Cell-based assay for high-throughput quantitative screening of CFTR chloride transport agonists

Drug discovery by high-throughput screening is a promising approach to develop new therapies for the most common lethal genetic disease, cystic fibrosis. Because disease-causing mutations of the cystic fibrosis transmembrane conductance regulator (CFTR) protein produce epithelial cells with reduced or absent Cl(-) permeability, the goal of screening is to identify compounds that restore cell Cl(-) transport. We have developed a rapid, quantitative screening procedure for analysis of CFTR-mediated halide transport in cells with the use of a conventional fluorescence plate reader. Doubly transfected cell lines were generated that express wild-type or mutant CFTR together with a yellow fluorescent protein (YFP)-based halide sensor. CFTR function was assayed from the time course of cell fluorescence in response to extracellular addition of 100 mM I(-) followed by forskolin, resulting in decreased YFP fluorescence due to CFTR-mediated I(-) entry. Cell lines were chosen, and conditions were optimized to minimize basal halide transport to maximize assay sensitivity. In cells cultured on 96-well plastic dishes, the assay gave reproducible halide permeabilities from well to well and could reliably detect a 2% activation of CFTR-dependent halide transport produced by low concentrations of forskolin. Applications of the assay are shown, including comparative dose-dependent CFTR activation by genistein, apigenin, 8-cyclopentyl-1,3-dipropylxanthine, IBMX, 8-methoxypsoralen, and milrinone as well as activation of alternative Cl(-) channels. The fluorescence assay and cell lines should facilitate the screening of novel CFTR activators and the characterization of alternative Cl(-) channels and transporters.     

Influence of growth rate and sodium chloride concentration on the phospholipid composition of Pseudomonas fragi

Abstract A new assay for dehalogenase enzymes has been developed, based on the determination of halide ion concentration in assay samples by ion chromatography. The ion chromatograph is sensitive enough to allow routine measurement of chloride ions (C1⁻) down to 5 ng/sample (i.e. 50 μl of 0.1 ppm solution) and was used to determine the apparent Michaelis constant for d -2-chloropropionate of the d -2-halopropionate dehalogenase from Pseudomonas putida AJ1/23.     

Haloalkane dehalogenases: steady-state kinetics and halide inhibition

The substrate specificities and product inhibition patterns of haloalkane dehalogenases from Xanthobacter autotrophicus GJ10 (XaDHL) and Rhodococcus rhodochrous (RrDHL) have been compared using a pH-indicator dye assay. In contrast to XaDHL, RrDHL is efficient toward secondary alkyl halides. Using steady-state kinetics, we have shown that halides are uncompetitive inhibitors of XaDHL with 1, 2-dichloroethane as the varied substrate at pH 8.2 (Cl-, Kii = 19 +/- 0.91; Br-, Kii = 2.5 +/- 0.19 mM; I-, Kii = 4.1 +/- 0.43 mM). Because they are uncompetitive with the substrate, halide ions do not bind to the free form of the enzyme; therefore, halide ions cannot be the last product released from the enzyme. The Kii for chloride was pH dependent and decreased more than 20-fold from 61 mM at pH 8.9 to 2.9 mM at pH 6.5. The pH dependence of 1/Kii showed simple titration behavior that fit to a pKa of approximately 7.5. The kcat was maximal at pH 8.2 and decreased at lower pH. A titration of kcat versus pH also fits to a pKa of approximately 7.5. Taken together, these data suggest that chloride binding and kcat are affected by the same ionizable group, likely the imidazole of a histidyl residue. In contrast, halides do not inhibit RrDHL. The Rhodococcus enzyme does not contain a tryptophan corresponding to W175 of XaDHL, which has been implicated in halide ion binding. The site-directed mutants W175F and W175Y of XaDHL were prepared and tested for halide ion inhibition. Halides do not inhibit either W175F or W175Y XaDHL.     

The impacts of new street light technologies: experimentally testing the effects on bats of changing from low-pressure sodium to white metal halide

Artificial light at night is a major feature of anthropogenic global change and is increasingly recognized as affecting biodiversity, often negatively. On a global scale, newer technology white lights are replacing orange sodium lights to reduce energy waste. In 2009, Cornwall County Council (UK) commenced replacement of existing low-pressure sodium (LPS) high intensity discharge (HID) street lights with new Phillips CosmoPolis white ceramic metal halide street lights to reduce energy wastage. This changeover provided a unique collaborative opportunity to implement a before-after-control-impact field experiment to investigate the ecological effects of newly installed broad spectrum light technologies. Activity of the bat species Pipistrellus pipistrellus, P. pygmaeus and Nyctalus/Eptesicus spp. was significantly higher at metal halide than LPS lights, as found in other studies of bat activity at old technology (i.e. mercury vapour) white light types. No significant difference was found in feeding attempts per bat pass between light types, though more passes overall were recorded at metal halide lights. Species-specific attraction of bats to the metal halide lights could have cascading effects at lower trophic levels. We highlight the need for further research on possible ecosystem-level effects of light technologies before they are installed on a wide scale.     

Indolizine 1-sulfonates as potent inhibitors of 15-lipoxygenase from soybeans

A number of indolizine 1-sulfonates have been prepared by cyclization of cyclopropenones with pyridines followed by trapping of the intermediate 1-indolizinol with a sulfonyl halide, and examined as inhibitors of 15-lipoxygenase (15-LO). The compounds display IC(50) values between 15 and 42 microM; all are more active than the well-known 15-LO inhibitor quercetin (IC(50) 51 microM). A wide variety of substituents are well tolerated. The enzyme inhibition was not affected by preincubation or the presence of a detergent and no significant particle formation was observed. Hence, inhibition from aggregates of indolizines, promiscuous inhibition, is highly unlikely.     

Formation of reactive halide species by myeloperoxidase and eosinophil peroxidase

The formation of chloro- and bromohydrins from 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine following incubation with myeloperoxidase or eosinophil peroxidase in the presence of hydrogen peroxide, chloride and/or bromide was analysed by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry. These products were only formed below a certain pH threshold value, that increased with increasing halide concentration. Thermodynamic considerations on halide and pH dependencies of reduction potentials of all redox couples showed that the formation of a given reactive halide species in halide oxidation coupled with the reduction of compound I of heme peroxidases is only possible below a certain pH threshold that depends on halide concentration. The comparison of experimentally derived and calculated data revealed that Cl(2), Br(2), or BrCl will primarily be formed by the myeloperoxidase-H(2)O(2)-halide system. However, the eosinophil peroxidase-H(2)O(2)-halide system forms directly HOCl and HOBr.     

3-(2-Benzyloxyphenyl)isoxazoles and isoxazolines: synthesis and evaluation as CFTR activators

A novel class of activators for chloride conductance in the cystic fibrosis transmembrane conductance regulator (CFTR) protein has been identified. These 3-(2-benzyloxyphenyl)isoxazoles and 3-(2-benzyloxyphenyl)isoxazolines were synthesized employing the 1,3-dipolar cycloaddition of nitrile oxides with various alkene and alkyne dipolarophiles. Utilizing a fluorescence cell-based assay of halide transport, the best compounds increased CFTR-dependent chloride transport with half-maximal stimulation at 20-50 microM.     

Assay method for myeloperoxidase in human polymorphonuclear leukocytes

A simple assay method for measuring myeloperoxidase (MPO) has been developed. MPO is found in polymorphonuclear leukocytes and is important as a bactericidal agent in the presence of H2O2 and halide ions. This improved assay method is based on work of Andrews and Krinsky using tetramethylbenzidine (TMB) a noncarcinogenic substrate. By assaying MPO under optimal conditions of TMB at 1.6 mM, H2O2 concentration of 0.3 mM, pH 5.4, and incubation temperature of 37 degrees C, sensitivity of MPO measurements increased eightfold in comparison with the original TMB method. A method has been established to determine absorbance at 655 nm of the reaction mixture by incubation for 3 min and then stopping the reaction by the addition of pH 3.0 buffer. An attempt was also made to raise the sensitivity by using 3,3'-dimethyoxybenzidine (DMB), a carcinogenic substrate. The improved TMB method was 34 times more sensitive than the DMB method.     

Living nanocatalyst for effective synthesis of symmetrical biaryls

A convenient procedure is described for the synthesis of symmetrical biaryls via Ullmann coupling reaction catalyzed by palladium nanoparticles stabilized in a polymer matrix. A wide range of aryl halide substrates is transformed into corresponding symmetrical biaryls at a mild reaction condition. Living nature of the nanocatalysts is revealed by in situ recycling methodology and transmission electron microscopy (TEM). Calculation based on density functional theory (DFT) was performed to have better insight on mechanistic cycle and the result was supported by experimental evidence. Preliminary investigation also reveals that these PdNPs act as efficient catalyst in Heck and copper free Sonogashira reactions.     

Polarons in Metal Halide Perovskites

The peculiar optoelectronic properties of metal‐halide perovskites, partly underlying their success in solar cells and light emitting devices, are likely related to the complex interplay of electronic and structural features mediated by formation of polarons. In this paper the current status of polaron physics in metal‐halide perovskites is reviewed based on a first‐principles computational perspective, which has delivered hitherto noaccessible insights into the electronic and structural features associated with polaron formation in this materials class. The role of organic (dipolar) versus inorganic (spherical) A‐site cations is extensively analyzed, these cations are related to modulation of the energetics and structural extension of polarons in lead‐halide perovskites. Further tuning of polaron energetics is achieved by individual variations in metal (e.g., Pb → Sn) and halide (e.g., I → Br), showing a transition from a semilocalized to a localized polaron regime in which charge holes can be trapped at isolated Sn centers. The vastly varying and tunable nature of charge lattice interactions represents a peculiarity of metal‐halide perovskites that should be taken into account when designing novel materials or targeting specific compositional engineering of existing perovskites.     

Crystallographic and kinetic evidence of a collision complex formed during halide import in haloalkane dehalogenase.

Haloalkane dehalogenase (DhlA) converts haloalkanes to their corresponding alcohols and halide ions. The rate-limiting step in the reaction of DhlA is the release of the halide ion. The kinetics of halide release have been analyzed by measuring halide binding with stopped-flow fluorescence experiments. At high halide concentrations, halide import occurs predominantly via the rapid formation of a weak initial collision complex, followed by transport of the ion to the active site. To obtain more insight in this collision complex, we determined the X-ray structure of DhlA in the presence of bromide and investigated the kinetics of mutants that were constructed on the basis of this structure. The X-ray structure revealed one bromide ion firmly bound in the active site and two bromide ions weakly bound on the surface of the enzyme. One of the weakly bound ions is close to Thr197 and Phe294, near the entrance of the earlier proposed tunnel for substrate import. Kinetic analysis of bromide import by the Thr197Ala and Phe294Ala mutants of DhlA at high halide concentration showed that the rate constants for halide binding no longer displayed a wild-type-like parabolic increase with increasing bromide concentrations. This is in agreement with an elimination or a decrease in affinity of the surface-located halide-binding site. Likewise, chloride binding kinetics of the mutants indicated significant differences with wild-type enzyme. The results indicate that Thr197 and Phe294 are involved in the formation of an initial collision complex for halide import in DhlA and provide experimental evidence for the role of the tunnel in substrate and product transport.     

Lead Halide Perovskite Nanocrystals: Room Temperature Syntheses toward Commercial Viability

In this progress report, recent improvements to the room temperaturesyntheses of lead halide perovskite nanocrystals (APbX₃, X = Cl, Br, I) are assessed, focusing on various aspects which influence the commercial viability of the technology. Perovskite nanocrystals can be prepared easily from low‐cost precursors under ambient conditions, yet they have displayed near‐unity photoluminescence quantum yield with narrow, highly tunable emission peaks. In addition to their impressive ambipolar charge carrier mobilities, these properties make lead halide perovskite nanocrystals very attractive for light‐emitting diode (LED) applications. However, there are still many practical hurdles preventing commercialization. Recent developments in room temperature synthesis and purification protocols are reviewed, closely evaluating the suitability of particular techniques for industry. This is followed by an assessment of the wide range of ligands deployed on perovskite nanocrystal surfaces, analyzing their impact on colloidal stability, as well as LED efficiency. Based on these observations, a perspective on important future research directions that can expedite the industrial adoption of perovskite nanocrystals is provided.     

Studies of the effect of halide ions on the fluorescence of quinine sulfate

The effect of halide ions (Cl^?, Br^? and I^?) on the fluorescence of quinine sulfate in dilute sulfuric acid solution was studied by fluorescence spectra, ultraviolet‐visible (UV‐visible) absorption spectra and fluorescence decay technique. The results exhibited that halide ions with heavier atomic mass could significantly reduce the fluorescence intensity of quinine sulfate, as a result, the order of fluorescence quenching caused by halide ions is Cl^? < Br^? < I^?. Therefore, halide ions with high concentration could seriously quench the fluorescence of quinine sulfate. The UV‐visible absorption spectra and fluorescence decay technique revealed that the fluorescence quenching of quinine sulfate caused by halide ions was attributed to dynamic quenching, static quenching process, self‐quenching fluorescence effect and electronic transfer.     

Understanding Molecular Structures of Buried Interfaces in Halide Perovskite Photovoltaic Devices Nondestructively with Sub‐Monolayer Sensitivity Using Sum Frequency Generation Vibrational Spectroscopy

As performance of halide perovskite devices progresses, the device structure becomes more complex with more layers. Molecular interfacial structures between different layers play an increasingly important role in determining the overall performance in a halide perovskite device. However, current understanding of such interfacial structures at a molecular level nondestructively is limited, partially due to a lack of appropriate analytical tools to probe buried interfacial molecular structures in situ. Here, sum frequency generation (SFG) vibrational spectroscopy, a state‐of‐the‐art nonlinear interface sensitive spectroscopy, is introduced to the halide perovskite research community and is presented as a powerful tool to understand molecule behavior at buried halide perovskite interfaces in situ. It is found that interfacial molecular orientations revealed by SFG can be directly correlated to halide perovskite device performance. Here how SFG can examine molecular structures (e.g., orientations) at the perovskite/hole transporting layer and perovskite/electron transporting layer interfaces is discussed. This will promote the use of SFG to investigate molecular structures of buried interfaces in various halide perovskite materials and devices in situ nondestructively with a sub‐monolayer interface sensitivity. Such research will help to elucidate structure–function relationships of buried interfaces, aiding in the rational design/development of halide perovskite materials/devices with improved performance.     

Halide peroxidase in tissues that interact with bacteria in the host squid Euprymna scolopes

An enzyme with similarities to myeloperoxidase, the antimicrobial halide peroxidase in mammalian neutrophils, occurs abundantly in the light organ tissue of Euprymna scolopes, a squid that maintains a beneficial association with the luminous bacterium Vibrio fischeri. Using three independent assays typically applied to the analysis of halide peroxidase enzymes, we directly compared the activity of the squid enzyme with that of human myeloperoxidase. One of these methods, the diethanolamine assay, confirmed that the squid peroxidase requires halide ions for its activity. The identification of a halide peroxidase in a cooperative bacterial association suggested that this type of enzyme can function not only to control pathogens, but also to modulate the interactions of host animals with their beneficial partners. To determine whether the squid peroxidase functions under both circumstances, we examined its distribution in a variety of host tissues, including those that typically interact with bacteria and those that do not. Tissues interacting with bacteria included those that have specific cooperative associations with bacteria (i.e., the light organ and accessory nidamental gland) and those that have transient nonspecific interactions with bacteria (i.e., the gills, which clear the cephalopod circulatory system of invading microorganisms). These bacteria-associated tissues were compared with the eye, digestive gland, white body, and ink-producing tissues, which do not typically interact directly with bacteria. Peroxidase enzyme assays, immunocytochemical localization, and DNA-RNA hybridizations showed that the halide-dependent peroxidase is consistently expressed in high concentration in tissues that interact bacteria. Elevated levels of the peroxidase were also found in the ink-producing tissues, which are known to have enzymatic pathways associated with antimicrobial activity. Taken together, these data suggest that the host uses a common biochemical response to the variety of types of associations that it forms with microorganisms.     

Stereoselective glycosylations using benzoylated glucosyl halides with inexpensive promoters

Reactions of O-benzoylated glucopyranosyl halide (I, Br), isolated or generated in situ from per-benzoylated glucose (8a) and trimethylsilyl halide, with various alcohols were efficiently promoted by zinc halide (Cl, Br) or N-bromosuccinimide with a catalytic ZnI₂ to give the corresponding 1,2-trans-β-glucosides in good to high yields. When the anomeric halogenation of 8a was carried out in the presence of reactive alcohols, 1,2-cis--glucosides were selectively formed.     

Grafting of antibacterial polymers on stainless steel via surface‐initiated atom transfer radical polymerization for inhibiting biocorrosion by Desulfovibrio desulfuricans

To enhance the biocorrosion resistance of stainless steel (SS) and to impart its surface with bactericidal function for inhibiting bacterial adhesion and biofilm formation, well‐defined functional polymer brushes were grafted via surface‐initiated atom transfer radical polymerization (ATRP) from SS substrates. The trichlorosilane coupling agent, containing the alkyl halide ATRP initiator, was first immobilized on the hydroxylated SS (SS‐OH) substrates for surface‐initiated ATRP of (2‐dimethylamino)ethyl methacrylate (DMAEMA). The tertiary amino groups of covalently immobilized DMAEMA polymer or P(DMAEMA), brushes on the SS substrates were quaternized with benzyl halide to produce the biocidal functionality. Alternatively, covalent coupling of viologen moieties to the tertiary amino groups of P(DMAEMA) brushes on the SS surface resulted in an increase in surface concentration of quaternary ammonium groups, accompanied by substantially enhanced antibacterial and anticorrosion capabilities against Desulfovibrio desulfuricans in anaerobic seawater, as revealed by antibacterial assay and electrochemical studies. With the inherent advantages of high corrosion resistance of SS, and the good antibacterial and anticorrosion capabilities of the viologen‐quaternized P(DMAEMA) brushes, the functionalized SS is potentially useful in harsh seawater environments and for desalination plants. Biotechnol. Bioeng. 2009;103: 268–281. © 2009 Wiley Periodicals, Inc.     

Reducing Saturation‐Current Density to Realize High‐Efficiency Low‐Bandgap Mixed Tin–Lead Halide Perovskite Solar Cells

The unsatisfactory performance of low‐bandgap mixed tin (Sn)–lead (Pb) halide perovskite subcells has been one of the major obstacles hindering the progress of the power conversion efficiencies (PCEs) of all‐perovskite tandem solar cells. By analyzing dark‐current density and distribution, it is identified that charge recombination at grain boundaries is a key factor limiting the performance of low‐bandgap mixed Sn–Pb halide perovskite subcells. It is further found that bromine (Br) incorporation can effectively passivate grain boundaries and lower the dark current density by two–three orders of magnitude. By optimizing the Br concentration, low‐bandgap (1.272 eV) mixed Sn–Pb halide perovskite solar cells are fabricated with open‐circuit voltage deficits as low as 0.384 V and fill factors as high as 75%. The best‐performing device demonstrates a PCE of >19%. The results suggest an important direction for improving the performance of low‐bandgap mixed Sn–Pb halide perovskite solar cells.     

Halide ion inclusion into a dicopper(II) bistren cryptate containing ‘active’ 2,5-dimethylfuran spacers: The origin of the bright yellow colour

The inclusion of halide ions into a dicopper(II) bistren cryptate complex containing 2,5-dimethylfuran spacers has been investigated through spectrophotometric titration experiments in MeCN solution. X-ray diffraction studies on the 1:1 chloride inclusion complex have shown that the encapsulated halide ion and the furan oxygen atoms lie at an interacting distance. Such an interaction perturbs the energy of the halide-to-copper(II) charge transfer transition, which is shifted to the visible region. As a consequence, an intense yellow colour develops on halide inclusion. Such a colour change is not observed on chloride or bromide inclusion into the dicopper(II) bistren cryptate containing spacers which are not capable to interact with the encapsulated halide and do not perturb the charge transfer transition, e.g. 1,3-xylyl fragments.     

Progress of Lead‐Free Halide Double Perovskites

The field of halide metal perovskite photovoltaics has caught widespread interest in the last decade. This is seen in the rapid rise of power conversion efficiency, which is currently over 23%. It has also stimulated a widespread application of halide metal perovskites in other fields, such as light‐emitting diodes, field‐effect transistors, detectors, and lasers. Despite the fascinating characteristics of the halide metal perovskites, the presence of toxic lead (Pb) in their chemical composition is regarded as one of the major limiting factors preventing their commercialization. Addressing the toxicity issues in these compounds by a careful and strategic replacement of Pb²⁺ with other nontoxic candidate elements represents a promising direction to fabricate lead‐free optoelectronic devices. Such attempts yield a halide double perovskite structure which allows flexibility for various compositional adjustments. Here, the authors present the current progress and setbacks in crystal structures, materials preparation, optoelectronic properties, stability, and photovoltaic applications of lead‐free halide double perovskite compounds. Prospective research directions to improve the optoelectronic properties of existing materials are given that may help in the discovery of new lead‐free halide double perovskites.