1,2-Dehydroreticuline synthase, the branch point enzyme opening the morphinan biosynthetic pathway

A synthase which oxidizes (S)-reticuline to 1,2-dehydroreticuline has been found to occur in seedlings of opium poppy (Papaver somniferum L.). Due to its instability, this enzyme could only be partly purified (ca. 5-fold enrichment). Partial characterization at this stage of purification showed that it does not need a redox cofactor and accepts both (S)-reticuline and (S)-norreticuline as substrates. [1-(2)H, (13)C]-(R,S)-reticuline was enzymatically converted into [1-(13)C]-dehydroreticuline, which has been identified by mass spectrometry. Release of the hydrogen atom in position C-1 of the isoquinoline alkaloid during the oxidative conversion, was exploited as a sensitive assay system for this enzyme. The enzyme has a pH optimum of 8.75, a temperature optimum of 37 degrees C and the apparent K(M) value for the substrate reticuline was shown to be 117 microM. Moreover it could be demonstrated by sucrose density gradient centrifugation that the enzyme is located in vesicles of varying size. In combination with the previously discovered strictly stereoselective and NADPH dependent 1,2-dehydroreticuline reductase the detection of this enzyme, the 1,2-dehydroreticuline synthase, provides the necessary inversion of configuration and completes the pathway from two molecules of L-tyrosine via (S)-norcoclaurine to (R)-reticuline in opium poppy involving a total number of 11 enzymes.     

Purification, cloning, and functional expression of phenylalanine aminomutase: the first committed step in Taxol side-chain biosynthesis

The biomechanical functions of articular cartilage are governed largely by the composition and density of its specialized extracellular matrix. Relationships between matrix density and functional indices such as mechanical properties or interstitial solute diffusivities have been previously explored. However, direct correlations between mechanical properties and solute transport parameters have received less attention, despite potential application of this information for cartilage functional assessment both in vivo and in vitro. The objective of this study was therefore to examine relationships among solute diffusivities, mechanical properties, and matrix density of compressed articular cartilage. Matrix density varied due to natural variation among explants and due to applied static compression. Matrix density of statically compressed cartilage explants was characterized by glycoaminoglycan (GAG) weight fraction and fluid volume fraction, while diffusion coefficients of a wide range of solutes were measured to characterize the transport environment. Explant mechanical properties were characterized by a non-linear Young's modulus (axial stress-strain ratio) and a non-linear Poisson's ratio (radial-to-axial strain ratio). Solute diffusivities were consistently correlated with Young's modulus, as well as with explant GAG weight and fluid volume fractions. Therefore, in vitro mechanical tests may provide a means of assessing transport environments in cartilage-like materials, while in vivo measurements of solute transport (for example with magnetic resonance imaging) may be a useful complement in identifying localized differences in matrix density and mechanical properties.     

Properties of phosphoenolpyruvate mutase,the first enzyme in the aminoethylphosphonate biosynthetic pathway in Trypanosoma cruzi

Phosphoenolpyruvate (PEP) mutase catalyzes the conversion of phosphoenolpyruvate to phosphonopyruvate, the initial step in the formation of many naturally occurring phosphonate compounds. The phosphonate compound 2-aminoethylphosphonate is present as a component of complex carbohydrates on the surface membrane of many trypanosomatids including glycosylinositolphospholipids of Trypanosoma cruzi. Using partial sequence information from the T. cruzi genome project we have isolated a full-length gene with significant homology to PEP mutase from the free-living protozoan Tetrahymena pyriformis and the edible mussel Mytilus edulis. Recombinant expression in Escherichia coli confirms that it encodes a functional PEP mutase with a Km apparent of 8 microM for phosphonopyruvate and a kcat of 12 s-1. The native enzyme is a homotetramer with an absolute requirement for divalent metal ions and displays negative cooperativity for Mg2+ (S0.5 0.4 microM; n = 0.46). Immunofluorescence and sub-cellular fractionation indicates that PEP mutase has a dual localization in the cell. Further evidence to support this was obtained by Western analysis of a partial sub-cellular fractionation of T. cruzi cells. Southern and Western analysis suggests that PEP mutase is unique to T. cruzi and is not present in the other medically important parasites, Trypanosoma brucei and Leishmania spp.     

Amorpha-4,11-diene synthase: cloning and functional expression of a key enzyme in the biosynthetic pathway of the novel antimalarial drug artemisinin

The sesquiterpenoid artemisinin, isolated from the plant Artemisia annua L., and its semi-synthetic derivatives are a new and very effective group of antimalarial drugs. A branch point in the biosynthesis of this compound is the cyclisation of the ubiquitous precursor farnesyl diphosphate into the first specific precursor of artemisinin, namely amorpha-4,11-diene. Here we describe the isolation of a cDNA clone encoding amorpha-4,11-diene synthase. The deduced amino acid sequence exhibits the highest identity (50%) with a putative sesquiterpene cyclase of A. annua. When expressed in Escherichia coli, the recombinant enzyme catalyses the formation of amorpha-4,11-diene from farnesyl diphosphate. Introduction of the gene into tobacco (Nicotiana tabacum L.) resulted in the expression of an active enzyme and the accumulation of amorpha-4,11-diene ranging from 0.2 to 1.7 ng per g fresh weight. Received: 8 June 2000 / Accepted: 21 August 2000     

p‐Coumaroyl‐CoA:monolignol transferase (PMT) acts specifically in the lignin biosynthetic pathway in Brachypodium distachyon

Grass lignins contain substantial amounts of p‐coumarate (pCA) that acylate the side‐chains of the phenylpropanoid polymer backbone. An acyltransferase, named p‐coumaroyl‐CoA:monolignol transferase (OsPMT), that could acylate monolignols with pCA in vitro was recently identified from rice. In planta, such monolignol‐pCA conjugates become incorporated into lignin via oxidative radical coupling, thereby generating the observed pCA appendages; however p‐coumarates also acylate arabinoxylans in grasses. To test the authenticity of PMT as a lignin biosynthetic pathway enzyme, we examined Brachypodium distachyon plants with altered BdPMT gene function. Using newly developed cell wall analytical methods, we determined that the transferase was involved specifically in monolignol acylation. A sodium azide‐generated Bdpmt‐1 missense mutant had no (<0.5%) residual pCA on lignin, and BdPMT RNAi plants had levels as low as 10% of wild‐type, whereas the amounts of pCA acylating arabinosyl units on arabinoxylans in these PMT mutant plants remained unchanged. pCA acylation of lignin from BdPMT‐overexpressing plants was found to be more than three‐fold higher than that of wild‐type, but again the level on arabinosyl units remained unchanged. Taken together, these data are consistent with a defined role for grass PMT genes in encoding BAHD (BEAT, AHCT, HCBT, and DAT) acyltransferases that specifically acylate monolignols with pCA and produce monolignol p‐coumarate conjugates that are used for lignification in planta.     

The crystal structure of the first enzyme in the pantothenate biosynthetic pathway,ketopantoate hydroxymethyltransferase,from M tuberculosis

Ketopantoate hydroxymethyltransferase (KPHMT) catalyzes the first committed step in the biosynthesis of pantothenate, which is a precursor to coenzyme A and is required for penicillin biosynthesis. The crystal structure of KPHMT from Mycobacterium tuberculosis was determined by the single anomalous substitution (SAS) method at 2.8 A resolution. KPHMT adopts a structure that is a variation on the (beta/alpha) barrel fold, with a metal binding site proximal to the presumed catalytic site. The protein forms a decameric complex, with subunits in opposing pentameric rings held together by a swapping of their C-terminal alpha helices. The structure reveals KPHMT's membership in a small, recently discovered group of (beta/alpha) barrel enzymes that employ domain swapping to form a variety of oligomeric assemblies. The apparent conservation of certain detailed structural characteristics suggests that KPHMT is distantly related by divergent evolution to enzymes in unrelated pathways, including isocitrate lyase and phosphoenolpyruvate mutase.     

Cyanobacterial sulfide-quinone reductase: cloning and heterologous expression

The gene encoding sulfide-quinone reductase (SQR; E.C.1.8.5.'), the enzyme catalyzing the first step of anoxygenic photosynthesis in the filamentous cyanobacterium Oscillatoria limnetica, was cloned by use of amino acid sequences of tryptic peptides as well as sequences conserved in the Rhodobacter capsulatus SQR and in an open reading frame found in the genome of Aquifex aeolicus. SQR activity was also detected in the unicellular cyanobacterium Aphanothece halophytica following sulfide induction, with a V(max) of 180 micromol of plastoquinone-1 (PQ-1) reduced/mg of chlorophyll/h and apparent K(m) values of 20 and 40 microM for sulfide and quinone, respectively. Based on the conserved sequences, the gene encoding A. halophytica SQR was also cloned. The SQR polypeptides deduced from the two cyanobacterial genes consist of 436 amino acids for O. limnetica SQR and 437 amino acids for A. halophytica SQR and show 58% identity and 74% similarity. The calculated molecular mass is about 48 kDa for both proteins; the theoretical isoelectric points are 7.7 and 5.6 and the net charges at a neutral pH are 0 and -14 for O. limnetica SQR and A. halophytica SQR, respectively. A search of databases showed SQR homologs in the genomes of the cyanobacterium Anabaena PCC7120 as well as the chemolithotrophic bacteria Shewanella putrefaciens and Thiobacillus ferrooxidans. All SQR enzymes contain characteristic flavin adenine dinucleotide binding fingerprints. The cyanobacterial proteins were expressed in Escherichia coli under the control of the T7 promoter. Membranes isolated from E. coli cells expressing A. halophytica SQR performed sulfide-dependent PQ-1 reduction that was sensitive to the quinone analog inhibitor 2n-nonyl-4-hydroxyquinoline-N-oxide. The wide distribution of SQR genes emphasizes the important role of SQR in the sulfur cycle in nature.     

Early developmental expression of the gene encoding glucosylceramide synthase,the enzyme controlling the first committed step of glycosphingolipid synthesis

Glycosphingolipids (GSLs) are ubiquitous plasma membrane components composed of a ceramide lipid anchor attached to one of a diverse complement of oligosaccharide structures. Fundamentally important activities have been attributed to GSLs including formation of plasma membrane structures involved in membrane trafficking, signal transduction and cell-cell interactions. Glucosylceramide synthase converts ceramide to glucosylceramide, a core structure of the vast majority of GSLs. Disruption of the gene encoding glucosylceramide synthase (Ugcg) caused embryonic lethality in mice during gastrulation. To further investigate the role of GSL synthesis during embryogenesis, we produced mice with a Lacz reporter gene inserted into the glucosylceramide synthase locus. These mice allowed the visualization of glucosylceramide synthase expression during early embryonic development.     

Gene-enzyme relationships of the purine biosynthetic pathway in Bacillus subtilis

Summary The gene-enzyme relationship has been established for most of the steps of the purine de novo biosynthetic pathway in Bacillus subtilis. The synthesis of inosine monophosphate (IMP) involves ten steps, and the branching from IMP to AMP and to guanosine monophoshate (GMP) synthesis both require two steps. To avoid confusion in the nomenclature of the pur genes we have adopted the Escherichia coli system for B. subtilis. The two genes specifying the enzymes catalysing the conversion of IMP to succinyl-AMP (purA), and the conversion of IMP to xanthosine monophosphate (guaB), occur as single units whilst the other purine genes are clustered at 55 degrees on the B. subtilis linkage map. Based on transformation and transduction studies, and on complementation studies using B. subtilis pur genes cloned in plasmids, the arrangement of some of the clustered genes has been determined relative to outside markers. The following gene order has been established: pbuG-purB-purF-purM-purH-purD-tre. Three other genes were also found to be located in the cluster, guaA, purL and purE/C. However, we were not able to find their exact location. When the purF, purM, purD and purB genes of B. subtilis are present in plasmids they are capable of directing the synthesis in E. coli of phosphoribosylpyrophosphate amidotransferase (purF), aminoimidazole ribonucleotide synthetase (purM), glycinamide ribonucleotide synthetase (purD) and adenylosuccinate lyase (purB), respectively.     

Molecular cloning, characterization and expression of a jasmonate biosynthetic pathway gene encoding allene oxide cyclase from Camptotheca acuminata

AOC (allene oxide cyclase; EC 5.3.99.6), an essential enzyme in jasmonic acid and its methyl ester biosynthesis, was cloned from Camptotheca acuminata (named as CaAOC), a native medicinal plant species in China. CaAOC had significant similarity at the amino-acid level with AOCs from other plant species. Comparison between the sequences of the full-length cDNA and genomic DNA of CaAOC revealed that the genomic DNA of CaAOC contained an 89-bp intron and a 240-bp intron. Southern-blot analysis indicated that CaAOC was a multiple-copy gene, and real-time quantitative PCR analysis showed that CaAOC was expressed constitutively in all organs tested, with the highest expression level in leaves. The results from treatment experiments using different signalling components, including methyl jasmonate, abscisic acid, salicylic acid and H(2)O(2), revealed that expression of CaAOC had a prominent diversity. Heavy metal (copper) significantly enhanced CaAOC expression, whereas wounding (induced by UV-B) was not so effective.     

Cytosolic triacylglycerol biosynthetic pathway in oilseeds. Molecular cloning and expression of peanut cytosolic diacylglycerol acyltransferase

Triacylglycerols (TAGs) are the most important storage form of energy for eukaryotic cells. TAG biosynthetic activity was identified in the cytosolic fraction of developing peanut (Arachis hypogaea) cotyledons. This activity was NaF insensitive and acyl-coenzyme A (CoA) dependent. Acyl-CoA:diacylglycerol acyltransferase (DGAT) catalyzes the final step in TAG biosynthesis that acylates diacylglycerol to TAG. Soluble DGAT was identified from immature peanuts and purified by conventional column chromatographic procedures. The enzyme has a molecular mass of 41 +/- 1.0 kD. Based on the partial peptide sequence, a degenerate probe was used to obtain the full-length cDNA. The isolated gene shared less than 10% identity with the previously identified DGAT1 and 2 families, but has 13% identity with the bacterial bifunctional wax ester/DGAT. To differentiate the unrelated families, we designate the peanut gene as AhDGAT. Expression of peanut cDNA in Escherichia coli resulted in the formation of labeled TAG and wax ester from [14C]acetate. The recombinant E. coli showed high levels of DGAT activity but no wax ester synthase activity. TAGs were localized in transformed cells with Nile blue A and oil red O staining. The recombinant and native DGAT was specific for 1,2-diacylglycerol and did not utilize hexadecanol, glycerol-3-phosphate, monoacylglycerol, lysophosphatidic acid, and lysophosphatidylcholine. Oleoyl-CoA was the preferred acyl donor as compared to palmitoyl- and stearoyl-CoAs. These data suggest that the cytosol is one of the sites for TAG biosynthesis in oilseeds. The identified pathway may present opportunities of bioengineering oil-yielding plants for increased oil production.