Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Candida antarctica lipase B catalyzed enantioselective acylation of pyrimidine acyclonucleoside

Abstract

The influence of solvent and acyl group donor on selectivity of the transesterification reaction of 1-[1′,3′-dihydroxy-2′-propoxymethyl]-5-methyluracil, a structural analogue of ganciclovir was examined. Lipase (EC 3.1.1.3) B from Candida antarctica (CALB) enabled desymmetrization of prochiral hydroxyl groups when 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) was used as a reaction medium. It was observed that CALB was up to 2.7–4 times more enantioselective in the ionic liquid [Bmim][PF₆] than in conventional organic solvents.     

Identification of suitable ionic liquids for application in the enzymatic hydrolysis of rutin by an automated screening

An automated method in milliliter scale was developed for the screening of process parameters concerning the hydrolysis of the flavonoid rutin catalyzed by the rhamnosidase activity of naringinase from Penicillium decumbens. Besides the effect of additives such as ionic liquids and low molecular salts, the productivity in a multiple phase system as well as the recyclability of the enzyme in repetitive batches were studied. The hydrophobic ionic liquid (IL) trihexyl(tetradecyl)phosphonium bis(trifluormethylsulfonyl)imide [P(h₃)t][Tf₂N] was identified to combine the most favorable characteristics out of 23 investigated ILs with regard to enzyme compatibility, substrate solubility and enzyme partition coefficient. Also, for the corresponding cations 1-ethyl-3-methylimidazolium [EMIM], 1-butyl-3-methylimidazolium [BMIM], 1-butyl-1-methylpyrrolidinium [BMPL] and 1-octyl-3-methylimidazolium [OMIM], the entity with the [Tf₂N] anion was best tolerated by the naringinase. With increasing IL content, higher space time yields with up to 1.5 g/(L h) for 80% (v/v) [P(h₃)t][Tf₂N] were achieved. Enhanced specific enzyme activity was observed in the presence of Ca²⁺ ions. By addition of [P(h₃)t][Tf₂N] and calcium chloride, the reactive aqueous phase was successfully used in three repetitive batches with full conversion.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Effect of replacing [NTf2] by [PF6] anion on the [BMIm][NTf2] ionic liquid confined by gold

The effect of replacing bis(trifluoromethylsulphonyl)imide ([NTf₂]) by hexafluorophosphate ([PF₆]) in room temperature ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide ([BMIm][NTf₂]) confined between two gold interfaces is herein reported through molecular dynamics simulations using all-atom non-polarisable force-fields. Five systems were studied ranging from pure [BMIm][NTf₂] to pure [BMIm][PF₆], with [PF₆] molar fractions of 0, 0.125, 0.25, 0.375 and 0.5. Special attention was drawn to investigate the impact of the [PF₆] anion on the IL, in particular on the first layers of the liquid in close contact with the solid gold surface.     

Strong substrate-stabilizing effect of a water-miscible ionic liquid [BMIM][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The effects of a water-miscible ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), on both thermodynamics and kinetic mechanism of the horseradish peroxidase (HRP)-catalyzed oxidation of guaiacol (2-methoxyphenol) by H₂O₂ were investigated. The ionic liquid stabilized the ground state of guaiacol by causing an 8-fold increase of K_m from 3 to 23 mM upon the addition of 25% (v/v) [BMIM][BF₄]. In addition, the effect of [BMIM][BF₄] in decreasing the k_cat value of HRP catalysis was described by a non-competitive inhibition mechanism. The value of the inhibition constant of [BMIM][BF₄] was 2.9 M indicating that the ionic liquid plays the role of a weak non-competitive inhibitor for HRP catalysis.     

Partial uncompetitive inhibition of horseradish peroxidase by a water-miscible ionic liquid [BMIM][MeSO4

The ionic liquid, 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MeSO₄]), was used to investigate the catalytic mechanism of horseradish peroxidase (HRP). The ionic liquid decreased both K_m and k_cat values for the HRP-catalyzed oxidation of guaiacol (2-methoxyphenol) by H₂O₂. These studies imply that [BMIM][MeSO₄] inhibits the enzyme in an uncompetitive manner. The incorporation of substrate stabilization effects measured by a thermodynamic method into the partial uncompetitive inhibition scheme successfully describes HRP-catalysis in the presence of [BMIM][MeSO₄], which participates as the inhibitor. The inhibition constant of the ionic liquid was 0.051 M. The turn-over number of the native HRP was almost 14-times higher than that of the HRP-ionic liquid complex indicating that [BMIM][MeSO₄] does not form a dead-end complex with HRP.     

Extracting keratin from chicken feathers by using a hydrophobic ionic liquid

Keratin was extracted from chicken feathers by using a hydrophobic ionic liquid (IL), 1-hydroxyethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([HOEMIm][NTf₂]). Extracted keratin has good solubility in water while the ionic liquid is immiscible with water, and therefore the extracted keratin could be easily separated from the reaction system by water. The effects of ionic liquid, NaHSO₃, reaction temperature and time were investigated and extracting conditions were optimized. The maximum yield of keratin was up to about 21% with mass ratio of feathers to NaHSO₃1:1 and mass ratio of feathers to ionic liquid 1:40 at 80 °C for 4 h. Moreover, there was no obvious loss in the yield after ionic liquid was reused for five batches under optimized conditions. In addition, the recovery of ionic liquid was about 95% each time. The results indicated that [HOEMIm][NTf₂] was very efficient as catalyst and solvent for dissolving feathers and could be easily recovered due to its hydrophobicity.     

Enhanced whole-cell biodehydrogenation of 11β-hydroxyl medroxyprogesterone in a biphasic system containing ionic liquid

A hydrophilic ionic liquid, 1-butyl-3-methylimidazolium (L)-lactate ([bmim][lactate]), was successfully employed as a co-solvent to improve the biodehydrogenation of steroid 11β-hydroxyl medroxyprogesterone (HMP) to pregna-1,4-diene-6α-methyl-3,20-dione-11β,17α-dihydroxy (PDMDD) in an aqueous-organic biphasic system using Arthrobacter simplex UR106 cells. First, a suitable biphasic system was constituted, composed of toluene and Tris-HCl buffer (0.05 mol/L, pH 7.6) at a 0.4 (V _org /V _aq ) volumetric phase ratio. Investigation of biodehydrogenation with the addition of [bmim][lactate] to the aqueous phase was then performed. The results demonstrate that biodehydrogenation is more efficient in a biphasic system containing 2% [bmim][lactate] as a co-solvent compared to an aqueous-toluene two-phase system. Higher bioconversion (83.2% versus 56.4%) was observed after 16 h at a substrate concentration of 80 mg HMP in 8 mL of toluene.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Properties of an ionic liquid-tolerant <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic">amyloliquefaciens</Emphasis> CMW1 and its extracellular protease

An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF₃SO₃) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF₃SO₃). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF₃SO₃, [BMIM]Cl, [BMIM]CF₃SO₃, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0–12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.     

Catalytic activity of α-chymotrypsin in enzymatic peptide synthesis in ionic liquids

The catalytic activity of α-chymotrypsin in the enzymatic peptide synthesis of N-acetyl-l-tryptophan ethyl ester with glycyl glycinamide was examined in ionic liquids and organic solvents. The water content in 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([emim][FSI]) affected the initial rates of peptide synthesis and hydrolysis. The activity of α-chymotrypsin was influenced by a kind of anions consisting of the same cation, [emim], when an ionic liquid was used as a solvent. The initial rate of peptide synthesis was improved 16-fold by changing from an organic solvent, acetonitrile, to an ionic liquid, [emim][FSI], at 25 °C. The activity of α-chymotrypsin in the peptide synthesis in [emim][FSI] was 17 times greater than that in acetonitrile at 60 °C, although the activity of α-chymotrypsin in the peptide synthesis gradually decreased with an increase in reaction temperature in [emim][FSI], similar to organic solvents. Moreover, α-chymotrypsin exhibited activity in [emim][FSI] and [emim][PF₆] at 80 °C.     

Effect of ionic liquid [BMIM][PF<Subscript>6</Subscript>] on asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The effect of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) on the asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate (EOPB) to synthesize optical active ethyl 2-hydroxy-4-phenylbutyrate (EHPB) catalyzed by Saccharomyces cerevisiae was investigated. (R)-EHPB [70.4%, e.e.(R)] is obtained using ethyl ether or benzene as the solvent. The main product is (S)-EHPB [27.7%, e.e.(S)] in [BMIM][PF₆]. However, in ionic liquid-water (10:1, v/v) biphasic system, the enantioselectivity of the reduction is shifted towards (R)-side, and e.e.(R) is increased from 6.6 to 82.5% with the addition of ethanol (1%, v/v). The effect of the use of [BMIM][PF₆] as an additive in relatively small amounts on the reduction was also studied. We find that there is a decline in the enantioselectivity of the reduction in benzene. In addition, a decrease in the conversion of EOPB and the yield of EHPB with increasing [BMIM][PF₆] concentrations occurs in either organic solvent–water biphasic systems or benzene.     

A recyclable enzymatic biodiesel production process in ionic liquids

Immobilized Candida antarctica lipase B suspended in ionic liquids containing long alkyl-chain cations showed excellent synthetic activity and operational stability for biodiesel production. The interest of this process lies in the possibility of recycling the biocatalyst and the easy separation of the biodiesel from the reaction mixture. The ionic liquids used, 1-hexadecyl-3-methylimidazolium triflimide ([C(16)MIM][NTf(2)]) and 1-octadecyl-3-methylimidazolium triflimide ([C(18)MIM][NTf(2)]), produced homogeneous systems at the start of the reaction and, at the end of the same, formed a three-phase system, allowing the selective extraction of the products using straightforward separation techniques, and the recycling of both the ionic liquid and the enzyme. These are very important advantages which may be found useful in environmentally friendly production conditions.     

Optimization of lipase-catalyzed glucose ester synthesis in ionic liquids

Lipase-catalyzed esterification of glucose with fatty acids in ionic liquids (ILs) mixture was investigated by using supersaturated glucose solution. The effect of ILs mixture ratio, substrate ratio, lipase content, and temperature on the activity and stability of lipase was also studied. The highest yield of sugar ester was obtained in a mixture of 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-methyl-3-octylimidazolium bis[(trifluoromethyl)-sulfonyl]amide ([Omim][Tf₂N]) with a volume ratio of 9:1, while Novozym 435 (Candida antarctica type B lipase immobilized on acrylic resin) showed the optimal stability and activity in a mixture of [Bmim][TfO] and [Omim][Tf₂N] with a 1:1 volume ratio. Reuse of lipase and ILs was successfully carried out at the optimized reaction conditions. After 5 times reuse of Novozym 435 and ILs, 78% of initial activity was remained.     

Catalytic activity of α-chymotrypsin in enzymatic peptide synthesis in ionic liquids

The catalytic activity of α-chymotrypsin in the enzymatic peptide synthesis of N-acetyl-l-tryptophan ethyl ester with glycyl glycinamide was examined in ionic liquids and organic solvents. The water content in 1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide ([emim][FSI]) affected the initial rates of peptide synthesis and hydrolysis. The activity of α-chymotrypsin was influenced by a kind of anions consisting of the same cation, [emim], when an ionic liquid was used as a solvent. The initial rate of peptide synthesis was improved 16-fold by changing from an organic solvent, acetonitrile, to an ionic liquid, [emim][FSI], at 25 °C. The activity of α-chymotrypsin in the peptide synthesis in [emim][FSI] was 17 times greater than that in acetonitrile at 60 °C, although the activity of α-chymotrypsin in the peptide synthesis gradually decreased with an increase in reaction temperature in [emim][FSI], similar to organic solvents. Moreover, α-chymotrypsin exhibited activity in [emim][FSI] and [emim][PF₆] at 80 °C.     

The study of factors affecting the enzymatic hydrolysis of cellulose after ionic liquid pretreatment

Cellulose resource has got much attention as a promising replacement of fossil fuel. The hydrolysis of cellulose is the key step to chemical product and liquid transportation fuel. In this paper a serials of chloride, acetate, and formate based ionic liquids were used as solvents to dissolve cellulose. The cellulose regenerated from ILs was characterized by FTIR and X-ray powder diffraction. From the characterization and analysis, it was found that the original close and compact structure has changed a lot. After enzymatic hydrolysis, different kinds of ionic liquids (ILs) have different yields of the reducing sugar (TRS). They are 100%, 90.72%, and 88.92% from 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), 1-butyl-3-methylimidazolium formate ([BMIM][HCOO]) respectively after enzymatic hydrolysis at 50 °C for 5 h. The results indicated that the yields and the hydrolysis rates were improved apparently after ILs pretreatment comparing with the untreated substrates.     

Obtaining high transesterification activity for subtilisin in ionic liquids

It is known that subtilisin shows poor transesterification activity in ionic liquids (ILs). The present work, taking subtilisin as the system, explores approaches for biocatalyst preparations, which are capable of yielding higher/adequate transesterification activity in these solvents. Of all the approaches tried, enzyme precipitated and rinsed with n-propanol (EPRP) gave the best results (about 10,000 times increase in initial rates in 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF(6)]) over what is obtained with pH tuned lyophilized powders). In case of water soluble ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), pH tuned lyophilized subtilisin did not show any transesterification activity. EPRP, however, gave an initial rate (for transesterification) of 2.78 mmol mg(-1) h(-1).     

Thermal Stability and Activity Regain of Horseradish Peroxidase in Aqueous Mixtures of Imidazolium-Based Ionic Liquids

Thermal deactivation kinetics of horseradish peroxidase (HRP) were studied from 45 to 90 °C in phosphate buffer and 5–25% (v,w/v) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄] and 1-butyl-3-methylimidazolium chloride [BMIM][Cl]. HRP activity at 25 °C was not affected by the presence of ionic liquids up to 20% (v,w/v). Increasing the ionic liquids concentration up to 25% (v,w/v) changed the biphasic character of deactivation kinetics to an apparent single first-order step. The presence of 5–10% (v/v) [BMIM][BF₄] significantly improved HRP thermal stability with lower activation energies for the deactivation second phase (83–87 kJ mol⁻¹). After deactivation, enhanced activity regain of the enzyme, up to 70–80% of the initial activity, was found in 25% (v/v) [BMIM][BF₄] and 10% (w/v) [BMIM][Cl] and correlated to prevalence of the deactivation first phase.