Oligopeptidase B: a processing peptidase involved in pathogenesis

Oligopeptidase B is a "processing peptidase" from the prolyl oligopeptidase family of serine peptidases present in Gram negative bacteria, protozoa and plants. Unlike the prototype prolyl oligopeptidase, oligopeptidase B hydrolyses peptides on the carboxyl side of pairs of basic amino acid residues. Molecular modelling and mutation studies have identified carboxyl dyads in the C-terminal catalytic domain that mediate substrate and inhibitor binding. The peptidase is efficiently inhibited by non-peptide irreversible serine peptidase inhibitors, peptidyl-chloromethylketones, -phosphonate alpha-aminoalkyl diphenyl esters with basic residues at P1, and tripeptide aldehydes, but not by proteinaceous host plasma inhibitors such as alpha2-macroglobulin and serpins. Access of these large molecular mass inhibitors and substrates larger than approximately 30 amino acid residues to the catalytic cleft is restricted by the N-terminal beta-propeller domain. The physiological role of oligopeptidase B from various sources has not yet been elucidated. However, the peptidase has been identified as an important virulence factor and therapeutic agent in animal trypanosomosis. This review highlights the structure-function properties of oligopeptidase B in context with its physiological and/or pathological roles which make the enzyme a promising drug target.     

Oligopeptidase B: a new type of serine peptidase with a unique substrate-dependent temperature sensitivity

Oligopeptidase B, a member of the novel prolyl oligopeptidase family of serine peptidases, is involved in cell invasion by trypanosomes. The kinetic analysis of the reactions of oligopeptidase B, which preferentially cleaves peptides at two adjacent basic residues, has revealed significant differences from the trypsin-like serine peptidases. (i) The pH dependence of k(cat)/K(m) deviates from normal bell-shaped curves due to ionization of an enzymatic group characterized by a macroscopic pK(a) of approximately 8.3. The effect of this group is abolished at high ionic strength. (ii) The second-order acylation rate constants, k(cat)/K(m), are similar with the ester and the corresponding amide substrates, suggesting that their chemical reactivity does not prevail in the rate-limiting step. The kinetic deuterium isotope effects indicate that the rate-limiting step for k(cat)/K(m) is principally governed by conformational changes. (iii) The pH-k(cat)/K(m) profile and the very low rate constant for benzoyl-citrulline ethyl ester reveal a new kinetically influential group ionizing below the pK(a) of the active site histidine and indicate that the positive charge of arginine is essential for effective catalysis. (iv) The enzyme is inhibited by high concentrations of substrate. The mechanism of inhibition markedly varies with the reaction conditions. (v) The optimum temperature for the reactions of amide substrates is unusually low, slightly below 25 degrees C, whereas with benzoyl-arginine ethyl ester a linear Eyring plot is obtained up to 39 degrees C. The positive entropies of activation point to substantial reorganization of water molecules upon substrate binding.     

Structural relationship between lipases and peptidases of the prolyl oligopeptidase family.

In prolyl oligopeptidase and its homologues, which constitute a new serine protease family, the order of the catalytic Ser and His residues in the amino acid sequence is the reverse of what is found in the trypsin and subtilisin families. The exact position of the third member of the catalytic triad, an Asp residue, has not yet been identified in the new family. Recent determination of the three-dimensional structures of pancreatic and microbial lipases has shown that the order of their catalytic residues is Ser, Asp, His, and this fits the order Ser, His of prolyl oligopeptidase. However, there is no sequence homology between lipases and peptidases, except for a 10-residue segment, which encompasses the essential Ser, and for the immediate vicinity of the catalytic Asp and His residues. This comparison identifies the catalytic Asp residue in the prolyl oligopeptidase family. The relative positions of the three catalytic residues in peptidases and microbial lipases were the same and this indicated structural and possibly evolutionary relationship between the two families.     

Substrate-dependent competency of the catalytic triad of prolyl oligopeptidase

Prolyl oligopeptidase, a serine peptidase unrelated to trypsin and subtilisin, is implicated in memory disorders and is an important target of drug design. The catalytic competence of the Asp(641) residue of the catalytic triad (Ser(554), Asp(641), His(680)) was studied using the D641N and D641A variants of the enzyme. Both variants displayed 3 orders of magnitude reduction in k(cat)/K(m) for benzyloxycarbonyl-Gly-Pro-2-naphthylamide. Using an octapeptide substrate, the decrease was 6 orders of magnitude, whereas with Z-Gly-Pro-4-nitrophenyl ester there was virtually no change in k(cat)/K(m). This indicates that the contribution of Asp(641) is very much dependent on the substrate-leaving group, which was not the case for the classic serine peptidase, trypsin. The rate constant for benzyloxycarbonyl-Gly-Pro-thiobenzylester conformed to this series as demonstrated by a method designed for monitoring the hydrolysis of thiolesters in the presence of thiol groups. Alkylation of His(680) with Z-Gly-Pro-CH(2)Cl was concluded with similar rate constants for wild-type and D641A variant. However, kinetic measurements with Z-Gly-Pro-OH, a product-like inhibitor, indicated that the His(680) is not accessible in the enzyme variants. Crystal structure determination of these mutants revealed subtle perturbations related to the catalytic activity. Many of these observations show differences in the catalysis between trypsin and prolyl oligopeptidase.     

Selective inhibition of fibroblast activation protein protease based on dipeptide substrate specificity

Fibroblast activation protein (FAP) is a transmembrane serine peptidase that belongs to the prolyl peptidase family. FAP has been implicated in cancer; however, its specific role remains elusive because inhibitors that distinguish FAP from other prolyl peptidases like dipeptidyl peptidase-4 (DPP-4) have not been developed. To identify peptide motifs for FAP-selective inhibitor design, we used P(2)-Pro(1) and acetyl (Ac)-P(2)-Pro(1) dipeptide substrate libraries, where P(2) was varied and substrate hydrolysis occurs between Pro(1) and a fluorescent leaving group. With the P(2)-Pro(1) library, FAP preferred Ile, Pro, or Arg at the P(2) residue; however, DPP-4 showed broad reactivity against this library, precluding selectivity. By contrast, with the Ac-P(2)-Pro(1) library, FAP cleaved only Ac-Gly-Pro, whereas DPP-4 showed little reactivity with all substrates. FAP also cleaved formyl-, benzyloxycarbonyl-, biotinyl-, and peptidyl-Gly-Pro substrates, which DPP-4 cleaved poorly, suggesting an N-acyl-Gly-Pro motif for inhibitor design. Therefore, we synthesized and tested the compound Ac-Gly-prolineboronic acid, which inhibited FAP with a K(i) of 23 +/- 3 nm. This was approximately 9- to approximately 5400-fold lower than the K(i) values for other prolyl peptidases, including DPP-4, DPP-7, DPP-8, DPP-9, prolyl oligopeptidase, and acylpeptide hydrolase. These results identify Ac-Gly-BoroPro as a FAP-selective inhibitor and suggest that N-acyl-Gly-Pro-based inhibitors will allow testing of FAP as a therapeutic target.     

The acylaminoacyl peptidase from Aeropyrum pernix K1 thought to be an exopeptidase displays endopeptidase activity

Mammalian acylaminoacyl peptidase, a member of the prolyl oligopeptidase family of serine peptidases, is an exopeptidase, which removes acylated amino acid residues from the N terminus of oligopeptides. We have investigated the kinetics and inhibitor binding of the orthologous acylaminoacyl peptidase from the thermophile Aeropyrum pernix K1 (ApAAP). Complex pH-rate profiles were found with charged substrates, indicating a strong electrostatic effect in the surroundings of the active site. Unexpectedly, we have found that oligopeptides can be hydrolysed beyond the N-terminal peptide bond, demonstrating that ApAAP exhibits endopeptidase activity. It was thought that the enzyme is specific for hydrophobic amino acids, in particular phenylalanine, in accord with the non-polar S1 subsite of ApAAP. However, cleavage after an Ala residue contradicted this notion and demonstrated that P1 residues of different nature may bind to the S1 subsite depending on the remaining peptide residues. The crystal structures of the complexes formed between the enzyme and product-like inhibitors identified the oxyanion-binding site unambiguously and demonstrated that the phenylalanine ring of the P1 peptide residue assumes a position different from that established in a previous study, using 4-nitrophenylphosphate. We have found that the substrate-binding site extends beyond the S2 subsite, being capable of binding peptides with a longer N terminus. The S2 subsite displays a non-polar character, which is unique among the enzymes of this family. The S3 site was identified as a hydrophobic region that does not form hydrogen bonds with the inhibitor P3 residue. The enzyme-inhibitor complexes revealed that, upon ligand-binding, the S1 subsite undergoes significant conformational changes, demonstrating the plasticity of the specificity site.     

The catalytic aspartate is protonated in the Michaelis complex formed between trypsin and an in vitro evolved substrate-like inhibitor: a refined mechanism of serine protease action

The mechanism of serine proteases prominently illustrates how charged amino acid residues and proton transfer events facilitate enzyme catalysis. Here we present an ultrahigh resolution (0.93 Å) x-ray structure of a complex formed between trypsin and a canonical inhibitor acting through a substrate-like mechanism. The electron density indicates the protonation state of all catalytic residues where the catalytic histidine is, as expected, in its neutral state prior to the acylation step by the catalytic serine. The carboxyl group of the catalytic aspartate displays an asymmetric electron density so that the O_δ2–C_γ bond appears to be a double bond, with O_δ2 involved in a hydrogen bond to His-57 and Ser-214. Only when Asp-102 is protonated on O_δ1 atom could a density functional theory simulation reproduce the observed electron density. The presence of a putative hydrogen atom is also confirmed by a residual mF_obs − DF_calc density above 2.5 σ next to O_δ1. As a possible functional role for the neutral aspartate in the active site, we propose that in the substrate-bound form, the neutral aspartate residue helps to keep the pK_a of the histidine sufficiently low, in the active neutral form. When the histidine receives a proton during the catalytic cycle, the aspartate becomes simultaneously negatively charged, providing additional stabilization for the protonated histidine and indirectly to the tetrahedral intermediate. This novel proposal unifies the seemingly conflicting experimental observations, which were previously seen as either supporting the charge relay mechanism or the neutral pK_a histidine theory.     

An Essential Signal Peptide Peptidase Identified in an RNAi Screen of Serine Peptidases of Trypanosoma brucei

The serine peptidases of Trypanosoma brucei have been viewed as potential drug targets. In particular, the S9 prolyl oligopeptidase subfamily is thought to be a good avenue for drug discovery. This is based on the finding that some S9 peptidases are secreted and active in the mammalian bloodstream, and that they are a class of enzyme against which drugs have successfully been developed. We collated a list of all serine peptidases in T. brucei, identifying 20 serine peptidase genes, of which nine are S9 peptidases. We screened all 20 serine peptidases by RNAi to determine which, if any, are essential for bloodstream form T. brucei survival. All S9 serine peptidases were dispensable for parasite survival in vitro, even when pairs of similar genes, coding for oligopeptidase B or prolyl oligopeptidase, were targeted simultaneously. We also found no effect on parasite survival in an animal host when the S9 peptidases oligopeptidase B, prolyl oligopeptidase or dipeptidyl peptidase 8 were targeted. The only serine peptidase to emerge from the RNAi screen as essential was a putative type-I signal peptide peptidase (SPP1). This gene was essential for parasite survival both in vitro and in vivo. The growth defect conferred by RNAi depletion of SPP1 was rescued by expression of a functional peptidase from an RNAi resistant SPP1 gene. However, expression of catalytically inactive SPP1 was unable to rescue cells from the SPP1 depleted phenotype, demonstrating that SPP1 serine peptidase activity is necessary for T. brucei survival.     

Detection of large pKa perturbations of an inhibitor and a catalytic group at an enzyme active site, a mechanistic basis for catalytic power of many enzymes

Delta(5)-3-Ketosteroid isomerase catalyzes cleavage and formation of a C-H bond at a diffusion-controlled limit. By determining the crystal structures of the enzyme in complex with each of three different inhibitors and by nuclear magnetic resonance (NMR) spectroscopic investigation, we evidenced the ionization of a hydroxyl group (pK(a) approximately 16.5) of an inhibitor, which forms a low barrier hydrogen bond (LBHB) with a catalytic residue Tyr(14) (pK(a) approximately 11.5), and the protonation of the catalytic residue Asp(38) with pK(a) of approximately 4.5 at pH 6.7 in the interaction with a carboxylate group of an inhibitor. The perturbation of the pK(a) values in both cases arises from the formation of favorable interactions between inhibitors and catalytic residues. The results indicate that the pK(a) difference between catalytic residue and substrate can be significantly reduced in the active site environment as a result of the formation of energetically favorable interactions during the course of enzyme reactions. The reduction in the pK(a) difference should facilitate the abstraction of a proton and thereby eliminate a large fraction of activation energy in general acid/base enzyme reactions. The pK(a) perturbation provides a mechanistic ground for the fast reactivity of many enzymes and for the understanding of how some enzymes are able to extract a proton from a C-H group with a pK(a) value as high as approximately 30.     

Determinants of cysteine pKa values in creatine kinase and alpha1-antitrypsin

The structural determinants of the unusually low pK(a) values of Cys282 in human creatine kinase and Cys232 in alpha1-antitrypsin were studied computationally. We have demonstrated that hydrogen bonding to the cysteine residue is the prime determinant for both proteins. In the case of creatine kinase, the hydrogen bond donors are a serine side chain and an amide NH-group, while in alpha1-antitrypsin the donor is an amide NH. Each hydrogen bond lowers the pK(a) by between 0.8 and 1.5 pH units. The 1.1-unit lowering due to the Ser284-Cys282 hydrogen bond is in good agreement with the 1.2-unit difference between the Cys282 pK(a) value of wild-type and the S284A mutant of creatine kinase.     

Importance of tetrahedral intermediate formation in the catalytic mechanism of the serine proteases chymotrypsin and subtilisin

Two new inhibitors in which the terminal α-carboxyl groups of Z-Ala-Ala-Phe-COOH and Z-Ala-Pro-Phe-COOH have been replaced with a proton to give Z-Ala-Ala-Phe-H and Z-Ala-Pro-Phe-H, respectively, have been synthesized. Using these inhibitors, we estimate that for α-chymotrypsin and subtilisin Carlsberg the terminal carboxylate group decreases the level of inhibitor binding 3-4-fold while a glyoxal group increases the level of binding by 500-2000-fold. We show that at pH 7.2 the effective molarities of the catalytic hydroxyl group of the active site serine are 41000-229000 and 101000-159000 for α-chymotrypsin and subtilisin Carlsberg, respectively. It is estimated that oxyanion stabilization and the increased effective molarity of the catalytic serine hydroxyl group can account for the catalytic efficiency of the reaction. We argue that substrate binding induces the formation of a strong hydrogen bond or low-barrier hydrogen bond between histidine-57 and aspartate-102 that increases the pK(a) of the active site histidine, allowing it to be an effective general base catalyst for the formation of the tetrahedral intermediate and increasing the effective molarity of the catalytic hydroxyl group of serine-195. A catalytic mechanism for acyl intermediate formation in the serine proteases is proposed.     

Crystal structure of the stromelysin-3 (MMP-11) catalytic domain complexed with a phosphinic inhibitor mimicking the transition-state

Stromelysin-3 (ST3) is a matrix metalloproteinase (MMP-11) whose proteolytic activity plays an important role in tumorigenicity enhancement. In breast cancer, ST3 is a bad prognosis marker: its expression is associated with a poor clinical outcome. This enzyme therefore represents an attractive therapeutic target.The topology of matrix metalloproteinases (MMPs) is remarkably well conserved, making the design of highly specific inhibitors difficult. The major difference between MMPs lies in the S(1)' subsite, a well-defined hydrophobic pocket of variable depth. The present crystal structure, the first 3D-structure of the ST3 catalytic domain in interaction with a phosphinic inhibitor mimicking a (d, l) peptide, clearly demonstrates that its S(1)' pocket corresponds to a tunnel running through the enzyme. This open channel is filled by the inhibitor P(1)' group which adopts a constrained conformation to fit this pocket, together with two water molecules interacting with the ST3-specific residue Gln215. These observations provide clues for the design of more specific inhibitors and show how ST3 can accommodate a phosphinic inhibitor mimicking a (d, l) peptide.The presence of a water molecule interacting with one oxygen atom of the inhibitor phosphinyl group and the proline residue of the Met-turn suggests how the intermediate formed during proteolysis may be stabilized. Furthermore, the hydrogen bond distance observed between the methyl of the phosphinic group and the carbonyl group of Ala182 mimics the interaction between this carbonyl group and the amide group of the cleaved peptidic bond. Our crystal structure provides a good model to study the MMPs mechanism of proteolysis.     

Properties of post-proline cleaving enzymes from Tenebrio molitor

Two post-proline cleaving enzymes PRE1 and PRE2 with molecular masses of 101 and 62 kDa, respectively, capable of hydrolyzing Z-AlaAlaPro-pNA were isolated for the first time from the midgut of the flour beetle Tenebrio molitor and characterized. PRE1 is active only in acidic media, with a maximum at pH 5.6, whereas PRE2, both in acidic and alkaline media with a maximum at pH 7.9. Using inhibitory analysis, both PRE1 and PRE2 were shown to belong to serine peptidases. Some data indicate that a Cys residue is located close to the PRE2 active site. Z-Pro-prolinal, a specific inhibitor of prolyl oligopeptidases, inhibits completely PRE2 and partially PRE1. The substrate specificities of the isolated enzymes were studied. It was shown that Z-AlaAla-Pro-pNA was the best substrate for PRE1, and Z-AlaPro-pNA, for PRE2. The combination of the studied properties allowed characterization of PRE2 as a prolyl oligopeptidase.     

Properties of post-proline cleaving enzymes from <Emphasis Type="Italic">Tenebrio molitor</Emphasis>

Two post-proline cleaving peptidases PPCP1 and PPCP2 with molecular masses of 101 and 63 kDa, respectively, hydrolyzing Z-AlaAlaPro-pNA were isolated for the first time from the larval midgut of the yellow mealworm Tenebrio molitor and characterized. PPCP1 was active only in acidic media, with a maximum at pH 5.6, whereas PPCP2, both in acidic and alkaline media with a maximum at pH 7.9. Using inhibitory analysis, both PPCP1 and PPCP2 were shown to belong to serine peptidases. The data obtained indicate that a Cys residue is located close to the PPCP2 substrate binding site. Z-Pro-prolinal, a specific inhibitor of prolyl oligopeptidases, completely inhibited PPCP2 and partially PPCP1. The substrate specificities of the isolated enzymes were studied. Z-Ala-Ala-Pro-pNA was the best substrate for PPCP1, and Z-Ala-Pro-pNA, for PPCP2. The combination of the properties allows characterization of PPCP2 as a proplyl oligopeptidase.     

Crystal structure of the E. coli dipeptidyl carboxypeptidase Dcp: further indication of a ligand-dependent hinge movement mechanism

Dcp from Escherichia coli is a 680 residue cytoplasmic peptidase, which shows a strict dipeptidyl carboxypeptidase activity. Although Dcp had been assigned to the angiotensin I-converting enzymes (ACE) due to blockage by typical ACE inhibitors, it is currently grouped into the M3 family of mono zinc peptidases, which also contains the endopeptidases neurolysin and thimet oligopeptidase (TOP). We have cloned, expressed, purified, and crystallized Dcp in the presence of an octapeptide "inhibitor", and have determined its 2.0A crystal structure using MAD methods. The analysis revealed that Dcp consists of two half shell-like subdomains, which enclose an almost closed two-chamber cavity. In this cavity, two dipeptide products presumably generated by Dcp cleavage of the octapeptide bind to the thermolysin-like active site fixed to side-chains, which are provided by both subdomains. In particular, an Arg side-chain backed by a Glu residue, together with two Tyr phenolic groups provide a charged anchor for fixing the C-terminal carboxylate group of the P2' residue of a bound substrate, explaining the strict dipeptidyl carboxypeptidase specificity of Dcp. Tetrapeptidic substrates are fixed only via their main-chain functions from P2 to P2', suggesting a broad residue specificity for Dcp. Both subdomains exhibit very similar chain folds as the equivalent but abducted subdomains of neurolysin and TOP. Therefore, this "product-bound" Dcp structure seems to represent the inhibitor/substrate-bound "closed" form of the M3 peptidases, generated from the free "open" substrate-accessible form by a hinge-bending mechanism. A similar mechanism has recently been demonstrated experimentally for ACE2.     

2(S)-(Cycloalk-1-enecarbonyl)-1-(4-phenyl-butanoyl)pyrrolidines and 2(S)-(aroyl)-1-(4-phenylbutanoyl)pyrrolidines as prolyl oligopeptidase inhibitors

In order to replace the P2-P1 amide group, different 1-cycloalkenyls and 2-aryls were studied in the place of the P1 pyrrolidine group of a 4-phenylbutanoyl-L-Pro-pyrrolidine structure, which is a well-known prolyl oligopeptidase inhibitor SUAM-1221. The 1-cyclopentenyl and the 2-thienyl groups gave novel compounds, which were equipotent with the corresponding pyrrolidine-analog SUAM-1221. It was shown that the P2-P1 amide group of POP inhibitors can be replaced by an alpha,beta-unsaturated carbonyl group or the aryl conjugated carbonyl group.     

An introduction of a pyridine group into the structure of prolyl oligopeptidase inhibitors

A series of ionizable prolyl oligopeptidase inhibitors were developed through the introduction of a pyridyl group to the P3 position of the prolyl oligopeptidase inhibitor structure. The study was performed on previously developed prolyl oligopeptidase inhibitors with proline mimetics at the P2 position. The 3-pyridyl group resulted in equipotent compounds as compared to the parent compounds. It was shown that the pyridyl group improves water solubility and, in combination with a 5(R)-tert-butyl-l-prolyl group at the P2 position, good lipophilicity can be achieved.     

Electrostatic environment at the active site of prolyl oligopeptidase is highly influential during substrate binding

The positive electrostatic environment of the active site of prolyl oligopeptidase was investigated by using substrates with glutamic acid at positions P2, P3, P4, and P5, respectively. The different substrates gave various pH rate profiles. The pKa values extracted from the curves are apparent parameters, presumably affected by the nearby charged residues, and do not reflect the ionization of a simple catalytic histidine as found in the classic serine peptidases like chymotrypsin and subtilisin. The temperature dependence of kcat/Km did not produce linear Arrhenius plots, indicating different changes in the individual rate constants with the increase in temperature. This rendered it possible to calculate these constants, i.e. the formation (k1) and decomposition (k-1) of the enzyme-substrate complex and the acylation constant (k2), as well as the corresponding activation energies. The results have revealed the relationship between the complex Michaelis parameters and the individual rate constants. Structure determination of the enzyme-substrate complexes has shown that the different substrates display a uniform binding mode. None of the glutamic acids interacts with a charged group. We conclude that the specific rate constant is controlled by k1 rather than k2 and that the charged residues from the substrate and the enzyme can markedly affect the formation but not the structure of the enzyme-substrate complexes.     

His507 of acylaminoacyl peptidase stabilizes the active site conformation, not the catalytic intermediate

Acylaminoacyl peptidase is a member of the prolyl oligopeptidase family. Amino acid sequence alignment suggests that the stabilization of the tetrahedral intermediate should be mediated by His507 rather than by a tyrosine residue found in the other family members of this serine peptidase group. The pH dependence of k(cat)/K(m) did not reveal any effect of His507. Substitution of an alanine for His507 gave the same bell-shaped pH rate profile with the same pK(a) values (7.0 and 8.7). However, the value of the rate constant was 85 times lower with the modified enzyme, which indicated that His507 is an important residue that is probably involved in the formation of the 3-dimensional structure.     

Ab initio conformational study of N-acetyl-L-proline-N',N'-dimethylamide: a model for polyproline

We report here the results on N-acetyl-l-proline-N',N'-dimethylamide (Ac-Pro-NMe2) as a model for polyproline at the HF/6-31+G(d) level with the conductor-like polarizable continuum model of self-consistent reaction field methods to figure out the conformational preference and cis-trans isomerization of polyproline in the gas phase, chloroform, methanol, and water. The second methyl substitution at the carboxyl amide end results in different backbone structures and their populations from those of N-acetyl-L-proline-N-methylamide (Ac-Pro-NHMe). In particular, all conformations with the C7 hydrogen bond between acetyl and amide ends, which is the most probable conformations of Ac-Pro-NHMe in the gas phase and in nonpolar solvents, disappeared for Ac-Pro-NMe2 even in the gas phase due to the lack of amide hydrogen. The dominant conformation for Ac-Pro-NMe2 is the polyproline II structure with the trans prolyl peptide bond in the gas phase and in solutions. In methanol, the population of the polyproline I structure with the cis prolyl peptide bond is calculated to be larger than that in water, which is consistent with experiments. It should be noted that Ac-Pro-NMe2 has higher rotational barriers for the cis-trans isomerization of the Ac-Pro peptide bond than Ac-Pro-NHMe in the gas phase and in solutions, which could be due to the lack of the intramolecular hydrogen bond between prolyl nitrogen and carboxyl N-H group for the transition state of Ac-Pro-NMe2. The rotational barriers for Ac-Pro-NMe2 are increased with the increase of solvent polarity, as seen for Ac-Pro-NHMe.