Effect of folding factors in rescuing unstable heterologous lipase B to enhance its overexpression in the periplasm of Escherichia coli

Functional expression of recombinant Pseudozyma antarctica lipase B (PalB) in Escherichia coli was explored. While PalB was stably expressed in the cytoplasm, most of the expressed gene product aggregated in cells as inactive inclusion bodies. In contrast, PalB was extremely unstable when expressed in the periplasm, also leading to poor expression performance. Such unstable PalB can be rescued by coexpression of several periplasmic folding factors, such as DegP, FkpA, DsbA, and DsbC but not cytoplasmic ones. As a result, the performance for functional PalB expression in the periplasm was significantly improved. To our knowledge, this is the first report demonstrating the use of folding factors to rescue the extremely unstable gene product that is otherwise completely degradable.     

Disulfide bond formation and its impact on the biological activity and stability of recombinant therapeutic proteins produced by Escherichia coli expression system

Therapeutic proteins require correct disulfide bond formation for biological activity and stability. This makes their manufacturing and storage inherently challenging since disulfide bonds can be aberrantly formed and/or undergo significant structural changes. In this paper the mechanisms of disulfide bond formation and scrambling are reviewed, with a focus on their impact on the biological activity and storage stability of recombinant proteins. After assessing the research progress in detecting disulfide bond scrambling, strategies for preventing this phenomenon are proposed.     

Ethylene formation by cultures of Escherichia coli

Growth of Escherichia coli strain B SPAO on a medium containing glucose, NH₄Cl and methionine resulted in production of ethylene into the culture headspace. When methionine was excluded from the medium there was little formation of ethylene. Ethylene formation in methionine-containing medium occurred for a brief period at the end of exponential growth. Ethylene formation was stimulated by increasing the medium concentration of Fe³⁺ when it was chelated to EDTA. Lowering the medium phosphate concentration also appeared to stimulate ethylene formation. Ethylene formation was inhibited in cultures where NH₄Cl remained in the stationary phase. Synthesis of the ethylene-forming enzyme system was determined by harvesting bacteria at various stages of growth and assaying the capacity of the bacteria to form ethylene from methionine. Ethylene forming capacity was greatest in cultures harvested immediately before and during the period of optimal ethylene formation. It is concluded that ethylene production by E. coli exhibits the typical properties of secondary metabolism.Abbreviations HMBA 2-Hydroxy-4-methylthiobutyric acid (methionine hydroxy analogue) - KMBA 2-keto-4-methylthiobutyric acid - MOPS 3-[N-morpholino] propanesulphonic acid     

Expression, purification, and biochemical characterization of enteroaggregative Escherichia coli heat-stable enterotoxin 1

Enteroaggregative Escherichia coli (EAEC) heat-stable enterotoxin 1 (EAST1) is a 4.1k Da protein originally discovered in EAEC but known to be scattered in other diarrheagenic E. coli as well, possibly causing diarrhea in humans and animals. We report for the first time a method to express and purify EAST1 using the Glutathione S-transferase (GST) fusion system. The gst and astA genes were fused together on a pGEX-2T plasmid vector to produce a GST-EAST1 fusion protein. Using Glutathione Sepharose affinity chromatography and C(8) reverse phase high pressure liquid chromatography, EAST1 was purified to homogeneity with a yield of 0.29 mg/L of culture. The protein purified by this method was confirmed to be EAST1 by NH(2)-terminal sequencing and mass spectrometry. The molecular weight of EAST1 is 4104.0 Da, confirming a 38 amino acid peptide as predicted by the astA gene sequence. Mass spectrometry analysis of EAST1 and of two generated peptides established the presence and suggested the position of two disulfide bridges of EAST1 in the conformations C1-C2 and C3-C4. Polyclonal antibodies were raised against EAST1 in New Zealand white rabbits to a titer of 1:8000 using affinity-purified GST-EAST1 fusion protein and to a titer of 1:100 using HPLC-purified EAST1. The biological activity of various EAST1 preparations was tested using the suckling mouse assay with CD-1 and CFW mice strains, but failed to produce fluid accumulation in the intestine.     

Enhancing functional expression of heterologous lipase in the periplasm of <Emphasis Type="Italic">Escherichia</Emphasis><Emphasis Type="Bold"> </Emphasis><Emphasis Type="Italic">coli</Emphasis>

Functional expression of heterologous Pseudozyma antarctica lipase B (PalB) in the periplasm of Escherichia coli was explored using four fusion tags, i.e. DsbC, DsbA, maltose-binding protein (MBP), and FLAG in the sequence of increasing expression efficacy. Amongst these fusion tags, FLAG and MBP appear to be the most effective ones in terms of boosting enzyme activity and enhancing solubility of PalB, respectively. Overexpression of these PalB fusions often resulted in concomitant formation of insoluble inclusion bodies. Coexpression of a selection of periplasmic folding factors, including DegP (and its mutant variant of DegP_S210A), FkpA, DsbA, DsbC, and a cocktail of SurA, FkpA, DsbA, and DsbC, could improve the expression performance. Coexpression of DsbA appeared to be the most effective in reducing the formation of inclusion bodies for all the four PalB fusions, implying that functional expression of PalB could be limited by initial bridging of disulfide bonds. Culture performance was optimized by overexpressing FLAG-PalB with DsbA coexpression, resulting in a high volumetric PalB activity of 360 U/L.     

Extracellular production of active vibriolysin engineered by random mutagenesis in Escherichia coli

Vibriolysin, an extracellular protease of Vibrio proteolyticus, is synthesized as a preproenzyme. The N-terminal propeptide functions as an intramolecular chaperone and an inhibitor of the mature enzyme. Extracellular production of recombinant vibriolysin has been achieved in Bacillus subtilis, but not in Escherichia coli, which is widely used as a host for the production of recombinant proteins. Vibriolysin is expressed as an inactive form in E. coli possibly due to the inhibitory effect of the N-terminal propeptide. In this study, we isolated the novel vibriolysin engineered by in vivo random mutagenesis, which is expressed as active mature vibriolysin in E. coli. The Western blot analysis showed that the N-terminal propeptide of the engineered enzyme was processed and degraded, confirming that the propeptide inhibits the mature enzyme. Two mutations located within the engineered vibriolysin resulted in the substitution of stop codon for Trp at position 11 in the signal peptide and of Val for Ala at position 183 in the N-terminal propeptide (where position 1 is defined as the first methionine). It was found that the individual mutations are related to the enzyme activity. The novel vibriolysin was extracellularly overproduced in BL21(DE3) and purified from the culture supernatant by ion-exchange chromatography followed by hydrophobic-interaction chromatography, resulting in an overall yield of 2.2 mg/L of purified protein. This suggests that the novel engineered vibriolysin is useful for overproduction in an E. coli expression system.     

High-level expression and purification of Escherichia coli oligopeptidase B

Oligopeptidase B (OpdB) of Escherichia coli, previously called protease II, has a trypsin-like specificity, cleaving peptides at lysine and arginine residues and belongs to the prolyl oligopeptidase family of new serine peptidases. In this study, we report the fusion expression of E. coli oligopeptidase B with an N-terminal histidine tag using pET28a as the expression vector. Although most of the recombinant OpdB was produced as inclusion bodies, the solubility of the recombinant protease increased significantly when the expression temperature shifted from 37 to 30 degrees C. Recombinant OpdB (approximately 10 mg) could be purified from the soluble fraction of the crude extract of 1L log-phase E. coli culture containing 1.5 g wet bacterial cells. The purified OpdB has a molecular weight of approximately 80 kDa and a specific activity of 4.8 x 10(4) U/mg. OpdB could also be purified from the inclusion bodies with a lower yield. The recombinant enzyme was very stable under 40 degrees C. By comparison of the substrate specificity of the purified OpdB with that of OpdA, another trypsin-like protease in E. coli, we found that Boc-Glu-Lys-Lys-MCA is a specific substrate for E. coli OpdB. We also found that compared to OpdA, OpdB is much more sensitive to GMCHA-OPh(t)Bu, a synthetic trypsin inhibitor that can retard the growth of E. coli.     

Mutations affecting pore formation by haemolysin from Escherichia coli

Summary By introduction of site-specific deletions, three regions in HlyA were identified, which appear to be involved in pore formation by Escherichia coli haemolysin. Deletion of amino acids 9–37 at the N-terminus led to a haemolysin which had an almost threefold higher specific activity than wild-type and formed pores in an artificial asolectin lipid bilayer with a much longer lifetime than those produced by wild-type haemolysin. The three hydrophobic regions (DI–DIII) located between amino acids 238–410 contributed to pore formation to different extents. Deletion of DI led to a mutant haemolysin which was only slightly active on erythrocyte membranes and increased conductivity of asolectin bilayers without forming defined pores. Deletions in the two other hydrophobic regions (DII and DIII) completely abolished the pore-forming activity of the mutant haemolysin. The only polar amino acid in DI, Asp, was shown to be essential for pore formation. Removal of this residue led to a haemolysin with a considerably reduced capacity to form pores, while replacement of Asp by Glu or Asn had little effect on pore formation. A deletion mutant which retained all three hydrophobic domains but had lost amino acids 498–830 was entirely inactive in pore formation, whereas a shorter deletion from amino acids 670–830 led to a mutant haemolysin which formed abnormal minipores. The conductivity of these pores was drastically reduced compared to pores introduced into an asolectin bilayer by wild-type haemolysin. Based on these data and structural predictions, a model for the pore-forming structure of E. coli haemolysin is proposed.     

Role of the calcium ion and the disulfide bond in the Burkholderia glumae lipase

The role of the Ca²⁺ ion that is present in the structure of Burkholderia glumae lipase was investigated. Previously, we demonstrated that the denatured lipase could be refolded in vitro into an active enzyme in the absence of calcium. Thus, an essential role for the ion in catalytic activity or in protein folding can be excluded. Therefore, a possible role of the Ca²⁺ ion in stabilizing the enzyme was considered. Chelation of the Ca²⁺ ion by EDTA severely reduced the enzyme activity and increased its protease sensitivity, however, only at elevated temperatures. Furthermore, EDTA induced unfolding of the lipase in the presence of urea. From these results, it appeared that the Ca²⁺ ion in B. glumae lipase fulfils a structural role by stabilizing the enzyme under denaturing conditions. In contrast, calcium appears to play an additional role in the Pseudomonas aeruginosa lipase, since, unlike B. glumae lipase, in vitro refolding of this enzyme was strictly dependent on calcium. Besides the role of the Ca²⁺ ion, also the role of the disulfide bond in B. glumae lipase was studied. Incubation of the native enzyme with dithiothreitol reduced the enzyme activity and increased its protease sensitivity at elevated temperatures. Therefore, the disulfide bond, like calcium, appears to stabilize the enzyme under detrimental conditions.     

Efficient production of active Vibrio proteolyticus aminopeptidase in Escherichia coli by co-expression with engineered vibriolysin

The Vibrio proteolyticus aminopeptidase is synthesized as a preproprotein and then converted into an active enzyme by cleavage of the N-terminal propeptide. In recombinant Escherichia coli, however, the aminopeptidase is not processed correctly and the less-active form that has the N-terminal propeptide accumulates in the culture medium. Recently, we isolated a novel vibriolysin that was expressed as an active form in E. coli by random mutagenesis; this enzyme shows potential as a candidate enzyme for the processing of aminopeptidase. The E. coli cells were engineered to co-express the novel vibriolysin along with aminopeptidase. Co-expression of vibriolysin resulted in an approximately 13-fold increase in aminopeptidase activity, and a further increase was observed in the form lacking its C-terminal propeptide. The active aminopeptidase was purified from the culture supernatant including the recombinant vibriolysin by heat treatment and ion exchange and hydroxyapatite chromatography with high purity and 35% recovery rate. This purified aminopeptidase effectively converted methionyl-human growth hormone (Met-hGH) to hGH. Thus, this co-expression system provides an efficient method for producing active recombinant V. proteolyticus aminopeptidase.     

The folding process of acylphosphatase from Escherichia coli is remarkably accelerated by the presence of a disulfide bond

The acylphosphatase from Escherichia coli (EcoAcP) is the first AcP so far studied with a disulfide bond. A mutational variant of the enzyme lacking the disulfide bond has been produced by substituting the two cysteine residues with alanine (EcoAcP mutational variant C5A/C49A, mutEcoAcP). The native states of the two protein variants are similar, as shown by far-UV and near-UV circular dichroism and dynamic light-scattering measurements. From unfolding experiments at equilibrium using intrinsic fluorescence and far-UV circular dichroism as probes, EcoAcP shows an increased conformational stability as compared with mutEcoAcP. The wild-type protein folds according to a two-state model with a very fast rate constant (k_F^H2O = 72,600 s^− 1), while mutEcoAcP folds ca 1500-fold slower, via the accumulation of a partially folded species. The correlation between the hydrophobicity of the polypeptide chain and the folding rate, found previously in the AcP-like structural family, is maintained only when considering the mutant but not the wild-type protein, which folds much faster than expected from this correlation. Similarly, the correlation between the relative contact order and the folding rate holds only for mutEcoAcP. The correlation also holds for EcoAcP, provided the relative contact order value is recalculated by considering the disulfide bridge as an alternate path for the backbone to determine the shortest sequence separation between contacting residues. These results indicate that the presence of a disulfide bond in a protein is an important determinant of the folding rate and allows its contribution to be determined in quantitative terms.     

Using a kinetic model that considers cell segregation to optimize hEGF expression in fed-batch cultures of recombinant Escherichia coli

Growth inhibition of recombinant Escherichia coli during the expression of human epidermal growth factor was observed. The recombinant cells could be segregated into three populations based on their cell division and plasmid maintenance abilities: dividing and plasmid-bearing cells, dividing and plasmid-free cells, and viable-but-non-culturable (VBNC) cells. Fed-batch fermentations were performed to investigate the effect of cell segregation on the kinetics of growth and foreign protein production. The results showed that a low concentration of inducer caused weak induction, whereas high levels cause strong induction, resulting in cells segregating into VBNC bacteria and producing a low foreign protein yield. A kinetic model for cell segregation was proposed and its predictions correlated well with experimental data for cell growth and protein expression. The optimal induction strategy could then be predicted by the model, and this prediction was then verified by experimentally deriving the conditions necessary for maximum expression of recombinant protein.     

Heterologous expression of bacterial and human multidrug resistance proteins protect Escherichia coli against mercury and zinc contamination

In order to determine the role of multidrug resistance proteins in mercury and zinc resistance, human MDR1, Lactococcus lactis lmrA, and Oenococcus oeni omrA genes were expressed in an Escherichia coli tolC mutant which is hypersensitive to metals. The three transporters conferred an increased mercury and zinc resistance to E. coli as compared to the control bacteria. This improved resistance correlated with a decreased zinc and mercury bioaccumulation. Indeed, quantification of intracellular metal concentrations by atomic absorption spectrometry (AAS) showed a 2.1-, 3-, and 5.1-fold decrease in zinc in cells expressing hMDR1, omrA, and lmrA, respectively, and a 2.7-, 7.5-, and 7.7-fold decrease in mercury in cells expressing omrA, lmrA, and hMDR1, respectively, as compared to the control bacteria. This means that hMDR1, LmrA, and OmrA proteins which are specialised in xenobiotic scavenging, their main known function, are nevertheless able to confer some resistance against metals. Our results show that the tolC mutated strain is well adapted to the study of MDR transporter activity and could be used to screen substrates and competitive hMDR1 inhibitors.     

Expression and purification of human tryptophan hydroxylase from Escherichia coli and Pichia pastoris

Tryptophan hydroxylase (TPH) from several mammalian species has previously been cloned and expressed in bacteria. However, due to the instability of wild type TPH, most successful attempts have been limited to the truncated forms of this enzyme. We have expressed full-length human TPH in large amounts in Escherichia coli and Pichia pastoris and purified the enzyme using new purification protocols. When expressed as a fusion protein in E. coli, the maltose-binding protein-TPH (MBP-TPH) fusion protein was more soluble than native TPH and the other fusion proteins and had a 3-fold higher specific activity than the His-Patch-thioredoxin-TPH and 6xHis-TPH fusion proteins. The purified MBP-TPH had a V(max) of 296 nmol/min/mg and a K(m) for L-tryptophan of 7.5+/-0.7 microM, compared to 18+/-5 microM for the partially purified enzyme from P. pastoris. To overcome the unfavorable properties of TPH, the stabilizing effect of different agents was investigated. Both tryptophan and glycerol had a stabilizing effect, whereas dithiothreitol, (6R)-5,6,7,8,-tetrahydrobiopterin, and Fe(2+) inactivated the enzyme. Irrespective of expression conditions, both native TPH expressed in bacteria or yeast, or TPH fusion proteins expressed in bacteria exhibited a strong tendency to aggregate and precipitate during purification, indicating that this is an intrinsic property of this enzyme. This supports previous observations that the enzyme in vivo may be stabilized by additional interactions.     

Ethylene formation by cell-free extracts of Escherichia coli

The pathway leading to the formation of ethylene as a secondary metabolite from methionine by Escherichia coli strain B SPAO has been investigated. Methionine was converted to 2-oxo-4-methylthiobutyric acid (KMBA) by a soluble transaminase enzyme. 2-Hydroxy-4-methylthiobutyric acid (HMBA) was also a product, but is probably not an intermediate in the ethylene-forming pathway. KMBA was converted to ethylene, methanethiol and probably carbon dioxide by a soluble enzyme system requiring the presence of NAD(P)H, Fe³⁺ chelated to EDTA, and oxygen. In the absence of added NAD(P)H, ethylene formation by cell-free extracts from KMBA was stimulated by glucose. The transaminase enzyme may allow the amino group to be salvaged from methionine as a source of nitrogen for growth. As in the plant system, ethylene produced by E. coli was derived from the C-3 and C-4 atoms of methionine, but the pathway of formation was different. It seems possible that ethylene production by bacteria might generally occur via the route seen in E. coli.Abbreviations EDTA ethylenediaminetetraacetic acid - HMBA 2-hydroxy-4-methylthiobutyric acid (methionine hydroxy analogue) - HSS high speed supernatant - KMBA 2-oxo-4-methylthiobutyric acid - PCS phase combining system     

Heterologous expression of functionally active enterolysin A, class III bacteriocin from Enterococcus faecalis, in Escherichia coli

The heterologous expression of enterolysin A (EnlA), heat-labile class III bacteriocin from Enterococcus faecalis II/1 with anti-listerial activity, was studied in Escherichia coli. The PCR amplified products of enterolysin A structural gene, N-terminal part of EnlA with endopeptidase-like activity and C-terminal part of EnlA similar to a lysis gene of bacteriophage, were cloned in prelinearized pQE-30UA expression vector. The expression of EnlA structural gene led to the synthesis and secretion of functional-active His-tagged enterolysin A protein, which was purified to homogeneity using His-Select™ Cartridge and was shown to be fully active against the indicator strain. The expression of N-terminal or C-terminal part of EnlA and deletion of last 58 amino acids from C-terminal domain of EnlA led to the synthesis of biologically non-active proteins.     

Plasmid amplification in Escherichia coli after temperature upshift is impaired by induction of recombinant protein synthesis

Production of recombinant proteins often interferes with the physiology of the host organism by causing stress responses. In recombinant Escherichia coli, the cellular content of ColE1-derived plasmids and, consequently, the synthesis of the constitutively synthesized plasmid-encoded proteins generally increases after a temperature upshift. Simultaneous induction of inducible recombinant proteins that are synthesized at high levels and tend to form inclusion bodies, however, attenuates the plasmid amplification. This phenomenon was observed using temperature- as well as IPTG-inducible expression systems. Thus, high-level recombinant gene expression in connection with inclusion body formation does not only interfere with host cell but also with plasmid-related functions.     

Heterologous protein production in Escherichia coli using the propionate-inducible pPro system by conventional and auto-induction methods

We examined expression of two plant genes encoding coclaurine N-methyltransferase (CMT) and norcoclaurine synthase (NCS) in Escherichia coli from the Salmonella enterica prpBCDE promoter (P_prpB) and compared it to that from the strongest IPTG-inducible promoter, P_T7. In contrast to our previous study showing slightly higher production of green fluorescent protein (GFP) from the pPro system compared to that from the T7 system, production of two plant proteins CMT and NCS from P_prpB was 2- to 4-fold higher than that from P_T7. Unlike P_T7, expression from P_prpB did not reduce cell growth even when highly induced, indicating that this propionate-inducible system is more efficient for overproduction of proteins that result in growth inhibition. In an auto-induction experiment, which does not require monitoring the culture or adding inducer during cell growth, the pPro system exhibited much higher protein production than the T7 system. These results strongly indicate that the pPro system is well-suited for overproduction of recombinant proteins.     

A two-stage refinement approach for the enhancement of excretory production of an exoglucanase from Escherichia coli

Hyper-expression of a secretory exoglucanase, Exg, encoded by the cex gene of Cellulomonas fimi was previously shown to saturate the SecYEG pathway and result in dramatic cell death of recombinant Escherichia coli (Z.B. Fu, K.L. Ng, T.L. Lam, W.K.R. Wong, Cell death caused by hyper-expression of a secretory exoglucanase in Esherichia coli, Protein Expr. Purif. 42 (2005) 67-77). We propose here that the cell lysate ratio (Pre/Mat RQ) of the unprocessed precursor Exg protein (Pre-Exg) and its processed mature product (Mat-Exg) reflects the capacity of E. coli to secrete Exg. A Pre/Mat RQ of 20/80, designated the "Critical Value," was an important threshold measurement. A rise in the Pre/Mat RQ triggered a mass killing effect. The use of various secretion signal peptides did not improve the viability of cells expressing high levels of Pre-Exg under strong tac promoter control. However, use of the weaker vegG promoter in conjunction with a change in start codon of the spa leader sequence from ATG to TTG in a pM1vegGcexL plasmid construct resulted in a high level (0.9 U ml(-1)) of excreted Exg in shake-flask cultures. This was 50% higher than the best result obtained from plasmid construct lacUV5par8cex, using the lacUV5 promoter and the ompA leader sequence. Variations in the excreted Exg activities were attributable to differences in the Pre/Mat RQ values of the induced cultures harboring pM1vegGcexL and lacUV5par8cex. These values were 18/82 and 10/90, respectively. Employing fed-batch cultivation in two-liter fermentors, an induced JM101(pM1vegGcexL) culture yielded 4.5 U ml(-1) of excreted Exg, which was over six fold greater that previously reported. Our results illustrate the successful application of the Pre/Mat RQ ratio as a guide to the attainment of a maximum level of secreted/excreted Exg.     

Maltose binding protein facilitates high-level expression and functional purification of the chemokines RANTES and SDF-1alpha from Escherichia coli

The chemokines RANTES (regulated on activation, normal T cell expressed and secreted) and SDF-1α (stromal cell-derived factor-1α) are important regulators of leukocyte trafficking and homing. Chemokines form insoluble inclusion bodies when expressed in Escherichia coli (E. coli), resulting in low yields of soluble protein. We have developed a novel chemokine expression system that generates a high amount of soluble protein and uses a simple purification scheme. We cloned different types of RANTES and SDF-1α fused to either maltose binding protein (MBP) or glutathione-S-transferase (GST) and expressed the fusion proteins in E. coli under various conditions. We found that the yield of soluble chemokine is influenced by the type of fusion partner. Fusion to MBP resulted in a higher yield of total and soluble chemokine compared to GST. Under optimized conditions, the yield of soluble MBP–RANTES and MBP–SDF-1α was 2.5- and 4.5-fold higher than that of the corresponding GST-fusion protein, respectively. Recombinant chemokine fusion proteins exhibited specific binding activity to chemokine receptors. These results demonstrate that the use of MBP-fusion proteins may provide an approach to generating high yields of soluble and functional chemokines, such as RANTES and SDF-1α.