Structure-activity relationship in the enzymatic hydrolysis of dipeptide aryl amides by dipeptidyl peptidase IV

Quantitative structure activity analysis of the substrate types Ala-Ala-AR and Ala-Pro-AR containing different substituents in the aryl ring showed that the rate-limiting step in the hydrolysis of the alanine substrates by dipeptidyl peptidase IV occurs in th acylation reaction (kcat approximately k2). Probably, the tetrahedral intermediate of the acylation process has a real life time. The positive q-value of the Hammett-equation in k'cat suggests that the N-atom of the arylamide is charged more negatively in the transition state TI not equal to than in the original state TI. The analysis of the quantitative conformation activity relationship (QCAR) gives information on the steric situation in the tetrahedral intermediate of the acylation step near the transition state. The rate limiting step in the hydrolysis of the substrates of the proline type occurs in the deacylation reaction.     

Transition-state structures for enzymatic and alkaline phosphotriester hydrolysis.

The primary and secondary 18O isotope effects for the alkaline (KOH) and enzymatic (phosphotriesterase) hydrolysis of two phosphotriesters, O,O-diethyl p-nitrophenyl phosphate (I) and O,O-diethyl O-(4-carbamoylphenyl) phosphate (II), are consistent with an associative mechanism with significant changes in bond order to both the phosphoryl and phenolic leaving group oxygens in the transition state. The synthesis of [15N, phosphoryl-18O]-, [15N, phenolic-18O]-, and [15N]-O,O-diethyl p-nitrophenyl phosphate and O,O-diethyl O-(4-carbamoylphenyl)phosphate is described. The primary and secondary 18O isotope effects for the alkaline hydrolysis of compound I are 1.0060 and 1.0063 +/- 0.0001, whereas for compound II they are 1.027 +/- 0.002 and 1.025 +/- 0.002, respectively. These isotope effects are consistent with the rate-limiting addition of hydroxide and provide evidence for a SN2-like transition state with the absence of a stable phosphorane intermediate. For the enzymatic hydrolysis of compound I, the primary and secondary 18O isotope effects are very small, 1.0020 and 1.0021 +/- 0.0004, respectively, and indicate that the chemical step in the enzymatic mechanism is not rate-limiting. The 18O isotope effects for the enzymatic hydrolysis of compound II are 1.036 +/- 0.001 and 1.0181 +/- 0.0007, respectively, and are comparable in magnitude to the isotope effects for alkaline hydrolysis, suggesting that the chemical step is rate-limiting. The relative magnitude of the primary 18O isotope effects for the alkaline and enzymatic hydrolysis of compound II reflect a transition state that is more progressed for the enzymatic reaction.     

Permeable membrane/mass spectrometric measurement of solvent 1H/2H, 12C/13C, and 16O/18O kinetic isotope effects associated with alpha-chymotrypsin deacylation: evidence for reaction mechanism plasticity

We have measured, by permeable membrane/mass spectrometry, the 16O/18O, 12C/13C, and solvent H2O/D2O kinetic isotope effects (kie) associated with acyl-alpha-chymotrypsin hydrolysis and transesterification. The hydrolysis of alpha-chymotrypsinyl 2-furoate has a 12C/13C kie of approximately 1.06. Transesterification of the same acyl enzyme shows 16O/18O, 12C/13C, and solvent H2O/D2O kinetic isotope effects of 1.015 (0.003), 1.01-1.02, and 2.226 (0.007), respectively. From the temperature independence of the 16O/18O transesterification kinetic isotope effect and kinetic data reported elsewhere [Wang, C.-L. A., Calvo, K. C., & Klapper, M. H. (1981) Biochemistry 20, 1401-1408], we conclude that there are two active forms of acylchymotrypsin. We also propose that formation of the tetrahedral intermediate is the rate-limiting step in both hydrolysis and transesterification and that the position of the transition state in the transesterification is closer to the starting enzyme ester while that for the hydrolytic reaction is closer to the tetrahedral intermediate. These results are discussed in terms of reaction mechanism plasticity.     

Do enzymes change the nature of transition states? Mapping the transition state for general acid-base catalysis of a serine protease

The properties of the transition state for serine protease-catalyzed hydrolysis of an amide bond were determined for a series of subtilisin variants from Bacillus lentus. There is no significant change in the structure of the enzyme upon introduction of charged mutations S156E/S166D, suggesting that changes in catalytic activity reflect global properties of the enzyme. The effect of charged mutations on the pK(a) of the active site histidine-64 N(epsilon)(2)-H was correlated with changes in the second-order rate constant k(cat)/K(m) for hydrolysis of tetrapeptide anilides at low ionic strength with a Br?nsted slope alpha = 1.1. The solvent isotope effect (D)2(O)(k(cat)/K(m))(1) = 1.4 +/- 0.2. These results are consistent with a rate-limiting breakdown of the tetrahedral intermediate in the acylation step with hydrogen bond stabilization of the departing amine leaving group. There is an increase in the ratio of hydrolysis of succinyl-Ala-Ala-Pro-Phe-anilides for p-nitroaniline versus aniline leaving groups with variants with more basic active site histidines that can be described by the interaction coefficient p(xy) = delta beta(lg)/delta pK(a) (H64) = 0.15. This is attributed to increased hydrogen bonding of the active site imidazolium N-H to the more basic amine leaving group as well as electrostatic destabilization of the transition state. A qualitative characterization of the transition state is presented in terms of a reaction coordinate diagram that is defined by the structure-reactivity parameters.     

Mechanistic origins of the substrate selectivity of serine proteases

Serine proteases catalyze the hydrolysis of amide bonds of their protein and peptide substrates through a mechanism involving the intermediacy of an acyl-enzyme. While the rate constant for formation of this intermediate, k(2), shows a dramatic dependence on peptide chain length, the rate constant for the intermediate's hydrolysis is relatively insensitive to chain length. To probe the mechanistic origins of this phenomenon, we determined temperature dependencies and solvent isotope effects for the alpha-chymotrypsin-catalyzed hydrolysis of Suc-Phe-pNA (K(s) = 1 mM, k(2) = 0.04 s(-)(1), and k(3) = 11 s(-)(1)), Suc-Ala-Phe-pNA (K(s) = 4 mM, k(2) = 0.9 s(-)(1), and k(3) = 42 s(-)(1)), and Suc-Ala-Ala-Pro-Phe-pNA (K(s) = 0.1 mM, k(2) = 98 s(-)(1), and k(3) = 71 s(-)(1)). We found that while the van't Hoff plots for K(s) and the Eyring plots for k(3) are linear for all three reactions, the Eyring plots for k(2) are convex, indicating that the process governed by k(2) is complex, possibly involving a coupling between active site chemistry and protein conformational isomerization. This interpretation is strengthened by solvent isotope effects on k(2) that are largely temperature-independent. Furthermore, the dependence of k(2) on peptide length is manifested entirely in the enthalpy of activation, suggesting a mechanism of catalysis by distortion. Taken together, this analysis of acylation suggests that extended substrates which can engage in subsite interactions are able to efficiently trigger the coupling mechanism between chemistry and a conformational isomerization that distorts the substrate and thereby promotes nucleophilic attack.     

Detection of a tetrahedral intermediate in the trypsin-catalysed hydrolysis of specific ring-activated anilides

The substituent dependence for kcat/Km of trypsin anilide hydrolysis is consistent with a rate-limiting general acid-base catalysed breakdown of a tetrahedral intermediate. The formation and disappearance of this intermediate during the hydrolysis of alpha-N-acetyl-L-lysin p-nitroanilide is observed in stopped-flow experiments.     

pH-dependence and structure–activity relationships in the papain-catalysed hydrolysis of anilides

The pH-dependence of the Michaelis-Menten parameters for the papain-catalysed hydrolysis of N-acetyl-l-phenylalanylglycine p-nitroanilide was determined. The equilibrium binding constant, K(s), is independent of pH between 3.7 and 9.3, whereas the acylation constant, k(+2), shows bell-shaped pH-dependence with apparent pK(a) values of 4.2 and 8.2. The effect of substituents in the leaving group on the acylation constant of the papain-catalysed hydrolysis of hippuryl anilides and N-acetyl-l-phenylalanylglycine anilides gives rise in both series to a Hammett rho value of -1.04. This indicates that the enzyme provides electrophilic, probably general-acid, catalysis, as well as the nucleophilic or general-base catalysis previously found. A mechanism involving a tetrahedral intermediate whose formation is general-base-catalysed and whose breakdown is general-acid-catalysed seems most likely. The similarity of the Hammett rho values appears to exclude facilitated proton transfer as a means through which the specificity of papain is expressed.     

15N isotope effects in glutamine hydrolysis catalyzed by carbamyl phosphate synthetase: evidence for a tetrahedral intermediate in the mechanism

15N isotope effects have been measured on the hydrolysis of glutamine catalyzed by carbamyl phosphate synthetase of Escherichia coli. The isotope effect in the amide nitrogen of glutamine is 1. 0217 at 37 degrees C with the wild-type enzyme in the presence of MgATP and HCO(3)(-) (overall reaction taking place). This V/K isotope effect indicates that breakdown of the tetrahedral intermediate formed with Cys 269 to release ammonia is the rate-limiting step in the hydrolysis. A full isotope effect of 1. 0215 is also seen in the partial reaction catalyzed by an E841K mutant enzyme, whose rate of glutamine hydrolysis is not affected by MgATP and HCO(3)(-). With wild-type enzyme in the absence of MgATP and HCO(3)(-), however, the (15)N isotope effect is reduced to 1. 0157. These isotope effects are interpreted in terms of partitioning of the tetrahedral intermediate whose rate of formation is dependent upon a conformation change which closes the active site after glutamine binding and prepares the enzyme for catalysis. An Ordered Uni Bi mechanism for glutamine hydrolysis that is consistent with the isotope effects and with the catalytic properties of the enzyme is proposed.     

Nonlinear free energy relationship in the general-acid-catalyzed acylation of rat kidney gamma-glutamyl transpeptidase by a series of gamma-glutamyl anilide substrate analogues

The gamma-glutamyl transpeptidase (GGT) purified from rat kidney reacts with a series of eight parasubstituted L-glutamyl gamma-anilides, in the presence of Gly-Gly, catalyzing the formation of gamma-Glu-Gly-Gly (pH 8.0, 37 degrees C). The transpeptidation reaction was followed through the discontinuous colorimetric determination of the concentration of released parasubstituted aniline. Steady-state kinetic studies were performed to measure k(cat) and K(M) values for each anilide substrate. A Hammett plot constructed by the correlation of log(k(cat)) and the sigma(-) parameter for each anilide substrate displays statistically significant upward curvature, consistent with a general-acid-catalyzed acylation mechanism in which the geometry of the transition state changes with the nature of the para substituent. Kinetic isotope effects were measured and are consistent with a reaction involving a proton in flight at the rate-limiting transition state. The pH-rate profiles measured over pH 7.0-9.5 are bell-shaped with kinetic pK(a) values that may be attributed to the active site nucleophile (or its general-base catalytic partner) and the active-site general acid. The variation of the latter pK(a) value as a function of temperature is consistent with an enthalpy of ionization expected for an ammonium ion acting as a general acid. Examination of the variation of k(cat) as a function of temperature gave values for the enthalpy and entropy of activation that are similar to those determined for the general-acid-catalyzed breakdown of the tetrahedral intermediate formed during acylation of chymotrypsin by similar amide substrates.     

Slow-binding inhibition of gamma-glutamyl transpeptidase by gamma-boroGlu

gamma-Glutamyl transpeptidase (gammaGTase) catalyzes the transfer of the gamma-glutamyl moiety of gamma-glutamyl-derived peptides, such as glutathione (gammaGlu-Cys-Gly), and anilides, such as gamma-glutamyl-7-amido-4-methylcoumarin (gammaGlu-AMC), to acceptor molecules, including water and various dipeptides. These acyl-transfer reactions all occur through a common acyl-enzyme intermediate formed from attack of an active site hydroxyl on the gamma-carbonyl carbon of gammaGlu-X with displacement of X. In this paper, we report that gammaGTase is potently inhibited by the gamma-boronic acid analogue of L-glutamic acid, 3-amino-3-carboxypropaneboronic acid (gamma-boroGlu). We propose that gamma-boroGlu adds to the active site hydroxyl of gammaGTase to form a covalent, tetrahedral adduct that resembles tetrahedral transition states and intermediates that occur along the reaction pathway for gammaGTase-catalyzed reactions. Our studies demonstrate that gamma-boroGlu is a competitive inhibitor of the gammaGTase-catalyzed hydrolysis of gammaGlu-AMC with a K(i) value of 35 nM. Kinetics of inhibition studies allow us to estimate the following values: k(on) = 400 mM(-1) s(-1) and k(off) = 0.02 s(-1). We also found that gamma-boroGlu is an uncompetitive inhibitor of Gly-Gly-promoted transamidation of gammaGlu-AMC. This observation is consistent with the kinetic mechanism we determined for gammaGTase-catalyzed transamidation of gammaGlu-AMC by Gly-Gly to form gammaGlu-Gly-Gly. To probe rate-limiting transition states for gammaGTase catalysis and inhibition, we determined solvent deuterium isotope effects. Solvent isotope effects on k(c)/K(m) for hydrolysis of gammaGlu-AMC and k(on) for inhibition by gamma-boroGlu are identical and equal unity, suggesting that the processes governed by these rate constants are both rate-limited by a step that is insensitive to solvent deuterium such as a conformational fluctuation of the initially formed E-S or E-I complex. In contrast, the solvent isotope effect on k(c) is 2.4. k(c) is rate-limited by hydrolysis of the acyl-enzyme intermediate that is formed during reaction of gammaGTase with gammaGlu-AMC. Thus, the magnitude of this isotope effect suggests the formation of a catalytically important protonic bridge in the rate-limiting transition state for deacylation.     

Catalysis by human leukocyte elastase: mechanistic insights into specificity requirements

Steady-state kinetic parameters were determined for the human leukocyte elastase catalyzed hydrolysis of a series of peptide-based thiobenzyl esters and p-nitroanilides. The peptide units are MeOSuc-Val, MeOSuc-Alan-Pro-Val (n = 0-2), and MeOSuc-Alan-Pro-Ala (n = 1 or 2). The results of this study suggest five important mechanistic features for HLE. Few important remote subsite contacts are established in the Michaelis complex. Full recognition and tight binding of the substrate occurs in the transition state for acylation. The P3-S3 interaction is critical during acylation. Subsite contacts are unimportant in deacylation. P1 specificity is regulated by peptide length. An important steady-state kinetic consequence of this specificity is that the rate-limiting step of kc for p-nitroanilide hydrolysis changes from acylation to deacylation as the peptide chain is lengthened.     

Metal ion catalyzed hydrolysis of ethyl p-nitrophenyl phosphate

15N isotope effects in the nitro group and 18O isotope effects in the phenolic oxygen have been measured for the hydrolysis of ethyl p-nitrophenyl phosphate catalyzed by several metal ions. Co(III)-cyclen at pH 7, 50 degrees C, gave an 15N isotope effect of 0.12% and an 18O one of 2.23%, showing that P-O cleavage is rate limiting and the bond is approximately 50% broken in the transition state. The active catalyst is a dimer and the substrate is presumably coordinated to the open site of one Co(III), and is attacked by hydroxide coordinated to the other Co(III). Co(III)-tacn under the same conditions shows a similar 15N isotope effect (0.13%), but a smaller 18O one (0.8%). Zn(II)-cyclen at pH 8.5, 80 degrees C, gave an 15N isotope effect of 0.05% and an 18O one of 0.95%, suggesting an earlier transition state. The catalyst in this case is monomeric, and thus the substrate is coordinated to one position and attacked by a cis-coordinated hydroxide. Eu(III) at pH 6.5, 50 degrees C, shows a very large 15N isotope effect of 0.34% and a 1.6% 18O isotope effect. The large 15N isotope effect argues for a late transition state or Eu(III) interaction with the nitro group, and was also seen in Eu(III)-catalyzed hydrolysis of p-nitrophenyl phosphate.     

Isotope effect studies of the pyruvate-dependent histidine decarboxylase from Lactobacillus 30a

The decarboxylation of histidine by the pyruvate-dependent histidine decarboxylase of Lactobacillus 30a shows a carbon isotope effect of k12/k13 = 1.0334 +/- 0.0005 and a nitrogen isotope effect k14/k15 = 0.9799 +/- 0.0006 at pH 4.8, 37 degrees C. The carbon isotope effect is slightly increased by deuteriation of the substrate and slightly decreased in D2O. The observed nitrogen isotope effect indicates that the imine nitrogen in the substrate-Schiff base intermediate complex is ordinarily protonated, and the pH dependence of the carbon isotope effect indicates that both protonated and unprotonated forms of this intermediate are capable of undergoing decarboxylation. As with the pyridoxal 5'-phosphate dependent enzyme, Schiff base formation and decarboxylation are jointly rate-limiting, with the intermediate histidine-pyruvate Schiff base showing a decarboxylation/Schiff base hydrolysis ratio of 0.5-1.0 at pH 4.8. The decarboxylation transition state is more reactant-like for the pyruvate-dependent enzyme than for the pyridoxal 5'-phosphate dependent enzyme. These studies find no particular energetic or catalytic advantage to the use of pyridoxal 5'-phosphate over covalently bound pyruvate in catalysis of the decarboxylation of histidine.     

13C and 15N isotope effects for conversion of L-dihydroorotate to N-carbamyl-L-aspartate using dihydroorotase from hamster and Bacillus caldolyticus

In the pyrimidine biosynthetic pathway, N-carbamyl-L-aspartate (CA-asp) is converted to L-dihydroorotate (DHO) by dihydroorotase (DHOase). The mechanism of this important reaction was probed using primary and secondary 15N and 13C isotope effects on the ring opening of DHO using isotope ratio mass spectrometry (IRMS). The reaction was performed at three different temperatures (25, 37, and 45 degrees C for hamster DHOase; 37, 50, and 60 degrees C for Bacillus caldolyticus), and the product CA-asp was purified for analysis. The primary and secondary kinetic isotope effects for the ring opening of the DHO were determined from analysis of the N and C of the carbamyl group after hydrolysis. In addition, the beta-carboxyl of the residual aspartate was liberated enzymatically by transamination to oxaloacetate with aspartate aminotransferase and then decarboxylation with oxaloacetate decarboxylase. The 13C/12C ratio from the released CO2 was determined by IRMS, yielding a second primary isotope effect. The primary and secondary isotope effects for the reaction catalyzed by DHOase showed little variation between enzymes or temperatures, the primary 13C and 15N isotope effects being approximately 1% on average, while the secondary 13C isotope effect is negligible or very slightly normal (>1.0000). These data indicate that the chemistry is at least partially rate-limiting while the secondary isotope effects suggest that the transition state may have lost some bending and torsional modes leading to a slight lessening of bond stiffness at the carbonyl carbon of the amide of CA-asp. The equilibrium isotope effects for DHO --> CA-asp have also been measured (secondary 13K(eq) = 1.0028 +/- 0.0002, primary 13K(eq) = 1.0053 +/- 0.0003, primary 15K(eq) = 1.0027 +/- 0.0003). Using these equilibrium isotope effects, the kinetic isotope effects for the physiological reaction (CA-asp --> DHO) have been calculated. These values indicate that the carbon of the amide group is more stiffly bonded in DHO while the slightly lesser, but still normal, values of the primary kinetic isotope effect show that the chemistry remains at least partially rate-limiting for the physiological reaction. It appears that the ring opening and closing is the slow step of the reaction.     

Comparison of the reaction progress of calcineurin with Mn2+ and Mg2+

Activation of calcineurin by Mn2+ and Mg2+ was compared using a heavy atom isotope analogue of the substrate p-nitrophenyl phosphate (pNPP). Heavy atom isotope effects were measured for Mg2+ activation and compared to published results of the isotope effects with Mn2+ as the activating metal. Isotope effects were measured for the kinetic parameter Vmax/Km at the nonbridging oxygen atoms [18(V/K)nonbridge]; at the position of bond cleavage in the bridging oxygen atom [18(V/K)bridge]; and at the nitrogen atom in the nitrophenol leaving group [15(V/K)]. The isotope effects increased in magnitude upon changing from an optimal pH to a nonoptimal pH; the 18(V/K)bridge effect increased from 1.0154 (+/-0.0007) to 1.0198 (+/-0.0002), and the 15(V/K) effect increased from 1.0018 (+/-0. 0002) to 1.0021 (+/-0.0003). The value for 18(V/K)nonbridge is 0. 9910 (+/-0.0003) at pH 7.0. As with Mn2+, the 18(V/K)nonbridge isotope effect indicated that the dianion was the substrate for catalysis, and that a dissociative transition state was operative for the phosphoryl transfer. Comparison to results for Mn2+ activation suggested that chemistry was more rate-limiting with Mg2+ than with Mn2+. Changing the activating metal concentration showed opposite trends with increasing Mg2+ increasing the commitment factor and seemingly making the chemistry less rate-limiting. The influence of viscosity was evaluated as well to gauge the role of chemistry. The activation of calcineurin-catalyzed hydrolysis of pNPP1 by Mg2+ or Mn2+ at pH 7.0 was compared in the presence of viscogens, glycerol and poly(ethylene glycol). Increasing glycerol caused different effects with the two activators. With Mn2+ as the activator, calcineurin activity showed a normal response with kcat and kcat/Km decreasing with viscosity. There was an inverse response with Mg2+ as the activator as values of kcat/Km increased with viscosity. From values of the normalized kcat/Km with Mn2+, the chemistry was found to be partially rate-limiting, consistent with previous heavy atom isotope studies (22). The effect observed for Mg2+ seems consistent with a change in the rate-limiting step for the two different metals at pH 7.0.     

Mechanistic analysis of the unusual redox-elimination sequence employed by Thermotoga maritima BglT: a 6-phospho-beta-glucosidase from glycoside hydrolase family 4

"Classical" glycosidases utilize either direct or double-displacement mechanisms involving oxocarbenium ion-like transition states to catalyze the hydrolysis of glycosidic bonds. By contrast, the mechanism of the glycosidases in glycoside hydrolase family 4 has been recently proposed to involve NAD+-mediated redox steps along with alpha,beta-elimination and addition steps via anionic intermediates. Support for this mechanism in BglT, a 6-phospho-beta-glucosidase in family 4, has been provided through mechanistic and X-ray crystallographic analyses [Yip, V. L.Y., et al. (2004) J. Am. Chem. Soc. 126, 8354-8355] in which primary deuterium kinetic isotope effects for the hydride abstraction at C3 and for the alpha-proton abstraction at C2 indicate that these two steps are both partially rate-limiting. Current data reveal that there is no secondary deuterium kinetic isotope effect associated with the rehybridization of the C1 sp3 center to a sp2 center. Furthermore, a flat linear free energy relationship was established with a series of aryl 6-phospho-beta-D-glucosides of varying leaving group abilities. Taken together, these data indicate that cleavage of the C1-O1 linkage does not occur during a rate-limiting step. Since the deprotonation at C2 is slow and partially rate-limiting while the departure of the leaving group is not, a stepwise E1(cb)-type mechanism rather than an E1 or a concerted E2-syn mechanism is proposed. Direct evidence for the role of NAD+ was obtained by reduction in situ using NaBH4 leading to an inactive enzyme that could be reactivated by the addition of excess NAD+. This was accompanied by the expected UV-vis spectrophotometric changes.     

Leaving group dependence and proton inventory studies of the phosphorylation of a cytoplasmic phosphotyrosyl protein phosphatase from bovine heart.

The kcat and Km values for the bovine heart low molecular weight phosphotyrosyl protein phosphatase catalyzed hydrolysis of 16 aryl phosphate monoesters and of five alkyl phosphate monoesters having the structure Ar(CH2)nOPO3H2 (n = 1-5) were measured at pH 5.0 and 37 degrees C. With the exception of alpha-naphthyl phosphate and 2-chlorophenyl phosphate, which are subject to steric effects, the values of kcat are effectively constant for the aryl phosphate monoesters. This is consistent with the catalysis being nucleophilic in nature, with the existence of a common covalent phosphoenzyme intermediate, and with the breakdown of this intermediate being rate-limiting. In contrast, kcat for the alkyl phosphate monoesters is much smaller and the rate-limiting step for these substrates is interpreted to be the phosphorylation of the enzyme. A single linear correlation is observed for a plot of log (kcat/Km) vs leaving group pKa for both classes of substrates at pH 5.0: log (kcat/Km) = -0.28pKa + 6.88 (n = 19, r = 0.89), indicating a uniform catalytic mechanism for the phosphorylation event. The small change in effective charge (-0.28) on the departing oxygen of the substrate is similar to that observed in the specific acid catalyzed hydrolysis of monophosphate monoanions (-0.27) and is consistent with a strong electrophilic interaction of the enzyme with this oxygen atom in the transition state. The D2O solvent isotope effect and proton inventory experiments indicate that only one proton is "in flight" in the transition state of the phosphorylation process and that this proton transfer is responsible for the reduction of effective charge on the leaving oxygen.     

Uridine phosphorylase from Trypanosoma cruzi: kinetic and chemical mechanisms

The reversible phosphorolysis of uridine to generate uracil and ribose 1-phosphate is catalyzed by uridine phosphorylase and is involved in the pyrimidine salvage pathway. We define the reaction mechanism of uridine phosphorylase from Trypanosoma cruzi by steady-state and pre-steady-state kinetics, pH-rate profiles, kinetic isotope effects from uridine, and solvent deuterium isotope effects. Initial rate and product inhibition patterns suggest a steady-state random kinetic mechanism. Pre-steady-state kinetics indicated no rate-limiting step after formation of the enzyme-products ternary complex, as no burst in product formation is observed. The limiting single-turnover rate constant equals the steady-state turnover number; thus, chemistry is partially or fully rate limiting. Kinetic isotope effects with [1'-(3)H]-, [1'-(14)C]-, and [5'-(14)C,1,3-(15)N(2)]uridine gave experimental values of (α-T)(V/K)(uridine) = 1.063, (14)(V/K)(uridine) = 1.069, and (15,β-15)(V/K)(uridine) = 1.018, in agreement with an A(N)D(N) (S(N)2) mechanism where chemistry contributes significantly to the overall rate-limiting step of the reaction. Density functional theory modeling of the reaction in gas phase supports an A(N)D(N) mechanism. Solvent deuterium kinetic isotope effects were unity, indicating that no kinetically significant proton transfer step is involved at the transition state. In this N-ribosyl transferase, proton transfer to neutralize the leaving group is not part of transition state formation, consistent with an enzyme-stabilized anionic uracil as the leaving group. Kinetic analysis as a function of pH indicates one protonated group essential for catalysis and for substrate binding.     

Kinetic evidence for thermally induced conformational change of butyrylcholinesterase

The effect of temperature on the kinetics of human plasma butyrylcholinesterase-catalyzed reactions was studied. The Arrhenius plot of o-nitrophenylbutyrate hydrolysis presents a break at 21 degrees C. However, nucleophilic competition data indicate that there is no change in the rate-limiting step of the overall reaction. In addition, the temperature dependence of the bimolecular rate constant of enzyme carbamylation shows a break at 18 degrees C. These results argue for the existence of thermally induced conformational active states of the enzyme tetramer. It is suggested that the effects of this transition on kinetics arise at the acylation step.     

Cryoenzymology of human plasmin catalysis: comparison of cryosolvents and reactions with nitrophenyl ester and anilide substrates

A comparative study of nucleophilic (methanol), aprotic (dimethyl sulfoxide), and protic but non nucleophilic (ethylene glycol, ethylene glycol/dimethylformamide) solvents on the catalytic and structural properties of human plasmin has been made. All four solvent systems are potentially suitable as cryosolvents for plasmin catalysis at subzero temperatures although the solubility of plasmin is limited in the methanol and dimethyl sulfoxide systems. Each cryosolvent system caused minor effects on the catalytic properties of the enzyme, which could be rationalized in terms of the known physical properties of the cosolvent. Solvent systems containing ethylene glycol induce a minor conformational change which increases the catalytic efficiency of plasmin. The cosolvent effects on Km and Ki indicate that electrostatic interactions dominate the binding of both substrates and inhibitors such as benzamidine. A change in slope of the Arrhenius plots for catalysis, reflecting a temperature-induced isomerization, is observed around 0 degree C; the energies of activation being 13 +/- 2 kcal mol-1 at higher temperatures and 19 +/- 2 kcal mol-1 at subzero temperatures, and essentially independent of solvent. Deacylation was shown to be the rate-limiting step in the hydrolysis of specific p-nitrophenyl ester substrates. Previous stopped-flow studies at room temperature provided observations suggesting that a tetrahedral intermediate could be detected in the plasmin-catalyzed hydrolysis of p-nitroanilide substrates. Experiments at subzero temperatures with such substrates failed to reveal any buildup of a tetrahedral intermediate under the experimental conditions.