The effect of organic nitrogen and glucose on the production of recombinant human insulin-like growth factor in high cell densityEscherichia coli fermentations

Summary Two kinds of fed batch fermentation processes were compared at a 10-liter scale to examine their effect on recombinant human insulin-like growth factor (IGF-1) gene expression inEscherichia coli. The difference between the two processes was the feed medium composition and whether the process used a single or dual feed during the course of the fermentation. In the dual feed system, organic nitrogen was delivered at a higher rate (50 g/h) than in the single feed system (5 g/h). The dual feed process resulted in a significant increase in IGF-1 yield. 30 mg IGF-1/g dry cell weight was synthesized in the dual feed system compared to 3 mg IGF-1/g dry cell weight obtained in the single feed system. The presence of high levels of organic nitrogen during the induction period may enhance IGF-1 synthesis by protecting the IGF-1 from proteolytic degradation. The IGF-1 yield decreased to 17 mg/g dry cell weight when the glucose supply was decreased from 17 g/h to 8 g/h during the induction period; however, an increase in glucose supply from 17 g/h to 50 g/h during the induction period did not enhance the IGF-1 synthesis. Thus, the enhancement of IGF-1 gene expression in the dual feed process was mainly dependent on a high level of organic nitrogen and an appropriate level of glucose in the medium during the induction period.     

Rhamnolipid production in batch and fed-batch fermentation using<Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> BYK-2 KCTC 18012P

The optimization of culture conditions for the bacteriumPseudomonas aeruginosa BYK-2 KCTC 18012P, was performed to increase its rhamnolipid production. The optimum level for carbon, nitrogen sources, temperature and pH, for rhamnolipid production in a flask, were identified as 25 g/L fish oil, 0.01% (w/v) urea, 25 and pH 7.0, respectively. Optimum conditions for batch culture, using a 7-L jar fermentor, were 200 rpm of agitation speed and a 2.0 L/min aeration rate. Under the optimum conditions, on fish oil for 216 h, the final cell and rhamnolipid concentrations were 5.3 g/L and 17.0 g/L respectively. Fed-batch fermentation, with different feeding conditions, was carried out in order to increase, cell growth and rhamnolipid production by thePseudomonas aeruginosa, BYK-2 KCTC 18012P. When 2.5 g of fish oil and 100 mL basal salts medium, containing 0.01% (w/v) urea, were fed intermittently during the fermentation, the final cell and rhamnolipid concentrations at 264 h, were 6.1 and 22.7 g/L respectively. The fed-batch culture resulted in a 1.2-fold increase in the dry cell mass and a 1.3-fold increase in rhamnolipid production, compared to the production of the batch culture. The rhamnolipid production-substrate conversion factor (0.75 g/g) was higher than that of the batch culture (0.68 g/g).     

Repeated pH-stat fed-batch fermentation for rhamnolipid production with indigenous Pseudomonas aeruginosa S2

Rhamnolipid is one of the most commonly used biosurfactants with the ability to reduce the surface tension of water from 72 to 30 mN/m. An indigenous isolate Pseudomonas aeruginosa S2 possessing excellent ability to produce rhamnolipid was used as a model strain to explore fermentation technology for rhamnolipid production. Using optimal medium and operating conditions (37°C, pH 6.8, and 250 rpm agitation) obtained from batch fermentation, P. aeruginosa S2 was able to produce up to 5.31 g/l of rhamnolipid from glucose-based medium. To further improve the rhamnolipid yield, a pH-stat fed-batch culture was performed by maintaining a constant pH of 6.8 through manipulating glucose feeding. The effect of influent glucose concentration on rhamnolipid yield and productivity was investigated. Using the pH-stat culture, a maximum rhamnolipid concentration (6.06 g/l) and production rate (172.5 ml/h/l) was obtained with 6% glucose in the feed. Moreover, combining pH-stat culture with fill-and-draw operation allowed a stable repeated fed-batch operation for approximately 500 h. A marked increase in rhamnolipid production was achieved, leading to the best rhamnolipid yield of approximately 9.4 g/l during the second repeated run.     

Effects of temperature shift strategies on human preproinsulin production in the fed-batch fermentation of recombinant<Emphasis Type="Italic">Escherichia coli</Emphasis>

Preproinsulin is a well-known precursor of human insulin for the regulation of blood glucose levels. In this study, fed-batch fermentations of recombinantEscherichia coli JM109/pPT-MRpi were carried out for the overexpression of human preproinsulin. The expression of human preproinsulin was controlled by the temperature inducibleP2 promoter. The time-course profiles of fed-batch fermentation and SDS-PAGE analysis showed that human insulin expression was triggered by a culture temperature change from 30 to 37°C. Fermentation shift strategies, including the multi-step increase of temperature and the modulation of initiation time, were optimized to obtain high titers of cell mass and preproinsulin. The optimized fed-batch fermentation, consisting of a three-step shift of culture temperature from 30 to 37°C for 2 h, gave the best results of 43.1 g/L of dry cell weight and 33.3% preproinsulin content, which corresponded to 2.0- and 1.2-fold increases, respectively, as compared to those of fed-batch culture at a constant temperature of 37°C.     

Phytase production by fermentation of recombinant Pichia pastoris in monosodium glutamate wastewater

A novel method is proposed to produce both phytase and single-cell protein in recombinant Pichia pastoris fermentation using monosodium glutamate wastewater (MSGW) as the basal medium. Recombinant P. pastoris MR33 transformed with a phytase gene (AppA-m) from Escherichia coli was constructed and showed capability to utilize ammonium as the only nitrogen source. The fermentation medium was optimized in shake flasks by single-factor test and response surface methodology. A fed-batch system containing 30% MSGW, 50 g/l glucose, 1.58 g/l CaSO₄, 5.18 g/l MgSO₄ and 6.67 g/l KH₂PO₄ was developed in a 3.7-l bioreactor. The maximum phytase activity in the MSGW medium reached 3,380 U/ml, 84.2% of that in chemically defined medium, and the dry cell weight was 136 g/l. The single-cell protein (SCP; 46.66% dry cell weight) contains a variety of amino acids and is low in fat, which is ideal for utilization in animal feed. Thus, it is feasible to use MSGW medium for the production of enzymes that can be expressed in P. pastoris.     

Influence of sugar source (lactose,glucose, galactose) on 2,3-butanediol production by Klebsiella oxytoca NRRL-B199

The ability of Klebsiella oxytoca NRRL-B199 to use either lactose or the mixture of glucose and galactose as substrate for the production of 2,3-butanediol was studied in batch fermentations with different conditions of aeration and pH. 2,3-butanediol was undetected, or present in minute concentration in the fermentation broths with lactose, while it was the main product from glucose+galactose with final concentrations of up to 18.8 g/l in media at pH 6.0. Under conditions optimal for 2,3-butanediol synthesis, when aeration limited growth, the rate of biomass growth was more tightly related to the aeration rate in lactose medium than in glucose+galactose medium. These relations suggest that the growth rate is very low on lactose but still considerable on glucose+galactose when aeration rate tends toward zero. Correspondingly, the metabolism is more oxidative in the former medium, yielding mainly acetate as product.Abbreviations CDW cell dry weight     

Determination of Growth and Glycerol Production Kinetics of a Wine Yeast Strain Saccharomyces cerevisiae Kalecik 1 in Different Substrate Media

Summary Glycerol has been known as an important by-product of wine fermentations improving the sensory quality of wine. This study was carried out with an endogenic wine yeast strain Saccharomyces cerevisiae Kalecik 1. The kinetics of growth and glycerol biosynthesis were analysed at various initial concentrations of glucose, fructose, and sucrose in a batch system. Depending on the determined values of Monod constants, glucose (K_s = 28.09 g/l) was found as the most suitable substrate for the yeast growth. Initial glucose, fructose and sucrose concentrations necessary for maximum specific yeast growth rate were determined as 175 g, 100 l, and 200 g/l, respectively. The yeast produced glycerol at very high concentrations in fructose medium. Fructose was determined as the most suitable substrate for glycerol production while the strain showed low tendency to use it for growth. S. cerevisiae Kalecik 1 could not produce glycerol below 200 g/l initial sucrose concentration. When natural white grape juice was used as fermentation medium, maximum glycerol concentration and dry weight of the yeast were determined as 9.3 g/l and 11.8 g/l, respectively.     

Influence of temperature on the production of an archaeal thermoactive alcohol dehydrogenase from Pyrococcus furiosus with recombinant Escherichia coli

The heterologous production of a thermoactive alcohol dehydrogenase (AdhC) from Pyrococcus furiosus in Escherichia coli was investigated. E. coli was grown in a fed-batch bioreactor in minimal medium to high cell densities (cell dry weight 76 g/l, OD₆₀₀ of 150). Different cultivation strategies were applied to optimize the production of active AdhC, such as lowering the cultivation temperature from 37 to 28°C, heat shock of the culture from 37 to 42°C and from 37 to 45°C, and variation of time of induction (induction at an OD₆₀₀ of 40, 80 and 120). In addition to the production of active intracellular protein, inclusion bodies were always observed. The maximal activity of 30 U/l (corresponding to 6 mg/l active protein) was obtained after a heat shock from 37 to 42°C, and IPTG induction of the adhC expression at an OD₆₀₀ of 120. Although no general rules can be provided, some of the here presented variations may be applicable for the optimization of the heterologous production of proteins in general, and of thermozymes in particular.     

Single-cell protein production from Jerusalem artichoke extract by a recently isolated marine yeast <Emphasis Type="Italic">Cryptococcus aureus</Emphasis> G7a and its nutritive analysis

After crude protein of the marine yeast strains maintained in this laboratory was estimated by the method of Kjehldahl, we found that the G7a strain which was identified to be a strain of Cryptococcus aureus according to the routine identification and molecular methods contained high level of protein and could grow on a wide range of carbon sources. The optimal medium for single-cell protein production was seawater containing 6.0 g of wet weight of Jerusalem artichoke extract per 100 ml of medium and 4.0 g of the hydrolysate of soybean meal per 100 ml of medium, while the optimal conditions for single-cell protein production were pH 5.0 and 28.0°C. After fermentation for 56 h, 10.1 g of cell dry weight per liter of medium and 53.0 g of crude protein per 100 g of cell dry weight (5.4 g/l of medium) were achieved, leaving 0.05 g of reducing sugar per 100 ml of medium and 0.072 g of total sugar per 100 ml of medium total sugar in the fermented medium. The yeast strain only contained 2.1 g of nucleic acid per 100 g of cell dry weight, but its cells contained a large amount of C_16:0 (19.0%), C_18:0 (46.3%), and C_18:1 (33.3%) fatty acids and had a large amount of essential amino acids, especially lysine (12.6%) and leucine (9.1%), and vitamin C (2.2 mg per 100 g of cell dry weight). These results show that the new marine yeast strain was suitable for single-cell protein production.     

Scale-up fermentation of recombinant <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase expressed in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using the GAP promoter

The high-cell-density fermentation of Candida rugosa lipase in the constitutive Pichia pastoris expression system was scaled up from 5 to 800 l in series by optimizing the fermentation conditions at both lab scale and pilot scale. The exponential feeding combined with pH-stat strategy succeeded in small scale studies, while a two-stage fermentation strategy, which shifted at 48 h by fine tuning the culture temperature and pH, was assessed effective in pilot-scale fermentation. The two-stage strategy made an excellent balance between the expression of heterogeneous protein and the growth of host cells, controlling the fermentation at a relatively low cell growth rate for the constitutive yeast expression system to accumulate high-level product. A stable lipase activity of approximately 14,000 IU ml⁻¹ and a cell wet weight of ca. 500 g l⁻¹ at the 800-l scale were obtained. The efficient and convenient techniques suggested in this study might facilitate further scale-up for industrial lipase production.     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli arcA</Emphasis> mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the 'one-factor-at-a-time' technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett-Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box-Wilson design. Under such optimized conditions (22.02 g l(-1) glycerol, 1.78 g l(-1) CAS, and 1.83 g l(-1) inoculum) microaerobic batch cultures gave rise to 8.37 g l(-1) CDW and 3.52 g l(-1) PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l(-1). After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l(-1), respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures.     

Gene expression usingnar promoter under anaerobic condition with recombinantE. coli

Thenar promoter as an inducible promoter was characterized for the process development for the gene expression and the protein production under anaerobic condition. The LB medium was selected as a main culture medium showing the enzyme activity of 18,000 units/min/g cell in the flask cultivation. The optimum concentration of nitrate was 1%. Under anaerobic conditions, the gene expression was fully induced in the presence of nitrate.     

Heat-Induced Production of Human Growth Hormone by High Cell Density Cultivation of Recombinant Escherichia Coli

The temperature-induced, over-expression of the human growth hormone gene in a recombinant E. coli during high cell density cultivation is reported. Human growth hormone (hGH) production and stability were tested under different heat shock conditions. Cell densities were 25 and 60 g l(-1) in a pH-stat fed-batch mode in defined and complex medium, respectively, and the fermentation time was decreased from 41 to 32 h. hGH was produced at 2 g l(-1) in complex medium. By using glycerol as main carbon source in the complex medium with exponential feeding, cell density and hGH production were increased to 100 g l(-1) and 2.7 g l(-1), respectively.     

Production of poly-3-hydroxybutyrate by Bacillus sp. JMa5 cultivated in molasses media

A strain of Bacillus sp. coded JMa5 was isolated from molasses contaminated soil. The strain was able to grow at a temperature as high as 45°C and in 250 g/l molasses although the optimal growth temperature was 35–37°C. Cell density reached 30 g/l 8 h after inoculation in a batch culture with an initial concentration of 210 g/l molasses. Under fed-batch conditions, the cells grew to a dry weight of 70 g/l after 30 h of fermentation. The strain accumulated 25–35%, (w/w) polyhydroxybutyrate (PHB) during fermentation. PHB accumulation was a growth-associated process. Factors that normally promote PHB production include high ratios of carbon to nitrogen, and carbon to phosphorus in growth media. Low dissolved oxygen supply resulted in sporulation, which reduced PHB contents and dry weights of the cells. It seems that sporulation induced by reduced supply of nutrients is the reason that PHB content is generally low in the Bacillus strain.     

A study of polynucleotide phosphorylase production by <Emphasis Type="Italic">Escherichia coli</Emphasis> in a hollow fibre reactor

A 30-l hollow fibre reactor with continuous fermentation for cell recycling of Escherichia coli AS 1.183 was used to remove the inhibitory effects on cell growth and extend the fast growth phase to increase the yield of polynucleotide phosphorylase (PNPase) in E. coli cells. When the dilution rate was 1.5 h⁻¹, the cell concentration of E. coli reached 235 g/l (wet wt, 70% moisture content), with PNPase activity above 90 u/g (wet wt). With the dilution rate is 1.0 h⁻¹, the fermentor volumetric productivity of PNPase in a hollow fiber reactor can reach 974 (u/h * l) compared to 20 (u/h * l) in a conventional batch culture.     

Production of poly(3-hydroxybutyrate) from whey by fed-batch culture of recombinant Escherichia coli in a pilot-scale fermenter

Production of poly(3-hydroxybutyrate) [P(3HB)] from wheyby fed-batch culture of recombinant Escherichia coli CGSC 4401 harboring a plasmid containing the Alcaligenes latus polyhydroxyalkanoate (PHA) biosynthesis genes was examined in a 30 l fermenter supplying air only. With lactose below 2 g l^–1, cells grew to 12 g dry cell l^–1 with 9% (w/w) P(3HB) content. Accumulation of P(3HB) could be triggered by increasing lactose to 20 g l^–1. By employing this strategy, 51 g dry cell l^–1 was obtained with a 70% (w/w) P(3HB) content after 26 h. The productivity was 1.35 g P(3HB) l^–1 h^–1. The same fermentation strategy was used in a 300 l fermenter, and 30 g dry cell l^–1 with 67% (w/w) P(3HB) content was obtained in 20 h.     

Co-fermentation of a mixture of glucose and xylose to ethanol by Zymomonas mobilis and Pachysolen tannophilus

This research was designed to maximize ethanol production from a glucose-xylose sugar mixture (simulating a sugar cane bagasse hydrolysate) by co-fermentation with Zymomonas mobilis and Pachysolen tannophilus. The volumetric ethanol productivity of Z. mobilis with 50 g glucose/l was 2.87 g/l/h, giving an ethanol yield of 0.50 g/g glucose, which is 98% of the theoretical. P. tannophilus when cultured on 50 g xylose/l gave a volumetric ethanol productivity of 0.10 g/l/h with an ethanol yield of 0.15 g/g xylose, which is 29% of the theoretical. On optimization of the co-fermentation with the sugar mixture (60 g glucose/l and 40 g xylose/l) a total ethanol yield of 0.33 g/g sugar mixture, which is 65% of the theoretical yield, was obtained. The co-fermentation increased the ethanol yield from xylose to 0.17 g/g. Glucose and xylose were completely utilized and no residual sugar was detected in the medium at the end of the fermentation. The pH of the medium was found to be a good indicator of the fermentation status. The optimum conditions were a temperature of 30°C, initial inoculation with Z. mobilis and incubation with no aeration, inactivation of bacterium after the utilization of glucose, followed by inoculation with P. tannophilus and incubation with limited aeration.     

Fermentation of sugar cane bagasse hemicellulosic hydrolysate and sugar mixtures to ethanol by recombinant Escherichia coli KO11

Escherichia coli KO11, carrying the ethanol pathway genes pdc (pyruvate decarboxylase) and adh (alcohol dehydrogenase) from Zymomonas mobilis integrated into its chromosome, has the ability to metabolize pentoses and hexoses to ethanol, both in synthetic medium and in hemicellulosic hydrolysates. In the fermentation of sugar mixtures simulating hemicellulose hydrolysate sugar composition (10.0 g of glucose/l and 40.0 g of xylose/l) and supplemented with tryptone and yeast extract, recombinant bacteria produced 24.58 g of ethanol/l, equivalent to 96.4% of the maximum theoretical yield. Corn steep powder (CSP), a byproduct of the corn starch-processing industry, was used to replace tryptone and yeast extract. At a concentration of 12.5 g/l, it was able to support the fermentation of glucose (80.0 g/l) to ethanol, with both ethanol yield and volumetric productivity comparable to those obtained with fermentation media containing tryptone and yeast extract. Hemicellulose hydrolysate of sugar cane bagasse supplemented with tryptone and yeast extract was also readily fermented to ethanol within 48 h, and ethanol yield achieved 91.5% of the theoretical maximum conversion efficiency. However, fermentation of bagasse hydrolysate supplemented with 12.5 g of CSP/l took twice as long to complete. This revised version was published online in November 2006 with corrections to the Cover Date.     

Alanine production in an H+-ATPase- and lactate dehydrogenase-defective mutant of Escherichia coli expressing alanine dehydrogenase

Previously, we reported that pyruvate production was markedly improved in TBLA-1, an H⁺-ATPase-defective Escherichia coli mutant derived from W1485lip2, a pyruvate-producing E. coli K-12 strain. TBLA-1 produced more than 30 g/l pyruvate from 50 g/l glucose by jar fermentation, while W1485lip2 produced only 25 g/l pyruvate (Yokota et al. in Biosci Biotechnol Biochem 58:2164–2167, 1994b). In this study, we tested the ability of TBLA-1 to produce alanine by fermentation. The alanine dehydrogenase (ADH) gene from Bacillus stearothermophilus was introduced into TBLA-1, and direct fermentation of alanine from glucose was carried out. However, a considerable amount of lactate was also produced. To reduce lactate accumulation, we knocked out the lactate dehydrogenase gene (ldhA) in TBLA-1. This alanine dehydrogenase-expressing and lactate dehydrogenase-defective mutant of TBLA-1 produced 20 g/l alanine from 50 g/l glucose after 24 h of fermentation. The molar conversion ratio of glucose to alanine was 41%, which is the highest level of alanine production reported to date. This is the first report to show that an H⁺-ATPase-defective mutant of E. coli can be used for amino acid production. Our results further indicate that H⁺-ATPase-defective mutants may be used for fermentative production of various compounds, including alanine.     

Improvement of the conversion of polystyrene to polyhydroxyalkanoate through the manipulation of the microbial aspect of the process: a nitrogen feeding strategy for bacterial cells in a stirred tank reactor

Pseudomonas putida CA-3 has been shown to accumulate the biodegradable plastic polyhydroxyalkanoate (PHA) when fed styrene or polystyrene pyrolysis oil as the sole carbon and energy source under nitrogen limiting growth conditions (67 mg nitrogen per litre at time 0). Batch fermentation of P. putida CA-3 grown on styrene or polystyrene pyrolysis oil in a stirred tank reactor yields PHA at 30% of the cell dry weight (CDW). The feeding of nitrogen at a rate of 1mg N/l/h resulted in a 1.1-fold increase in the percentage of CDW accumulated as PHA. An increase in the rate of nitrogen feeding up to 1.5mg N/l/h resulted in further increases in the percentage of the cell dry weight composed of PHA. However, feeding rates of 1.75 and 2mg N/l/h resulted in dramatic decreases in the percentage of cell dry weight composed of PHA. Interestingly nitrogen was not detectable in the growth medium after 16 h, in any of the growth conditions tested. A higher cell density was observed in cells supplied with nitrogen and thus further increases in the overall production of PHA were observed through nitrogen feeding. The highest yield of PHA was 0.28 g PHA per g styrene supplied with a nitrogen feeding rate of 1.5mg/l/h.