Circular permutation and deletion studies of myoglobin indicate that the correct position of its N-terminus is required for native stability and solubility but not for native-like heme binding and folding

We studied the effect of deleted and circularly permuted mutations in sperm whale myoglobin and present here results on three classes of mutants: (i) a deletion mutant, Mb(1)(-)(99), in which the C-terminal helices, G and H, were removed; (ii) two circular permutations, Mb-B_GHA, in which helix B is N-terminal and helix A is C-terminal, and Mb-C_GHAB, in which helix C is N-terminal and helices A and B are C-terminal; and (iii) a deleted circular permutation, Mb-HAB_F, in which helix H is N-terminal, helix F is C-terminal, and helix G is deleted. The conformational characteristics of the apo and holo forms of these mutants were determined at neutral pH, by spectroscopic and hydrodynamic methods. The apo form of the deleted and permuted mutants exhibited a stronger tendency to aggregate and had lower ellipticity than the wild type. The mutants retained the ability to bind heme, but only the circularly permuted holoproteins had native-like heme binding and folding. These results agree with the theory that myoglobin has a central core that is able to bind heme, but also indicate that the presence of N- and C-terminal helices is necessary for native-like heme pocket formation. Because the holopermuteins were less stable than the wild-type protein and aggregated, we propose that the native position of the N-terminus is important for the precise structural architecture of myoglobin.     

Circular permutation within the coenzyme binding domain of the tetrameric glyceraldehyde-3-phosphate dehydrogenase from Bacillus stearothermophilus.

A circularly permuted (cp) variant of the phosphorylating NAD-dependent glyceraldehyde-3-phosphate dehydrogenase (GAPDH) from Bacillus stearothermophilus has been constructed with N- and C-termini created within the coenzyme binding domain. The cp variant has a kcat value equal to 40% of the wild-type value, whereas Km and KD values for NAD show a threefold decrease compared to wild type. These results indicate that the folding process and the conformational changes that accompany NAD binding during the catalytic event occur efficiently in the permuted variant and that NAD binding is tighter. Reversible denaturation experiments show that the stability of the variant is only reduced by 0.7 kcal/mol compared to the wild-type enzyme. These experiments confirm and extend results obtained recently on other permuted proteins. For multimeric proteins, such as GAPDH, which harbor subunits with two structural domains, the natural location of the N- and C-termini is not a prerequisite for optimal folding and biological activity.     

In vivo formation of allosteric aspartate transcarbamoylase containing circularly permuted catalytic polypeptide chains: implications for protein folding and assembly.

Because the N- and C-terminal amino acids of the catalytic (c) polypeptide chains of Escherichia coli aspartate transcarbamoylase (ATCase) are in close proximity to each other, it has been possible to form in vivo five different active ATCase variants in which the terminal regions of the wild-type c chains are linked in a continuous polypeptide chain and new termini are introduced elsewhere in either of the two structural domains of the c chain. These circularly permuted (cp) chains were produced by constructing tandem pyrB genes, which encode the c chain of ATCase, followed by application of PCR. Chains expressed in this way assemble efficiently in vivo to form active, stable ATCase variants. Three such variants have been purified and shown to have the kinetic and physical properties characteristic of wild-type ATCase composed of two catalytic (C) trimers and three regulatory (R) dimers. The values of Vmax for cpATCase122, cpATCase222, and cpATCase281 ranged from 16-21 mumol carbamoylaspartate per microgram per h, compared with 15 for wild-type ATCase, and the values for K0.5 for the variants were 4-17 mM aspartate, whereas wild-type ATCase exhibited a value of 6 mM. Hill coefficients for the three variants varied from 1.8 to 2.1, compared with 1.4 for the wild-type enzyme. As observed with wild-type ATCase, ATP activated the variants containing the circularly permuted chains, as shown by the lowering of K0.5 for aspartate and a decrease in the Hill coefficient (nH). In contrast, CTP caused both an increase in K0.5 and nH for the variants, just as observed with wild-type ATCase. Thus, the enzyme containing the permuted chains with widely diverse N- and C-termini exhibited the homotropic and heterotropic effects characteristic of wild-type ATCase. The decrease in the sedimentation coefficient of the variants caused by the binding of the bisubstrate ligand N-(phosphonacetyl)-L-aspartate (PALA) was also virtually identical to that obtained with wild-type ATCase, thereby indicating that these altered ATCase molecules undergo the analogous ligand-promoted allosteric transition from the taut (T) state to the relaxed (R) conformation. These ATCase molecules with new N- and C-termini widely dispersed throughout the c chains are valuable models for studying in vivo and in vitro folding of polypeptide chains.     

Towards Tricking a Pathogen’s Protease into Fighting Infection: The 3D Structure of a Stable Circularly Permuted Onconase Variant Cleavedby HIV-1 Protease

Onconase® is a highly cytotoxic amphibian homolog of Ribonuclease A. Here, we describe the construction of circularly permuted Onconase® variants by connecting the N- and C-termini of this enzyme with amino acid residues that are recognized and cleaved by the human immunodeficiency virus protease. Uncleaved circularly permuted Onconase® variants are unusually stable, non-cytotoxic and can internalize in human T-lymphocyte Jurkat cells. The structure, stability and dynamics of an intact and a cleaved circularly permuted Onconase® variant were determined by Nuclear Magnetic Resonance spectroscopy and provide valuable insight into the changes in catalytic efficiency caused by the cleavage. The understanding of the structural environment and the dynamics of the activation process represents a first step toward the development of more effective drugs for the treatment of diseases related to pathogens expressing a specific protease. By taking advantage of the protease’s activity to initiate a cytotoxic cascade, this approach is thought to be less susceptible to known resistance mechanisms.     

Mapping abeta amyloid fibril secondary structure using scanning proline mutagenesis

Although the amyloid fibrils formed from the Alzheimer's disease amyloid peptide Abeta are rich in cross-beta sheet, the peptide likely also exhibits turn and unstructured regions when it becomes incorporated into amyloid. We generated a series of single-proline replacement mutants of Abeta(1-40) and determined the thermodynamic stabilities of amyloid fibrils formed from these mutants to characterize the susceptibility of different residue positions of the Abeta sequence to proline substitution. The results suggest that the Abeta peptide, when engaged in the amyloid fibril, folds into a conformation containing three highly structured segments, consisting of contiguous sequence elements 15-21, 24-28, and 31-36, that are sensitive to proline replacement and likely to include the beta-sheet portions of the fibrils. Residues relatively insensitive to proline replacement fall into two groups: (a) residues 1-14 and 37-40 are likely to exist in relatively unstructured, flexible elements extruded from the beta-sheet-rich amyloid core; (b) residues 22, 23, 29 and 30 are likely to occupy turn positions between these three structured elements. Although destabilized, fibrils formed from Abeta(1-40) proline mutants are very similar in structure to wild-type fibrils, as indicated by hydrogen-deuterium exchange and other analysis. Interestingly, however, some proline mutations destabilize fibrils while at the same time increasing the number of amide protons protected from hydrogen exchange. This suggests that the stability of amyloid fibrils, rather than being driven exclusively by the formation of H-bonded beta-sheet, is achieved, as in globular proteins, through a balance of stabilizing and destabilizing forces. The proline scanning data are most compatible with a model for amyloid protofilament structure loosely resembling the parallel beta-helix folding motif, such that each Abeta(15-36) core region occupies a single layer of a prismatic, H-bonded stack of peptides.     

Cross-linking and amyloid formation by N- and C-terminal cysteine derivatives of human apolipoprotein C-II

We have investigated the effect of disulfide cross-linking on amyloid formation by human apolipoprotein (apo) C-II. Three derivatives of apoC-II were generated by inserting a cysteine residue on either the N-terminus (C(N)-apoC-II), C-terminus (C(C)-apoC-II), or both termini (C(N)C(C)-apoC-II). Under reducing conditions, all derivatives formed amyloid with a fibrous ribbon morphology similar to that of wild-type apoC-II. Under oxidizing conditions, C(N)- and C(N)C(C)-apoC-II formed a highly tangled network of fibrils, suggesting that the addition of an N-terminal cysteine to apoC-II promotes interfibril disulfide cross-links. Fibrils formed by C(C)-apoC-II under oxidizing conditions were closely packed but less tangled than fibrils formed by the C(N) and C(N)C(C) derivatives. The frequency of closed ring structures was more than doubled for C(C)-apoC-II compared to wild-type apoC-II. The kinetics of fibril formation by all cysteine derivatives was markedly enhanced under oxidizing conditions, suggesting that disulfide cross-linking promotes amyloid formation. Substoichiometric levels of preformed C(N)- and C(C)-apoC-II dimers accelerate amyloid formation by wild-type apoC-II. These data suggest that the N- and C-termini of apoC-II are close together in the amyloid fibril such that covalent cross-linking of either the N or C end of apoC-II promotes nucleation and the "seeding" of fibril growth.     

Pathway modulation, circular permutation and rapid RNA folding under kinetic control

The thermodynamics and folding kinetics of a circularly permuted construct of the ribozyme from Bacillus subtilis RNase P are analyzed and compared with the folding properties of the wild-type ribozyme using optical spectroscopy and catalytic activity. The folding of the wild-type ribozyme is slow due to the rearrangement of kinetically trapped species containing misfolded structures. To test whether any misfolded structure arises from interactions between the two independently folding domains of the RNase P RNA, a circular permuted form was created where one of the two phosphodiester bonds connecting these domains is broken. This construct folds approximately 15-fold faster (t1/2 approximately nine seconds) than the wild-type ribozyme at 37 degreesC. While the complete folding of both domains is kinetically indistinguishable in the wild-type ribozyme, one domain folds much faster than the other domain in the circularly permuted construct. Hence, the major kinetic trap in the folding of the wild-type RNase P RNA involves interdomain interactions. This kinetic trap is avoidable at 37 degreesC in the circularly permuted RNA. However, at temperatures below 30 degreesC or when refolding begins from an equilibrium intermediate stabilized by submillimolar concentrations of Mg2+, a subpopulation containing an interdomain misfold still forms. These results indicate that the folding pathway of this large RNA is highly malleable and can be under kinetic control.     

Circular permutation in the Ω-loop of TEM-1 β-lactamase results in improved activity and altered substrate specificity

Generating diverse protein libraries that contain improved variants at a sufficiently high frequency is critical for improving the properties of proteins using directed evolution. Many studies have illustrated how random mutagenesis, cassette mutagenesis, DNA shuffling and similar approaches are effective diversity generating methods for directed evolution. Very few studies have explored random circular permutation, the intramolecular relocation of the N- and C-termini of a protein, as a diversity-generating step for directed evolution. We subjected a library of random circular permutations of TEM-1 β-lactamase to selections on increasing concentrations of a variety of β-lactam antibiotics including cefotaxime. We identified two circularly permuted variants that conferred elevated resistance to cefotaxime but decreased resistance to other antibiotics. These variants were circularly permuted in the Ω-loop proximal to the active site. Remarkably, one variant was circularly permuted such that the key catalytic residue Glu166 was located at the N-terminus of the mature protein.     

Identification of the core structure of lysozyme amyloid fibrils by proteolysis

Human lysozyme variants form amyloid fibrils in individuals suffering from a familial non-neuropathic systemic amyloidosis. In vitro, wild-type human and hen lysozyme, and the amyloidogenic mutants can be induced to form amyloid fibrils when incubated under appropriate conditions. In this study, fibrils of wild-type human lysozyme formed at low pH have been analyzed by a combination of limited proteolysis and Fourier-transform infrared (FTIR) spectroscopy, in order to map conformational features of the 130 residue chain of lysozyme when embedded in the amyloid aggregates. After digestion with pepsin at low pH, the lysozyme fibrils were found to be composed primarily of N and C-terminally truncated protein species encompassing residues 26-123 and 32-108, although a significant minority of molecules was found to be completely resistant to proteolysis under these conditions. FTIR spectra provide evidence that lysozyme fibrils contain extensive beta-sheet structure and a substantial element of non beta-sheet or random structure that is reduced significantly in the fibrils after digestion. The sequence 32-108 includes the beta-sheet and helix C of the native protein, previously found to be prone to unfold locally in human lysozyme and its pathogenic variants. Moreover, this core structure of the lysozyme fibrils encompasses the highly aggregation-prone region of the sequence recently identified in hen lysozyme. The present proteolytic data indicate that the region of the lysozyme molecule that unfolds and aggregates most readily corresponds to the most highly protease-resistant and thus highly structured region of the majority of mature amyloid fibrils. Overall, the data show that amyloid formation does not require the participation of the entire lysozyme chain. The majority of amyloid fibrils formed from lysozyme under the conditions used here contain a core structure involving some 50% of the polypeptide chain that is flanked by proteolytically accessible N and C-terminal regions.     

Design and initial characterization of a circular permuted variant of the potent HIV-inactivating protein cyanovirin-N.

A circular permuted variant of the potent human immunodeficiency virus (HIV)-inactivating protein cyanovirin-N (CV-N) was constructed. New N- and C-termini were introduced into an exposed helical loop, and the original termini were linked using residues of the original loop. Since the three-dimensional structure of wild-type cyanovirin-N is a pseudodimer, the mutant essentially exhibits a swap between the two pseudo-symmetrically related halves. The expressed protein, which accumulates in the insoluble fraction, was purified, and conditions for in vitro refolding were established. During refolding, a transient dimeric species is also formed that converts to a monomer. Similar to the wild-type CV-N, the monomeric circular permuted protein exhibits reversible thermal unfolding and urea denaturation. The mutant is moderately less stable than the wild-type protein, but it displays significantly reduced anti-HIV activity. Using nuclear magnetic resonance spectroscopy, we demonstrate that this circular permuted monomeric molecule adopts the same fold as the wild-type protein. Characterization of these two architecturally very similar molecules allows us to embark, for the first time, on a structure guided focused mutational study, aimed at delineating crucial features for the extraordinary difference in the activity of these molecules.     

Domain interactions direct misfolding and amyloid formation of yeast phosphoglycerate kinase

There are proteins that are built of two structural domains and are deposited full-length in amyloid plaques formed in various diseases. In spite of the known differences in the mechanisms of folding of single- and multidomain proteins, no published studies can be found that address the role of the domain-domain interactions during misfolding and amyloid formation. By the discovery of the role of domain-domain interactions, here we provide important insight in the submolecular mechanism of amyloid formation. A model system based on yeast phosphoglycerate kinase was designed. This system includes the wild-type yeast phosphoglycerate kinase and single-tryptophan mutants of the individual N and C terminal domains and the complete protein. Electron microscopic measurements proved that amyloid fibrils grow from all mutants under identical conditions as for the wild-type protein. Misfolding and amyloid formation was followed in stopped-flow and manual mixing experiments on the 1 ms to 4 days timescale. Tryptophan fluorescence was used for selective detection of conformational changes accompanying the formation of the amyloidogenic intermediates and the growth of amyloid fibrils. The interactions between the polypeptide chains of the two domains direct the misfolding process from the early steps to the amyloid formation, and influence the final structure. The kinetics of misfolding is different for the individual domains, pointing to the significance of the amino acid sequence. Misfolding of the domains within the complete protein is synchronized indicating that domain-domain interactions direct the misfolding and amyloid formation mechanism.     

Alteration of the disulfide-coupled folding pathway of BPTI by circular permutation

The kinetics of disulfide-coupled folding and unfolding of four circularly permuted forms of bovine pancreatic trypsin inhibitor (BPTI) were studied and compared with previously published results for both wild-type BPTI and a cyclized form. Each of the permuted proteins was found to be less stable than either the wild-type or circular proteins, by 3-8 kcal/mole. These stability differences were used to estimate effective concentrations of the chain termini in the native proteins, which were 1 mM for the wild-type protein and 2.5 to 4000 M for the permuted forms. The circular permutations increased the rates of unfolding and caused a variety of effects on the kinetics of refolding. For two of the proteins, the rates of a direct disulfide-formation pathway were dramatically increased, making this process as fast or faster than the competing disulfide rearrangement mechanism that predominates in the folding of the wild-type protein. These two permutations break the covalent connectivity among the beta-strands of the native protein, and removal of these constraints appears to facilitate direct formation and reduction of nearby disulfides that are buried in the folded structure. The effects on folding kinetics and mechanism do not appear to be correlated with relative contact order, a measure of overall topological complexity. These observations are consistent with the results of other recent experimental and computational studies suggesting that circular permutation may generally influence folding mechanisms by favoring or disfavoring specific interactions that promote alternative pathways, rather than through effects on the overall topology of the native protein.     

CLAC binds to aggregated Abeta and Abeta fragments, and attenuates fibril elongation

Deposition of amyloid beta-peptide (Abeta) into amyloid plaques is one of the invariant neuropathological features of Alzheimer's disease. Proteins that codeposit with Abeta are potentially important for the pathogenesis, and a recently discovered plaque-associated protein is the collagenous Alzheimer amyloid plaque component (CLAC). In this study, we investigated the molecular interactions between Abeta aggregates and CLAC using surface plasmon resonance spectroscopy and a solid-phase binding immunoassay. We found that CLAC binds to Abeta with high affinity, that the central region of Abeta is necessary and sufficient for CLAC interaction, and that the aggregation state of Abeta as well as the presence of negatively charged residues is important. We also show that this binding results in a reduced rate of fibril elongation. Taken together, we suggest that CLAC becomes involved at an intermediate stage in the pathogenesis by binding to Abeta fibrils, including fibrils formed from peptides with truncated N- or C-termini, and thereby slows their growth.     

Improving a circularly permuted TEM-1 beta-lactamase by directed evolution

Circular permutation of proteins is a powerful technique to explore the importance of the polypeptide secondary structure order for attaining the final three-dimensional structure. Here, we designed a circular permutation of the TEM beta-lactamase in order to produce a new domain-forming amino acid arrangement in the polypeptide sequence. Closing the normal N- and C-termini with the connecting peptide GGS and creating new N- and C-termini at position 216, produces a severely impaired permuted protein. Introduction of a connector with random components allows the isolation of enzymes with better activities and indicates a selection for a potential helix-stop signal at the new super-secondary motif. We applied several directed-evolution cycles, starting from permuted enzymes with each of the two different connecting peptides, and selecting for antibiotic resistance and isolated several mutants with resistance levels close to those of the wild-type enzyme. We also analyze some of the data collected on the outcomes and paths of these evolutionary experiments. A purified sixth cycle variant with connector peptide GGS showed catalytic efficiency values approximately 8% of the natural enzyme.     

An intersheet packing interaction in A beta fibrils mapped by disulfide cross-linking

Most models for the central cross-beta folding unit in amyloid fibrils of the Alzheimer's plaque protein Abeta align the peptides in register in H-bonded, parallel beta-sheet structure. Some models require the Abeta peptide to undergo a chain reversal when folding into the amyloid core, while other models feature very long extended chains, or zigzag chains, traversing the protofilament. In this paper we introduce the use of disulfide bond cross-linking to probe the fold within the core and the packing interactions between beta-sheets. In one approach, amyloid fibrils grown under reducing conditions from each of three double cysteine mutants (17/34, 17/35, and 17/36) of the Abeta(1-40) sequence were subjected to oxidizing conditions. Of these three mutants, only the Leu17Cys/Leu34Cys peptide could be cross-linked efficiently while resident in fibrils. In another approach, double Cys mutants were cross-linked as monomers before aggregation, and the resulting fibrils were assessed for stability, antibody binding, dye binding, and cross-seeding efficiency. Here too, fibrils from the 17/34 double Cys mutant most closely resemble wild-type Abeta(1-40) fibrils. These data support models of the Abeta fibril in which the Leu17 and Leu34 side chains of the same peptide pack against each other at the beta-sheet interface within the amyloid core. Related cross-linking strategies may reveal longer range spatial relationships. The ability of the cross-linked 17/35 double Cys mutant Abeta to also make amyloid fibrils illustrates a remarkable plasticity of the amyloid structure and suggests a structural mechanism for the generation of conformational variants of amyloid.     

The effects of aggregation-inducing motifs on amyloid formation of model proteins related to neurodegenerative diseases

To examine the effects of aggregation-inducing motifs related to neurodegenerative diseases on amyloid formation of host protein, we prepared several chimera myoglobins, in which various aggregation-inducing motifs were inserted. The focused aggregation-inducing motifs included five (R5) or two (R2) oligopeptide repeats in yeast Sup35p, five octapeptide repeats (OPR) in the human prion protein, a nonamyloid beta component (NAC) in alpha-synuclein, and tandem repeats of 50 glutamines (Q50). Circular dichroism and infrared spectroscopies suggested that the OPR, R5, and Q50 motifs formed an antiparallel beta sheet as well as a random coil, whereas the R2 and NAC motifs mainly formed random coils. The OPR, R5, and Q50 mutants, but not the R2 and NAC mutants, readily formed the SDS-resistant aggregates under physiological condition, and electron microscopy revealed that the aggregates contained amyloid fibrils. The destabilization and increase in gyration radius of the OPR, R5, and Q50 mutants correlated with the tendency to form amyloid fibrils. A control mutant bearing a nonamyloidgenic sequence was also moderately destabilized but did not form amyloid fibrils. Therefore, we concluded that the OPR, R5, and Q50 motifs, even in a quite stable protein such as myoglobin, led the host protein to formation of amyloid fibrils under physiological condition.     

Are turns required for the folding of ribonuclease T1?

Ribonuclease T1 (RNase T1) is a small, globular protein of 104 amino acids for which extensive thermodynamic and structural information is known. To assess the specific influence of variations in amino acid sequence on the mechanism for protein folding, circularly permuted variants of RNase T1 were constructed and characterized in terms of catalytic activity and thermodynamic stability. The disulfide bond connecting Cys-2 and Cys-10 was removed by mutation of these residues to alanine (C2, 10A) to avoid potential steric problems imposed by the circular permutations. The original amino-terminus and carboxyl-terminus of the mutant (C2, 10A) were subsequently joined with a tripeptide linker to accommodate a reverse turn and new termini were introduced throughout the primary sequence in regions of solvent-exposed loops at Ser-35 (cp35S1), Asp-49 (cp49D1), Gly-70 (cp70G1), and Ser-96 (cp96S1). These circularly permuted RNase T1 mutants retained 35-100% of the original catalytic activity for the hydrolysis of guanylyl(3'-->5')cytidine, suggesting that the overall tertiary fold of these mutants is very similar to that of wild-type protein. Chemical denaturation curves indicated thermodynamic stabilities at pH 5.0 of 5.7, 2.9, 2.6, and 4.6 kcal/mol for cp35S1, cp49D1, cp70G1, and cp96S1, respectively, compared to a value of 10.1 kcal/mol for wild-type RNase T1 and 6.4 kcal/mol for (C2, 10A) T1. A fifth set of circularly permuted variants was attempted with new termini positioned in a tight beta-turn between Glu-82 and Gln-85. New termini were inserted at Asn-83 (cp83N1), Asn-84 (cp84N1), and Gln-85 (cp85Q1). No detectable amount of protein was ever produced for any of the mutations in this region, suggesting that this turn may be critical for the proper folding and/or thermodynamic stability of RNase T1.     

N- and C-terminal hydrophobic patches are involved in fibrillation of glucagon

Recent work suggests that the molecular structure of amyloid-like fibrils is determined by environmental conditions as well as amino acid sequence. To probe the involvement of side chains in fibrillation of the 29-residue hormone glucagon, we have measured fibrillation kinetics of 15 alanine mutants. At acidic pH, all of the mutants are able to form fibrils. However, substitution of hydrophobic residues in the N- and C-termini (in particular Phe6, Tyr10, Val23, and Met27) decelerates fibrillation dramatically. This indicates that the hydrophobicity and/or high beta-sheet propensity of these residues may be important for fibrillation. In contrast, substitution of Leu14 increases fibrillation propensity compared to that of the wild type. Nevertheless, despite identical fibrillation conditions, the thioflavin T and tryptophan fluorescence spectra of fibrils formed by mutants Tyr13, Leu14, and Asp15 are significantly different from those of other mutants, indicating that substitution of these residues may influence not only the fibrillation kinetics and fibril stability but also the preferred final structure of the fibrils that is formed, in line with the general structural polymorphism of glucagon fibrils. In contrast, under alkaline conditions, only a handful of the alanine mutants are capable of forming fibrils, suggesting that more side chains are involved in stabilizing interactions here. In addition, fibrils formed by wild-type glucagon at alkaline pH appear very stable, compared to fibrils formed at acidic pH. This suggests that the distribution of charges determines the number of different fibrillated states available to a peptide, since these can block formation of metastable fibrillated states.     

Quantitative morphological analysis reveals ultrastructural diversity of amyloid fibrils from alpha-synuclein mutants

High resolution atomic force microscopy is a powerful tool to characterize nanoscale morphological features of protein amyloid fibrils. Comparison of fibril morphological properties between studies has been hampered by differences in analysis procedures and measurement error determination used by various authors. We describe a fibril morphology analysis method that allows for quantitative comparison of features of amyloid fibrils of any amyloidogenic protein measured by atomic force microscopy. We have used tapping mode atomic force microscopy in liquid to measure the morphology of fibrillar aggregates of human wild-type alpha-synuclein and the disease-related mutants A30P, E46K, and A53T. Analysis of the images shows that fibrillar aggregates formed by E46K alpha-synuclein have a smaller diameter (9.0 +/- 0.8 nm) and periodicity (mode at 55 nm) than fibrils of wild-type alpha-synuclein (height 10.0 +/- 1.1 nm; periodicity has a mode at 65 nm). Fibrils of A30P have smaller diameter still (8.1 +/- 1.2 nm) and show a variety of periodicities. This quantitative analysis procedure enables comparison of the results with existing models for assembly of amyloid fibrils.