Substructure of the flagellar basal body of Salmonella typhimurium.

The Salmonella typhimurium basal body, a part of the flagellar rotary motor, consists of four rings (denoted M, S, P and L) and a coaxial rod. Using low-dose electron microscopy and image averaging methods on negatively stained and frozen-hydrated preparations, we examined whole basal body complexes and subcomplexes obtained by dissociation in acid. Dissociation occurs in steps, allowing us to obtain images of substructures lacking the M ring, lacking the M and S rings, and lacking the M and S rings and the proximal portion of the rod. We obtained images of the L and P ring subcomplex. The existence of a subcomplex missing only the M ring suggests either that the S and M rings derive from two different proteins, or that the M ring is a labile domain of a single protein, which makes up both rings. At the 25 to 30 A resolution of our averaged images, the L, P and S rings appear cylindrically symmetric. Images of the M ring show variability that may be due to differences in angular orientation of the grid, but equally could be due to structural variations. Three-dimensional reconstructions of these structures from the averaged images reveal the internal structure and spatial organization of these components.     

Role of gene flaFV on flagellar hook formation in Salmonella typhimurium.

Nine temperature-sensitive nonflagellate mutants defective in flaFV were isolated from a strain of Salmonella typhimurium. Among them three mutants were found to produce flagella with abnormally shaped (either straight or irregularly curved) hooks at the permissive temperature. Two mutations that rendered hooks straight were located in one of the eight segments of flaFV defined by deletion mapping. The mutation that rendered hooks irregularly curved was located in a different segment. An flaR mutation was introduced into the latter mutant. At the permissive temperature, the resulting double mutant produced polyhooks whose wavelength and amplitude were both exceedingly reduced. These polyhook structures were more thermolabile than those of the flaFV+ strain. Hook protein of the former strain was shown to have a slightly positive electric charge compared with that of the latter. From these results and other available information, it is inferred that flaFV is the structural gene for the hook protein in Salmonella.     

Image reconstruction of the flagellar basal body of Salmonella typhimurium

The basal body is thought to be a part of the rotary motor of the bacterial flagellum. It consists of a central rod coaxial with a set of four rings, which are associated with the cell envelope. We used single-particle averaging methods to analyze images of negatively stained basal bodies of Salmonella typhimurium. Several averages were computed, so that the reliability of features could be assessed. We carried out the same analysis on electron micrographs of isolated, negatively stained L-P rings. In order to interpret the averages in terms of a three-dimensional structure, we carried out image reconstruction on them. The resulting three-dimensional map corresponds to the cylindrically averaged structure of the basal body. To show that the reconstruction procedure is legitimate, we demonstrate it on model data. The results of the modelling show that features very near to the axis of the reconstruction are not reliable but that broader, off-axis features are represented faithfully. The L ring is L-shaped, with the long arm of the L parallel to the axis of the rod, and the short arm pointing away from the rod. The P ring, on the other hand, appears to be a ring or disk. The position of the L-P ring complex on the rod seems to vary somewhat, consistent with its putative role as a bushing. The cross-sectional shape of the S ring is that of a frustum rather than a disk. The M ring, which is oval in cross section, sits atop the S ring, making contact with it at an outer radius. The S ring appears to make contact with the rod, whereas the M ring does not. This situation, if true, is difficult to reconcile with the common notion that the S ring is stationary and the M ring rotates. It seems more likely that the S ring and rod rotate as a unit.     

Domain organization of flagellar hook protein from Salmonella typhimurium

Hook forms a universal joint, which mediates the torque of the flagellar motor to the outer helical filaments. Domain organization of hook protein from Salmonella typhimurium was investigated by exploring thermal denaturation properties of its proteolytic fragments. The most stable part of hook protein involves residues 148 to 355 and consists of two domains, as revealed by deconvolution analysis of the calorimetric melting profiles. Residues 72-147 and 356-370 form another domain, while the terminal regions of the molecule, residues 1-71 and 371-403, avoid a compact tertiary structure in the monomeric state. These folding domains were assigned to the morphological domains of hook subunits known from EM image reconstructions, revealing the overall folding of hook protein in its filamentous state.     

Roles of FliK and FlhB in determination of flagellar hook length in Salmonella typhimurium.

The length of flagellar hooks isolated from wild-type and mutant cells with various hook lengths were measured on electron micrographs. The length of the wild-type hook showed a narrow distribution with a peak (+/- standard deviation) at 55.0 +/- 5.9 nm, whereas fliK mutants (so-called polyhook mutants) showed a broad distribution of hook lengths ranging from 40 to 900 nm, strongly indicating that FliK is involved in hook length determination. Among pseudorevertants isolated from such polyhook mutants, fliK intragenic suppressors gave rise to polyhook filaments. However, intergenic suppressors mapping to flhB also gave rise to hooks of abnormal length, albeit they were much shorter than polyhooks. Furthermore, double mutations of flhB and flgK (the structural gene for hook-associated protein 1; HAP1) resulted in polyhooks, suggesting another way in which hook length can be affected. The roles of FliK, FlhB, and HAP1 in hook length determination are discussed.     

Mutations in fliK and flhB affecting flagellar hook and filament assembly in Salmonella typhimurium.

Mutations in the fliK gene of Salmonella typhimurium commonly cause failure to terminate hook assembly and initiate filament assembly (polyhook phenotype). Polyhook mutants give rise to pseudorevertants which are still defective in hook termination but have recovered the ability to assemble filament (polyhook-filament phenotype). The polyhook mutations have been found to be either frameshift or nonsense, resulting in truncation of the C terminus of FliK. Intragenic suppressors of frameshift mutations were found to be ones that restored the original frame (and therefore the C-terminal sequence), but in most cases with substantial loss of natural sequence and sometimes the introduction of artificial sequence; in no cases did intragenic suppression occur when significant disruption remained within the C-terminal region. By use of a novel PCR protocol, in-frame deletions affecting the N-terminal and central regions of FliK were constructed and the resulting phenotypes were examined. Small deletions resulted in almost normal hook length control and almost wild-type swarming. Larger deletions resulted in loss of control of hook length and poor swarming. The largest deletions severely affected filament assembly as well as hook length control. Extragenic suppressors map to an unlinked gene, flhB, which encodes an integral membrane protein (T. Hirano, S. Yamaguchi, K. Oosawa, and S.-I. Aizawa, J. Bacteriol. 176:5439-5449, 1994; K. Kutsukake, T. Minamino, and T. Yokoseki, J. Bacteriol. 176:7625-7629, 1994). They were either point mutations in the C-terminal cytoplasmic region of FlhB or frameshift or nonsense mutations close to the C terminus. The processes of hook and filament assembly and the roles of FliK and FlhB in these processes are discussed in light of these and other available data. We suggest that FliK measures hook length and, at the appropriate point, sends a signal to FlhB to switch the substrate specificity of export from hook protein to late proteins such as flagellin.     

The flaFIX gene product of Salmonella typhimurium is a flagellar basal body component with a signal peptide for export.

flaFIX, the structural gene for the periplasmic P ring of the flagellar basal body of Salmonella typhimurium, was cloned. Two gene products with apparent molecular weights of 38,000 and 40,000 were identified by minicell analysis. Data from pulse-chase and membrane fractionation experiments and data on the inhibitory effect of the proton ionophore carbonyl cyanide m-chlorophenylhydrazone all indicated that the 40-kilodalton protein was a precursor form which, after export across the cytoplasmic membrane accompanied by cleavage of a signal peptide, gave rise to the mature protein in the periplasm. The N-terminal amino acid sequence of the FlaFIX protein, predicted from the DNA sequence, conformed well to known signal peptide sequences. The results indicate that the P-ring protein of the basal body (unlike flagellin and possible some other external flagellar components) crosses the cytoplasmic membrane in a conventional signal peptide-dependent manner.     

FlgD is a scaffolding protein needed for flagellar hook assembly in Salmonella typhimurium.

FlgD is known to be absolutely required for hook assembly, yet it has not been detected in the mature flagellum. We have overproduced and purified FlgD and raised an antibody against it. By using this antibody, we have detected FlgD in substantial amounts in isolated basal bodies from flgA, flgE, flgH, flgI, flgK, and fliK mutants, in much smaller amounts in those from the wild type and flgL, fliA, fliC, fliD, and fliE mutants, and not at all in those from flgB, flgD, flgG, and flgJ mutants. In terms of the morphological assembly pathway, these results indicate that FlgD is first added to the structure when the rod is completed and is discarded when the hook, having reached its mature length, has the first of the hook-filament junction proteins, FlgK, added to its tip. Immunoelectron microscopy established that FlgD initially is located at the distal end of the rod and eventually is located at the distal end of the hook. Thus, it appears to act as a hook-capping protein to enable assembly of hook protein subunits, much as another flagellar protein, FliD, does for the flagellin subunits of the filament. However, whereas FliD is associated with the filament tip indefinitely, FlgD is only transiently associated with the hook tip; i.e., it acts as a scaffolding protein. When FlgD was added to the culture medium of a flgD mutant, cells gained motility; thus, although the hook cap is normally added endogenously, it can be added exogenously. When culture media were analyzed for the presence of hook protein, it was found only with the flgD mutant and, in smaller amounts, the fliK (polyhook) mutant. Thus, although FlgD is needed for assembly of hook protein, it is not needed for its export.     

FlgB, FlgC, FlgF and FlgG. A family of structurally related proteins in the flagellar basal body of Salmonella typhimurium

The flagellar basal body of Salmonella typhimurium consists of four rings surrounding a rod. The rod, which is believed to transmit motor rotation to the filament, is not well characterized in terms of its structure and composition. FlgG is known to lie within the distal portion of the rod, in the region where it is surrounded by the L and P rings, just before the rod-hook junction. The FlgC and FlgF proteins are also known to be flagellar basal-body components; by comparison of deduced and experimental N-terminal amino acid sequences we show here that FlgB is a basal-body protein. The flgB, flgC, flgF and flgG gene sequences and the deduced protein sequences are presented. The four proteins are clearly related to each other in primary sequence, especially toward the N and C termini, supporting the hypothesis (based on examination of basal-body subfractions) that FlgB, FlgC and FlgF are, like FlgG, rod proteins. From this and other information we suggest that the rod is the cell-proximal part of a segmented axial structure of the flagellum, with FlgB, FlgC and FlgF located (in unknown order) in successive segments of the proximal rod, followed by FlgG located in the distal rod; the axial structure then continues with the hook, HAPs and filament. Although the rod is external to the cell membrane, none of the four rod proteins contains a consensus signal sequence for the primary export pathway; comparison with the experimentally determined N-terminal amino acid sequence indicates that FlgB has had its N-terminal methionine removed, while the other three are not processed at all. This demonstrates that these proteins are not exported by the primary cellular pathway, and suggests that they are exported by the same flagellum-specific pathway as the flagellar filament protein flagellin. The observed sequence similarities among the rod proteins, especially a six-residue consensus motif about 30 residues in from the N terminus, may constitute a recognition signal for this pathway or they may reflect higher-order structural similarities within the rod.     

FliG and FliM distribution in the Salmonella typhimurium cell and flagellar basal bodies.

Salmonella typhimurium FliG and FliM are two of three proteins known to be necessary for flagellar morphogenesis as well as energization and switching of flagellar rotation. We have determined FliG and FliM levels in cellular fractions and in extended flagellar basal bodies, using antibodies raised against the purified proteins. Both proteins were found predominantly in the detergent-solubilized particulate fraction containing flagellar structures. Basal flagellar fragments could be separated from partially constructed basal bodies by gel filtration chromatography. FliG and FliM were present in an approximately equimolar ration in all gel-filtered fractions. FliG and FliM copy numbers, estimated relative to that of the hook protein from the early fractions containing long, basal, flagellar fragments, were (means +/- standard errors) 41 +/- 10 and 37 +/- 13 per flagellum, respectively. Extended structures were present in the earliest identifiable basal bodies. Immunoelectron microscopy and immunoblot gel analysis suggested that the FliG and, to a less certain degree, the FliM contents of these structures were the same as those for the complete basal bodies. These facts are consistent with the postulate that FliG and FliM affect flagellar morphogenesis as part of the extended basal structure, formation of which is necessary for assembly of more-distal components of the flagellum. The determined stoichiometries will provide important constraints to modelling energization and switching of flagellar rotation.     

Identification and characterization of the products of six region III flagellar genes (flaAII.3 through flaQII) of Salmonella typhimurium.

A portion of flagellar region III of the Salmonella typhimurium genome has been cloned and shown to contain six genes: flaAII.3, flaAIII, flaS, flaR, flaQI, and flaQII. Of these, all but flaQI were known to exist from mutant studies; the former flaQ has been renamed flaQII. The genes were shown by minicell analysis to encode proteins with apparent molecular masses of 28, 48, 15, 46, 17, and 37 kilodaltons, respectively. The presence of a flagellar-gene-specific promoter in the vicinity of flaQI was established by testing expression of the plasmid-encoded tetracycline resistance gene in artificial constructions. In minicell preparations, the flaAII.3 and flaR products were found principally in the cytoplasmic fraction; the rest were found principally in the membrane fraction. A comparison between the homologous genes of S. typhimurium and Escherichia coli confirmed that their genomic organizations were similar and that their products had similar molecular masses and isoelectric points.     

Characterization of the flagellar hook length control protein fliK of Salmonella typhimurium and Escherichia coli.

During flagellar morphogenesis in Salmonella typhimurium and Escherichia coli, the fliK gene product is responsible for hook length control. A previous study (M. Homma, T. Iino, and R. M. Macnab, J. Bacteriol. 170:2221-2228, 1988) had suggested that the fliK gene may generate two products; we have confirmed that both proteins are products of the fliK gene and have eliminated several possible explanations for the two forms. We have determined the DNA sequence of the fliK gene in both bacterial species. The deduced amino acid sequences of the wild-type FliK proteins of S. typhimurium and E. coli correspond to molecular masses of 41,748 and 39,246 Da, respectively, and are fairly hydrophilic. Alignment of the sequences gives an identity level of 50%, which is low for homologous flagellar proteins from S. typhimurium and E. coli; the C-terminal sequence is the most highly conserved part (71% identity in the last 154 amino acids). The central and C-terminal regions are rich in proline and glutamine residues, respectively. Linker insertion mutagenesis of the conserved C-terminal region completely abolished motility, whereas disruption of the less conserved N-terminal and central regions had little or no effect. We suggest that the N-terminal (or N-terminal and central) and C-terminal regions may constitute domains. For several reasons, we consider it unlikely that FliK is functioning as a molecular ruler for determining hook length and conclude that it is probably employing a novel mechanism.     

Role of the flaR gene in flagellar hook formation in Salmonella spp.

Flagellar filaments were reconstituted by polymerization with exogenously supplied flagellin monomers at the tips of normal hooks on Salmonella cells which were missing the filaments because of mutations in either the flaL or flaU gene or the flagellin genes H1 and H2. Reconstitution did not occur at the tips of polyhooks of the flaR mutant cells. Thus, the absence of flagellar filaments in the flaR mutant cells was probably caused by the inability of the polyhooks to work as polymerization nuclei for flagellin. A Phf+ mutant which produced polyhooks with flagellar filaments was isolated from a flaR polyhook mutant. Genetic analysis of the Phf+ mutant showed that it carried an intracistronic suppressor mutation of the original flaR mutation. This result indicated that the flaR gene regulates hook length and initiates flagellin formation.     

Purification and characterization of the flagellar hook-basal body complex of Salmonella typhimurium.

The hook-basal body complex of Salmonella typhimurium, a major component of its flagellar apparatus, was subjected to detailed analysis by electron microscopy and gel electrophoresis. The study was facilitated by the development of an improved protocol for isolation of the complexes in high yield and purity. Nine proteins were identified with the structure. These proteins had apparent molecular weights of 65,000 (65K), 60K, 42K, 38K, 32K, 30K, 27K, 16K, and 14K. Small but reproducible shifts in the apparent molecular weights of specific proteins from conditionally nonflagellate mutants indicated the following gene-polypeptide correspondences: flaFV, 42K; flaFVI, 32K; flaFVII, 30K; flaFIX, 38K; flaAII.1, 65K. Several new morphological features of hook-basal body complexes were recognized, including a clawlike structure on the cytoplasm-proximal M ring and additional material at the cytoplasmic face of the M ring. Based on this study and the work of others, we suggest that the morphological features of the hook-basal body complex correspond to the following proteins: hook-filament junction, 60K; hook, 42K; rod, 30K and 32K; L ring and outer cylinder wall, 27K; P ring, 38K; S ring, unknown; M ring 65K.     

The FliP and FliR proteins of Salmonella typhimurium, putative components of the type III flagellar export apparatus, are located in the flagellar basal body

Most of the structural components of the flagellum of Salmonella typhimurium are exported through a flagellum-specific pathway, which is a member of the family of type III secretory pathways. The export apparatus for this process is poorly understood. A previous study has shown that two proteins, about 23 and 26 kDa in size and of unknown genetic origin, are incorporated into the flagellar basal body at a very early stage of flagellar assembly. In the present study, we demonstrate that these basal body proteins are FliP (in its mature form after signal peptide cleavage) and FliR respectively. Both of these proteins have homologues in other type III secretion systems. By placing a FLAG epitope tag on FliR and the MS-ring protein FliF and immunoblotting isolated hook basal body complexes with anti-FLAG monoclonal antibody, we estimate (using the FLAG-tagged FliF as an internal reference) that the stoichiometry of FliR is fewer than three copies per basal body. An independent estimate of stoichiometry was made using data from an earlier quantitative radiolabelling analysis, yielding values of around four or five subunits per basal body for FliP and around one subunit per basal body for FliR. Immunoelectron microscopy using anti-FLAG antibody and gold–protein A suggests that FliR is located near the MS ring. We propose that the flagellar export apparatus contains FliP and FliR and that this apparatus is embedded in a patch of membrane in the central pore of the MS ring.     

Release of flagellar filament-hook-rod complex by a Salmonella typhimurium mutant defective in the M ring of the basal body.

A Salmonella typhimurium strain possessing a mutation in the fliF gene (coding for the component protein of the M ring of the flagellar basal body) swarmed poorly on a semisolid plate. However, cells grown in liquid medium swam normally and did not show any differences from wild-type cells in terms of swimming speed or tumbling frequency. When mutant cells were grown in a viscous medium, detached bundles of flagellar filaments as long as 100 microns were formed and the cells had impaired motility. Electron microscopy and immunoelectron microscopy revealed that the filaments released from the cells had the hook and a part of the rod of the flagellar basal body still attached. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and two-dimensional gel electrophoresis showed that the rod portion of the released structures consisted of the 30-kilodalton FlgG protein. Double mutants containing this fliF mutation and various che mutations were constructed, and their behavior in viscous media was analyzed. When the flagellar rotation of the mutants was strongly biased to either a counterclockwise or a clockwise direction, detached bundles were not formed. The formation of large bundles was most extreme in mutants weakly biased to clockwise rotation.