CT血管成像后处理技术在肠系膜血管栓塞诊断中的应用

目的探讨CT血管成像（CT Angiography,CTA）后处理技术在肠系膜血管栓塞诊断中的应用价值。方法50例肠系膜血管栓塞患者,均行螺旋CT增强扫描,原始数据采用多平面重组（MPR）、容积成像（VR）和最大密度投影（MIP）方法进行后处理,观察其对明确诊断所起的作用。结果MPR、VR和MIP方法均能显示病变,以MPR显示率最高,结合3种方法可以获得明确诊断。结论CTA能够明确肠系膜血管栓塞的诊断,MPR进行图像后处理的价值最大。     

How reliable is the double‐ended pressure sleeve technique for assessing xylem vulnerability to cavitation in woody angiosperms?

The reliability of a double-ended pressure sleeve technique was evaluated on three woody angiosperm species with contrasting maximum vessel lengths. Vulnerability curves (VCs) were constructed by varying sample length and the size of the pressure sleeves. VCs were compared against curves obtained with reference techniques. For the two diffuse-porous species, Betula pendula and Prunus persica, VCs built with shoot segments shorter than maximum vessel length strongly overestimated species vulnerability. Furthermore, increasing the size of the pressure sleeve also tended to lead to overestimated VCs. For the ring-porous species Quercus robur, the technique strongly overestimated vulnerability to embolism, whatever the sample length or chamber tested. In conclusion, the double-ended pressure sleeve technique only gives reliable VCs on diffuse-porous angiosperms with short pressure sleeves, only when segments are longer than maximum vessel length.     

An improved sampling technique for bacterial cultures under high hydrostatic pressure

A sampling technique for bacterial cultures subjected to high hydrostatic pressure is described. A sample-receiving vessel with a motor driven interface-piston is employed. By precisely matching the pressures in the bulk culture and the sample-receiving vessel, none of the sample is subjected to the high shear forces common to other desings of high pressure sampler. The use of the technique was illustrated by the growth of an anaerobic culture at 300 bar and 75°C.     

前包埋阳离子胶体金标记技术定量检测硬脑膜毛细血管阴离子场方法的探讨

介绍一种定量观察血管内皮细胞表面阴离子场的技术方法。以研究毛细血管腔面阴离子场与血管通透性的关系。用前包埋程序以阳郭胶体金（CCG）做为探针,标记硬脑膜毛细血管内皮腔面的阴离子场,在电子显微镜下摄影计数内皮细胞表面标记的金颗粒,在硬脑膜毛细血管腔面,微绒毛和质膜小泡的表面均见CCG标记,而不带电荷的BSA－胶体金呈阴性结果,前包埋阳离子胶体金标记技术可特异性地显示硬脑膜血管内皮细胞表面的阴离子场,并可做定量研究,标记微环境,血管开口大小和复染可能影响标记结果。     

The quantitative estimation of microvessels in microvascular networks

A novel method is presented that greatly facilitates the determination of vessel segment number and density in both simple and complex microvascular networks. This approach was applied to microvascular networks represented by the Bra-Ket operator technique and accurately predicted the number of vessel segments in both tree-branched and loop-branched (arcade) networks. The method was then applied to the complex hexagonal array network described by Engelson et al. for gastrointestinal mucosa and accurately yielded an average vessel segment number of three around each hexagonal loop. This new method may be used for conveniently estimating tissue microvascular densities, such as vessel rarefaction or proliferation, and for the modelling of microvascular networks.     

Long-Term Catheterization of the Intestinal Lymph Trunk and Collection of Lymph in Neonatal Pigs

Catheterization of the intestinal lymph trunk in neonatal pigs is a technique allowing for the long-term collection of large quantities of intestinal (central) efferent lymph. Importantly, the collection of central lymph from the intestine enables researchers to study both the mechanisms and lipid constitutes associated with lipid metabolism, intestinal inflammation and cancer metastasis, as well as cells involved in immune function and immunosurveillance. A ventral mid-line surgical approach permits excellent surgical exposure to the cranial abdomen and relatively easy access to the intestinal lymph trunk vessel that lies near the pancreas and the right ventral segment of the portal vein underneath the visceral aspect of the right liver lobe. The vessel is meticulously dissected and released from the surrounding fascia and then dilated with sutures allowing for insertion and subsequent securing of the catheter into the vessel. The catheter is exteriorized and approximately 1 L/24 hr of lymph is collected over a 7 day period. While this technique enables the collection of large quantities of central lymph over an extended period of time, the success depends on careful surgical dissection, tissue handling and close attention to proper surgical technique. This is particularly important with surgeries in young animals as the lymph vessels can easily tear, potentially leading to surgical and experimental failure. The video demonstrates an excellent surgical technique for the collection of intestinal lymph.     

Flow in an arteriosclerotic blood vessel with rigid permeable wall

This paper concerns the fluid-mechanical study of the effects of permeability of the wall of an arteriosclerotic blood vessel by idealizing the tissue space as a porous medium bounding the blood vessel and the arteriosclerotic blood vessel as a constricted axisymetric tube of slowly but arbitrarily varying cross-secton. An analytical solution in the general case is obtained by perturbation technique and several important particular geometries of constriction are discussed as special cases. Numerical results for the effects of permeability on the wall shear stress and filtration velocity are shown graphically.     

Continuous Culture Used for Media Optimization

A technique is described in which continuous culture is used for the optimization of media in terms of growth-supporting ability. The technique consists of identifying growth-limiting nutrients by observing the reaction of the continuous system to injection of suspected growth-limiting nutrients into the growth vessel.     

Murine Cervical Heart Transplantation Model Using a Modified Cuff Technique

Mouse models are of special interest in research since a wide variety of monoclonal antibodies and commercially defined inbred and knockout strains are available to perform mechanistic in vivo studies. While heart transplantation models using a suture technique were first successfully developed in rats, the translation into an equally widespread used murine equivalent was never achieved due the technical complexity of the microsurgical procedure. In contrast, non-suture cuff techniques, also developed initially in rats, were successfully adapted for use in mice^1-3. This technique for revascularization involves two major steps I) everting the recipient vessel over a polyethylene cuff; II) pulling the donor vessel over the formerly everted recipient vessel and holding it in place with a circumferential tie. This ensures a continuity of the endothelial layer, short operating time and very high patency rates⁴.Using this technique for vascular anastomosis we performed more than 1,000 cervical heart transplants with an overall success rate of 95%. For arterial inflow the common carotid artery and the proximal aortic arch were anastomosed resulting in a retrograde perfusion of the transplanted heart. For venous drainage the pulmonary artery of the graft was anastomosed with the external jugular vein of the recipient⁵.Herein, we provide additional details of this technique to supplement the video.     

Tumescent and dry liposuction of lower extremities: differences in lymph vessel injury

Lipectomy is a standard procedure in plastic surgery. Until now, however, there was no definite information about the influence of different liposuction techniques (tumescent versus dry liposuction) on the integrity of lymph collectors during this procedure. To study the effect of these liposuction techniques on the incidence of lymph vessel injury, postmortem lymphatic preparations were done in nine human cadavers (18 lower extremities). Conventional liposuction with a blunt 4-mm cannula in the dry technique (n = 29 regions) was compared with the tumescent technique (n = 26). Liposuction was performed in parallel to the superficial lymph vessels (longitudinal suction) or transversally in an 80-degree to 90-degree angle to the extremity (vertical suction). Careful surgical preparation of different regions followed. A specific macroscopic lymph vessel injury score was applied to differentiate three degrees of lymph vessel lesions according to the extravasation of patent blue. In all lower extremities, postmortem lymph flow occurred as indicated by patent blue staining of the lymph vessels. Injection of fluid that is obligatory during tumescent suction did not result in grade 2 injury. On the contrary, tumescent suction overall produced significantly fewer lymph vessel lesions when compared with the dry technique (p < 0.05). Longitudinal liposuction produced significantly less injury when compared with vertical suction (p < 0.05). Tumescent suction and dry suction were equally effective in removing adipose aspirates, as verified by circumference measurements. In addition, tumescent liposuction is unlikely to cause major lesions of epifascial lymph vessels during suction procedures vertical to the extremity axis. Therefore, in this respect, this technique is superior to dry suction.     

Cell-free plasma layer in cerebral microvessels.

Two diameters of vessel and red cell column in cerebral microvessels (> 29.8 microns in diameter) of cat were measured together with red cell velocity, using a two fluorescent tracer method. A fluorescein isothiocyanate (FITC)-labeled red cell was adopted as a flow tracer to measure the cell velocity with a dual window technique. Based on the fluorescence image, the red cell column diameter was measured. Plasma was stained with rhodamine-B isothiocyanate (RITC)-labeled dextran to measure the vessel diameter. The thickness of the cell-free plasma layer could be determined from the difference of the two diameters. The obtained thickness of the cell-free layer was not described by a simple function of vessel diameter or red cell velocity; it was dependent on the pseudo shear rate defined by the ratio of cell velocity to vessel radius. The layer thickness increased with a decrease in the pseudo shear rate.     

Estimation of light intensity distribution in a culture vessel

Distribution of photosynthetic photon flux density (PPFD) in a culture vessel was estimated using a sensor film for measuring the integrated solar radiation. A plantlet model whose leaves were constructed from sensor film was used to simulate a potato plantlet. The plantlet model was put into a culture vessel and, after exposure to culture conditions for 20 days, PPFD was estimated for each individual model leaf based on the degree of fading of the sensor film. The method was able to demonstrate the light intensity distribution patterns inside a small test tube under downward lighting conditions. This technique allows for the estimation of light intensity distribution patterns inside a small culture vessel, which was previously difficult to measure by conventional methods.     

Use of a mass spectrometric method for studying the oxygen demand of suspensions of resting Bacillus anthracoides spores

Oxygen assimilation by the spore suspensions of Bacillus anthracoides under sterile conditions was continuously registered by means of a modified mass-spectrometry technique using an original reaction vessel. The sensitivity of the technique is 2.10(-2) mcl O2 per 1 mg of dry biomass per hour. The technique made it possible to determine the level of endogenous respiration activity in the spore suspensions of Bacillus anthracoides.     

TECHNIQUES FOR MEASURING VESSEL LENGTHS AND DIAMETERS IN STEMS OF WOODY PLANTS

Results were compared between the latex paint and compressed air methods for determining total vessel lengths, and between the sectioning and maceration methods for determining vessel diameters. The minimum, mean, median, and maximum vessel diameters were less with the sectioning method than with the maceration technique. Vessel diameter distributions were always nonnormal and had roughly similar patterns with the two techniques, but were statistically different from one another. In all six species where the paint and air methods for determining vessel length were compared, both methods showed a similar skewed vessel length distribution, with many short vessels and few long ones. Although there was no consistent pattern to the difference in results with these two methods, the vessel length frequency distributions were statistically different from one another. With the paint method, many vessels, especially many of the narrowest ones, were not paint-filled at the paint infusion port. The air method utilized the paint method, in part, and, in addition, is based upon the incorrect assumption that all vessels in the stem are the same diameter. Both techniques tended to exclude vessel lengths of the narrowest vessels. However, the narrow vessels, although numerous, contributed an insignificant amount to the total theoretical hydraulic conductance in stems.     

An Augmented Lagrangian Based Compressed Sensing Reconstruction for Non-Cartesian Magnetic Resonance Imaging without Gridding and Regridding at Every Iteration

Background

Non-Cartesian trajectories are used in a variety of fast imaging applications, due to the incoherent image domain artifacts they create when undersampled. While the gridding technique is commonly utilized for reconstruction, the incoherent artifacts may be further removed using compressed sensing (CS). CS reconstruction is typically done using conjugate-gradient (CG) type algorithms, which require gridding and regridding to be performed at every iteration. This leads to a large computational overhead that hinders its applicability.

Methods

We sought to develop an alternative method for CS reconstruction that only requires two gridding and one regridding operation in total, irrespective of the number of iterations. This proposed technique is evaluated on phantom images and whole-heart coronary MRI acquired using 3D radial trajectories, and compared to conventional CS reconstruction using CG algorithms in terms of quantitative vessel sharpness, vessel length, computation time, and convergence rate.

Results

Both CS reconstructions result in similar vessel length (P = 0.30) and vessel sharpness (P = 0.62). The per-iteration complexity of the proposed technique is approximately 3-fold lower than the conventional CS reconstruction (17.55 vs. 52.48 seconds in C++). Furthermore, for in-vivo datasets, the convergence rate of the proposed technique is faster (60±13 vs. 455±320 iterations) leading to a ∼23-fold reduction in reconstruction time.

Conclusions

The proposed reconstruction provides images of similar quality to the conventional CS technique in terms of removing artifacts, but at a much lower computational complexity.     

Manipulation of the culture environment on <Emphasis Type="Italic">in vitro</Emphasis> air movement and its impact on plantlets photosynthesis

Two-dimensional air current speeds in the culture vessel were measured using a tracer-based visualization technique and the effect of the air movement in the culture vessel on the photosynthesis of in vitro potato plantlets was assessed under a photoautotrophic culture condition. The air current speeds inside the vessel were varied by controlling free convection induced by spatial variations of temperatures in the culture vessel. For all conditions examined, upward air currents were observed around the plantlets in the central part of the culture vessel and downward air currents were observed near inside walls in the culture vessel. The upward and downward air currents were restricted by the presence of the plantlet. The upward air current speeds were affected by plantlet size inside the vessel and it was 24, 8 and 4 mm s⁻¹ in culture vessels with no plantlets, a 10-mm-tall plantlet and a 60-mm-tall plantlet cultured inside the vessel, respectively. The upward air current speed was increased by 2 times by increasing wind velocity above the culture vessel from 0.1 to 1.0 m s⁻¹. Placing the black plate on the medium also increased the air current speeds by 1.5 times. The net photosynthetic rates of the plantlets increased from 2.0 to 2.5 μmol m⁻² s⁻¹ as the upward air current speed in the culture vessel increased from 2.4 to 8.0 mm s⁻¹. The air current speeds in the culture vessel were significantly slow. Enhancement of the air movement in the culture vessel is important to promote photosynthesis of the in vitro plantlets.     

New method for ultrasonic Doppler probe angle determination

A new method is described to determine the Doppler probe angle using a standard pulsed Doppler; the technique is based on the determination of vessel position with respect to the skin surface. The transit times of ultrasound waves toward the vessel from multiple probe positions on the skin, the distance between probe positions, and the probe-skin angle are measured. Using the probe-skin angle and the slope of the regression curve, the vessel-skin angle is determined trigonometrically. Experimental results show high accuracy within a vessel-skin angle range of 5–40°.     

Confocal optical system: a novel noninvasive sensor to study mixing

A novel confocal optical system to study mixing time in small-scale bioreactors is presented. The system is designed to monitor fluorescence upon tracer addition from a localized confocal volume of 0.21 mL within a glass vessel. The key elements of the fluorescence-based confocal system are a pinhole, a lens, an APD (Avalanche photodiode) detector, and light filters. The optical technique was validated by comparison with a pH-based technique. Finally, the optical sensor was tested and a real cultivation media (i.e., spent mammalian cell media) was used to measure mixing time in a 12.5-mL stirred transparent vessel. High accuracy, easy results interpretation, and low costs are the three most attractive characteristics of the sensor. Because of its noninvasive nature and versatility, the results suggest that the confocal system is a promising tool to perform mixing time studies in stirred vessels.     

Vascular access for extracorporeal therapy in the rabbit

A technique allowing short-term blood access for extracorporeal therapy in rabbits is described. The technique utilizes silicone rubber cannulae and teflon vessel tips to construct an externalized carotid-jugular arteriovenous shunt. The insertion procedure takes 1 h and extracorporeal blood flows in excess of 10 ml/min are obtainable for up to 7 days. Blood flow may still be obtained following shunt clotting by insertion of smaller diameter catheters through the arterial cannula. This technique has been successfully used for extracorporeal therapy in rabbit disease models.     

Flow-tissue interaction with compliance mismatch in a model stented artery

The insertion of an endovascular prosthesis is known to have a thrombogenic effect that is also a consequence of the interaction between the flowing blood and the stented arterial segment; in fact the prosthesis induces a compliance mismatch and a possible small expansion along the vessel that eventually gives rise to an anomalous distribution of wall shear stresses. The fluid dynamics inside a rectilinear elastic vessel with compliance and section variation is studied here numerically. A recently introduced perturbative approach is employed to model the interaction between the fluid and the elastic tissue; this approximate technique is first validated by comparison with a complete solution within a simple one-dimensional model of the same system. Then it is applied to an axisymmetric model in order to evaluate the flow dynamics and the distribution of wall shear stress in the stented vessel. Compliance mismatch is shown to produce more intense negative wall shear stresses in the stented segment while rapid variations of wall shear stress are found at the stent ends. These effects are enhanced when the prosthesis is accompanied by a small increase of the vessel lumen.