ATP activation of DNA polymerase III holoenzyme of Escherichia coli. I. ATP-dependent formation of an initiation complex with a primed template

ATP (or dATP) stimulates DNA synthesis by DNA polymerase III holoenzyme (holoenzyme) on the synthetic template-primer poly(dA).oligo(dT)12. Nonhydrolyzable ATP analogs and other natural (deoxy)ribonucleoside triphosphates are inactive. Because the nonhydrolyzable analog 5'-deoxyadenylylimidodiphosphate is efficiently used by holoenzyme for incorporation, the ATP (or dATP) requirement for activation of replication of natural DNA could be determined. Analysis of lag times in DNA synthesis and isolation of intermediates showed that ATP (or dATP) is required in the formation of an initiation complex between holoenzyme and primed DNA template, but not for subsequent DNA synthesis. ATP is bound to holoenzyme in the absence of DNA with a KD value of 0.8 microM; 2 to 3 molecules of ATP per molecule of holoenzyme are bound without apparent cooperativity. Binding of ATP to DNA polymerase III (holoenzyme minus beta subunit) is weak (KD greater than 5 microM) and binding to the beta subunit alone is not observed. However, holoenzyme reconstituted by mixing DNA polymerase III with beta subunit binds ATP as tightly (KD = 0.6 microM) as the original holoenzyme.     

DNA polymerase III holoenzyme of Escherichia coli. III. Distinctive processive polymerases reconstituted from purified subunits

The 10 distinctive polypeptides of DNA polymerase III holoenzyme, purified as individual subunits or complexes, could be reconstituted to generate a polymerase with the high catalytic rate of the isolated intact holoenzyme. Functions and interactions of the subunits can be inferred from partial assemblies of the pol III core (alpha, epsilon, and theta subunits) with auxiliary subunits. The core possesses the polymerase and proofreading activities; the auxiliary subunits provide the core with processivity, the capacity to replicate long stretches of DNA without dissociating from the template. In a sequence of reconstruction steps, the beta subunit binds the primed template in an ATP-dependent manner through the catalytic action of a complex made up of the gamma, delta, delta', chi, and psi polypeptides. With the beta subunit in place, a processive polymerase is produced upon addition of the core. When the tau subunit is lacking, binding of polymerase to the primed template is less efficient and stable. The tau-less reconstituted polymerase is more prone to dissociation upon encountering secondary structures in the template in its path, such as a hairpin region in the single strand or a duplex region formed by a strand annealed to the template. With the tau subunit present, the interaction of the core.beta complex (the basic unit of a processive polymerase) with the primed template is strengthened. The tau-containing reconstituted polymerase can replicate DNA continuously through secondary structures in the template. The two distinctive kinds of processivity demonstrated by the tau-less and tau-containing reconstituted polymerases fit nicely into a scheme in which, organized as an asymmetric dimeric holoenzyme, the tau half is responsible for continuous synthesis of one strand, and the less stable half for discontinuous synthesis of the other.     

DNA polymerase III holoenzyme from Thermus thermophilus identification, expression, purification of components, and use to reconstitute a processive replicase

DNA replication in bacteria is performed by a specialized multicomponent replicase, the DNA polymerase III holoenzyme, that consist of three essential components: a polymerase, the beta sliding clamp processivity factor, and the DnaX complex clamp-loader. We report here the assembly of the minimal functional holoenzyme from Thermus thermophilus (Tth), an extreme thermophile. The minimal holoenzyme consists of alpha (pol III catalytic subunit), beta (sliding clamp processivity factor), and the essential DnaX (tau/gamma), delta and delta' components of the DnaX complex. We show with purified recombinant proteins that these five components are required for rapid and processive DNA synthesis on long single-stranded DNA templates. Subunit interactions known to occur in DNA polymerase III holoenzyme from mesophilic bacteria including delta-delta' interaction, deltadelta'-tau/gamma complex formation, and alpha-tau interaction, also occur within the Tth enzyme. As in mesophilic holoenzymes, in the presence of a primed DNA template, these subunits assemble into a stable initiation complex in an ATP-dependent manner. However, in contrast to replicative polymerases from mesophilic bacteria, Tth holoenzyme is efficient only at temperatures above 50 degrees C, both with regard to initiation complex formation and processive DNA synthesis. The minimal Tth DNA polymerase III holoenzyme displays an elongation rate of 350 bp/s at 72 degrees C and a processivity of greater than 8.6 kilobases, the length of the template that is fully replicated after a single association event.     

Fluorescence energy transfer between the primer and the beta subunit of the DNA polymerase III holoenzyme.

We report here our initial success in using fluorescence energy transfer to map the position of the subunits of the DNA polymerase III holoenzyme within initiation complexes formed on primed DNA. Using primers containing a fluorescent derivative 3 nucleotides from the 3'-terminus and acceptors of fluorescence energy transfer located on Cys333 of the beta subunit, a donor-acceptor distance of 65 A was measured. Coupling this distance with other information enabled us to propose a model for the positioning of beta within initiation complexes. Examination of the fluorescence properties of a labeled primer with the unlabeled beta subunit and other assemblies of DNA polymerase III holoenzyme subunits allowed us to distinguish all of the known intermediates of the holoenzyme-catalyzed reaction. Specific fluorescence changes could be assigned for primer annealing, Escherichia coli single-stranded DNA-binding protein binding, 3'----5' exonucleolytic hydrolysis of the primer, DNA polymerase III* binding, initiation complex formation upon the addition of beta in the presence of ATP, and DNA elongation. These fluorescence changes are sufficiently large to support future detailed kinetic studies. Particularly interesting was the difference in fluorescence changes accompanying initiation complex formation as compared to binding of DNA polymerase III holoenzyme subunit assemblies. Initiation complex formation resulted in a strong fluorescence enhancement. Binding of DNA polymerase III* led to a fluorescence quenching, and transfer of beta to primed DNA by the gamma delta complex did not change the fluorescence. This demonstrates a rearrangement of subunits accompanying initiation complex formation. Monitoring fluorescence changes with labeled beta, we have determined that beta binds with a stoichiometry of one monomer/primer terminus.     

Characterization of 2'(3')-trinitrophenyl-ATP as an inhibitor of ATP-dependent initiation complex formation between the DNA polymerase III holoenzyme and primed DNA

We have identified 2'(3')-trinitrophenyl-ATP to be an inhibitor of the ATP-dependent initiation complex formation reaction between the Escherichia coli DNA polymerase III holoenzyme and primed DNA. The inhibitor is specific for the initiation stage; once initiation complexes are formed the subsequent elongation reaction is unaffected. Three ATP-dependent DNA polymerase III holoenzyme reactions can be independently assayed: the ATP-dependent formation of initiation complexes, ATP binding, and the primed DNA-dependent hydrolysis of ATP. Trinitrophenyl ATP inhibits all three reactions to a similar extent with an apparent Ki between 6 and 15 microM in the presence of 5 microM ATP. This suggests all of these reactions are related and that they proceed through a common ATP-binding site. We include an improved purification of the DNA polymerase III holoenzyme in this report.     

Adenosine 5'-O-(3-thiotriphosphate) can support the formation of an initiation complex between the DNA polymerase III holoenzyme and primed DNA

Adenosine 5'-O-(3-thiotriphosphate) (ATP gamma S) will substitute for ATP in the formation of an initiation complex between the DNA polymerase III holoenzyme of Escherichia coli and primed DNA. The initiation complex formed in the presence of ATP gamma S between the DNA polymerase III holoenzyme and single-stranded DNA-binding protein-encoated primed M13 Gori DNA is stabile and isolable by gel filtration at room temperature. Upon addition of the four required deoxynucleoside triphosphates, this complex is rapidly converted to the duplex replicative form without dissociation of the polymerase. Initiation complexes formed in the presence of either ATP gamma S or ATP are indistinguishable by their resistance to antibody directed against the beta subunit of the holoenzyme and by their ability to elongate without further activation. A 2-fold difference was observed, however, in both the extent of initiation complex formation and in the dissociation of initiation complexes once formed. This difference is discussed in the light of previous proposals regarding a dimeric polymerase capable of replicating both strands at a replication fork concurrently.     

The beta subunit dissociates readily from the Escherichia coli DNA polymerase III holoenzyme

Purified DNA polymerase III holoenzyme (holoenzyme) was separated by glycerol gradient sedimentation into the beta subunit and the subassembly that lacks it (pol III). In the presence of ATP, beta subunit dimer dissociated from holoenzyme with a KD of 1 nM; in the absence of ATP, the KD was greater than 5 nM. The beta subunit was known to remain tightly associated in the holoenzyme upon formation of an initiation complex with a primed template and during the course of replication. With separation from the template, holoenzyme dissociated into beta and pol III. Cycling to a new template depended on the reformation of holoenzyme. Holoenzyme was in equilibrium with pol III and the beta subunit in crude enzyme fractions as well as in pure preparations.     

Properties of initiation complexes formed between Escherichia coli DNA polymerase III holoenzyme and primed DNA in the absence of ATP

In the presence of ATP, the beta subunit of the Escherichia coli DNA polymerase III holoenzyme can induce a stable initiation complex with the other holoenzyme subunits and primed DNA that is capable of highly processive synthesis. We have recently demonstrated that the ATP requirement for processive synthesis can be bypassed by an excess of the beta subunit (Crute, J., LaDuca, R., Johanson, K., McHenry, C., and Bambara, R. (1983) J. Biol. Chem. 258, 11344-11349). To examine the complex formed with excess beta subunit, and the lengths of the products of processive synthesis, we have designed a uniquely primed DNA template. Poly(dA)4000 was tailed with dCTP by terminal deoxynucleotidyl transferase and the resulting template annealed to oligo(dG)12-18. In the presence of excess beta, the lengths of processively extended primers nearly equaled the full-length of the DNA template. Similar length synthesis occurred in the presence or absence of spermidine or single-stranded DNA-binding protein. When the beta subunit was present at normal holoenzyme stoichiometry it could induce highly processive synthesis without ATP, although inefficiently. Both ATP and excess beta increased the amount of initiation complex formation, but complexes produced with excess beta did so without the time delay observed with ATP, suggesting different mechanisms for formation. Almost 50% of initiation complexes formed without ATP survived a 30-min incubation with anti-beta IgG, reflecting a stability similar to those formed with ATP. The ability to form initiation complexes in the absence of ATP permitted the demonstration that cycling of the holoenzyme to a new primer, after chain termination with a dideoxynucleotide, is not affected by the presence of ATP.     

DNA Polymerase III holoenzyme of Escherichia coli. IV. The holoenzyme is an asymmetric dimer with twin active sites

Pol III, a subassembly of Escherichia coli DNA polymerase III holoenzyme lacking only the auxiliary beta subunit, was purified to homogeneity by an improved procedure. This assembly consists of nine different polypeptides, likely in a 1:1 stoichiometry: a catalytic core (pol III) of alpha (132 kDa), epsilon (27 kDa), and theta (10 kDa), and six auxiliary subunits: tau (71 kDa), gamma (52 kDa), delta (35 kDa), delta' (33 kDa), chi (15 kDa), and psi (12 kDa). The assembly behaves on gel filtration as a particle of about 800 kDa, indicating a content of two each of the subunits. A new procedure for purifying the core yielded a novel dimeric form which may provide the foundation for the dimeric nature of the more complex pol III and holoenzyme forms. Pol III readily dissociates into several subassemblies including pol III', likely a dimeric core with two tau subunits. The holoenzyme, purified by a similar procedure with ATP and Mg2+ present throughout, retained the beta subunit (37 kDa) as well as all the subunits present in pol III; the mass of the holoenzyme was estimated to be 900 kDa. The isolated initiation complex of holoenzyme with a primed template DNA and the elongation complex (formed in the presence of three deoxynucleoside triphosphates) had the same composition and stoichiometry as observed for pol III with two beta dimers in addition. An initiation complex assembled from a mixture of monomeric pol III core, gamma 2 delta delta' chi psi complex (gamma complex), beta, and tau retained the core, one beta dimer, and two tau subunits but was deficient in the gamma complex. When tau was omitted from the assembly mixture, the initiation complex contained one or two gamma complexes instead of the tau subunit. Based on these data, pol III holoenzyme is judged to be an asymmetric dimeric particle with twin pol III core active sites and two different sets of auxiliary units designed to achieve essentially concurrent replication of both leading and lagging strand templates.     

Stimulation of the processivity of the DNA polymerase of bacteriophage T4 by the polymerase accessory proteins. The role of ATP hydrolysis

In this paper we examine the role of the DNA polymerase accessory proteins in modulating the processivity of DNA synthesis by the bacteriophage T4-coded five protein "holoenzyme" replication complex in vitro. Primed single-stranded DNA was used as a template for the DNA synthesis reactions, and buffer conditions were chosen to mimic in vivo salt concentrations. We find that the accessory proteins significantly increase the DNA-bound lifetime of the holoenzyme complex but that the maximum lifetime of the complex is still less than 10 s at 22 degrees C. The accessory proteins greatly enhance the processivity of the holoenzyme relative to that of the polymerase alone. ATP hydrolysis catalyzed by the accessory proteins complex is required to achieve this enhancement. We have investigated the temporal relationship between ATP hydrolysis by the accessory proteins and primer elongation by the holoenzyme and find that ATPase activity is required for initial assembly of the holoenzyme complex but not for elongation per se. Thus we conclude that the increased processivity displayed by the holoenzyme in moving through regions of template secondary structure reflects the high intrinsic processivity of the holoenzyme complex itself rather than a requirement for a concomitant ATPase-driven helicase activity during elongation. We have also measured the ATPase activity of the accessory proteins as a function of polymerase concentration and find that the rate of ATP hydrolysis catalyzed by this complex decreases significantly when the accessory proteins are assembled (with polymerase and gene 32 protein) into the five-protein holoenzyme and coupled to primer elongation. Based on these results we discuss mechanisms by which the ATPase activity of the polymerase accessory proteins might stimulate the overall processivity of the holoenzyme.     

Accessory proteins bind a primed template and mediate rapid cycling of DNA polymerase III holoenzyme from Escherichia coli

DNA polymerase III holoenzyme was assembled from pure proteins onto a primer template scaffold. The assembly process could be divided into two stages. In the time-consuming first stage, beta subunit and gamma.delta subunit complex were required in forming a tightly bound ATP-activated "preinitiation complex" with a single-stranded DNA bacteriophage circle uniquely primed with a synthetic pentadecadeoxyribonucleotide. This finding substantiates an earlier study using crude protein preparations in a homopolymer system lacking Escherichia coli single-stranded DNA binding protein (Wickner, S. (1976) Proc. Natl. Acad. Sci. U. S. A. 73, 3511-3515). In the second stage, the polymerase III core and the tau subunit rapidly seek out and bind the preinitiation complex to form DNA polymerase III holoenzyme capable of rapid and entirely processive replication of the circular DNA. ATP is not required beyond formation of the preinitiation complex. It is remarkable that the fully assembled DNA polymerase III holoenzyme is so stably bound to the primed DNA circle (4-min half-time of dissociation), yet upon completing a round of synthesis the polymerase cycles within 10 s to a new preinitiation complex on a challenge primed DNA circle. Efficient polymerase cycling only occurred when challenge primed DNA was endowed with a preinitiation complex implying that cycling is mediated by a polymerase subassembly which dissociates from its accessory proteins and associates with a new preinitiation complex. These subunit dynamics suggest mechanisms for polymerase cycling on the lagging strand of replication forks in a growing chromosome.     

Dynamics of DNA polymerase III holoenzyme of Escherichia coli in replication of a multiprimed template

Movements of DNA polymerase III holoenzyme (holoenzyme) in replicating a template multiprimed with synthetic pentadecadeoxynucleotides (15-mers) annealed at known positions on a single-stranded circular or linear DNA have been analyzed. After extension of one 15-mer on a multiprimed template, holoenzyme moves downstream in the direction of chain elongation to the next primer. Holoenzyme readily traverses a duplex, even 400 base pairs long, to exploit its 3'-hydroxyl end as the next available primer. This downstream polarity likely results from an inability to diffuse upstream along single-stranded DNA. These holoenzyme movements, unlike formation of the initial complex with a primer, do not require ATP. Time elapsed between completion of a chain and initiation on the next downstream primer is rapid (1 s or less); dissociation of holoenzyme to form a complex with another primed template is slow (1-2 min). Thus, holoenzyme diffuses rapidly only on duplex DNA, probably in both directions, and forms an initiation complex with the first primer encountered. Based on these findings, schemes can be considered for holoenzyme action at the replication fork of a duplex chromosome.     

The DNA polymerase III holoenzyme: an asymmetric dimeric replicative complex with leading and lagging strand polymerases.

The DNA Polymerase III holoenzyme forms initiation complexes on primed DNA in an ATP-dependent reaction. We demonstrate that the nonhydrolyzable ATP analog, ATP gamma S, supports the formation of an isolable leading strand complex that loads and replicates the lagging strand only in the presence of ATP, beta, and the single-stranded DNA binding protein. The single endogenous DnaX complex within DNA polymerase III holoenzyme assembles beta onto both the leading and lagging strand polymerases by an ordered mechanism. The dimeric replication complex disassembles in the opposite order from which it assembled. Upon ATP gamma S-induced dissociation, the leading strand polymerase is refractory to disassembly allowing cycling to occur exclusively on the lagging strand. These results establish holoenzyme as an intrinsic asymmetric dimer with distinguishable leading and lagging strand polymerases.     

Analysis of the ATPase subassembly which initiates processive DNA synthesis by DNA polymerase III holoenzyme.

The gamma complex (gamma delta delta' chi psi) subassembly of DNA polymerase III holoenzyme transfers the beta subunit onto primed DNA in a reaction which requires ATP hydrolysis. Once on DNA, beta is a "sliding clamp" which tethers the polymerase to DNA for highly processive synthesis. We have examined beta and the gamma complex to identify which subunit(s) hydrolyzes ATP. We find the gamma complex is a DNA dependent ATPase. The beta subunit, which lacks ATPase activity, enhances the gamma complex ATPase when primed DNA is used as an effector. Hence, the gamma complex recognizes DNA and couples ATP hydrolysis to clamp beta onto primed DNA. Study of gamma complex subunits showed no single subunit contained significant ATPase activity. However, the heterodimers, gamma delta and gamma delta', were both DNA-dependent ATPases. Only the gamma delta ATPase was stimulated by beta and was functional in transferring the beta from solution to primed DNA. Similarity in ATPase activity of DNA polymerase III holoenzyme accessory proteins to accessory proteins of phage T4 DNA polymerase and mammalian DNA polymerase delta suggests the basic strategy of chromosome duplication has been conserved throughout evolution.     

The beta subunit of the Escherichia coli DNA polymerase III holoenzyme interacts functionally with the catalytic core in the absence of other subunits

We have previously demonstrated that the addition of a stoichiometric excess of the beta subunit of Escherichia coli DNA polymerase III holoenzyme to DNA polymerase III or holoenzyme itself can lead to an ATP-independent increase in the processivity of these enzyme forms (Crute, J. J., LaDuca, R. J., Johanson, K. O., McHenry, C. S., and Bambara, R. A. (1983) J. Biol. Chem. 258, 11344-11349). Here, we show that the beta subunit can interact directly with the catalytic core of the holoenzyme, DNA polymerase III, generating a new form of the enzyme with enhanced catalytic and processive capabilities. The addition of saturating levels of the beta subunit to the core DNA polymerase III enzyme results in as much as a 7-fold stimulation of synthetic activity. Two populations of DNA products were generated by the DNA polymerase III X beta enzyme complex. Short products resulting from the addition of 5-10 nucleotides/primer fragment were generated by DNA polymerase III in the presence and absence of added beta subunit. A second population of much longer products was generated only in beta-supplemented DNA polymerase III reactions. The DNA polymerase III-beta reaction was inhibited by single-stranded DNA binding protein and was unaffected by ATP, distinguishing it from the holoenzyme-catalyzed reaction. Complex formation of the DNA polymerase III core enzyme with beta increased the residence time of the enzyme on synthetic DNA templates. Our results demonstrate that the beta stimulation of DNA polymerase III can be attributed to a more efficient and highly processive elongation capability of the DNA polymerase III X beta complex. They also prove that at least part of beta's normal contribution to the DNA polymerase III holoenzyme reaction takes place through interaction with DNA polymerase III core enzyme components to produce the essential complex necessary for efficient elongation in vivo.     

A model for Escherichia coli DNA polymerase III holoenzyme assembly at primer/template ends. DNA triggers a change in binding specificity of the gamma complex clamp loader

The gamma complex of the Escherichia coli DNA polymerase III holoenzyme assembles the beta sliding clamp onto DNA in an ATP hydrolysis-driven reaction. Interactions between gamma complex and primer/template DNA are investigated using fluorescence depolarization to measure binding of gamma complex to different DNA substrates under steady-state and presteady-state conditions. Surprisingly, gamma complex has a much higher affinity for single-stranded DNA (K(d) in the nM range) than for a primed template (K(d) in the microM range) under steady-state conditions. However, when examined on a millisecond time scale, we find that gamma complex initially binds very rapidly and with high affinity to primer/template DNA but is converted subsequently to a much lower affinity DNA binding state. Presteady-state data reveals an effective dissociation constant of 1.5 nM for the initial binding of gamma complex to DNA and a dissociation constant of 5.7 microM for the low affinity DNA binding state. Experiments using nonhydrolyzable ATPgammaS show that ATP binding converts gamma complex from a low affinity "inactive" to high affinity "active" DNA binding state while ATP hydrolysis has the reverse effect, thus allowing cycling between active and inactive DNA binding forms at steady-state. We propose that a DNA-triggered switch between active and inactive states of gamma complex provides a two-tiered mechanism enabling gamma complex to recognize primed template sites and load beta, while preventing gamma complex from competing with DNA polymerase III core for binding a newly loaded beta.DNA complex.     

The delta and delta ' subunits of the DNA polymerase III holoenzyme are essential for initiation complex formation and processive elongation.

delta and delta' are required for assembly of the processivity factor beta(2) onto primed DNA in the DNA polymerase III holoenzyme-catalyzed reaction. We developed protocols for generating highly purified preparations of delta and delta'. In holoenzyme reconstitution assays, delta' could not be replaced by delta, tau, or gamma, even when either of the latter were present at a 10,000-fold molar excess. Likewise, delta could not be replaced by delta', tau, or gamma. Bacterial strains bearing chromosomal knockouts of either the holA(delta) or holB(delta') genes were not viable, demonstrating that both delta and delta' are essential. Western blots of isolated initiation complexes demonstrated the presence of both delta and delta'. However, in the absence of chipsi and single-stranded DNA-binding protein, a stable initiation complex lacking deltadelta' was isolated by gel filtration. Lack of delta-delta' decreased the rate of elongation about 3-fold, and the extent of processive replication was significantly decreased. Adding back delta-delta' but not chipsi, delta, or delta' alone restored the diminished activity, indicating that in addition to being key components required for the beta loading activity of the DnaX complex, deltadelta' is present in initiation complex and is required for processive elongation.     

Molecular mechanism and energetics of clamp assembly in Escherichia coli. The role of ATP hydrolysis when gamma complex loads beta on DNA

Escherichia coli DNA polymerase III holoenzyme is a multisubunit composite containing the beta sliding clamp and clamp loading gamma complex. The gamma complex requires ATP to load beta onto DNA. A two-color fluorescence spectroscopic approach was utilized to study this system, wherein both assembly (red fluorescence; X-rhodamine labeled DNA anisotropy assay) and ATP hydrolysis (green fluorescence; phosphate binding protein assay) were simultaneously measured with millisecond timing resolution. The two temporally correlated stopped-flow signals revealed that a preassembled beta. gamma complex composite rapidly binds primer/template DNA in an ATP hydrolysis independent step. Once bound, two molecules of ATP are rapidly hydrolyzed (approximately 34 s(-1)). Following hydrolysis, gamma complex dissociates from the DNA ( approximately 22 s(-1)). Once dissociated, the next cycle of loading is severely compromised, resulting in steady-state ATP hydrolysis rates with a maximum of only approximately 3 s(-1). Two single-site beta dimer interface mutants were examined which had impaired steady-state rates of ATP hydrolysis. The pre-steady-state correlated kinetics of these mutants revealed a pattern essentially identical to wild type. The anisotropy data showed that these mutants decrease the steady-state rates of ATP hydrolysis by causing a buildup of "stuck" binary-ternary complexes on the primer/template DNA.     

Prereplicative complexes of components of DNA polymerase III holoenzyme of Escherichia coli.

Stepwise reconstitution of the subunits of DNA polymerase III holoenzyme of Escherichia coli offers insights into the organization and function of this multisubunit assembly. A highly processive, holoenzyme-like activity can be generated when the gamma complex, in the presence of ATP and a primed template, activates the beta subunit to form a preinitiation complex, and this is then followed by addition of the core polymerase. Further analysis of early replicative complexes has now revealed: 1) that the gamma complex can stably bind a single-stranded DNA binding protein (SSB)-coated template, 2) that neither SSB coating of the template nor a proper primer terminus is required to form the preinitiation complex, and 3) that the gamma complex stabilizes the preinitiation complex in the presence of ATP and destabilizes it in the presence of adenosine 5'-O-(thiotriphosphate). Based on these findings, a sequence of stages can be formulated for an activation of the beta subunit that enables it to bind the template-primer and thereby interact with the core to create a processive polymerase.