An efficient method for homologous gene reconstitution in Cryptococcus gattii using URA5 auxotrophic marker

Cryptococcus gattii (Cg) is an emerging pathogen of both healthy and immunocompromised patients worldwide. Understanding the molecular genetic basis of virulence and physiology of this pathogen will be critical for defining its pathogenic mechanisms. The purine biosynthetic gene, URA5 encoding orate phosphorybosyltransferase (OPRTase), has been successfully used as a selectable marker for gene disruption by transformation and homologous recombination in Cg. Here, we report the characterization of ura5 auxotrophy and URA5 reversion phenomenon at the molecular, genetic, and structural levels, and use of ura5→URA5 reversion as a tool for reconstitution of gene of interest and auxotrophic marker to their native loci. We identified a single mutation of GG₁₂₈T→GAT with substitution of glycine to aspartic acid at amino acid position 43 resulting in ura5 auxotrophy. The ura5→URA5 reversion on CSM lacking uracil (CSM-U) was found to be a rare phenomenon with a reversion frequency of 0.000002%, and sequence analysis of URA5 from all the reverted strains revealed mutation of GA₁₂₈T→GGT back to its ancestral state. The URA5 allele in the reverted strains was fully functional, as demonstrated by the excellent growth of these strains on medium lacking uracil, as well as by the ability of this allele to efficiently transform ura5 mutant to restore prototrophy. The deduced Cg URA5 protein modeled on the known crystal structures of OPRTase from Salmonella typhimurium (1LH0_A, 1STO) and from Escherichia coli (1ORO_A) indicated that the glycine 43 of Cg URA5 was situated on a conserved loop, and it’s substitution to more globose aspartic acid may have resulted in URA5 inactivation in auxotrophic strain. The advantages of this approach for the generation of a reconstituted strain are (1) that it restores the functionality of the native URA5, (2) that it eliminates an additional biolistic delivery of exogenous URA5, and (3) that it allows easy selection of reconstituted strains with homologous integration. This strategy was successfully used for the generation of Cg can2+CAN2/URA5 homologous reconstituted strains, which grew in ambient air to the wild-type level while can2 mutant exhibited severe growth defect under similar conditions. Srinivas D. Narasipura and Ping Ren contributed equally to this work.     

Identification of the Orotidine-5′-Phosphate Decarboxylase Gene and Development of a Transformation System in the Yeast Saccharomyces exiguus Yp74L-3

To investigate the uracil biosynthetic pathway of the yeast Saccharomyces exiguus Yp74L-3, uracil auxotrophic mutants were isolated. Using conventional genetic techniques, four mutant genes concerned in uracil biosynthesis were identified and denoted as ura1, ura2, ura3, and ura4. Mutations in the URA3 and URA4 genes were specifically selected with 5-fluoroorotic acid (5-FOA). Vector plasmids containing the URA3 gene and an autonomously replicating sequence (ARS) of S. cerevisiae produced sufficient amounts of Ura⁺ transformants from the ura4 mutant of S. exiguus. This fact indicates that the S. exiguus URA4 gene encodes orotidine-5′-phosphate decarboxylase (OMP decarboxylase) and demonstrates that vector plasmids for S. cerevisiae are also usable in S. exiguus.     

Targeted integrative transformation of Candida tropicalis by electroporation

Summary A method for integrative transformation of the diploid yeast Candida tropicalis by electroporation has been developed. By linearizing the transforming plasmid DNA containing the URA3 gene prior to electroporation of recipient cells, its integration was targeted to a specific locus in the genome, resulting in single or multiple tandem integrations. The optimal electroporation conditions for this yeast were established and include an electric pulse of 2.25 kV/cm for a duration of 50 ms. Using these conditions, Ura⁺ transformants were readily obtained at a high frequency (45 transformants/g DNA) as the result of targeted integration of the URA3 gene containing plasmid DNA at the chromosomal ura3 locus. The number of transformants resulting from this procedure is comparable to that achieved with a recently reported spheroplast transformation procedure for C. tropicalis; in addition, it offers the advantages of being simple, rapid and reproducible.     

Development of an integrative DNA transformation system for the yeast Hansenula anomala

A host-vector system for the yeast Hansenula anomala was developed. The system was based on an auxotrophic mutant host of H. anomala which was defective in orotidine-5′-phosphate decarboxylase (ODCase) activity. The H. anomala ODCase-negative mutant strains (ura3 strains) were isolated based on 5-fluoroorotic acid (5-FOA) resistance. A plasmid vector containing the H. anomala URA3 gene was used for transformation. Using this plasmid, all of the H. anomala ura3 strains tested could be transformed to Ura⁺ phenotypes. In all of Ura⁺ transformants, the introduced plasmid was integrated into the chromosomal URA3 locus by homologous recombination. The Ura⁺ phenotype of the transformants was stably maintained after nonselective growth.     

5-fluoro-orotic acid induces chromosome alterations in genetically manipulated strains of Candida albicans

We previously reported the occurrence of chromosome alterations in a Candida albicans prototrophic strain 3153A treated with 5-fluoro-orotic acid (5-FOA). In this study we investigated the mutagenic properties of 5-FOA with two derivatives of C. albicans strain CAF4-2 (ura3/ura3), each containing an ectopic copy of URA3 gene (ura3/ ura3 URA3) on a different chromosome. As expected, after the ura3/ura3 URA3 constructs were applied to 5-FOA containing solid medium, the "pop-outs" that lost URA3 appeared. However most of the "pop-outs" acquired various chromosome alterations. Thus constructs exposed to 5-FOA should be examined for chromosome alterations or the use of 5-FOA should be avoided.     

Identification of a Ty insertion within the coding sequence of the S. cerevisiae URA3 gene

Summary Insertion mutations in yeast caused by the transposable element Ty have been identified at several genetic loci. In all cases so far, the site of Ty insertion has been in the 5 non-coding region of the affected gene. Experiments presented here demonstrate that the ura3-52 mutation, a non-reverting ura3 mutation, is caused by a Ty insertion mutation within the coding region of the URA3 gene. This Ty insertion within a gene has a similar structure to those in non-coding regions.     

Isolation of Hem3 mutants from Candida albicans by sequential gene disruption

Summary Molecular methods for directed mutagenesis in Candida albicans have relied on a combination of gene disruption by transformation to inactivate one allele and UV-induced mitotic recombination or point mutation to produce lesions in the second allele. An alternate method which uses two sequential gene disruptions was developed and used to construct a C. albicans mutant defective in a gene essential for synthesizing tetrapyrrole (uroporphyrinogen I synthase). The Candida gene was cloned from a random library by complementation of the hem3 mutation in Saccharomyces cerevisiae. The complementing region was limited to a 2.0 kb fragment by subcloning and a BglII site was determined to be within an essential region. Linear fragments containing either the Candida URA3 or LEU2 gene inserted into the BglII site were used to disrupt both alleles of a leu2, ura3 mutant by sequential transformation. Ura⁺, Leu⁺ heme-requiring strains were recovered and identified as hem3 mutants by Southern hybridization, transformation to heme independence by the cloned gene, and enzyme assays.     

Construction of Uracil and Tryptophan Auxotrophic Mutants from Sake Yeasts by Disruption of URA3 and TRP1 Genes

Uracil auxotrophic mutants were constructed from the sake yeasts K-701 and K-901 by successive URA3 gene disruption. First, as sake yeast is diploid, one URA3 gene was disrupted with pURA38 (AURA3 SMR1) and the heterozygous disruptant was isolated on an SM (sulfometuron methyl) plate. The other URA3 gene was disrupted with pURA36 (Δ URA3) and homozygous URA3 disruptants were isolated on FOA (5-fluoro-orotic acid) plate on which only ura3 mutants can grow. Direct URA3 gene disruption with pURA36 (Δ URA3) was also done and the uracil auxotrophic mutant was isolated. Four types of URA3 disruptants were isolated, two of which had no bacterial DNA.

A tryptophan auxotrophic mutant was constructed from one of the URA3 disruptant using pTRP14 (Δ TRP1 URA3) by gene disruption. This TRP1 disruptant was also lacking bacterial DNA.

Laboratory scale sake brewing using the auxotrophic mutants showed that these strains are very useful as recipient strains for molecular breeding of sake yeasts.     

Establishment of a selection marker recycling system for sequential transformation of the plant-pathogenic fungus Colletotrichum orbiculare

Genome sequencing of pathogenic fungi has revealed the presence of various effectors that aid pathogen invasion by the manipulation of plant immunity. Effectors are often individually dispensable because of duplication and functional redundancy as a result of the arms race between host plants and pathogens. To study effectors that have functional redundancy, multiple gene disruption is often required. However, the number of selection markers that can be used for gene targeting is limited. Here, we established a marker recycling system that allows the use of the same selection marker in successive transformations in the model fungal pathogen Colletotrichum orbiculare, a causal agent of anthracnose disease in plants belonging to the Cucurbitaceae. We identified two C. orbiculare homologues of yeast URA3/pyrG, designated as URA3A and URA3B, which can be used as selection markers on medium with no uridine. The gene can then be removed from the genome via homologous recombination when the fungus is grown in the presence of 5-fluoroorotic acid (5-FOA), a chemical that is converted into a toxin by URA3 activity. The ura3a/b double mutants showed auxotrophy for uridine and insensitivity to 5-FOA. Using the ura3a/b mutants, transformation with the URA3B marker and its removal were successfully applied to disrupt the virulence-related gene, PKS1. The pks1 mutants showed a reduction in virulence, demonstrating that the method can be used to study virulence-related genes in C. orbiculare. The establishment of a URA3-based marker recycling system in plant-pathogenic fungi enables the genetic analysis of multiple genes that have redundant functions, including effector genes.     

Stable yeast transformation with chimeric plasmids using a 2 micron-circular DNA-less strain as a recipient.

Summary By using two chimeric plasmids containing yeast URA3 gene as a selection marker and 2 m yeast DNA linked to the bacterial plasmid pCR1, a yeast strain devoid of any 2 m DNA sequence was transformed. Recovery in E. coli of plasmids from yeast transformants showed that the 2 m-less strain was able to maintain the chimeric plasmids as autonomous replicons, with very infrequent plasmid recombination. Hybridization experiments gave no evidence for integration of the URA3 DNA sequence in the chromosomal DNA. The transformed clones showed a high stability of the ura⁺ character during vegetative multiplication, even in the absence of selective pressure. The specific activity of orotidine 5 monophosphate decarboxylase (coded by the URA3 gene) was 5 to 10 fold higher than in the wild type.These features should offer new possibilities for cloning with yeast.