electron micrographs proved the covalently immobilization of C. lipolytica lipase on the palygorskite support through glutaraldehyde. Using an optimized immobilization protocol, a high activity of 3300 U/g immobilized lipase was obtained. Immobilized lipase retained activity over wider ranges of temperature and pH than those of the free enzyme. The optimum pH of the immobilized lipase was at pH 7.0–8.0, while the optimum pH of free lipase was at 7.0. The retained activity of the immobilized enzyme was improved both at lower and higher pH in comparison to the free enzyme. The immobilized enzyme retained more than 70% activity at 40 °C, while the free enzyme retained only 30% activity. The immobilization stabilized the enzyme with 81% retention of activity after 10 weeks at 30 °C whereas most of the free enzyme was inactive after a week. The immobilized enzyme retains high activity after eight cycles. The kinetic constants of the immobilized and free lipase were also determined. The K_m and V_max values of immobilized lipase were 0.0117 mg/ml and 4.51 μmol/(mg min), respectively.     

Stabilization of alpha-chymotrypsin by covalent immobilization on amine-functionalized superparamagnetic nanogel

Stabilization of alpha-chymotrypsin (CT) by covalent immobilization on the amine-functionalized magnetic nanogel was studied. The amino groups containing superparamagnetic nanogel was obtained by Hoffman degradation of the polyacrylamide (PAM)-coated Fe(3)O(4) nanoparticles prepared by facile photochemical in situ polymerization. CT was then covalently bound to the magnetic nanogel with reactive amino groups by using 1-ethyl-3-(3-dimethylaminepropyl) carbodiimide as coupling reagent. The binding capacity was determined to be 61mg enzyme/g nanogel by BCA protein assay. Specific activity of the immobilized CT was measured to be 0.93U/(mgmin), 59.3% as that of free CT. The obtained immobilized enzyme had better resistance to temperature and pH inactivation in comparison to free enzyme and thus widened the ranges of reaction pH and temperature. The immobilized enzyme exhibited good thermostability, storage stability and reusability. Kinetic parameters were determined for both the immobilized and free enzyme. The value of K(m) of the immobilized enzyme was larger than did the free form, whereas the V(max) was smaller for the immobilized enzyme.     

Immobilization of endo-polygalacturonase from Aspergillus niger on various types of macromolecular supports

Endo-polygalacturonase (endo-PG) was immobilized on a wide range of natural and synthetic macromolecular supports and their modified derivatives representing many chemical classes, including esters, amides, phenols, alkyl- and arylamines, and carboxyl derivatives. The immobilization entailed methods of adsorption alone as well as covalent bond formation using glutaraldehyde or carbodiimide or via the diazo-coupling reaction. The most promising system proved to be immobilization on trimalehylchitosan (TMC) via adsorption followed by treatment with glutaraldehyde (GA). The binding capacity of the support is on the order of 13,000 IU/g, half of which is active. Various properties of immobilized endo-PG were evaluated. The optimum pH of the enzyme shifted to the alkaline side. The relative catalytic activity was considerably high even at room temperature and remained so above 70 degrees C. The thermal stability at pH 3-4 was notably improved by immobilization, the half-time doubling. Finally, the apparent K(m) was greater for immobilized endo-PG than for native enzyme, while the V(max) was smaller for the immobilized enzyme.     

Optimization of urease immobilization onto non-porous HEMA incorporated poly(EGDMA) microbeads and estimation of kinetic parameters.

Jack bean urease (urea aminohydrolase, EC 3.5.1.5) was immobilized onto modified non-porous poly(ethylene glycol dimethacrylate/2-hydroxy ethylene methacrylate), (poly(EGDMA/HEMA)), microbeads prepared by suspension copolymerization for the potential use in hemoperfusion columns, not previously reported. The conditions of immobilization; enzyme concentration, medium pH, substrate and ethylene diamine tetra acetic acid (EDTA) presence in the immobilization medium in different concentrations, enzyme loading ratio, processing time and immobilization temperature were investigated for highest apparent activity. Immobilized enzyme retained 73% of its original activity for 75 days of repeated use with a deactivation constant kd = 3.72 x 10(-3) day(-1). A canned non-linear regression program was used to estimate the intrinsic kinetic parameters of immobilized enzyme with a low value of observable Thiele modulus (phi < 0.3) and these parameters were compared with those of free urease. The best-fit kinetic parameters of a Michaelis-Menten model were estimated as Vm = 3.318 x 10(-4) micromol/s mg bound enzyme protein, Km = 15.94 mM for immobilized, and Vm = 1.074 micromol NH3/s mg enzyme protein, Km = 14.49 mM for free urease. The drastic decrease in Vm value was attributed to steric effects, conformational changes in enzyme structure or denaturation of the enzyme during immobilization. Nevertheless, the change in Km value was insignificant for the unchanged affinity of the substrate with immobilization. For higher immobilized urease activity, smaller particle size and concentrated urease with higher specific activity could be used in the immobilization process.