Embedding Media for 1-2 Micron Sectioning. 2. Hydroxyethyl Methacrylate Combined with 2-Butoxyethanol

A hydroxyethyl methacrylate monomer medium incorporating 2-butoxyethanol requires 2 stock solutions for embedding. Solution A: 80 ml of hydroxyethyl methacrylate (Rohm and Haas Co., Philadelphia, Pa.) is mixed well with 16 ml of 2-butoxyethanol; 0.27 gm of benzoyl peroxide, the catalyst, is added and permitted to dissolve. Heating to 40-50 C may be used to accelerate its solution. Solution B: polyethylene glycol 200 or 400, 15 parts, and N,N-dimethylaniline, 1 part, are mixed thoroughly. Tissues are dehydrated in the customary manner to absolute ethanol or other comparable dehydrant, infiltrated completely with A, then cast in a mixture consisting of 42 parts of A well mixed with 1 part of B. Polymerizaion occurs in 4-7 hr. In a water bath at 20 C the time required was about 7 hr; at 28 C, 4 hr. This medium is based on the author's water-polyethylene glycol-hydroxyethyl methacrylate monomer medium (Stain Techn., 42: 119-23, 1967).     

Staining Pericellular Boutons of Glutaraldehyde-Fixed Nervous Tissue; A Chromation-Silvering Sequence for Frozen Sections

After fixing in phosphate-buffered 5% glutaraldehyde, pH 6.8, by perfusion, brains were sliced to 3-5 mm pieces which were placed in the fixative for 5-7 days. The pieces were washed through several changes of 2.26% NaH₂PO₄ for 12 hr, 30 μ frozen sections cut, and mordanted 2 days in an equal-parts mixture of 3.5% CrO₃ and 5% Na-tartrate, which had been aged at 20-25 C for 20 days prior to use. After washing in distilled water, the sections were put into a solution containing AgNO₃, 20 gm; and KNO₃, 15 gm, in distilled water, 80 ml; at 30 C for 1.5-2 hr, then reduced at 40-45 C in three pyrogallol solutions as follows: 1-2 sec in 1% pyrogallol in 55% alcohol; 3-4 sec in a 0.67% solution in 33% alcohol, and 5-7 sec in a 0.5% solution in 25% alcohol. Gold toning is optional; dehydration, clearing and covering, routine. The technic shows particularly the perisomatic fibers, boutons en passant and boutons termineaux. Fibers in nerve tracts may be visible but lightly stained; cell nuclei may be dark, but the cytoplasm remains pale.     

Hydroxyethyl Methacrylate Combined with Polyethylene Glycol 400 and Water; an Embedding Medium for Routine 1-2 Micron Sectioning

Pieces of tissue, with the largest dimension not exceeding 7 mm, are fixed and dehydrated by the procedures of choice. Two stock solutions: A, for infiltration; and B, the accelerator, are used in embedding. Formulas: A, 80 ml of glycol methacrylate (2-hydroxyethyl methacrylate—Rohm and Haas Co., Philadelphia, Pa.) is mixed well with 12 ml of polyethylene glycol (Carbowax) 400 and 8 ml of water; then 0.27 gm of benzoyl peroxide added, heated to dissolve the peroxide, and allowed to cool to room temperature. B, polyethylene 200 or 400, 15 parts, and N,N-dimethylaniline, 1 part, mixed thoroughly. Tissues are first infiltrated completely with solution A, then cast in a mixture consisting of 42 parts of A mixed with 1 part of B. Polymerization occurs in 45 min to 3 hr, depending on the temperature. In a water bath at 20 C, the time required was found to be about 3 hr; at 25 C, 1.5 hr; and at 30 C, 45 min. The plastic block can be trimmed easily, and sections 1-2 μ thick readily cut. Sections can be attached to slides by water flotation, without adhesive, and should be dried at room temperature. Staining with aqueous solutions of basic and acid dyes, without removing the embedding matrix, is sharp and brilliant. When staining of the matrix by basic dyes occurs, this background stain can be completely removed by differentiating in either 2-butoxyethanol, pure ethanol, or a mixture of the two. A number of histochemical reagents have been found compatible with this embedding procedure.     

A Modified Pyridine-Silver Stain for Teased Preparations of Motor and Sensory Nerve Endings in Skeletal Muscle

This technique has been developed especially to stain sensory receptors which have been localised intramuscularly by electrophysiological means. Rat intertransverse caudal muscles, removed immediately after death, are fixed for 24 hr in a freshly prepared mixture of absolute ethyl alcohol, 4.5 ml; distilled water, 5 ml; and concentrated HNO_a, 0.1 ml. After a further 24 hr in 10 ml of absolute ethyl alcohol containing 0.1 ml of ammonia solution (sp. gr. 0.88), the muscles are washed in distilled water for 30 min and placed in full strength pyridine for 2 days. They are then washed for 24 hr in distilled water (changed 5-8 times) and left in 2% AgNO₃, in the dark for 3 days at 25 C. Following reduction in 10 ml of 5% formic acid containing 0.4 gm of pyrogallol for 6-24 hr, the specimens are washed briefly in distilled water and stored in pure glycerol. The nerve endings can then be teased out and mounted in glycerol, under cover glasses ringed with a waterproof cement. The advantage of this method is that it gives consistently good staining of receptors and motor end-plates in small muscles of the rat     

A Copper Sulfate-Silver Nitrate Method for Nerve Fibers of Planarians

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

A Sensitive Myelin-Sheath Stain Particularly Useful for Small Mammals and Neonatal Cats

Staining of myelinated fibers including the delicate myelin sheaths of infantile animals is as follows: perfuse the anesthetized animal with a pH 7.4 posphate-buffered fixative, either 10% formalin, 6% gluteraldehyde or a mixture containing 3% gluteraldehyde and 2% acrolein. Dissect out the brain or spinal cord and continue fixation for at least 24 hr. Cut larger brains to 1 cm in at least one dimension. Wash in running tap water 2-3 hr and soak in 2.5% potassium dichromate in 1% acetic acid (the primary mordant) for 3-5 days in darkness. Wash at least 12 hr in running tap water. Dehydrate and embed in celloidin and store in 80% ethanol. Section at 25-60 μ into 80% ethanol. Wash 1-2 min in distilled water and then immerse in 1-2% ferric alum at 50 C for at least 1 hr (the secondary mordant). Wash in tap water and stain at least 1 hr at 50-60 C in 0.5% unripened hematoxylin in 1% acetic acid. Wash well in tap water and differentiate in a mixture containing 0.5% ferrityanide, 0.5% borax and 0.5% Na₂CO₃; 2 changes. Wash well in distilled water, then in tap water, and dehydrate, clear and mount. Myelin stains black, cell bodies stain tan, and the background is pale yellow. With minor modifications in timing, the method is applicable to frozen and to paraffin sections; the primary mordant being omitted in the freezing technique.     

Stains recently certified

For staining in toto, planarians are fixed in a mixture of 10 ml of commercial formalin, 45 ml of 95% ethanol and 2 ml of glacial acetic acid. After treatment with 70% ethanol 3-10 days, they are washed in distilled water and immersed in 10% CuSO₄. 5H₂O for 3 hr at 50° C, transferred without washing to 1% AgNO₃ for 1.0-1.5 hr at 50° C; and then developed in: 10 ml of 1% pyrogallol, 100 ml of 56% ethanol and 1 ml of 0.2% nitric acid. Gold toning, 5% Na₂S₂O₃ and dehydration follow as usual. For staining sections, material is fixed in the same fixative, embedded in paraffin and sectioned at 10 μ. After bringing sections to water, they are immersed in 20% CuSO₄. 5H₂O for 48 hr at 37° C; then rinsed briefly in distilled water and placed in 7% AgNO₃ for 24 hr at 37° C. They are washed briefly in distilled water and reduced in: hydroquincne, 1 gm; Na₂SO₃, 5 gm and distilled water 100 ml. Gold toning, followed by 5% Na₂S₂O₃ and dehydration completes the process. Any counterstaining may follow.     

Differentiated Staining of Osmium Tetroxide-Fixed, Vestopal-w-Embedded Tissue in thin Sections

Tissues were fixed at 20° C for 1 hr in 1% OsO₄, buffered at pH 7.4 with veronal-acetate (Palade's fixative), soaked 5 min in the same buffer without OsO₄, then dehydrated in buffer-acetone mixtures of 30, 50, 75 and 90% acetone content, and finally in anhydrous acetone. Infiltration was accomplished through Vestopal-W-acetone mixtures of 1:3, 1:1, 3:1 to undiluted Vestopal. After polymerisation at 60° C for 24 hr, 1-2 μ sections were cut, dried on slides without adhesive, and stained by any of the following methods. (1) Mayer's acid hemalum: Flood the slides with the staining solution and allow to stand at 20°C for 2-3 hr while the water of the solution evaporates; wash in distilled water, 2 min; differentiate in 1% HCl; rinse 1-2 sec in 10% NH,OH. (2) Iron-trioxyhematein (of Hansen): Apply the staining solution as in method 1; wash 3-5 min in 5% acetic acid; restain for 1-12 hr by flooding with a mixture consisting of staining solution, 2 parts, and 1 part of a 1:1 mixture of 2% acetic acid and 2% H₂SO₄ (observe under microscope for staining intensity); wash 2 min in distilled water and 1 hr in tap water. (3) Iron-hematoxylin (Heidenhain): Mordant 6 hr in 2.5% iron-alum solution; wash 1 min in distilled water; stain in 1% or 0.5% ripened hematoxylin for 3-12 br; differentiate 8 min in 2.5%, and 15 min in 1% iron-alum solution; wash 1 hr in tap water. (4) Aceto-carmine (Schneider): Stain 12-24 hr; wash 0.5-1.0 min in distilled water. (5) Picrofuchsin: Stain 24-48 hr in 1% acid fuchsin dissolved in saturated aqueous picric acid; differentiate for only 1-2 sec in 96% ethanol. (6) Modified Giemsa: Mix 640 ml of a solution of 9.08 gm KH₂PO₄ in 1000 ml of distilled water and 360 ml of a solution of 11.88 gm Na₂HPO₄-2H₂O in 1000 ml of distilled water. Soak sections in this buffer, 12 hr. Dissolve 1.0 gm of azur I in 125 ml of boiling distilled water; add 0.5 gm of methylene blue; filter and add hot distilled water until a volume of 250 ml is reached (solution “AM”). Dissolve 1.5 gm of eosin, yellowish, in 250 ml of hot distilled water; filter (solution “E”). Mix 1.5 ml of “AM” in 100 ml of buffer with 3 ml of “E” in 100 ml of buffer. Stain 12-24 hr. Differentiate 3 sec in 25 ml methyl benzoate in 75 ml dioxane; 3 sec in 35 ml methyl benzoate in 65 ml acetone; 3 sec in 30 ml acetone in 70 ml methyl benzoate; and 3 sec in 5 ml acetone in 95 ml methyl benzoate. Dehydrated sections may be covered in a neutral synthetic resin (Caedax was used).     

Toluidine Blue-Alizarin Red S Staining of Cartilage and Bone in Whole-Mount Skeletons in Vitro

Cartilage and bone of the developing skeleton can be reliably differentiated in whole-mount preparations with toluidine blue-alizarin red S staining after FAA fixation. The recommended staining procedure is based chiefly on the use of newborn white and Swiss-Webster mice, 4-9 days postnatal, but was tested also on mice and rats 3-8 wk of age. Procedure: Sacrifice, skin, eviscerate, remove body fat, and place specimens in FAA (formalin, 1; acetic acid, 1; 70% alcohol, 8) for approximately 40 min. Stain in 0.06% toluidine blue made in 70% ethyl alcohol for 48 hr at room temperature. Use 20 volumes of stain solution to the estimated volume of the specimen. Destain soft tissues in 35% ethyl alcohol, 20 hr; 50%, 28 hr; and 70%, 8 hr. Counterstain in a freshly prepared 1% aqueous solution of KOH to which is added 2-3 drops of 0.1% alizarin red S per 100 ml of solution. Each day for 3 days, transfer the specimen to a fresh 1% KOH-alizarin mixture, or until the bones have reached the desired intensity of red and soft tissues have cleared. Rinse in water, and place in a 1:1 mixture of glycerol and ethyl alcohol for 1-2 hr, then transfer the specimen to fresh glycerol-alcohol for final clearing and storage. Older mice and rats require procedural modifications: (1) fixation for 2 hr, (2) 0.12% toluidine blue, (3) maceration for 4 days in 3% KOH-alizarin, and (4) preliminary clearing for 24 hr in a mixture of glycerol, 2; 70% ethyl alcohol, 2; and benzyl alcohol, 1 (v/v) before placing in a 1:1 alcohol-glycerol mixture.     

Silver Protein Staining of Nerve Fibers in Celloidin Sections

Celloidin sections from formalin-fixed brain and spinal cord of primates are stored in 70% alcohol after cutting, soaked in 2% pyridine in 50% alcohol for 6-8 hr at 37 C, and transferred to 1% concentrated NH₄OH in 50% alcohol 15-18 hr at 20-25 C. After washing and flattening, the sections are transferred to 1% silver protein solution containing 30 ml of 0.2 M H₃BO₃/100 ml. Impregnation is accomplished in 50 ml screw-top jars, 50 mm in diameter, which are filled to a depth of 35 mm, and have 1 gm of copper foil, 0.002 inch thick added. The foil is folded in loose accordion-fashion, pierced and threaded, cleaned in 5% HNO₃, rinsed in distilled water, and suspended in the solution just above the sections by fastening the thread to the jar lid. The sections are impregnated for 24 hr at 37 C, rinsed in distilled water, reduced in a solution of 5% Na₂SO₃ and 1% hydroquinone for 10 min, washed in distilled water and toned in 0.2% gold chloride for 5 min. After rinsing in distilled water, the sections are transferred to 1% oxalic acid for 45-60 sec, washed in distilled water and placed in 5% Na₂S₂O₃ for 5 min. Sections are then washed, dehydrated to 95% alcohol, cleared in terpineol, followed by 3 changes in xylene, and mounted.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

A Chlorate-Formaldehyde Modification of the Golgi Method

Pieces of fresh nervous tissue 3-5 mm thick are put into a mixture of: 6% K₂Cr₂O₇, 40 ml; 5% KClO₃, 20 ml; 20% chloral hydrate, 30 ml; and concentrated formalin (38% HCHO), 10 ml; allowed to fix 3 days, with a daily change of fluid; transferred to 3% K₂Cr₂O₇ for 3 days, with twice daily changes; then to 1% AgNO₃ for 3 days at 20-25° C. Frozen sections are cut, dehydrated, cleared and mounted in Permount with a cover glass. The method gives good results for microglia and oligodendroglia in addition to the usual staining of nerve cells and their processes.     

A method for staining pollen tubes in pistil

A quadruple staining procedure has been developed for staining pollen tubes in pistil. The staining mixture is made by adding the following in the order given: lactic acid, 80 ml; 1% aqueous malachite green, 4 ml; 1% aqueous acid fuchsin, 6 ml; 1% aqueous aniline blue, 4 ml; 1% orange G in 50% alcohol, 2 ml; and chloral hydrate, 5 g. Pistils are fixed for 6 hr in modified Carnoy's fluid (absolute alcohol:chloroform:glacial acetic acid 6:4:1), hydrated in descending alcohols, transferred to stain and held there for 24 hr at 45 +/- 2 C. They were then transferred to a clearing and softening fluid containing 78 ml lactic acid, 10 g phenol, 10 g chloral hydrate and 2 ml 1% orange G. The pistils were held there for 24 hr at 45 +/- 2 C, hydrolyzed in the clearing and softening fluid at 58 +/- 1 C for 30 min, then stored in lactic acid for later use or immediately mounted in a drop of medium containing equal parts of lactic acid and glycerol for examination. Pollen tubes are stained dark blue to bluish red and stylar tissue light green to light greenish blue. This stain permits pollen tubes to be traced even up to their entry into the micropyle.     

Enhanced Reliability in Silver Impregnation of Terminal Axonal Degeneration-Original Nauta Method

Brains of rat with surgical lesions 3-5 days old are fixed in 10% neutralized formalin (excess of CaCO₃), 20 μ serial frozen sections cut therefrom and kept in neutralized formalin for an additional 24-48 hr. The sections are soaked in distilled water 12-24 hr, transferred to 50% alcohol containing 0.75 ml of concentrated NH₄OH (sp. gr. 0.91) per 100 ml 12-24 hr, placed in distilled water 2-3 hr and then in silver-pyridine solution (AgNO₃ 3% aq., 20 ml; pyridine, 1 ml) for 48 hr. Test sections are transferred directly to each one of 3 ammoniated silver-solutions, pH 12.8, 13.0 and 13.2, made as follows: To 200 ml of solution 1 (silver nitrate, 6.4 gm; alcohol 96%, 220 ml; NH₄OH (sp. gr. 0.91), 28 ml and distilled water, 440 ml) is added respectively 8-12 ml, 12-16 ml and 16-20 ml of solution 2 (2% NaOH) to give the pH desired. The test sections are studied and the optimal ammoniated silver solution chosen. Two baths of ammoniated silver are used, the section placed with continuous agitation into the first bath for 30 sec and the second bath for 60 sec. The sections are then transferred directly into a reducing bath (formalin 10%, 2ml; alcohol 96%, 5 ml; citric acid 1%, 1.5 ml and distilled water, 4.5 ml) for 2 min and from there to 5% Na₂S₂O₃ for 1 min, rinsed in 3 changes of distilled water, dehydrated and mounted.     

A Modified Bradley's Squash Technique for Studying Embryo Sacs in Gramineae

This procedure is especially suited for studying the embroyology of sexual and apomictic grasses. Material is fixed in a 2:2:1 alcohol-chloroform-propionic acid mixture for a minimum period of 2 days, soaked in 4% iron alum at 75 C for 7 min, and 2 min each in 2 changes of distilled water, also at 75 C. After 2-3 min in cold water, it is macerated in 50% HCI for 10 min at about 22-25 C, washed and mordanted for 12-16 hr in 50% alcohol saturated with ferric acetate. Ovules are then dissected out and squashed in 1% carmine in 45% propionic acid. Squashing should be firm enough to separate and flatten the embryo sacs but not to burst them. The slides are set aside for 12-24 hr for intensification of the stain.     

Thermal Resistance of Pseudomonas fragi in Milk Containing Various Amounts of Fat

Similar populations of Pseudomonas fragi were grown at 25 C for 20 hr or at 7 C for 7 days in milk containing 0, 10, and 20% fat; they were then heated at 48, 50, and 52 C in milk containing 0, 10, and 20% fat. After inoculation, the heating medium contained 2.1 x 10(6) to 6.9 x 10(6) organisms per milliliter. The P. fragi cells grown in skim milk had greater thermal resistance (D(52) = 3.0 to 3.1) than those grown in milk containing fat (D(52) = 1.9 to 2.5). The organisms grown at 7 C for 7 days in milk containing 10% fat were more resistant (D(52) = 3.0) than those grown in the same medium at 25 C for 20 hr (D(52) = 2.0). The presence of 0 to 20% milk fat in the heating medium had no apparent effect on the thermal resistance.     

Staining Mitochondria With Hematoxylin After Formalin-Sublimate Fixation; A Rapid Method

Mitochondria were stained in liver, kidney, pancreas, adrenal and intestinal mucosa of rat and mouse. Tissues 1 mm thick, were fixed in a mixture of saturated aqueous HgCl₂, 90 ml; formalin (37-38% HCHO), 10 ml, at room temperature (25°C) for 1 hr. Deparaffinized sections 3-4μ thick were treated with Lugol's iodine (U.S.P.) followed by Na₂S₂O₃ (5%), rinsed in water and the ribonucleic acid removed by any of the following procedures: 0.2 M McIlavaine's buffer, pH 7.0, 2 hr, or 0.2 M phosphate buffer, pH 7.0, 2 hr at 37°C; 0.1% aqueous ribonuclease, 2 hr at 37°C; 5% aqueous trichloracetic acid overnight at 37°C; or 1% KOH at room temperature for 1 hr. After washing in water, sections were treated with a saturated solution of ferric ammonium alum at 37°C for 8-12 hr and colored by Regaud's ripened hematoxylin for 18 hr. They were then differentiated in 1% ferric ammonium alum solution while under microscopic observation.     

Factors affecting the production of prednisolone by immobilization of Bacillus pumilus E601 cells in poly(vinyl alcohol) cryogels produced by radiation polymerization

To increase the yield percent of prednisolone from hydrocortisone (cortisol), Bacillus pumilus E601 (a radioresistant microorganism) was incorporated into poly(vinyl alcohol) (PVA) cryogel grafted with hydroxyethyl-methacrylate (HEMA) as a crosslinking agent. The polymer was prepared by a radiation polymerization technique at 20 kGy from Co-60 source. The optimum temperature for the biotransformation of hydrocortisone by free cells, poly(PVA)/HEMA, and poly(PVA)/HEMA /N-isopropylacrylamide (N-IPAAm) was 30 °C. The highest yield % of prednisolone was obtained by immobilization of the cells on poly(PVA/HEMA), the addition of N-IPAAm to poly(PVA/HEMA) protected the immobilized cells from temperatures above 35 °C during the fermentation process. The optimal pH (buffered pH) of the biotransformation of hydrocortisone by immobilized and free cells was 7.0, but the maximum yield of prednisolone (60%) was obtained by immobilized cells in comparison with free cells (42%) also at pH 7.0. The prednisolone yield reached 60–65% with 1,2-propanediol cosolvent containing media and 60–62% in the case of ethanediol cosolvent containing media at 1% (v/v) of both cosolvents. 10 mg/50 ml Tween 80 the medium increased the prednisolone yield by only 1.1-fold compared with the control. The maximum bioconversion efficiency was obtained at a substrate concentration of 20 mg/50 ml medium. Stability studies showed that the immobilized cells can be used for seven times without any significant decrease in activity.     

Serial Sections of Cooked Rice Embedded in Carbowax

Serial sections of cooked rice kernels may be obtained by following either of two dehydration schedules and embedding in Carbowax. In the first schedule the cooked, rinsed and drained kernels are immersed several days in a nonaqueous fixative composed of: isopropyl alcohol, 10 ml; propionic acid, 30 ml; acetone, 10 ml; methylal, 40 ml; dioxane, 30 ml; and propylene glycol, 30 ml (Newcomer's, modified), followed by 7 or 8 days in equal parts of propylene glycol, dioxane and glycerol (changed once), and 4 days on a warming table in the same mixture with 5% Carbowax added. The dehydrated kernels are then infiltrated 4-24 hr with a Carbowax embedding mixture. In the second schedule they are immersed several days in an aqueous solution consisting of: propylene glycol, 12.5 ml; polyethylene glycol 400, 12.5 ml; either with 75 ml of water containing 0.1% thymol, or with a mixture of water, 65 ml; formalin, 10 ml; CaCl₂, 1 gm; and CdCl₂, 1 gm; followed by 3 or 4 days in 50% propylene glycol, and 3 or 4 days on a warming table in 80% propylene glycol with 5% Carbowax added. Infiltration is as above. The composition of the embedding mixture is varied according to the temperature and humidity likely to prevail during sectioning. The texture of the wax may be improved by adding small amounts of gum arabic, spermaceti, and glycerol. Serial sections 3-10 μ thick are placed on clean dry slides, and adhesive dropped at the edges of the ribbon of Carbowax until it is dissolved. The adhesive consists of water-glass (concentrated solution), 1 ml; concentrated ammonia, 1 ml; Carbowax, 5 gm; and water, 98 ml. After the slides are dry they are stored, or immersed 10 min in chloroform, collodionized, and passed to staining solutions. Atmospheric conditions affect not only the Carbowax, but also the response to reagents of cooked rice and of sections.     

Staining Mitochondria With Hematoxylin After Formalin-Sublimate Fixation; A Rapid Method

Mitochondria were stained in liver, kidney, pancreas, adrenal and intestinal mucosa of rat and mouse. Tissues 1 mm thick, were fixed in a mixture of saturated aqueous HgCl₂, 90 ml; formalin (37-38% HCHO), 10 ml, at room temperature (25°C) for 1 hr. Deparaffinized sections 3-4μ thick were treated with Lugol's iodine (U.S.P.) followed by Na₂S₂O₃ (5%), rinsed in water and the ribonucleic acid removed by any of the following procedures: 0.2 M McIlavaine's buffer, pH 7.0, 2 hr, or 0.2 M phosphate buffer, pH 7.0, 2 hr at 37°C; 0.1% aqueous ribonuclease, 2 hr at 37°C; 5% aqueous trichloracetic acid overnight at 37°C; or 1% KOH at room temperature for 1 hr. After washing in water, sections were treated with a saturated solution of ferric ammonium alum at 37°C for 8-12 hr and colored by Regaud's ripened hematoxylin for 18 hr. They were then differentiated in 1% ferric ammonium alum solution while under microscopic observation.