Immobilized-type chiral packing materials for HPLC based on polysaccharide derivatives

The polysaccharide-based chiral packing materials (CPMs) for high-performance liquid chromatography (HPLC) have been recognized as the most powerful ones for the analyzing and preparative separating of the chiral compounds. These CPMs have been conventionally prepared by coating polysaccharide derivatives on a silica gel support. This means that the solvents, which swell or dissolve the derivatives on the silica gel and reduce the performance of the chiral columns, do not allow to be applied as components of the eluents. Therefore, the polysaccharide-based CPMs can be used with a rather limited number of eluents. In order to enhance the versatility of the eluent selection for more practical and economical chromatographic enantioseparations, the polysaccharide derivatives must be immobilized onto the silica gel. This review summarizes our latest studies on the development of the immobilized-type CPMs via the radical copolymerization and the polycondensation of the polysaccharide derivatives bearing small amounts of vinyl groups and alkoxysilyl groups, respectively.     

Immobilization and chiral recognition of 3,5‐dimethylphenylcarbamates of cellulose and amylose bearing 4‐(trimethoxysilyl)phenylcarbamate groups

A small amount of 4‐(trimethoxysilyl)phenyl groups was randomly introduced onto the 3,5‐dimethylphenylcarbamates of cellulose and amylose by a one‐pot method. The obtained derivatives were then effectively immobilized onto silica gel as chiral packing materials (CPMs) for high‐performance liquid chromatography through intermolecular polycondensation of the trimethoxysilyl groups. The effects of the amount of 4‐(trimethoxysilyl)phenyl groups on immobilization and enantioseparation were investigated. Also, the solvent durability of the immobilized‐type CPMs was examined with the eluents containing chloroform and tetrahydrofuran. When these eluents were used, the chiral recognition abilities of the CPMs for most of the tested racemates were improved to some extent depending on the compounds. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Immobilization and chromatographic evaluation of novel regioselectively substituted amylose‐based chiral packing materials for HPLC

The regioselectively substituted amylose derivatives bearing a 4‐tert‐butylbenzoate or 4‐chlorobenzoate group at 2‐position, and 3,5‐dichlorophenylcarbamate and a small amount of 3‐(triethoxysilyl)propylcarbamate groups at 3‐ and 6‐positions were synthesized by a two‐step process based on the esterification of 2‐position of a glucose unit. The obtained derivatives were effectively immobilized onto macroporous silica gel by intermolecular polycondensation of triethoxysilyl groups. Their chiral recognition abilities were evaluated as chiral packing materials (CPMs) for high‐performance liquid chromatography. These CPMs showed high chiral recognition as well as the conventional coated‐type CPM, and can be used with the eluents‐containing chloroform and tetrahydrofuran. With the extended use of these eluents, improvement of chiral recognition and reversed elution orders were realized. For some racemates, the immobilized CPM exhibited ability comparable or better to the commercial immobilized amylose‐ or cellulose‐based columns, Chiralpak IA, IB, and IC. Chirality, 2011. © 2011 Wiley‐Liss, Inc.     

Chiral recognition ability and solvent versatility of bonded amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phase: enantioselective liquid chromatographic resolution of racemic N-alkylated barbiturates and thalidomide analogs

The chiral recognition ability and solvent versatility of a new chiral stationary phase containing amylose 3,5-dimethylphenylcarabamate immobilized onto silica gel (CHIRALPAK IA) is investigated. Thus, the direct enantioselective separation of a set of racemic N-alkylated barbiturates and 3-alkylated analogs of thalidomide was conducted using different nonstandard solvents as eluent and diluent, respectively in high-performance liquid chromatography (HPLC). The separation, resolution, and elution order of the investigated compounds were compared on both immobilized and coated amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phases (Chiralpak IA and Chiralpak AD, respectively) using a mixture of n-hexane/2-propanol (90:10 v/v) as mobile phase with different flow-rates and fixed UV detection at 254 nm. The effect of the immobilization of the amylose tris(3,5-dimethylphenylcarbamate) chiral stationary phase on silica (Chiralpak IA) on the chiral recognition ability was noted as the bonded phase (Chiralpak IA) was superior in chiral recognition and possesses a higher resolving power in most of the reported cases than the coated one (Chiralpak AD). A few racemates were not or poorly resolved on the immobilized Chiralpak IA or the coated Chiralpak AD when using standard solvents were most efficiently resolved on the immobilized Chiralpak IA upon using nonstandard solvents. Furthermore, the immobilized phase withstands the nonstandard (prohibited) HPLC solvents such as dichloromethane, ethyl acetate, tetrahydrofuran, methyl-tert-butyl ether, and others when used as eluents or as a dissolving agent for the analyte itself. The direct analysis of a real sample extracted from plasma using DCM on Chiralpak IA is also shown.     

Immobilization and biocatalysis of chlorophyllase in selected organic solvent systems

Chlorophyllase extract from Phaeodactylum tricornutum was immobilized by physical adsorption on DEAE-cellulose and silica gel as well as by covalent binding on Eupergit C, Eupergit C250L, Eupergit C/ethylenediamine (EDA) and Eupergit C250L/EDA. Although the highest immobilization yield (83-93%) and efficiency (51-53%) were obtained when chlorophyllase extract was immobilized on DEAE-cellulose and silica gel, there was no improvement in the thermal stability of chlorophyllase as compared to that of the free one. The immobilization of chlorophyllase extract on Eupergit C250L/EDA resulted by a high recovery of enzymatic activity, with an immobilization efficiency of 44%, and promoted a higher stabilization of chlorophyllase (four times) in the aqueous/miscible organic solvent medium. On the other hand, the inhibitory effect of refined bleached deodorized (RBD) canola oil was reduced by immobilization of chlorophyllase extract onto silica gel as compared to those obtained with other enzyme preparations. However, the re-cycled chlorophyllase extract immobilized on Eupergit C250L/EDA retained more than 75% of its initial enzyme activity after 6 cycles, whereas that immobilized on silica gel was completely inactivated. The highest catalytic efficiency, for both free and immobilized chlorophyllase on Eupergit C250L/EDA, was obtained in the ternary micellar system as compared to the aqueous/miscible organic solvent and biphasic media.     

Aldehydic derivatives of bead cellulose--relationships between matrix structure and function in immobilization of enzymes catalyzing hydrolysis of high molecular substrates

Benzaldehyde derivatives of bead cellulose (BAC) were prepared and used, in parallel with bead cellulose oxidized by periodate (OC), for trypsin immobilization by reductive alkylation. Influence of pH (range 5-9) on formation and reduction of Schiff base as well as the importance of the reducing agent type-cyanoborohydride or borohydride-were tested. Borohydride reduction was more advantageous at pH 7 and pH 9 for BAC and OC, respectively. Residual activity of trypsin immobilized in this way was evaluated with substrates in the range 435 相似文献   

A new immobilization technique of whole cells and enzymes with colloidal silica and alginate

A mixed gel composed of colloidal silica and alginate (As gel) was prepared for the immobilization of enzymes or microorganisms. The physical strength of AS gel increased with the amount of colloidal silica. The ethanol production rate of Saccharomyces cerevisiae (IFO 0224) immobilized in AS gel was higher than in alginate gel (Al gel) in the early phase of growth. At a concentration of glucose of more than 10%, the ethanol production of immobilized yeast in AS gel was higher than in Al gel. Any difference was not recognized in the diffusion coefficient of glucose between AS and Al gels. The AS gel had an ability to retain proteins such as bovine serum albumin and gamma-globulin. The alkaline protease and beta-galactosidase in AS gel continued their function for a long time, but those immobilized in Al gel did not. Immobilized beta-galactosidase in AS gel had a higher thermal stability than in Al gel or free enzymes.     

Benzoates of cellulose bonded on silica gel: Chiral discrimination ability as high-performance liquid chromatographic chiral stationary phases

In order to generalize the recently described method for the insolubilization of polysaccharide derivatives to benzoates of cellulose, five mixed 10-undecenoate/benzoates of this polysaccharide have been prepared and linked to allyl silica gel by means of a radical reaction. The chiral recognition ability of the resulting materials when used as high-performance liquid chromatographic chiral stationary phases was evaluated using heptane/2-propanol and heptane/chloroform mixtures as mobile phases. Chirality 9:145–149, 1997. © 1997 Wiley-Liss, Inc.     

Structures of trichovirins II, peptaibol antibiotics from the mold Trichoderma viride NRRL 5243.

From the culture broth of the mold Trichoderma viride NRRL 5243 a mixture of polypeptides, named trichovirins (TV), could be isolated and purified by chromatography on XAD-2 adsorber resin and Sephadex LH-20 gel. Chromatography on silica gel using chloroform/methanol 8:2 as eluent provided a mixture of peptides named TV I. Subsequent elution with chloroform/methanol 1:1 yielded a second group of peptides named TV II. That group could be separated into individual components by repetitive HPLC on an octadecylsilyl and a fluorocarbon stationary phase. The sequences of 12 peptides of TV II could be determined by electrospray ionization tandem mass spectrometry of isolated peptides and gas chromatography-mass spectrometry of methanolysates. The N-termini of the 18-mer peptides are acetylated and the C-termini consist of leucinol. Owing to the presence of alpha-aminoisobutyric acid (Aib) residues and the bactericidal and hemolytic activity, the peptides belong to the family of peptaibol antibiotics.     

Synthesis and silica-based immobilization of monofunctionalized cyclomaltoheptaose derivatives for enantioselective HPLC

Heptakis(6-O-tert-butyldimethylsilyl-2,3-di-O-methyl)cyclomaltohep taose (6-TBDMS-2,3-Me-beta-CD) and heptakis(2,3,6-tri-O-methyl)cyclomaltoheptaose (per-Me-beta-CD) were monofunctionalized by introduction of a 5-cyanopentyl group attached to one of the O-2, O-3 or O-6 positions and subsequent reduction with lithium aluminum hydride to give the corresponding mono-O-(omega-aminohexyl) derivatives. Alternatively, after attachment of a 7-octenyl group and further epoxidation the corresponding mono-omega-epoxyoctyl derivatives of 6-TBDMS-2,3-Me-beta-CD were obtained. The mono-O-(omega-aminohexyl) derivatives were immobilized by reaction with glycidoxypropyl and 'aldehyde' silica, whereas aminopropyl silica was used for the immobilization of the monoepoxyoctyl derivatives. The immobilized cyclodextrin derivatives were partially evaluated as chiral stationary phases in high-performance liquid chromatography (HPLC) and micro-HPLC.     

Immobilization of cellulolytic and hemicellulolytic enzymes on inorganic supports

Commercial cellulase preparations from Trichoderma viride and Aspergillus niger were immobilized on porous silica glass and ceramics such as alumina and titania with titanium tetrachloride (TiCl(4)) and on their silanized derivatives with glutaraldehyde (GLUT). The amounts of the immobilized enzymes were in the range 10-50 mg/g carrier (dry) depending on the kind of carrier and immobilization method. Their activities toward carboxymethyl cellulose (CMC), xylan, aryl-beta-glucoside, and aryl-beta-xyloside were 3-53% of those of the native enzymes. The optimum pH of the enzymes shifted to the acidic side in most cases, whereas the optimum temperatures were nearly the same as those of native ones. The activity of immobilized enzyme preparations towards CMC did not change significantly during continuous operation over a periods of 60 days. Finally, xylan was hydrolyzed with the immobilized enzymes, and the sugars formed were investigated.     

Immobilization of papain on cotton fabric by sol–gel method

A method has been developed to immobilize papain on cotton fabric by means of sol–gel technique. The activity of free papain and papain in silica sol under sonication was studied. Scanning electron microscopy, energy dispersive spectrometer and the Bradford method were used to characterize papain immobilization. The efficiency of the immobilization was investigated by examining the relative enzymatic activity of free and immobilized papain, respectively. The results show that the optimum pH value in the medium for immobilized papain is shifted to alkaline side. In addition, the adaptability of papain to environmental acidity is significantly increased. The thermostability of immobilized papain shows no significant change compared to the free enzyme. The papain immobilized on fabric by sol–gel technique retains more than 30% of the original activity after six reuses continuously.     

Preparation and characterization of enzymes immobilized by graft copolymerization to different polysaccharides

A method of enzyme immobilization by graft copolymerization on polysaccharides is reported. Glycidylmethacrylate was used as a vinylating reagent and the reaction product with enzymes (HRP, GOD, Am, ChT) was copolymerized with different matrices (cellulose, Sepharose, Sephadex, Starch). Various factors affect the final activity of copolymers; these include the redox system, the type of support, and the quantity and type of vinyl monomer added. Using a fixed quantity of enzyme and support (3 mg enzyme, 100 mg support), the coupling efficiency varied from 2 to 50%. The most important characteristics in these immobilized systems were tested (stability in continuous washing, kinetic characteristics, storage, thermal, and lyophilization stability). Immobilized-enzyme graft copolymers have very similar kinetic behavior to that of the free enzyme. Diffusion is not seriously limited, as shown by kinetic parameters and energy activation values, and this indicates that the immobilization reaction does not alter the enzymatic activity.     

Chiral-recognition chromatography of β-blockers on continuous polymer beds with immobilized cellulase as enantioselective protein

Columns prepared by coupling cellulase as a chiral selector to silica beads are very efficient for the separation of enantiomers. In this paper we show that continuous polymer beds compete favorably with silica beads as chromatographic supports for such separations. The chiral stationary phase is prepared either by entrapment in and simultaneous covalent linkage of ally1 cellulase to the continuous beds during their preparation or by covalent immobilization of cellulase on an epoxy-activated continuous bed. Enantiomers of β-blockers were separated rapidly and with high resolution. The enantiomers of practolol were thus baseline resolved within 45 sec. The recognition center–or at least part of it—coincides with the active center of the enzyme, since the enantiomers could not be separated in the presence of the competitive enzyme inhibitors cellobiose and D-glucose and the separation was also impaired upon addition of the substrate carboxymethyl cellulose to the eluent. Similar observations have been reported for silica columns derivatized with cellulase. The capacity factor and the separation selectivity could be tuned by the pH and the concentration of the mobile phase, a phosphate buffer. No modifier was required, as is sometimes the case with silica-based supports. The continuous beds give faster enantiomer separations than do columns of silica and are more pH-stable and cost effective to prepare. © 1993 Wiley-Liss, Inc.     

Efficient immobilization technique for enhancement of cellobiose dehydrogenase activity on silica gel

In this study, cellobiose dehydrogenase (CDH) of Phanerochaete chrysosporium ATCC 32629 was immobilized on silica gel for the further application of CDH in the saccharification process of biomass. To prevent the loss of enzyme activity during enzyme immobilization, the pretreatment of CDH was performed by various pretreatment materials before immobilization. When pretreated enzymes were used in immobilization, the activities of immobilized CDH were higher than non-pretreated CDH even in same amounts of immobilized protein. The specific activity of pretreated immobilized CDH with lactose was about two times higher than that of non-pretreated immobilized CDH. Moreover, the pretreated immobilized CDH showed better reusability than non-pretreated immobilized CDH, with 67.3% of its original activity being retained after 9 reuses.     

Evaluation of a silica-coated magnetic nanoparticle for the immobilization of a His-tagged lipase

Magnetic particles of size 10 nm have been coated with silica to a mean diameter of 40 nm and charged with Cu²⁺ ions via a multidentate ligand, iminodiacetic acid (IDA), for the immobilization of His-tagged Bacillus stearothermopilus L1 lipase. Microporous (average pore diameter of 60 Å) silica gel with a mean particle diameter of 115 µm has been used as a comparative support material. The molar ratio of Cu²⁺ to IDA was found to be 1:1.14 and 1:1.99 in the silica gel and the silica-coated magnetic nanoparticles (SiMNs), respectively. The specific activity of the immobilized enzyme was found to conform to the following order: Cu²⁺-charged SiMN>SiMN>Cu²⁺-charged silica gel>silica gel. When it was immobilized on the Cu²⁺-charged SiMNs, over 70% of the initial activity of the lipase remained after it had been reused five times. However, only 20% of the initial activity remained after the enzyme immobilized on the Cu²⁺-charged silica gel had been reused five times. For the enzyme immobilized on supports without Cu²⁺ cations, all activity was lost after threefold reuse. The differences in the specific activities and the efficiencies of reuse of the enzymes immobilized on the various support materials are discussed in terms of immobilization mechanisms (physical adsorption vs. coordination bonding), mass transfer of a substrate and a product of the enzyme reaction, and the status of the Cu (Cu bound to the IDA on the silica layer vs. Cu directly adsorbed on the silica layer).     

Improved immobilized enzyme systems using spherical micro silica sol-gel enzyme beads

Spherical micro silica sol-gel immobilized enzyme beads were prepared in an emulsion system using cyclohexanone and Triton-X 114. The beads were used for thein situ immobilization of transaminase, trypsin, and lipase. Immobilization during the sol to gel phase transition was investigated to determine the effect of the emulsifying solvents, surfactants, and mixing process on the formation of spherical micro sol-gel enzyme beads and their catalytic activity. The different combinations of sol-gel precursors affected both activity and the stability of the enzymes, which suggests that each enzyme has a unique preference for the silica gel matrix dependent upon the characteristics of the precursors. The resulting enzyme-entrapped micronsized beads were characterized and utilized for several enzyme reaction cycles. These results indicated improved stability compared to the conventional crushed form silica sol-gel immobilized enzyme systems.     

Activity studies of immobilized subtilisin on functionalized pure cellulose-based membranes

The activity of immobilized subtilisin BPN' on pure cellulose-based membrane support was investigated using site-directed and random immobilization approaches. The catalytic activity of site-directed immobilized subtilisin on pure cellulose fiber-based materials was found to be 81% of that in homogeneous solution, while that of randomly immobilized subtilisin was 27%. Pure cellulose membrane supports provided large surface areas for high enzyme loading without diffusional limitations. The activity of immobilized subtilisin on pure cellulose support was more than twice that on a modified polyether sulfone (MPS) membrane, which was attributed to the higher hydrophilicity of cellulose. Immobilized subtilisin maintained its initial activity for 14 days at 4 degrees C and 7 days at 24 degrees C. The immobilized enzyme could resist higher temperature and operate over a wider range of pH without loss of activity. This study showed that pure cellulose fiber-based membranes are well suited for enzyme immobilization and biocatalysis.     

Development of Silica Gel-Supported Modified Macroporous Chitosan Membranes for Enzyme Immobilization and Their Characterization Analyses

The present work was aimed at developing stability enhanced silica gel-supported macroporous chitosan membrane for immobilization of enzymes. The membrane was surface modified using various cross-linking agents for covalent immobilization of enzyme Bovine serum albumin. The results of FT-IR, UV–vis, and SEM analyses revealed the effect of cross-linking agents and confirmed the formation of modified membranes. The presence of silica gel as a support could provide a large surface area, and therefore, the enzyme could be immobilized only on the surface, and thus minimized the diffusion limitation problem. The resultant enzyme immobilized membranes were also characterized based on their activity retention, immobilization efficiency, and stability aspects. The immobilization process increased the activity of immobilized enzyme even higher than that of total (actual) activity of native enzyme. Thus, the obtained macroporous chitosan membranes in this study could act as a versatile host for various guest molecules.     

Influence of surface characteristics of cellulose carriers on ethanol production by immobilized yeast cells

Ethanol production was carried out by growing yeast cells immobilized on porous cellulose carriers. The effects of the chemical modification of cellulose carriers on cell immobilization and ethanol production were examined with respect to ion-exchange capacity and chemical structure. The ion-exchange capacity of 0·1 meq/g-carriers had no effect on immobilization but affected ethanol production by repeated batch cultures using immobilized yeast cells. Diethylaminoethyl was a suitable function group for immobilization and ethanol production. Ethanol productivity of the 10th batch cycle with diethylaminoethyl cellulose carriers was 23% greater than that of the first batch cycle.