Analysis of sequence diversity among IS6110 sequence of Mycobacterium tuberculosis: possible implications for PCR based detection

The IS6110 belongs to the family of insertion sequences (IS) of the IS3 category. This insertion sequence was reported to be specific for Mycobacterium tuberculosis complex and hence is extensively exploited for laboratory detection of the agent of tuberculosis and for epidemiological investigations based on polymerase chain reaction. IS6110 is 1361-bp long and within this sequence different regions have been utilized as targets in the identification of M. tuberculosis by PCR. However, the results are not always consistent, specific and sensitive. In recent years, a few clinical investigations raised concerns over IS6110 specificity and sensitivity in the diagnosis of tuberculosis due to false-positive (homology with other target DNA besides M. tuberculosis) or false negative (due to absence of copies of IS6110) results with IS6110 specific primers. To unravel the variations in IS6110 sequences, an insilico analysis of IS6110 sequence of different strains of M. tuberculosis was carried out. Our results of comparative analysis of IS6110 insertion sequences of M. tuberculosis complex suggests that, IS6110 insertion sequences harbored variations in its sequence, which is evident from the phylogenetic analysis. Importantly, IS6110 sequence has divergence within the copies of same strain and formed different clusters. A list of IS6110 specific primers used in various clinical investigation of tuberculosis was obtained from the literature and their performance scrutinized. Our study emphasizes the need to develop PCR assays (multiplex format) targeting more than one region of the genome of M. tuberculosis.     

Comparative Study of a Real-Time PCR Assay Targeting senX3-regX3 versus Other Molecular Strategies Commonly Used in the Diagnosis of Tuberculosis

Background

Nucleic acid amplification tests are increasingly used for the rapid diagnosis of tuberculosis. We undertook a comparative study of the efficiency and diagnostic yield of a real-time PCR senX3-regX3 based assay versus the classical IS6110 target and the new commercial methods.

Methods

This single-blind prospective comparative study included 145 consecutive samples: 76 from patients with culture-confirmed tuberculosis (86.8% pulmonary and 13.2% extrapulmonary tuberculosis: 48.7% smear-positive and 51.3% smear-negative) and 69 control samples (24 from patients diagnosed with non-tuberculous mycobacteria infections and 45 from patients with suspected tuberculosis which was eventually ruled out). All samples were tested by two CE-marked assays (Xpert^®MTB/RIF and AnyplexTM plus MTB/NTM) and two in-house assays targeting senX3-regX3 and the IS6110 gene.

Results

The detection limit ranged from 1.00E+01 fg for Anyplex, senX3-regX3 and IS6110 to 1.00E+04 fg for Xpert. All three Xpert, senX3-regX3 and IS6110 assays detected all 37 smear-positive cases. Conversely, Anyplex was positive in 34 (91.9%) smear-positive cases. In patients with smear-negative tuberculosis, differences were observed between the assays; Xpert detected 22 (56.41%) of the 39 smear-negative samples, Anyplex 24 (61.53%), senX3-regX3 28 (71.79%) and IS6110 35 (89.74%). Xpert and senX3-regX3 were negative in all control samples; however, the false positive rate was 8.7% and 13% for Anyplex and IS6110, respectively. The overall sensitivity was 77.6%, 85.7%, 77.3% and 94.7% and the specificity was 100%, 100%, 90.8% and 87.0% for the Xpert, senX3-regX3, Anyplex and IS6110 assays, respectively.

Conclusion

Real-time PCR assays targeting IS6110 lack the desired specificity. The Xpert MTB/RIF and in-house senX3-regX3 assays are both sensitive and specific for the detection of MTBC in both pulmonary and extrapulmonary samples. Therefore, the real time PCR senX3-regX3 based assay could be a useful and complementary tool in the diagnosis of tuberculosis.     

A genomic library-based amplification approach (GL-PCR) for the mapping of multiple IS6110 insertion sites and strain differentiation of Mycobacterium tuberculosis

Evidence suggests that insertion of the IS6110 element is not without consequence to the biology of Mycobacterium tuberculosis complex strains. Thus, mapping of multiple IS6110 insertion sites in the genome of biomedically relevant clinical isolates would result in a better understanding of the role of this mobile element, particularly with regard to transmission, adaptability and virulence. In the present paper, we describe a versatile strategy, referred to as GL-PCR, that amplifies IS6110-flanking sequences based on the construction of a genomic library. M. tuberculosis chromosomal DNA is fully digested with HincII and then ligated into a plasmid vector between T7 and T3 promoter sequences. The ligation reaction product is transformed into Escherichia coli and selective PCR amplification targeting both 5' and 3' IS6110-flanking sequences are performed on the plasmid library DNA. For this purpose, four separate PCR reactions are performed, each combining an outward primer specific for one IS6110 end with either T7 or T3 primer. Determination of the nucleotide sequence of the PCR products generated from a single ligation reaction allowed mapping of 21 out of the 24 IS6110 copies of two 12 banded M. tuberculosis strains, yielding an overall sensitivity of 87,5%. Furthermore, by simply comparing the migration pattern of GL-PCR-generated products, the strategy proved to be as valuable as IS6110 RFLP for molecular typing of M. tuberculosis complex strains. Importantly, GL-PCR was able to discriminate between strains differing by a single IS6110 band.     

Direct application of AvaII PCR restriction fragment length polymorphism analysis (AvaII PRA) targeting 644 bp heat shock protein 65 (hsp65) gene to sputum samples

To evaluate the usefulness of the AvaII PRA method targeting 644-bp hsp65 gene for the direct detection of pathogenic mycobacteria from clinical specimens, we applied this method to 40 sputum samples and compared the results to those obtained by IS 6110 PCR. Although this method showed a sensitivity slightly lower than IS 6110 PCR (97.5% vs. 100%), it detected infections of M. avium complex (MAC) in two patients, which was not possible by IS 6110 PCR. We conclude that AvaII PRA is a highly effective method for directly detecting pathogenic mycobacteria in primary clinical specimens.     

Molecular evidence for independent occurrence of IS6110 insertions at the same sites of the genome of Mycobacterium tuberculosis in different clinical isolates

Several characteristics of Mycobacterium tuberculosis (e.g., conserved genome and low growth rate) have severely restricted the study of the microorganism. The discovery of IS6110 raised hopes of overcoming these obstacles. However, our knowledge of this IS element is relatively limited; even its two basic characteristics (transposition mechanism and target site selection) are far from well understood. In this study, IS6110 insertions in ipl loci (iplA and iplB) in two collections of clinical isolates of M. tuberculosis from different geographic locations, one from Scotland and the other from Thailand, were investigated. Five different IS6110 insertions in the loci were identified: ipl-4::IS6110, ipl-5::IS6110, ipl-11::IS6110, ipl-12::IS6110, and ipl-13::IS6110. An attempt to establish the phylogenetic relationship of the isolates containing these insertions was unsuccessful, suggesting that some of these insertions may have arisen from more than one event. This possibility is further supported by the observation that IS6110 copies existed in the same site but with different orientations in different isolates, and the insertion site of ipl-1::IS6110 harbored IS6110 copies in both iplA and iplB in different strains. All these suggest the independent occurrence of IS6110 insertions at the same sites of the genome of M. tuberculosis in different clinical isolates. The implications of this finding are discussed.     

Usefulness of ligation-mediated PCR genotyping in tracking outbreak-associated Mycobacterium tuberculosis strains

With the emergence of a multidrug resistant tuberculosis (MDR-TB) outbreak, the availability of a rapid typing method to carry out a nationwide prospective survey for the tracking of newly emerging MDR-TB foci became a priority. For this purpose, we have applied the IS6110 PCR-based genotyping assay, namely, LM-PCR (ligation-mediated PCR). The latter relies on ligation of a synthetic oligonucleotide priming site to a restriction site flanking IS6110. Sequences between the IS element and the restriction site are then amplified using an IS6110 specific outward primer and an oligonucleotide specific to the ligated priming site. Although it was found slightly less discriminative than the standard IS6110 restriction fragment length polymorphism analysis (IS6110 RFLP), LM-PCR allowed for the rapid and prospective identification of new outbreak-related cases within a large pool of circulating M. tuberculosis isolates. In comparison to IS6110 RFLP LM-PCR was found simple enough to justify its implementation in laboratories involved in MDR-TB surveillance at a nationwide scale.     

建立液相芯片方法检测鉴别结核分枝杆菌复合群、鸟分枝杆菌与副结核分枝杆菌

运用液相芯片技术原理,以分枝杆菌菌种(群)特异基因序列IS6110、IS1081、IS1245和F57为目标基因,设计筛选4套扩增引物和杂交探针,建立同时检测鉴别结核分枝杆菌复合群、鸟分枝杆菌和副结核分枝杆菌的四重液相基因芯片检测方法。对13种共54株分枝杆菌菌株以及23种常见微生物样品的检测结果显示,四重液相芯片方法可特异检测鉴别目标菌种(群),与其它分枝杆菌菌种或微生物无非特异交叉反应;检测敏感性达2.1×101-2.5×102基因拷贝或0.06-0.74 fg DNA;组内检测变异系数和组间检测变异系数均<10%。采用四重液相芯片方法从临床结核疑似人痰样和牛组织样品中检出结核致病菌,检出率分别达75.6%(99/131)和94.9%(37/39),显著高于培养法(38.9%和53.8%)。对副结核疑似临床样品的检测试验结果显示,四重液相芯片方法与荧光PCR方法的阳性符合率为83%(24/29)。对四重混合模板的检测试验结果显示该液相芯片方法可鉴别不同菌种混合感染。四重液相芯片方法的检测周期<1 d,其中对纯化DNA模板的检测时间可在2-3 h内完成。     

Direct and simultaneous identification of Mycobacterium tuberculosis complex (MTBC) and Mycobacterium tuberculosis (MTB) by rapid multiplex nested PCR-ICT assay

The Mycobacterium tuberculosis (MTB) shows different virulence and host infection range from other members of the M. tuberculosis complex (MTBC). Differential identification of MTB from MTBC is thus important in certain occasions. The currently commercially available molecular assays which use either IS6110 or 16S rDNA fragment as identification targets are mainly designed for identifying MTBC but not for MTB. Comparative genomic DNA analysis has provided valuable information on regions of difference (RD) present in MTB but not in other members of the MTBC. RD9 region is further suggested to be a potential target for differential identification of MTB from MTBC. In this study, using IS6110 and Rv3618 (belong to RD9) as the specific identification targets for MTBC and MTB, respectively, we developed and tested a multiplex nested PCR-ICT (immuno-chromatography test) assay for simultaneously and directly detecting not only MTBC but also MTB from 1500 clinical sputum specimens. The results were compared with traditional culture and biochemical identification results together with patients' clinical assessments. This assay showed a 95.5% sensitivity, 97.9% specificity, 2.1% false positive rate and 4.5% false negative rate towards detection of MTBC, and a 93.0% sensitivity, 99.8% specificity, 0.2% false positive rate and 7.0% false negative rate for detection of MTB. This detection system shows great potential in clinical application.     

Amplicon DNA Melting Analysis for the Simultaneous Detection of Brucella spp and Mycobacterium tuberculosis Complex. Potential Use in Rapid Differential Diagnosis between Extrapulmonary Tuberculosis and Focal Complications of Brucellosis

Some sites of extrapulmonary tuberculosis and focal complications of brucellosis are very difficult to differentiate clinically, radiologically, and even histopathologically. Conventional microbiological methods for the diagnosis of extrapulmonary tuberculosis and complicated brucellosis not only lack adequate sensitivity, they are also time consuming, which could lead to an unfavourable prognosis. The aim of this work was to develop a multiplex real-time PCR assay based on SYBR Green I to simultaneously detect Brucella spp and Mycobacterium tuberculosis complex and evaluate the efficacy of the technique with different candidate genes. The IS711, bcsp31 and omp2a genes were used for the identification of Brucella spp and the IS6110, senX3-regX3 and cfp31 genes were targeted for the detection of the M. tuberculosis complex. As a result of the different combinations of primers, nine different reactions were evaluated. A test was defined as positive only when the gene combinations were capable of co-amplifying both pathogens in a single reaction tube and showed distinguishable melting temperatures for each microorganism. According to the melting analysis, only three combinations of amplicons (senX3-regX3+bcsp31, senX3-regX3+IS711 and IS6110+IS711) were visible. Detection limits of senX3-regX3+bcsp31 and senX3-regX3+IS711 were of 2 and 3 genome equivalents for M. tuberculosis complex and Brucella while for IS6110+IS711 they were of 200 and 300 genome equivalents, respectively. The three assays correctly identified all the samples, showing negative results for the control patients. The presence of multicopy elements and GC content were the components most influencing the efficiency of the test; this should be taken into account when designing a multiplex-based SYBR Green I assay. In conclusion, multiplex real time PCR assays based on the targets senX3-regX3+bcsp31 and senX3-regX3+IS711 using SYBR Green I are highly sensitive and reproducible. This may therefore be a practical approach for the rapid differential diagnosis between extrapulmonary tuberculosis and complicated brucellosis.     

International study to evaluate PCR methods for detection of Trypanosoma cruzi DNA in blood samples from Chagas disease patients

Background

A century after its discovery, Chagas disease still represents a major neglected tropical threat. Accurate diagnostics tools as well as surrogate markers of parasitological response to treatment are research priorities in the field. The purpose of this study was to evaluate the performance of PCR methods in detection of Trypanosoma cruzi DNA by an external quality evaluation.

Methodology/Findings

An international collaborative study was launched by expert PCR laboratories from 16 countries. Currently used strategies were challenged against serial dilutions of purified DNA from stocks representing T. cruzi discrete typing units (DTU) I, IV and VI (set A), human blood spiked with parasite cells (set B) and Guanidine Hidrochloride-EDTA blood samples from 32 seropositive and 10 seronegative patients from Southern Cone countries (set C). Forty eight PCR tests were reported for set A and 44 for sets B and C; 28 targeted minicircle DNA (kDNA), 13 satellite DNA (Sat-DNA) and the remainder low copy number sequences. In set A, commercial master mixes and Sat-DNA Real Time PCR showed better specificity, but kDNA-PCR was more sensitive to detect DTU I DNA. In set B, commercial DNA extraction kits presented better specificity than solvent extraction protocols. Sat-DNA PCR tests had higher specificity, with sensitivities of 0.05–0.5 parasites/mL whereas specific kDNA tests detected 5.10⁻³ par/mL. Sixteen specific and coherent methods had a Good Performance in both sets A and B (10 fg/µl of DNA from all stocks, 5 par/mL spiked blood). The median values of sensitivities, specificities and accuracies obtained in testing the Set C samples with the 16 tests determined to be good performing by analyzing Sets A and B samples varied considerably. Out of them, four methods depicted the best performing parameters in all three sets of samples, detecting at least 10 fg/µl for each DNA stock, 0.5 par/mL and a sensitivity between 83.3–94.4%, specificity of 85–95%, accuracy of 86.8–89.5% and kappa index of 0.7–0.8 compared to consensus PCR reports of the 16 good performing tests and 63–69%, 100%, 71.4–76.2% and 0.4–0.5, respectively compared to serodiagnosis. Method LbD2 used solvent extraction followed by Sybr-Green based Real time PCR targeted to Sat-DNA; method LbD3 used solvent DNA extraction followed by conventional PCR targeted to Sat-DNA. The third method (LbF1) used glass fiber column based DNA extraction followed by TaqMan Real Time PCR targeted to Sat-DNA (cruzi 1/cruzi 2 and cruzi 3 TaqMan probe) and the fourth method (LbQ) used solvent DNA extraction followed by conventional hot-start PCR targeted to kDNA (primer pairs 121/122). These four methods were further evaluated at the coordinating laboratory in a subset of human blood samples, confirming the performance obtained by the participating laboratories.

Conclusion/Significance

This study represents a first crucial step towards international validation of PCR procedures for detection of T. cruzi in human blood samples.     

Stimulation of transposition of the Mycobacterium tuberculosis insertion sequence IS6110 by exposure to a microaerobic environment

The Mycobacterium tuberculosis-specific insertion sequence IS6110/986 has been widely used as a probe because of the multiple polymorphism observed among different strains. To investigate transposition of IS6110, a series of artificially constructed composite transposons containing IS6110 and a kanamycin resistance marker were constructed. The composite transposons were inserted into a conditionally replicating, thermosensitive, Escherichia coli-mycobacterial shuttle vector and introduced into M. smegmatis mc2155. Lawns of transformants were grown at the permissive temperature on kanamycin-supplemented agar and subsequently prevented from further growth by shifting to the non-permissive temperature. Under normal atmospheric conditions, kanamycin-resistant papillae appeared after only about 5-6 weeks of incubation. However, these events were not associated with transposon mobilization. In contrast, lawns that were exposed to a 48 h microaerobic shock generated kanamycin-resistant papillae after only 6-14 days. These events were generated by conservative transposition of the IS6110 composite transposon into the M. smegmatis chromosome, with loss of the shuttle vector. In common with other IS3 family elements, transposition of IS6110 is thought to be controlled by translational frameshifting. However, we were unable to detect any significant frameshifting within the putative frameshifting site of IS6110, and the level of frameshifting was not affected by microaerobic incubation. The finding that transposition of IS6110 is stimulated by incubation at reduced oxygen tensions may be relevant to transposition of IS6110 in M. tuberculosis harboured within TB lesions.     

Evolutionary relationships among strains of Mycobacterium tuberculosis with few copies of IS6110

Molecular typing of Mycobacterium tuberculosis by using IS6110 shows low discrimination when there are fewer than five copies of the insertion sequence. Using a collection of such isolates from a study of the epidemiology of tuberculosis in London, we have shown a substantial degree of congruence between IS6110 patterns and both spoligotype and PGRS type. This indicates that the IS6110 types mainly represent distinct families of strains rather than arising through the convergent insertion of IS6110 into favored positions. This is supported by identification of the genomic sites of the insertion of IS6110 in these strains. The combined data enable identification of the putative evolutionary relationships of these strains, comprising three lineages broadly associated with patients born in South Asia (India and Pakistan), Africa, and Europe, respectively. These lineages appear to be quite distinct from M. tuberculosis isolates with multiple copies of IS6110.     

Highly polymorphic variable-number tandem repeats loci for differentiating Beijing genotype strains of Mycobacterium tuberculosis in Shanghai, China

The PCR-based variable-number tandem repeats (VNTR) typing method is a very promising tool for the molecular epidemiological study of Mycobacterium tuberculosis. The discriminatory power of the VNTR loci that were optimized in many previous studies has not been evaluated in Shanghai, an area where Beijing genotype strains dominate. In the present study, we first performed a literature search to identify VNTR loci that were at least 45 bp in length. Second, we determined the Hunter-Gaston discriminatory index (HGI) values of each of the 45 VNTR loci that we identified, using Beijing genotype strains from a 'test set' of isolates from a population with low migration in Chongming Island, Shanghai, China. Third, we optimized two sets of VNTR loci, which we named VNTR-7 and VNTR-16. The HGI value of VNTR-7 was slightly lower than that of IS6110 restriction fragment length polymorphisms (RFLP), and the HGI values of VNTR-16 and IS6110 RFLP were comparable. Our results suggest that VNTR-7, followed by VNTR-16 and IS6110 RFLP, can be used routinely as a tool to discriminate between M. tuberculosis isolates in population-based epidemiologic studies of M. tuberculosis transmission in Shanghai, China.     

Mapping of IS6110 flanking regions in clinical isolates of Mycobacterium tuberculosis demonstrates genome plasticity

Southern hybridization was used in combination with IS6110 insertion-locus-specific probes in a comparative study to determine the structure of chromosomal domains flanking IS6110 elements in clinical isolates of Mycobacterium tuberculosis. The resulting restriction fragment length polymorphism (RFLP) data demonstrated three mutational mechanisms responsible for the polymorphisms observed: IS6110 insertion, chromosomal mutation and deletion. The frequency of IS6110 insertion within many of the chromosomal regions demonstrates that preferential integration regions are common in M. tuberculosis. Mapping the IS6110 insertion positions and chromosomal deletions in relation to the M. tuberculosis H37Rv and M. bovis BCG genome sequences reveals numerous disruptions of predicted open reading frames (ORFs). A phylogenetic tree, based on the mutational data, showed a number of independently evolving lineages of M. tuberculosis, while analysis of the mutational events occurring at each branch point suggests both divergent and convergent evolution. A significant positive correlation was demonstrated between the mutation rate and the frequency of occurrence of different isolates in families of strains, suggesting that evolution may impact on strain 'fitness' or that strain proliferation may increase the chance of mutation. We conclude that the genome of clinical isolates of M. tuberculosis continues to evolve.     

IS6110-mediated deletion polymorphism in the direct repeat region of clinical isolates of Mycobacterium tuberculosis

This study investigates the phenomenon of IS6110-mediated deletion polymorphism in the direct repeat (DR) region of the genome of Mycobacterium tuberculosis. Clinical isolates and their putative predecessors were compared using a combination of DR region restriction fragment length polymorphism, IS6110 DNA fingerprinting, spoligotyping, and DNA sequencing, which allowed the mapping of chromosome structure and deletion junctions. The data suggest that adjacently situated IS6110 elements mediate genome deletion. However, in contrast to previous reports, deletions appear to be mediated by inversely oriented IS6110 elements. This suggests that these events may occur via mechanisms other than RecA-mediated homologous recombination. The results underscore the important role of IS6110-associated deletion hypervariability in driving M. tuberculosis genome evolution.     

Identification of Mycobacterium tuberculosis by PCR-linked reverse hybridization using specific rpoB oligonucleotide probes

A reverse probe hybridization method using two different Mycobacterium tuberculosis-specific rpoB DNA probes in combination was evaluated for the identification of M. tuberculosis culture isolates. Among the 384 isolates tested, 354 strains were identified as M. tuberculosis, which included 37 rifampin-resistant strains, and 30 were nontuberculous mycobacteria (NTM). This result was in accord with partial rpoB sequence analysis and IS6110 polymerase chain reaction (PCR) results, but not with the results of biochemical testing, which produced two false negative results. Because of its high level of sensitivity and specificity, we suggest that M. tuberculosis-specific rpoB probes immobilized on micro-titer well plates or on other solid matrixes can be used efficiently for the rapid and convenient identification of M. tuberculosis.     

A novel Real Time micro PCR based Point-of-Care device for Salmonella detection in human clinical samples

Our POC (Point of Care) device is intended to be a diagnostic tool for routine use in the clinical sector. The validation of the whole procedure, including bacterial genomic DNA isolation and the Real Time detection of Salmonella spp., was conducted on 29 clinical stool samples that had been diagnosed with Salmonella spp. by a routine culture technique. The entire process was achieved in a single microfluidic chip within 35 min. In comparison to the culture reference method that is used in the clinical laboratories, this new device performed well in regards to the analytical parameters of sensitivity, specificity and accuracy. Therefore, the POC device reported in this study proved to be very appropriate for the fully integrated analysis system. To the best of our knowledge, this is the first work to report the sample preparation and followed by Real Time PCR (Polymerase Chain Reaction) on a single 2.5 μl chamber chip for the detection of Salmonella spp. bacteria in stool samples.     

IS6110, a Mycobacterium tuberculosis complex-specific insertion sequence, is also present in the genome of Mycobacterium smegmatis, suggestive of lateral gene transfer among mycobacterial species

IS6110 is an insertion element found exclusively within the members of the Mycobacterium tuberculosis complex (MTBC), and because of this exclusivity, it has become an important diagnostic tool in the identification of MTBC species. The restriction of IS6110 to the MTBC is hypothesized to arise from the inability of these bacteria to exchange DNA. We have identified an IS6110-related element in a strain of Mycobacterium smegmatis. The presence of IS6110 indicates that lateral gene transfer has occurred among mycobacterial species, suggesting that the mycobacterial gene pool is larger than previously suspected.     

结核分枝杆菌中插入序列的研究

用人型复合分枝杆菌的特异插入序列IS6110和IS1081制 备探针,对5种限制性内切酶消化的结核分枝杆菌DNA进行杂交。结果表明,经PvuⅡ酶消化 的结核分枝杆菌DNA,用IS6110制备的探针进行杂交呈现高度多态性,说明IS6110对于人型 复合分枝杆菌分型研究和结核病流行病学研究具有很大价值。用IS6110制备的317bp探针对4 6株人结核分枝杆菌分离株多态性分析研究证实,这些菌株呈现高度DNA多态性,而且所含拷 贝数也极为不同,一般含7～18个拷贝。