Selectivity in aromatic substitution: Effects of micellar 6-hydroxystearate on the chlorination of phenol

High selectivity has been observed in the chlorination of phenol in aqueous and methanolic sodium dodecyl sulfate by a t-alkyl hypochlorite located remote from the detergent anionic head group. The location of the substituent electrophile suggests that the reaction should lead mainly to para chlorination. In fact, ortho chlorination predominates. The results obtained are attributed to the bifunctional nature of the detergent molecule and are discussed in relation to the structure of micelles.     

The Mechanism of Detergent Solubilization of Lipid Bilayers

Multiple data are available on the self-assembly of mixtures of bilayer-forming amphiphiles, particularly phospholipids and micelle-forming amphiphiles, commonly denoted detergents. The structure of such mixed assemblies has been thoroughly investigated, described in phase diagrams, and theoretically rationalized in terms of the balance between the large spontaneous curvature of the curvophilic detergent and the curvophobic phospholipids. In this critical review, we discuss the mechanism of this process and try to explain the actual mechanism involved in solubilization. Interestingly, membrane solubilization by some detergents is relatively slow and the common attribute of these detergents is that their trans-bilayer movement, commonly denoted flip-flop, is very slow. Only detergents that can flip into the inner monolayer cause relatively rapid solubilization of detergent-saturated bilayers. This occurs via the following sequence of events: 1), relatively rapid penetration of detergent monomers into the outer monolayer; 2), trans-membrane equilibration of detergent monomers between the two monolayers; 3), saturation of the bilayer by detergents and consequent permeabilization of the membrane; and 4), transition of the whole bilayer to thread-like mixed micelles. When the detergent cannot flip to the inner monolayer, the outer monolayer becomes unstable due to mass imbalance between the monolayers and inclusion of the curvophilic detergent molecules in a flat surface. Consequently, the outer monolayer forms mixed micellar structures within the outer monolayer. Shedding of these micelles into the aqueous solution results in partial solubilization. The consequent leakage of detergent into the liposome results in trans-membrane equilibration of detergent and subsequent micellization through the rapid bilayer-saturation mechanism.     

Oligomeric behavior of the RND transporters CusA and AcrB in micellar solution of detergent

We have used analytical ultracentrifugation to explore the oligomeric states of AcrB and CusA in micellar solution of detergent. These two proteins belong to the resistance, nodulation and cell division (RND) family of efflux proteins that are involved in multiple drug and heavy metal resistance. Only the structure of AcrB has been determined so far. Although functional RND proteins should assemble as trimers as AcrB does, both AcrB and CusA form a mixture of quaternary structures (from monomer to heavy oligomer) in detergent solution. The distribution of the oligomeric states was studied as a function of different parameters: nature and concentration of the detergent, ionic strength, pH, protein concentration. This pseudo-heterogeneity does not hamper the crystallization of AcrB as a homotrimer.     

α-Chymotrypsin superactivity in aqueous solutions of cationic surfactants

α-Chymotrypsin (α-CT) activity was tested in aqueous media with the following cetyltrialkylammonium bromide surfactants in the series methyl, ethyl, propyl and butyl, different in the head group size, and for the sake of comparison also with the anionic sodium n-dodecyl sulfate and the zwitterionic myristyldimethylammonium propanesulfonate. N-glutaryl-l-phenylalanine p-nitroanilide hydrolysis rate was monitored at surfactant concentration above the critical micellar one. Only some cationic surfactants gave superactivity and the head group size had a major weight. The highest superactivity was measured in the presence of cetyltributylammonium bromide. The effect of both nature and concentration of three different buffers was also investigated. There is a dependence of enzyme superactivity on buffer type. Michaelis–Menten kinetics were found. The binding constants of substrate with micellar aggregates were determined in the used buffers and the effective improvement of reaction rate (at the same free substrate concentration in the medium) was calculated. k_cat significantly increased while K_m was little changed after correction to free substrate concentration. The ratio of k_cat to K_m was between 12 and 35 times higher than in pure buffer, depending on buffer and surfactant concentrations. The increase of α-CT activity (30%) was less important in the presence of 1×10⁻² M tetrabutylammonium bromide, a very hydrophobic salt, unable to micellise. Fluorescence spectra showed differences of enzyme conformation in the presence of various surfactants.     

Lutein-chlorophyll-a energy transfer in detergent micelles

Absorption, fluorescence and fluorescence excitation spectra were determined for equimolar mixed micellar detergent solutions of lutein and chlorophyll-a in the concentration range from 9·10^?6 to 1.8·10^?4 M, with detergent (triton-X100) concentrations from 3·-10^?4 to 7·10^?3 M. In the range of detergent concentrations studied the pigments incorporated into the detergent micelles attained a high local concentration (0.1 to 0.01 M), reminiscent of pigment concentration within the chloroplast. A lutein → chlorophyll-a energy transfer with an efficiency of about 15% was found in these systems. In dilute (9·10^?6 M) pigment solution with concentrated (7·10^?3 M) detergent practically no transfer is observed. The extent of aggregation and the efficiency of transfer depend on the composition of the system. The aggregation of chlorophyll-a is partly inhibited by lutein molecules. It is shown that the energy transfer efficiency as function of distance follows anr ^?3 relationship,R ₀ being 22 å.     

Micelle formation in the presence of photosystem I

The correlation between membrane protein solubilisation and detergent aggregation in aqueous solution is studied for a series of n-alkyl-β-d-maltosides (C_xG₂ with x = 10, 11, 12 being the number of carbon atoms in the alkyl chain) using the trimeric photosystem I core complex (PSIcc) of oxygenic photosynthesis from Thermosynechococcus elongatus as model protein. While protein solubilisation is monitored via the turbidity of the solution, the aggregation behavior of the detergent is probed via the fluorescence spectrum of the polycyclic aromatic hydrocarbon pyrene. In addition, changes of the fluorescence spectrum of PSIcc in response to formation of the detergent belt surrounding its hydrophobic surface are investigated. Solubilisation of PSIcc and aggregation of detergent into micelles or belts are found to be strictly correlated. Both processes are complete at the critical solubilisation concentration (CSC) of the detergent, at which the belts are formed. The CSC depends on the concentration of the membrane protein, [prot], and is related to the critical micelle concentration (CMC) by the empirical law ln(CSC/CMC) = n¯₀ [prot], where the constant n¯₀ = (2.0 ± 0.3) μM⁻¹ is independent of the alkyl chain length x. Formation of protein-free micelles below the CSC is not observed even for x = 10, where a significant excess of detergent is present at the CSC. This finding indicates an influence of PSIcc on micelle formation that is independent of the binding of detergent to the hydrophobic protein surface. The role of the CSC in the optimisation of membrane protein crystallisation is discussed.     

The synthesis of a photolabile detergent and its use in the isolation and characterization of protein

A new ionic detergent sodium 4-(3,3-dimethyl-1-oxotridecyl)benzenesulfonate similar to sodium dodecyl sulfate has been synthesized which is photodegradable to sodium p-acetyl-benzenesulfonate and a simple olefin mixture upon irradiation in aqueous solution with light 300 nm and above in wavelength. This photodegradable detergent can be used to solubilize many proteins and provide information as to the molecular weight and subunit composition of proteins by electrophoresis. The removal of this detergent by photolysis results in no apparent damage to protein.     

Dodecyl Maltoside Protects Membrane Proteins In Vacuo

Molecular dynamics simulations have been used to characterize the effects of transfer from aqueous solution to a vacuum to inform our understanding of mass spectrometry of membrane-protein-detergent complexes. We compared two membrane protein architectures (an α-helical bundle versus a β-barrel) and two different detergent types (phosphocholines versus an alkyl sugar) with respect to protein stability and detergent packing. The β-barrel membrane protein remained stable as a protein-detergent complex in vacuum. Zwitterionic detergents formed conformationally destabilizing interactions with an α-helical membrane protein after detergent micelle inversion driven by dehydration in vacuum. In contrast, a nonionic alkyl sugar detergent resisted micelle inversion, maintaining the solution-phase conformation of the protein. This helps to explain the relative stability of membrane proteins in the presence of alkyl sugar detergents such as dodecyl maltoside.     

Determination of Benzalkonium Chloride Partition in Micelle Solutions Using Ultrafiltration Method

The objectives of this study were to determine the concentrations of free benzalkonium chloride (BAC) and apparent partitions coefficients (K _m) in micelle solutions and to explore its application in formulation development. Ultrafiltration (UF) was carried out using 10K Nanosep® devices and centrifugation at 5,000 rpm for 5 min. The separation of free BAC from micellar solutions was also conducted using ultracentrifugation (UC) method for the comparison with UF method. Capillary electrophoresis method was used for the identification of micelles. Results showed that a UF method was applicable for quantitatively evaluating BAC–micelle interaction in micellar solutions. Unlike UF, UC could not completely separate free BAC from the micelles. The free BAC concentrations in the micelle solutions decreased with increasing surfactant concentrations. Among polysorbate 80, cremophor EL, and tyloxapol, BAC had the highest K _m in polysorbate 80 solutions. The K _m was significantly lower in non-buffered aqueous solutions than that in citric buffers. Moreover, increasing surfactant concentrations led to reducing antimicrobial activity. The UF is a rapid and accurate method that minimally alters the micellar equilibrium for the determination of free BAC and K _m in micellar solutions. In conclusion, free BAC concentration, which is a function of surfactant type, surfactant concentration, and ion strength of solution, is likely associated with the antimicrobial activity.     

Preparation and Characterization of Individual and Multi-drug Loaded Physically Entrapped Polymeric Micelles

Amphiphilic block copolymers like polyethyleneglycol-block-polylactic acid (PEG-b-PLA) can self-assemble into micelles above their critical micellar concentration forming hydrophobic cores surrounded by hydrophilic shells in aqueous environments. The core of these micelles can be utilized to load hydrophobic, poorly water soluble drugs like docetaxel (DTX) and everolimus (EVR). Systematic characterization of the micelle structure and drug loading capabilities are important before in vitro and in vivo studies can be conducted. The goal of the protocol described herein is to provide the necessary characterization steps to achieve standardized micellar products. DTX and EVR have intrinsic solubilities of 1.9 and 9.6 µg/ml respectively Preparation of these micelles can be achieved through solvent casting which increases the aqueous solubility of DTX and EVR to 1.86 and 1.85 mg/ml, respectively. Drug stability in micelles evaluated at room temperature over 48 hr indicates that 97% or more of the drugs are retained in solution. Micelle size was assessed using dynamic light scattering and indicated that the size of these micelles was below 50 nm and depended on the molecular weight of the polymer. Drug release from the micelles was assessed using dialysis under sink conditions at pH 7.4 at 37 ^oC over 48 hr. Curve fitting results indicate that drug release is driven by a first order process indicating that it is diffusion driven.     

pH dependent inactivation of solubilized F1F0 ATP synthase by dicyclohexylcarbodiimide: pKa of detergent unmasked aspartyl-61 in Escherichia coli subunit c

The pH dependence of the reaction of dicyclohexylcarbodiimide with the essential aspartyl-61 residue in subunit c of Escherichia coli ATP synthase was compared in membranes and in a detergent dispersed preparation of the enzyme. The rate of reaction was estimated by measuring the inactivation of ATPase activity. The reaction with the detergent dispersed form of the enzyme proved to be pH sensitive with the essential aspartyl group titrating with a pK_a=8. However, when measured with E. coli membranes, the reaction proved to be pH insensitive. The results suggest that the reacting aspartyl-61 residues are shielded from the bulk aqueous solvent when in the membrane, but then become aqueous-accessible following detergent solubilization.     

A negative staining study of natural and synthetic L-α-lysophosphatidylcholine micelles,macromolecular aggregates and crystals

A comparative assessment has been made by transmission electron microscopy of negatively stained specimens, of the micellar, aggregated and crystalline states of palmitoyl, oleoyl and ex ovo L-α-lysophosphatidylcholine present in aqueous suspensions. Micelle formation from dry lysophosphatidylcholines is shown to be temperature dependent. The presence of the unsaturated fatty acid in oleoyl L-α-lysophosphatidylcholine and some degree of unsaturation in L-α-lysophosphatidylcholine (ex ovo) promotes micelle formation at low temperatures (4 and 22°C), whereas crystalline palmitoyl L-α-lysophosphatidylcholine is essentially insoluble at low temperatures and requires incubation at 60°C to produce a micellar suspension.It is suggested that the micellar conformation is not spherical, a cylindrical or discoid shape is more compatible with the images presented. Both palmitoyl and ex ovo L-α-lysophosphatidylcholine produce flexibel rod-like micellar aggregates ca 6 nm in diameter and larger (20–60 nm dia) stacked-disc aggregates, again with a temperature dependency. The thickness of the disc-like L-α-lysophosphatidylcholine of a phospholipid bilayer (ca 6–7 nm). This, together with the ability of palmitoyl L-α-lysophosphatidylcholine to crystallize as multi-lamellar hexagonal particles which remain stable in aqueous suspensions at 4°C, suggests that, as with other phospholipids, the L-α-lysophosphatidylcholines possess the property of forming lamellar structures, but that these become increasingly unstable at higher temperatures depending on the fatty acid unsaturation. Ammonium molybdate and sodium phosphotungstate have been found to be more satisfactory than uranyl acetate for negative staining of aqueous suspensions of L-α-lysophosphatidylcholines.     

Two-Dimensional Crystalline Array Formation of Glucuronide Transporter from Escherichia coli by the Use of Polystyrene Beads for Detergent Removal

n-Dodecyl-β-d-maltoside solubilized glucuronide transporter (GusB), the product of gusB gene from Escherichia coli, was treated with Bio-Beads as an agent for removing the detergent from a micellar solution under suitable combination with dimyristoylphosphatidylcholine. Optimizing conditions led to a two-dimensional crystalline array formation of GusB. The crystalline arrays appear to have a hexagonal lattice with layer group P6, the unit cell dimensions of a = b = 13.8 nm and γ = 120°. Each stain-protruding periodic unit showed approximately 11.8 ± 0.3 nm in a diameter in the inverse Fourier-filtered image to have formed with pentameric GusB (5 × 49.7 kDa).     

Dodecyl Maltoside Protects Membrane Proteins In Vacuo

Molecular dynamics simulations have been used to characterize the effects of transfer from aqueous solution to a vacuum to inform our understanding of mass spectrometry of membrane-protein-detergent complexes. We compared two membrane protein architectures (an α-helical bundle versus a β-barrel) and two different detergent types (phosphocholines versus an alkyl sugar) with respect to protein stability and detergent packing. The β-barrel membrane protein remained stable as a protein-detergent complex in vacuum. Zwitterionic detergents formed conformationally destabilizing interactions with an α-helical membrane protein after detergent micelle inversion driven by dehydration in vacuum. In contrast, a nonionic alkyl sugar detergent resisted micelle inversion, maintaining the solution-phase conformation of the protein. This helps to explain the relative stability of membrane proteins in the presence of alkyl sugar detergents such as dodecyl maltoside.     

Energy transfer by chlorophyll a in detergent micelles

The process of energy transfer was studied in the chlorophyll a-containing detergent micelle, serving as a possible model of the photosynthetic unit. Chlorophyll a was added to aqueous solutions of the detergent Triton X-100 and incorporated into the micelles. The energy transfer process was studied by investigating the concentration depolarization of fluorescence of chlorophyll a. On the basis of the experimental depolarization curves as well as the value of the Förster parameter $\text{R}{}_0\text{= 56}\text{A}\text{?}$ calculated from the overlap of absorption and fluorescence spectra it was concluded that energy transfer between chlorophyll a molecules in this model follows the Förstertype mechanism of inductive resonance. Furthermore it was found that the local concentration of chlorophyll a in the micelles is higher by 1–3 orders of magnitude than its overall concentration in the solution and by choosing the appropriate ratio between the concentration of chlorophyll a and the detergent it is possible to reach the in vivo chlorophyll concentration of 0.1 M within the micelles. Thus the chlorophyll-detergent micelle model may be applied as a model of the separate package-type photosynthetic unit.     

Continuous fluorometric assay of phospholipase A2 with pyrene-labeled lecithin as a substrate

1,2-Bis[4-(1-pyreno)butanoyl]-sn-glycero-3-phosphorylcholine was synthesized as a fluorogenic substrate for phospholipase A₂. It has a critical micellar concentration of 7.3 μm and gives only excimer fluorescent emission at 480 nm in aqueous micellar dispersion. When hydrolyzed by phospholipase A₂, the products give only monomer emission which is monitored best at 382 and 400 nm. Conditions were developed for an assay for phospholipase A₂ using this substrate. The assay was sensitive to as little as 8 ng of pure porcine pancreatic phospholipase A₂.     

Amphiphilic,hydrophilic, or hydrophobic synthetic bacteriochlorins in biohybrid light-harvesting architectures: consideration of molecular designs

Biohybrid light-harvesting architectures can be constructed that employ native-like bacterial photosynthetic antenna peptides as a scaffold to which synthetic chromophores are attached to augment overall spectral coverage. Synthetic bacteriochlorins are attractive to enhance capture of solar radiation in the photon-rich near-infrared spectral region. The effect of the polarity of the bacteriochlorin substituents on the antenna self-assembly process was explored by the preparation of a bacteriochlorin–peptide conjugate using a synthetic amphiphilic bacteriochlorin (B1) to complement prior studies using hydrophilic (B2, four carboxylic acids) or hydrophobic (B3) bacteriochlorins. The amphiphilic bioconjugatable bacteriochlorin B1 with a polar ammonium-terminated tail was synthesized by sequential Pd-mediated reactions of a 3,13-dibromo-5-methoxybacteriochlorin. Each bacteriochlorin bears a maleimido-terminated tether for attachment to a cysteine-containing analog of the Rhodobacter sphaeroides antenna β-peptide to give conjugates β-B1, β-B2, and β-B3. Given the hydrophobic nature of the β-peptide, the polarity of B1 and B2 facilitated purification of the respective conjugate compared to the hydrophobic B3. Bacteriochlorophyll a (BChl a) associates with each conjugate in aqueous micellar media to form a dyad containing two β-peptides, two covalently attached synthetic bacteriochlorins, and a datively bonded BChl-a pair, albeit to a limited extent for β-B2. The reversible assembly/disassembly of dyad (β-B2/BChl)₂ was examined in aqueous detergent (octyl glucoside) solution by temperature variation (15–35 °C). The energy-transfer efficiency from the synthetic bacteriochlorin to the BChl-a dimer was found to be 0.85 for (β-B1/BChl)₂, 0.40 for (β-B2/BChl)₂, and 0.85 for (β-B3/BChl)₂. Thus, in terms of handling, assembly and energy-transfer efficiency taken together, the amphiphilic design examined herein is more attractive than the prior hydrophilic or hydrophobic designs.     

Enhanced stability of Kluyveromyces lactis β galactosidase immobilized on glutaraldehyde modified multiwalled carbon nanotubes

The present study demonstrates covalent immobilization of Kluyveromyces lactis β galactosidase on functionalized multi-walled carbon nanotubes (MWCNTs). Highly efficient surface modification of MWCNTs was achieved by glutaraldehyde for binding greater amount of enzyme. X-ray diffraction analysis and UV visible spectroscopy of MWCNTs showed them to be entirely dispersive in aqueous solution. Transmission electron microscopy showed that MWCNTs were of 20 nm size. Thermogravimetric analysis further revealed the stability of glutaraldehyde modified MWCNT as an ideal matrix for enzyme immobilization. The optimal pH for soluble and immobilized β galactosidase was observed at pH 7.0 while the optimal operating temperatures were observed at 40 °C and 50 °C, respectively. Moreover, our findings demonstrated that β galactosidase immobilized on surface functionalized MWCNTs retained greater biocatalytic activity at higher galactose concentration, and upon repeated uses as compared to enzyme in solution.     

Influence of Igepal reverse micellar and micellar systems on activity and stability of heme peroxidases

The activities of horseradish peroxidase (HRP) and lactoperoxidase (LPO) entrapped in reverse micelles of Igepal CO-520 in cyclohexane were studied. When the molar ratio of water to surfactant, w₀ was ≥13, the activity of HRP encapsulated in the water pool of the reverse micelle was comparable with that measured in buffer. For LPO, however, lower activity was observed after its incorporation into the same system.

The activity of the investigated peroxidases was also measured in an aqueous solution of Igepal CO-720 or after incubation with this surfactant. The enzymes became inactivated in an aqueous micellar solution of Igepal CO-720, although this process was reversible.

The stability of HRP and LPO at 37 or 50°C was lower in the micellar systems than in buffer with the exception for HRP in reverse micelles at 50°C.     

Superficially active water in lipid membranes and its influence on the interaction of an aqueous soluble protease

The purpose of this paper is to demonstrate that the interaction of an aqueous soluble enzyme with lipid membranes is influenced by the lipid composition of the interphase. The results show that the interaction of an aqueous soluble protease, Rennet from Mucor miehei, depends on the exposure of the carbonyl and phosphate groups at the membrane interphase. The changes produced by the protease on the surface pressure of monolayers of dimyristoylphosphatidylcholine (DMPC); dioleoylphosphatidylcholine (DOPC); diphytanoylphosphatidylcholine (DPhPC); dipalmitoylphosphatidylcholine (DPPC); di-O-tetradecylphosphatidyl-choline [D(ether)PC]; dimyristoylphosphatidylethanolamine (DMPE); di-O-tetradecyl-phosphatidylethanolamine [D(ether)PE] were measured at different initial surface pressures. The meaning of the ΔΠ vs. Π curves was interpreted in the light of the concept of interphase given by Defay and Prigogine [R. Defay, I. Prigogine, Surface Tension and Adsorption, John Wiley & Sons, New York, 1966, pp. 273-277] considering the interphase as a bidimensional solution of polar head groups. With this approach, and based on reported evidences that carbonyls and phosphates are the main hydration sites of the lipid membranes, it is suggested that the mechanism of interaction of aqueous soluble protein involves water beyond the hydration shell. At high surface pressure, only water strongly bound to carbonyl and phosphate groups is present and the interaction is not occurring. In contrast, at low surface pressures, the protease-membrane interaction is a function of acyl chain for different polar groups. This is interpreted, as a consequence of the changes in the interfacial tension produced by the displacement of water confined between the hydrated head groups.