An Upper Miocene siliciclastic-carbonate ramp: depositional architecture, facies distribution, and diagenetic history (Capo Vaticano area, southern Italy)

During the Late Miocene, the marginal areas of the Mediterranean Basin were characterized by the development of mixed siliciclastic-carbonate ramps. This paper deals with a temperate siliciclastic-carbonate ramp (late Tortonian–early Messinian in age) which crops out in the Capo Vaticano area, Southern Apennines (Italy). Carbonate components are mainly represented by calcitic skeletal fragments of coralline red algae, bryozoans, bivalves, and larger foraminifera, whereas corals, brachiopods, echinoderms, and planktonic foraminifera are subordinate. In the studied ramp, the depositional geometries of the main unit, the ‘Sabbie gialle ad Heterostegina’, show a gradual steepening from low/middle (dip about 2–5°) to steep slope settings (up to 25°). The microfacies observations, the quantitative analyses of the main biogenic components as well as the rhodolith shapes and growth forms allowed the differentiation between the middle and the outer ramp depositional setting and the refining of the stratigraphic framework. The middle ramp is characterized by coralline red algal debris packstone facies often associated with larger foraminiferal floatstone/packstone facies, while the outer ramp is characterized by rhodolith floatstone/rudstone facies. These facies pass basinward into typical open-marine deposits (planktonic foraminiferal facies). The taxonomic composition of the coralline red algal assemblage points to a temperate paleoclimate and emphasizes the Miocene Mediterranean phytogeographic patterns. The absence of non-skeletal grains (ooids and green algae), the paucity of Porites patch reefs, the rare occurrence of primary marine cementation, all confirm that the studied ramp was poorly lithified within a warm–temperate setting. The flat depositional profile of the ramp can be related to the absence or paucity of primary marine carbonate cements.     

Applications of nummulitids and other larger benthic foraminifera in depositional environment and sequence stratigraphy: an example from the Eocene deposits in Zagros Basin,SW Iran

The Tale-Zang Formation in Zagros Mountains (south-west Iran) is a Lower to Middle Eocene carbonate sequence. Carbonate sequences of the Tale-Zang Formation consist mainly of large benthic foraminifera (e.g. Nummulites and Alveolina), along with other skeletal and non-skeletal components. Water depth during deposition of the formation was determined based on the variation and types of benthic foraminifera, and other components in different facies. Microfacies analysis led to the recognition of ten microfacies that are related to four facies belts such as tidal flat, lagoon, shoal and open marine. An absence of turbidite deposits, reefal facies, gradual facies changes and widespread tidal flat deposits indicate that the Tale-Zang Formation was deposited in a carbonate ramp environment. Due to the great diversity and abundance of larger benthic foraminifera, this carbonate ramp is referred to as a “foraminifera-dominated carbonate ramp system”. Based on the field observations, microfacies analysis and sequence stratigraphic studies, three third-order sequences in the Langar type section and one third-order sequence in the Kialo section were identified. These depositional sequences have been separated by both type-1 and type-2 sequence boundaries. The transgressive systems tracts of sequences show a gradual upward increase in perforate foraminifera, whereas the highstand systems tracts of sequences contain predominantly imperforate foraminifera.     

The Cenomanian of northern Germany: facies analysis of a transgressive biosedimentary system

A facies analysis of the epicontinental marine Cenomanian sediments of northern Germany shows the presence of 17 facies types (FTs, including several subtypes) which can be assigned to three facies associations: 1) an inner shelf facies association (FT 1–8) with high amounts of terrigenous material and/or high-energy depositional features, 2) a middle shelf facies association (FT 9–15) of predominantly calcareous sediments with moderate amounts of generally fine siliciclastics, and 3) an outer shelf facies association (FT 16–17) of low-energy, fine-grained, pure limestones. These three facies associations roughly correspond to the well-known lithological units of the Cenomanian of northern Germany, i.e., the Essen Greensand/Cenomanian Marls complex, the Pläner Limestones, and the Poor rhotomagense Limestones. The sediments were deposited on a northward-dipping homoclinal ramp with more-or-less shoreline-parallel facies belts. The sediment composition on this ramp-like shelf was a function of the varying importance of three different sediment sources: 1) terrigenous input from the south (Rhenobohemia), generally fining/decreasing in a proximal–distal (i.e., S–N) direction; 2) production of skeletal grains, mainly by macrobenthic organisms; and 3) settling of planktic carbonate (mainly calcispheres and calcareous nannofossils). In response to decreasing water energy with increasing water depth, the seaward decreasing terrigenous influence, and increasing planktic carbonate production, increasingly finer and more calcareous sediments were deposited in a proximal–distal transect. This rather straightforward picture was slightly modified by highest carbonate accumulation rates (planktic and benthic) on the middle shelf, forming a mid-shelf depocenter (fossiliferous, calcisphere-rich Pläner Limestones). Time-transgressive, southward-directed onlap of this biosedimentary system during the Cenomanian caused a significant retreat of the coastline towards the south and a retrogradational stacking of facies belts, explaining the broadly similar facies development and lithology of Cenomanian successions across northern Germany. The boundaries of the lithological units, however, tend to be considerably diachronous in a distal–proximal transect. In the late Middle and early Late Cenomanian, a final drowning and facies levelling (“oceanization”) is indicated by the widespread deposition of uniform calcareous nannofossil mudstones (Poor rhotomagense Limestones).     

Facies development of a Late Ordovician mixed carbonate-siliciclastic ramp proximal to the developing Taconic orogen: Lourdes Formation, Newfoundland, Canada

The Upper Ordovician (late Whiterockian to Mohawkian) Lourdes Formation represents a narrow (tens of kilometers), short-lived [∼5–7 million years (my)], open-ocean (high-energy) mixed siliciclastic-carbonate ramp that onlapped allochthonous strata along the orogen side of the local Taconic foreland basin. Platform development followed a 6–8 my hiatus during which weathering had concentrated chemically mature siliciclastics that were admixed with initial carbonate sediments. A cross-platform facies gradient contains paleokarst and peritidal carbonates and sandstones, shallow-ramp carbonate bioherms and skeletal shoals, and deeper ramp calcareous shales. Transgressive systems tracts are marked by ramp-wide sheets and shoals of skeletal grainstone and low accumulation rates, and highstand systems tracts are marked by significant admixture and interbedding of siliciclastics with cross-ramp carbonate facies. Platform demise coincides with increased siliciclastic input, which is likely tectonically influenced. The Lourdes platform is equivalent to epicontinental foreland ramps along eastern Laurentia, but its narrower width precluded formation of oceanographically restricted platform-interior facies.     

Sedimentation on three caribbean atolls: Glovers reef,lighthouse reef and turneffe Islands,belize

Summary The chief mode of carbonate sedimentation on the Belizean atolls Glovers Reef, Lighthouse Reef and Turneffe Islands is the accumulation of organically-derived particles. Variations in the distribution of the composition and grain-sizes of surface sediments, collected along transects across the atolls, are environmentally controlled. Two major sediment types may be distinguished. (1) Reef and fore reef sediments are dominated by fragments of coral, coralline algae andHalimeda. Mean grain-sizes range from 1–2 mm. (2) Back reef sediments contain more mollusk fragments, more fine-grained sediment (<125 μm) and appear to have fewerHalimeda fragments. In addition, sediments from inner platforms and shallow lagoonal parts of Glovers and Lighthouse Reefs comprise non-skeletal grains, namely fecal pellets. Sediments from lagoonal patch reefs may contain up to 20% coral fragments. Mean grain-sizes range from 0.1–1 mm and are finest on the inner platform and lagoon floor of the back reef environment. Within the reef and fore reef environments, it is not possible to distinguish sub-environments on the basis of textural and compositional differences of the sediments. Sediments from patch reefs contrast with those from back reef lagoons and inner platforms and are similar in terms of grain-sizes and compositions to reef and fore reef surface sediments. Non-skeletal grains forming in shallow parts of the back reef in Glovers and Lighthouse Reefs are interpreted to be indurated by interstitial precipitation of calcium carbonate from warm, supersaturated water flushing the sediment. The lack of hardened non-skeletal particles in the back reef sediments of Turneffe Islands is most probably due to the abundance of muddy, organic-rich sediment in the well-protected lagoon. Fine sediment is less permeable and organic films prevent cement overgrowth on particles.     

Facies,depositional sequences,and biostratigraphy of the Oligo-Miocene Asmari Formation in Marun oilfield,North Dezful Embayment,Zagros Basin,SW Iran

The Asmari Formation in Marun oilfield (south-west Iran), is about 440 m-thick marine carbonate succession with subordinate siliciclastic rocks, characterized by abundant benthic foraminifera (perforate and imperforate). Foraminiferal biostratigraphy indicates that this unit is Oligocene–Miocene in age. The distribution of benthic foraminifera and other components have led to the recognition of three siliciclastic and ten carbonate facies that were deposited in inner ramp (shoreline, tidal flat, restricted and open lagoon and shoal), middle and outer ramp sub-environments. Based on vertical facies trends, three third-order sequences in the Oligocene and three third-order sequences in the Miocene sediments have been identified. These depositional sequences are bounded by both type 1 and type 2 sequence boundaries. The transgressive systems tracts (TST) of sequences show deepening-upward facies trend with a gradual upward increase in perforate foraminifera, whereas the highstand systems tracts (HST) have a shallowing-upward facies trend and contain predominantly imperforate foraminifera. Deposition of these depositional sequences (DS) were controlled by both eustasy and tectonic subsidence.     

Ramp morphology controlling the facies differentiation of a Late Ordovician reef complex at Bachu,Tarim Block,NW China

A carbonate ramp in the shallow‐marine northwestern part of the Central Tarim Uplift, Bachu, NW China, exhibits an extraordinary Late Ordovician reef complex along the Lianglitag Mountains, exposed for a distance of about 25 km. Seven localities within the ‘Middle Red Limestone’ of the Upper Member of the Lianglitag Formation (Katian, Late Ordovician) illustrated the changes in biofacies and lithofacies: northern, seaward‐directed patch reefs are replaced towards the south by coeval grain banks. The patch reef units are dominated by microbial and calcareous algal components. The reefs at the northernmost locality are knoll‐shaped, kalyptra‐shaped or irregularly shaped with sizes of individual reefs increasing from about 2 m in height and diameter. Stratigraphically upward, reefs notably expand to larger structures by several mounds coalescing; they are generally about 10 m thick and tens of metres in lateral extent. The maximum thickness of the main patch reef is more than 30 m, and its diameter is around 100 m. The reefal units turn into biostromes with gentler relief southward and still further south grade into banks composed of peloids and coated grains. The southernmost locality is still a shallow‐water bank, and the coastline is not documented in the study area. The present evidence indicates that the Late Ordovician palaeo‐oceanography provided a number of environments for the optimal growth of carbonate build‐ups; microbial‐calcareous algal communities could thrive in areas where the innovative metazoan reef frameworks consisting of corals and stromatoporoids did not play a significant role. The ramp morphology, especially changes in water depth, controlled the configuration of the reef complex.     

Facies architecture and depositional development of Middle Miocene carbonate strata at Siwa Oasis, Northwestern Egypt

Based on microfacies analyses and sedimentological data, 17 facies are identified within the Middle Miocene carbonates at Siwa Oasis in the northern Western Desert of Egypt. These facies are attributed to five main facies belts. Within these facies and facies belts, five foraminiferal assemblages are recognized. A depositional model relates the reported facies and biofacies to a down-dip depositional profile of an inner to middle carbonate ramp. The facies of the peritidal to restricted lagoon (facies belt 1) and the less-restricted lagoon (facies belt 2) were deposited in the inner ramp behind the barrier/beach shoal facies belt 3. Basinward, lime mudstone of facies belts 4 and 5 accumulated in a proximal to distal middle ramp, respectively. The depositional evolution involved three stages, which are strongly controlled by tectonics and eustatic sea-level changes. The first stage comprises the transgressive Lower Miocene clastic-dominated fluvial facies of the Moghra Formation. The second stage heralds the deposition of the Langhian inner-ramp carbonate and shale facies of the basal Oasis Member of the Marmarica Formation under a relatively high stand of sea level, constrained clastic influx and climate warming. The final stage is represented by Langhian to Serravallian mid-ramp carbonate-dominated facies of the Siwa Escarpment and El Diffa Plateau members under fluctuating sea level, and a westward restriction in clastic supply and water turbidity.     

Offshore sedimentary facies of a modern carbonate ramp, Kuwait, northwestern Arabian-Persian Gulf

The Kuwait example studied here may serve as a model for ancient carbonate ramp systems just as the classical—but markedly different—southern Arabian-Persian Gulf ramp of the Trucial Coast (United Arab Emirates). Five sedimentary facies may be distinguished on the modern southern Kuwait carbonate ramp based on quantitative sedimentological, mineralogical, and geochemical analyses of 130 surface sediment samples and by using multivariate statistics. These facies include (1) inner ramp ooid-skeletal grainstone with common aggregate grains, peloids, and molluscs, (2) limited occurrences of nearshore quartz-ooid sand, (3) mid ramp mollusk packstone to grainstone, (4) outer ramp mollusk-marl wackestone with abundant siliciclastic fines, and (5) coralgal grainstone that is found on small nearshore patch reefs and outer ramp pinnacle and platform reefs. In addition to facies (1), an aggregate grain packstone to grainstone sub-facies is mapped out where abundances of this grain type exceed 20%. Ooid-skeletal grainstone, mollusk packstone to grainstone, and coralgal grainstone are predominantly aragonitic with 5–10% insoluble residue on average. Mollusk-marl wackestone has 55% insoluble residue on average with aragonite and low-magnesium calcite predominating in the carbonate fraction. Dolomite in this facies is interpreted to be of eolian origin derived from the upwind deserts of Syria and Iraq. Facies distribution is correlated with water depth, and hence controlled by depositional energy, primarily wavebase. This correlation is seen in the results of statistical analyses and in the fact that facies boundaries are more or less parallel to depth contours. Ooid-skeletal grainstones are found in depths from 0 to <10 m. The boundary between the mollusk packstone to grainstone and the mollusk-marl wackestone, which also marks the transition from grain-supported to mud-supported textures, is situated between 15–20 m depth and is much sharper than the boundary between the ooid-skeletal and the mollusk packstone to grainstone facies. Carbonate-dominated facies may also be distinguished geochemically as indicated by significantly different carbon and oxygen isotope compositions. The latter should be kept in mind when using bulk isotope values for chemostratigraphy or for paleo-environmental reconstructions in fossil carbonate ramps and platforms.An erratum to this article can be found at .     

Upper Eocene larger foraminiferal–coralline algal facies from the Klokova Mountain (southern continental Greece)

Within the Gavrovo–Tripolitza area (southern continental Greece), marine carbonate platforms existed from the Late Triassic to the Late Eocene. The Middle–Upper Eocene marine shallow-water carbonates of the Klokova Mountain represent remnants of the large volumes of sediment that were produced on a middle ramp sedimentary system which culminated in the Lower Oligocene terrigenous deposits. Facies analysis of Bartonian–Priabonian shallow-water carbonate successions and the integration with palaeoecological analysis are used to produce a detailed palaeoenvironmental model. In the proximal middle ramp, porcelaneous foraminiferal packstone facies is characterised by larger foraminifera such as Praturlonella and Spirolina. These forms thrived in a shallow-water setting with low turbidity, high-light intensity and low-substrate stability. The foraminiferal packstone facies, the thin coralline wacke–packstone facies and the rhodolith packstone facies deposited approximately in the same depth range adjacent to one another in the middle-ramp. Nummulitids (Nummulites, Assilina, Pellatispira, Heterostegina and Spiroclypeus) increase in abundance in the middle to distal mid-ramp together with the orthophragminids. Coralline algae, represented by six genera, are present in all facies. Rhodoliths occur in all facies but they show different shapes and growth forms. They develop laminar sub-ellipsoidal shapes in higher turbulence conditions on mobile sand substrates (foraminiferal packstones and rhodolith rudstones), whilst sub-discoidal shapes often bound by thin encrusting coralline plants in lower hydrodynamic settings. The distinctive characteristics of the palaeoecological middle-ramp gradient are an increase in dominance of melobesioids, a thinning of the encrusting coralline plants and a flattening of the larger benthic foraminiferal shells.     

Evolution of shallow benthic communities during the Late Paleocene–earliest Eocene transition in the Northern Tethys (SW Slovenia)

A paleoecological and sedimentological study was carried out on shallow-water carbonates of the Kras Plateau (SW Slovenia) with the goal of reconstructing paleoenvironmental conditions and evolution of foraminiferal communities on the northwestern Adriatic Carbonate Platform (AdCP) during the Late Paleocene–earliest Eocene. Three facies have been recognized and summarized in a carbonate ramp model. Within these facies, six foraminiferal assemblages, representing different ramp sub-environments, have been defined: during the Late Paleocene sedimentation took place in a protected innermost ramp with (1) smaller miliolids- and (2) small benthic foraminifera-dominated assemblages thriving on partly vegetated, soft substrates. In the Uppermost Paleocene, sedimentation primarily occurred along a mid ramp. The upper mid-ramp was sporadically influenced by storms/currents and occupied by (3) Assilina-dominated assemblage occurring on a soft sandy substrate. The deeper mid-ramp was characterized by (4) ‘bioconstructors’- and (5) orthophragminids-dominated assemblages, colonizing biotopes with substrates of different nature. During the earliest Eocene, deposition occurred in an inner-ramp setting with (6) alveolinids-nummulitids assemblage thriving on muddy and sandy substrate, partly covered or close to seagrass beds. The Late Paleocene–earliest Eocene environmental conditions, coupled with the long-term evolution of larger benthic foraminifera (LBF), seem to have favored this low-light dependent group as common sediment contributors. By comparing the evolution of the shallow-water biota from the Adriatic area with data from the Pyrenees and Egypt, a general latitudinal trend can be recognized. However, on a smaller geographical scale, local conditions are likely to have played a pivotal role in promoting the evolution of biota characterized by suites of unique features.     

A paleoenvironmental standard section for Early Ilerdian tropical carbonate factories (Corbieres, France; Pyrenees, Spain)

Early Ilerdian (Early Eocene, Shallow Benthic Zones 5 and 6) carbonate systems of the Pyrenees shelf were deposited after a time of severe climatic (‘Paleocene–Eocene Thermal Maximum, PETM’) and phylogenetic (‘Larger Foraminifer Turnover’) changes. They reflect the radiation of nummulitid, alveolinid, and orbitolitid larger foraminifera after remarkable biotic changes at the end of the Paleocene, and announce their subsequent flourishing in the Middle Eocene.A paleoenvironmental model for tropical carbonate environments of this particular time interval is provided herein. During the Early Ilerdian, the inner and middle ramp deposits from Minerve, Campo and Serraduy revealed the end-member of a tropical carbonate factory with carbonate production dominated by the end-members of biotically (photo-autotrophic skeletal) controlled and biotically induced carbonate precipitation. Inner platform environments are dominated by alveolinids and in part by orbitolitids, middle platform environments are dominated by nummulitids. Corals are present, but they do not form reefs, which is a typical feature for the Eocene. Nummulite shoal complexes, which are well-known from the Middle Eocene are also absent during the studied Early Ilerdian interval, which may reflect the early evolutionary stage of this group.     

Depositional environments and facies development of the Cenomanian–Turonian Galala and Maghra el Hadida formations of the Southern Galala Plateau (Upper Cretaceous,Eastern Desert,Egypt)

The Cenomanian–Turonian (Upper Cretaceous) Galala and Maghra el Hadida formations of the Southern Galala Plateau in Wadi Araba (northern Eastern Desert, Egypt) represent marine depositional systems developing in response to the early Late Cretaceous transgression at the southern margin of the Neotethyan Ocean in tropical paleolatitudes. A facies analysis (litho-, bio- and microfacies) of these successions shows the presence of 22 facies types (FTs, six are related to the Galala Formation, while the Maghra el Hadida Formation is represented by 16 FTs). The Galala Formation was deposited in a fully marine lagoonal environment developing in response to a latest Middle to early Late Cenomanian transgression. The rich suspension- and deposit-feeding macrobenthos of the Galala Formation indicate meso- to eutrophic (i.e., green water) conditions. The facies types of the uppermost Cenomanian–Turonian Maghra el Hadida Formation suggest deposition on a homoclinal carbonate ramp with sub-environments ranging from deep-subtidal basin to intertidal back-ramp. Major and rapid shifts in depositional environments, related to (relative) sea-level changes, occurred in the mid-Late Cenomanian, the Early–Middle Turonian boundary interval, the middle part of the Middle Turonian and the Middle–Late Turonian boundary interval.     

A modern-type Kimmeridgian reef (Ota Limestone,Portugal): Implications for Jurassic reef models

Upper Jurassic reefs rich in microbial crusts generally appear in deeper (sponge—‘algal’ crust reefs) or in very shallow but protected settings (coral or coral-coralline sponge meadows with ‘algal’ crusts). Upper Jurassic high-energy reefs (coral reefs and coral-stromatoporoid reefs) normally lack major participation of microbial crusts but rather represent huge bioclastic piles with only minor framestone patches preserved. An exception to this rule is represented by the high-energy, coral-‘algal’ Ota Reef from the Kimmeridgian of the Lusitanian Basin (Portugal). The narrow Ota Reef tract rims a small intra-basinal carbonate platform exhibiting perfect facies zonation (from W to E: Reef tract, back reef sands, peritidal belt, low-energy shallow lagoon). The reef is dominated by massive corals (Thamnasteria, Microsolena, Stylina). Complete preservation of coral framework is rare: like other Upper Jurassic high-energy reefs, the Ota Reef is very rich in debris; however, this debris is largely stabilized by algal and microbial crusts, what contrasts the other examples and gives the Ota Reef the appearance of a typical modern high-energy coral-melobesioid algal reef. Further similarities to modern reefs are the likely existence of a spur-and-groove system, the perfect sheltering of inner platform areas and the occurrence of small islands, as indicated by local blackenings and early vadose and karstic features.     

Re-interpretation of a Lower–Middle Cambrian West Gondwanan ramp depositional system: a case study from the Cantabrian Zone (NW Spain)

Detailed litho- and biofacies investigations of the Lower–Middle Cambrian carbonate Láncara Formation resulted in its subdivision into nine lithofacies types: (1) claystone, (2) recrystallized mudstone, (3) laminated mudstone with laminoid-fenestral fabrics, (4) stromatolite, (5) laminated aggregate grainstone, (6) non-laminated aggregate grainstone, (7) oolitic-bioclastic floatstone, (8) echinodermal packstone, and (9) bioclastic grainstone. The thicknesses of lithofacies 1–7 (lower member of the Láncara Formation) decrease from south to north. Lithofacies types 8–9 (upper member of the Láncara Formation) are characterized by similar thicknesses and low facies and faunal gradients and are thus indicative of deposition on a carbonate ramp. From palaeoecological, palaeo(bio)geographical, palaeomagnetic, and tectonic considerations, the depositional environment of the Láncara Formation is re-interpreted as an eastward/north-eastward sloping, low morphology carbonate ramp. The Cantabrian Zone, with a primary lateral extension of about 300 km, is further construed to be an element of a widespread and connected, discontinuous drowned Perigondwanan depositional system.     

Cycle stacking pattern, diagenesis and reservoir geology of peritidal dolostones, Trigonodus-Dolomite, Upper Muschelkalk (Middle Triassic, SW-Germany)

Summary Peritidal dolostones (Trigonodus-Dolomite) characterize the back-bank environment of the Upper Muschelkalk (Middle Triassic) carbonate ramp of SW-Germany. These deposits represent the Late Highstand Systems Tract (HST) of the ‘Third-Order’ Middle to Upper Muschelkalk depositional sequence. The HST forms an overall shallowing-upward trend and is build by a progradational stack of 1–2 m thick shallowing-upward cycles. The latter vary from subtidal-to-intertidal cycles at the base of the investigated section to intertidal-to-supratidal cycles at the top of the section. Six major facies types can be recognized: subtidal associations are characterized by oolithic grainstones, lagoonal oncolithic wackestones and peloidal mudstones. Intertidal associations are characterized by ostracod wackestones and laminated mudstones, supratidal facies consist of laminated mudstones with tepee horizons and flat pebble conglomerates as well as paleosol horizons. Thin section petrography, cathodoluminescence-microscopy and stable isotope geochemistry reveal a complex dolomitization history (evaporative dolomitization; burial dolomitization). The strong negative oxygen isotope signatures(−3.28 to−5.85‰) point out burial dolomitization as the dominant stage. The Trigonodus-Dolomite shows intercrystalline porosity and some vuggy porosity. Subtidal dolo-grainstones with idiotopic texture at the base of the investigated section have fair permeabilities (5–30 mD) and high porosities (14–32%). Inter-to supratidal dolo-wackestones and dolo-mudstones with xenotopic texture at the top of the section have very low permeabilities (0.3–1.0 mD) and lower porosities (11–16%). The reservoir characteristics with lateral continuity of porous and permeable zones at the base of the section and less porous and impermeable zones at the top again reflect the stacking pattern of shallowing-upward cycles within the overall shallowing-upward trend of the HST. Primary facies and dolomitization processes thus control the distribution of porosity and permeability.     

Oncoid growth and distribution controlled by sea-level fluctuations and climate (Late Oxfordian,Swiss Jura Mountains)

Abundant lagoonal oncoids occur in the Late Oxfordian Hauptmumienbank Member of the Swiss Jura Mountains. Four oncoid types are observed in the studied sections and classified according to the oncoid surface morphology, the structure and composition of the cortex, and the texture and fauna of the encasing sediment. Micrite-dominated oncoids (types 1 and 2) have a smooth surface. Type 1 has a rather homogeneous cortex and occurs in moderate-energy environments. Type 2 presents continuous or discontinuous micritic laminae. It is associated with a low-diversity fauna and occurs in high-energy facies. Bacinella and Lithocodium oncoids (types 3 and 4) display a lobate surface. They are dominated by microencrusters (Bacinella irregularis and Lithocodium aggregatum) and are found in low-energy facies. The stratigraphic and spatial distribution of these oncoid types shows a correlation with the sequence-stratigraphic evolution of the studied interval, and thus with relative sea-level fluctuations. It can be shown that these sea-level fluctuations were controlled by orbital cycles with 100- and 20-kyr periodicities. At the scale of 100- and 20-kyr sequences, types 1 and 2 oncoids are preferentially found around sequence boundaries and in transgressive deposits, while types 3 and 4 oncoids are preferentially found around maximum floodings and in highstand deposits. This implies that changes of water energy and water depth were direct controlling factors. Discrepancies in oncoid distribution point to additional controlling factors. Platform morphology defines the distribution and type of the lagoon where the oncoids flourished. A low accumulation rate is required for oncoid growth. Additionally, humidity changes in the hinterland act on the terrigenous influx, which modifies water transparency and trophic level and thus plays a role in the biotic composition and diversity in the oncoid cortex.     

A multi-proxy study of deeper-water carbonates (Upper Jurassic, southern Germany): combining sedimentology, chemostratigraphy and palynofacies

Deeper shelf carbonates are often composed of relatively monotonous successions with few diagnostic sedimentological characteristics. The Upper Jurassic of southern Germany provides a classical example for deeper ramp carbonate environments, dominated by limestone/marl sequences including conspicuous sponge/microbial bioherms. Sedimentological analysis was integrated with stable isotope (O, C) and palynofacies analysis in an attempt to reconstruct the dominant depositional controls (sea level, climate, nutrients) as well as to delineate genetic sequences and their stacking patterns. Small-scale (3–10 m thick), medium-scale (5–25 m thick) and large-scale (45–60 m thick) sequences could be recognised, which all share similar patterns and trends. Oxygen isotopes from bulk rock carbonate samples were interpreted as records of temperature trends which were related to climatically induced sea level fluctuations. A positive oxygen isotope trend (i.e., cooling and associated relative sea-level fall) in combination with increasing absolute palynoclast abundances (increasing proximality) are inferred to mark regressive hemi-sequences. Negative trends in oxygen isotopes (i.e., warming and associated relative sea-level rise) and a decrease in absolute palynoclast abundances (increasing distality) are interpreted to indicate transgressive hemi-sequences. In contrast to the small-scale sequences, the medium-scale sequences could be correlated on a basin-wide scale by means of stable isotope trends and gamma-ray logs. Borehole scans were found to be useful for the recognition of major facies associations and sequence types when core data are not available.     

Facies evolution and sequence chronostratigraphy of a “mid”-Cretaceous shallow-water carbonate succession of the Apulia Carbonate Platform from the northern Murge area (Apulia,southern Italy)

The “mid”-Cretaceous carbonate succession of the Apulia Carbonate Platform cropping out in northern Murge area (Apulia, southern Italy) is composed of shallow-water carbonate rocks and is over 400 m in thickness. This paper focuses on the lithofacies analysis of this carbonate succession, its paleoenvironmental interpretation, and its sequence-chronostratigraphic architecture. Lithofacies analysis permitted to identify deposits which can be grouped into the following three facies belts: (1) terrestrial facies belt formed by: intraclast-supported paleosoils; solution-collapse breccias; (2) restricted facies belt made up of lithofacies deposited in protected peritidal environments; (3) normal-marine facies belt made up of lithofacies formed in moderate- to high-energy subtidal environments. The detailed study both in outcrops and in thin-sections revealed that, at the bed scale, lithofacies are cyclically arranged and form shallowing-upward small-scale depositional sequences comparable to parasequences and/or simple sequences. The following three small-scale sequence types have been distinguished: (1) subtidal sequences mostly made up of lithofacies formed in the normal-marine open subtidal domain; (2) peritidal sequences made up of lithofacies formed in the restricted peritidal domain; (3) peritidal sequences showing a cap formed by paleosoils. Small-scale sequences are not randomly arranged in the compiled succession but form discrete packages, or sets, that alternate in the sedimentary record. The repetition of such small-scale sequence packages in the succession has been the key to recognize large-scale sequences comparable to third-order depositional sequences. Although sedimentological data are often fragmentary due to late dolomitization, four large-scale sequences have been distinguished. The data support a generalized landward-backstepping of facies belts during transgression, which implies a gradual gain of accommodation culminating with the deposition of a package of small-scale sequences formed by normal-marine subtidal deposits. These mark periods of maximum accommodation space and form the maximum-flooding zones of large-scale sequences. A gradual seaward progradation of facies belts is recorded during highstand conditions, which implies a gradual loss of accommodation culminating with the deposition of a package of peritidal small-scale sequences capped by paleosoils or by solution-collapse breccias. The occurrence of terrestrial deposits marks periods of minimum accommodation on the platform and determines the sequence boundary of large-scale sequences. The large-scale sequences identified in this study fit with the main transgressive/regressive cycles published in the sequence-chronostratigraphic chart of European basins. As a consequence, it is interpreted that changes of the sea level recorded at the scale of European basins played an important role in determining the sequence-stratigraphic architecture of the studied succession. In spite of this, the occurrence of solution-collapse breccias, which implies a significant gap in carbonate sedimentation in between Early and Middle Cenomanian times, may also have an alternative interpretation. In particular, this deposit may represent the local fingerprint of the well-known tectonic phase which, during Late Albian-Early/Middle Cenomanian times, determined the subaerial exposure of large parts of Periadriatic carbonate platforms producing a marked regional unconformity.