Identification of quantitative trait loci controlling sucrose content in soybean (Glycine max)

Sucrose is a primary constituent of soybean (Glycine max) seed; however, little information concerning the inheritance of seed sucrose in soybean is available. The objective of this research was to use molecular markers to identify genomic regions significantly associated with quantitative trait loci (QTL) controlling sucrose content in a segregating F₂ population. DNA samples from 149 F₂ individuals were analyzed with 178 polymorphic genetic markers, including RFLPs, SSRs, and RAPDs. Sucrose content was measured on seed harvested from each of 149 F_2:3 lines from replicated field experiments in 1993 and 1995. Seventeen marker loci, mapping to seven different genomic regions, were significantly associated with sucrose variation at P<0.01. Individually, these markers explained from 6.1% to 12.4% of the total phenotypic variation for sucrose content in this population. In a combined analysis these genomic regions; explained 53% of total variation for sucrose content. No significant evidence of epistasis among QTLs was observed. Comparison of our QTL mapping results for sucrose content and those previously reported for protein and oil content (the other major seed constituents in soybean), suggests that seed quality traits are inherited as clusters of linked loci or that `major' QTLs with pleiotropic effects may control all three traits. Of the seven genomic regions having significant effects on sucrose content, three were associated with significant variation for protein content and three were significantly associated with oil content.     

Putative quantitative trait loci associated with calcium content in soybean seed

Seed calcium content is an important quality attribute of specialty soybean [Glycine max (L.) Merr.] for soyfoods. However, analyzing seed for calcium content is time consuming and labor intensive. Knowing quantitative trait loci (QTL) for seed calcium will facilitate the development of elite cultivars with proper calcium content through marker-assisted selection (MAS). The objective of this study was to identify major QTL associated with calcium content in soybean seed. Calcium content was tested in 178 F(2:3) and 157 F(2:4) lines derived from the cross of SS-516 (low calcium) x Camp (high calcium). The F(2:3) lines were genotyped with 148 simple sequence repeat markers in a previous study on seed hardness, and the genotypic data were used in the QTL analysis of the current study. Four QTL designated as Ca1, Ca2, Ca3, and Ca4 on linkage groups (LGs) A2, I, and M were identified by both single-marker analysis and composite-interval mapping, and the QTL accounted for 10.7%, 16.3%, 14.9%, and 9.7% of calcium content variation, respectively. In addition, multiple-interval mapping analysis revealed a significant dominant-by-dominant interaction effect between Ca1 and Ca3, which accounted for 4.3% calcium content variation. These QTL will facilitate the implementation of MAS for calcium content in soybean-breeding programs.     

Detection and stability of quantitative trait loci (QTL) in Eucalyptus globulus

Eucalyptus globulus Labill. ssp. globulus is an important tree species for the pulp and paper industry, and several breeding programmes throughout the world are striving to improve key traits such as growth and wood density. This study aimed to detect quantitative trait loci (QTL) for growth, wood density, relative bark thickness and early flowering in a single full-sib E. globulus family grown across seven sites. Growth was measured a number of times over a 6-year period, enabling temporal stability of growth QTL to be studied. Ten putative QTL (LOD > 2.0) were detected in the single family, which was of moderate size. Based on permutations of the trait data, six of these QTL were significant at the experimentwise significance level of 0.1 for at least one of the four models implemented in analysis to remove site effects. For wood density, two putative QTL explained 20% of the variance for the trait, indicating that a small number of QTL might explain a reasonable proportion of the trait variance. One of these QTL was found to be independent of QTL for growth whereas the second QTL co-segregated with a QTL for relative incremental growth. The marker nearest to this QTL was associated with fast growth but low wood density. A putative growth QTL at year 6 was found to be relatively stable across ages. In addition, it was found that residuals from models based on measurements from across all families across all sites in the trial detected QTL with greater experimentwise significance.     

Novel major quantitative trait loci regulating the content of isoflavone in soybean seeds

Despite their medicinal, pharmaceutical, and nutritional importance of isoflavones, the genetic basis controlling the amounts of isoflavones in soybean seeds is still not well understood. The main obstacle is the great variability in the content of isoflavone in seeds harvested from different environments. In this study, quantitative trait loci (QTL) for the content of different isoflavones including daidzein, genistein, and glycitein were investigated in a population of recombinant inbred lines derived from the cross of “Hwangkeum” (Glycine max) by “IT182932” (Glycine soja). Seeds analyzed were harvested in three different experimental environments. QTL analyses for isoflavone content were conducted by composite interval mapping across a genomewide genetic map. Two major QTL were mapped to soybean chromosomes 5 and 8, which were designated QDZGT1 and QDZGT2, respectively. Both loci have not been previously reported in other isoflavone sources. The results from this study will be useful in cloning genes that can control the contents of isoflavones in soybean and for the development of soybean lines containing a high or low isoflavone content.     

Identification of major quantitative trait loci underlying floral pollination syndrome divergence in Penstemon

Distinct floral pollination syndromes have emerged multiple times during the diversification of flowering plants. For example, in western North America, a hummingbird pollination syndrome has evolved more than 100 times, generally from within insect-pollinated lineages. The hummingbird syndrome is characterized by a suite of floral traits that attracts and facilitates pollen movement by hummingbirds, while at the same time discourages bee visitation. These floral traits generally include large nectar volume, red flower colour, elongated and narrow corolla tubes and reproductive organs that are exerted from the corolla. A handful of studies have examined the genetic architecture of hummingbird pollination syndrome evolution. These studies find that mutations of relatively large effect often explain increased nectar volume and transition to red flower colour. In addition, they suggest that adaptive suites of floral traits may often exhibit a high degree of genetic linkage, which could facilitate their fixation during pollination syndrome evolution. Here, we explore these emerging generalities by investigating the genetic basis of floral pollination syndrome divergence between two related Penstemon species with different pollination syndromes—bee-pollinated P. neomexicanus and closely related hummingbird-pollinated P. barbatus. In an F₂ mapping population derived from a cross between these two species, we characterized the effect size of genetic loci underlying floral trait divergence associated with the transition to bird pollination, as well as correlation structure of floral trait variation. We find the effect sizes of quantitative trait loci for adaptive floral traits are in line with patterns observed in previous studies, and find strong evidence that suites of floral traits are genetically linked. This linkage may be due to genetic proximity or pleiotropic effects of single causative loci. Interestingly, our data suggest that the evolution of floral traits critical for hummingbird pollination was not constrained by negative pleiotropy at loci that show co-localization for multiple traits.     

Mapping epigenetic quantitative trait loci (QTL) altering a developmental trajectory.

Genetic variation in a quantitative trait that changes with age is important to both evolutionary biologists and breeders. A traditional analysis of the dynamics of genetic variation is based on the genetic variance-covariance matrix among different ages estimated from a quantitative genetic model. Such an analysis, however, cannot reveal the mechanistic basis of the genetic variation for a growth trait during ontogeny. Age-specific genetic variance at time t conditional on the causal genetic effect at time t - 1 implies the generation of episodes of new genetic variation arising during the interval t - 1 to t. In the present paper, the conditional genetic variance estimated from Zhu's (1995) conditional model was partitioned into its underlying individual quantitative trait loci (QTL) using molecular markers in an F2 progeny of poplars (Populus trichocarpa and Populus deltoides). These QTL, defined as epigenetic QTL, govern the alterations of growth trajectory in a population. Three epigenetic QTL were detected to contribute significantly to variation in growth trajectory during the period from the establishment year to the subsequent year in the field. It is suggested that the activation and expression of epigenetic QTL are influenced by the developmental status of trees and the environment in which they are grown.     

Epistatic expression of quantitative trait loci (QTL) in soybean [Glycine max (L.) Merr.] determined by QTL association with RFLP alleles

Quantitative trait values for seed oil and protein content or for maturity were measured in recombinant inbred lines (RIL) of soybean derived from a cross between two soybean cultivars: Minsoy PI 27890 and Noir 1 PI 290136. Seed oil was found to be inversely correlated to protein content. By analyzing DNA from plants with extreme phenotypes, we were able to identify quantitative trait loci (QTL) for these traits as being linked to several restriction fragment length polymorphism (RFLP) loci, including R183 for oil and protein content and R79 for maturity. Cumulative distributions of trait values were graphed for those RIL with Minsoy alleles and for those with Noir 1 alleles. As already suggested by the alleles found associated with extreme phenotypes, the distributions were consistent with an independent and additive expression of the maturity QTL linked to R79. That is, the cumulative distributions for plants with Minsoy alleles and for plants with Noir 1 alleles were similar in shape, but the entire Noir 1 curve had been shifted to later maturity dates. In contrast, the trait distributions for a locus affecting oil and protein content linked to R183 were not compatible with an additive model. These results suggest that this approach can be used for rapid identification of QTLs with epistatic expression.     

Identification and validation of quantitative trait loci controlling seed isoflavone content across multiple environments and backgrounds in soybean

Soybean is important throughout the world not only due to the high seed protein and oil but also owing to the seed isoflavone. To improve the isoflavone concentration in seeds, detecting and mining the stable and reliable quantitative trait loci (QTLs) and related genes in multiple environments and genetic backgrounds become more and more important. In view of this, a F_6:7 recombinant inbred line (RIL) population of 345 lines derived from a cross between Zheng 92116 and Liaodou14 (ZL) was genotyped using 1739 polymorphic SNP and 127 SSR markers in this study and was phenotyped for individual and total seed isoflavone in four environments over 2 years. In total, 48 additive QTLs, which explained 3.00–29.83% of seed isoflavone variation, were identified. Of them, eight QTLs (qDA1_1, qGA1_1, qTIA1_1, qDA1_2, qGA1_2, qTIA1_2, qDA1_3, qTIA1_3) with phenotypic variation explained (PVE) ranging from 14.09 to 28.59% for daidzin, genistin, and total isoflavone were located on the same region of linkage group (LG) A1. These QTLs were further verified in another RIL population derived from Zheng 92116 × Qihuang 30 (ZQ). Meanwhile, the other four overlapping QTLs on linkage group B1, which were associated with glycitin content (qGLB1_1, qGLB1_2, qGLB1_3, qGLB1_4) and explained 16.52 to 29.83% of phenotypic variation, were also verified using the ZQ population. Moreover, the individuals with different genotypes at the common flanking SNP markers for these QTLs on LGs A1 and B1 in the two mapping populations showed significant different isoflavone content, which further validate the QTL mapping results. And also, some candidate genes might participate in the isoflavone biosynthesis processes were found in these stable QTL regions. Thus, the novel and stable QTLs identified and verified in this study could be applied in marker-assisted selection breeding or map-based candidate genes cloning in soybean seed isoflavone genetic improvement in future.     

Mapping quantitative trait loci underlying triploid endosperm traits

Endosperm, which is derived from two polar nuclei fusing with one sperm, is a triploid tissue in cereals. Endosperm tissue determines the grain quality of cereals. Improving grain quality is one of the important breeding objectives in cereals. However, current statistical methods for mapping quantitative trait loci (QTL) under diploid genetic control have not been effective for dealing with endosperm traits because of the complexity of their triploid inheritance. In this paper, we derive for the first time the conditional probabilities of F(3) endosperm QTL genotypes given different flanking marker genotypes in F(2) plants. Using these probabilities, we develop a multiple linear regression method implemented via the iteratively reweighted least-squares (IRWLS) algorithm and a maximum likelihood method (ML) implemented via the expectation-maximization (EM) algorithm to map QTL underlying endosperm traits. We use the mean value of endosperm traits of F(3) seeds as the dependent variable and the expectations of genotypic indicators for additive and dominance effect of a putative QTL flanked by a pair of markers as independent variables for IRWLS mapping. However, if an endosperm trait is measured quantitatively using a single endosperm sample, the ML mapping method can be used to separate the two dominance effects. Efficiency of the methods is verified through extensive Monte Carlo simulation studies. Results of simulation show that the proposed methods provide accurate estimates of both the QTL effects and locations with very high statistical power. With these methods, we are now ready to map endosperm traits, as we can for regular quantitative trait under diploid control.     

Identification of quantitative trait loci (QTL) for fruit-quality traits and number of weeks of flowering in the cultivated strawberry

Fruit quality and repeat flowering are two major foci of several strawberry breeding programs. The identification of quantitative trait loci (QTL) and molecular markers linked to these traits could improve breeding efficiency. In this work, an F₁ population derived from the cross ‘Delmarvel’ × ‘Selva’ was used to develop a genetic linkage map for QTL analyses of fruit-quality traits and number of weeks of flowering. Some QTL for fruit-quality traits were identified on the same homoeologous groups found in previous studies, supporting trait association in multiple genetic backgrounds and utility in multiple breeding programs. None of the QTL for soluble solids colocated with a QTL for titratable acids, and, although the total soluble solid contents were significantly and positively correlated with titratable acids, the correlation coefficient value of 0.2452 and independence of QTL indicate that selection for high soluble solids can be practiced independently of selection for low acidity. One genomic region associated with the total number of weeks of flowering was identified quantitatively on LG IV-S-1. The most significant marker, FxaACAO2I8C-145S, explained 43.3 % of the phenotypic variation. The repeat-flowering trait, scored qualitatively, mapped to the same region as the QTL. Dominance of the repeat-flowering allele was demonstrated by the determination that the repeat-flowering parent was heterozygous. This genomic region appears to be the same region identified in multiple mapping populations and testing environments. Markers linked in multiple populations and testing environments to fruit-quality traits and repeat flowering should be tested widely for use in marker-assisted breeding.     

Mapping of quantitative trait loci for canopy-wilting trait in soybean (Glycine max L. Merr)

Drought stress adversely affects [Glycine max (L.) Merr] soybean at most developmental stages, which collectively results in yield reduction. Little information is available on relative contribution and chromosomal locations of quantitative trait loci (QTL) conditioning drought tolerance in soybean. A Japanese germplasm accession, PI 416937, was found to possess drought resistance. Under moisture-deficit conditions, PI 416937 wilted more slowly in the field than elite cultivars and has been used as a parent in breeding programs to improve soybean productivity. A recombinant inbred line (RIL) population was derived from a cross between PI 416937 and Benning, and the population was phenotyped for canopy wilting under rain-fed field conditions in five distinct environments to identify the QTL associated with the canopy-wilting trait. In a combined analysis over environments, seven QTL that explained 75?% of the variation in canopy-wilting trait were identified on different chromosomes, implying the complexity of this trait. Five QTL inherited their positive alleles from PI 416937. Surprisingly, the other two QTL inherited their positive alleles from Benning. These putative QTL were co-localized with other QTL previously identified as related to plant abiotic stresses in soybean, suggesting that canopy-wilting QTL may be associated with additional morpho-physiological traits in soybean. A locus on chromosome 12 (Gm12) from PI 416937 was detected in the combined analysis as well as in each individual environment, and explained 27?% of the variation in canopy-wilting. QTL identified in PI 416937 could provide an efficient means to augment field-oriented development of drought-tolerant soybean cultivars.     

Identification of quantitative trait loci (QTL) for oil and protein contents and their relationships with other seed quality traits in Brassica juncea

A detailed RFLP-genomic map was used to study the genetics of oil, seed and meal protein and sum of oil and seed/meal protein contents in a recombinant doubled-haploid population developed by crossing black- and yellow-seeded Brassica juncea lines. Two yellow seed color genes (SC-B4, SC-A6) and one QTL for erucic acid content (E_1b) showed pleiotropic effect for oil, protein and sum of oil and seed/meal protein contents. Six (O-A1, O-A6, O-A9, O-B3, O-B4, O-B5) and five (SP-A1, SP-A9, SP-B4, SP-B6, SP-C) QTLs were significant for oil and seed protein contents, respectively. Tight linkage of three of these QTLs (SP-A1, SP-A9, SP-B4, O-A1, O-A9, O-B4), with opposite effects, poses challenge to the plant breeders for simultaneous improvement of negatively correlated (r = −0.7**) oil and seed protein contents. However, one QTL for oil content (O-B3) and two for seed protein content (SP-B6, SP-C) were found to be unlinked, which offer the possibility for simultaneous improvement of these two traits. QTLs significant for meal protein (MP-A1, MP-A6, MP-A9, MP-B5, MP-B6) were significant at least for oil, seed protein or sum of oil and seed/meal protein contents (T-A6, T-A7, T-B4, T-B5). Sum of oil and seed protein contents and sum of oil and meal protein contents had a perfect correlation, as well as same epistatic interactions and QTLs with similar additive effect. This indicates that protein in seed or meal has practically the same meaning for breeding purposes. Epistatic interactions were significant for the quality traits, and their linkage reflected association among the traits.     

Estimation of the contribution of quantitative trait loci (QTL) to the variance of a quantitative trait by means of genetic markers

The estimation of the contribution of an individual quantitative trait locus (QTL) to the variance of a quantitative trait is considered in the framework of an analysis of variance (ANOVA). ANOVA mean squares expectations which are appropriate to the specific case of QTL mapping experiments are derived. These expectations allow the specificities associated with the limited number of genotypes at a given locus to be taken into account. Discrepancies with classical expectations are particularly important for two-class experiments (backcross, recombinant inbred lines, doubled haploid populations) and F₂ populations. The result allows us firstly to reconsider the power of experiments (i.e. the probability of detecting a QTL with a given contribution to the variance of the trait). It illustrates that the use of classical formulae for mean squares expectations leads to a strong underestimation of the power of the experiments. Secondly, from the observed mean squares it is possible to estimate directly the variance associated with a locus and the fraction of the total variance associated to this locus (r _l ² ). When compared to other methods, the values estimated using this method are unbiased. Considering unbiased estimators increases in importance when (1) the experimental size is limited; (2) the number of genotypes at the locus of interest is large; and (3) the fraction of the variation associated with this locus is small. Finally, specific mean squares expectations allows us to propose a simple analytical method by which to estimate the confidence interval of r _l ² . This point is particularly important since results indicate that 95% confidence intervals for r _l ² can be rather wide:2–23% for a 10% estimate and 8–34% for a 20% estimate if 100 individuals are considered.     

Functional mapping imprinted quantitative trait loci underlying developmental characteristics

Background

Genomic imprinting, a phenomenon referring to nonequivalent expression of alleles depending on their parental origins, has been widely observed in nature. It has been shown recently that the epigenetic modification of an imprinted gene can be detected through a genetic mapping approach. Such an approach is developed based on traditional quantitative trait loci (QTL) mapping focusing on single trait analysis. Recent studies have shown that most imprinted genes in mammals play an important role in controlling embryonic growth and post-natal development. For a developmental character such as growth, current approach is less efficient in dissecting the dynamic genetic effect of imprinted genes during individual ontology.

Results

Functional mapping has been emerging as a powerful framework for mapping quantitative trait loci underlying complex traits showing developmental characteristics. To understand the genetic architecture of dynamic imprinted traits, we propose a mapping strategy by integrating the functional mapping approach with genomic imprinting. We demonstrate the approach through mapping imprinted QTL controlling growth trajectories in an inbred F₂ population. The statistical behavior of the approach is shown through simulation studies, in which the parameters can be estimated with reasonable precision under different simulation scenarios. The utility of the approach is illustrated through real data analysis in an F₂ family derived from LG/J and SM/J mouse stains. Three maternally imprinted QTLs are identified as regulating the growth trajectory of mouse body weight.

Conclusion

The functional iQTL mapping approach developed here provides a quantitative and testable framework for assessing the interplay between imprinted genes and a developmental process, and will have important implications for elucidating the genetic architecture of imprinted traits.     

Identification of quantitative trait loci controlling gene expression during the innate immunity response of soybean

Microbe-associated molecular pattern-triggered immunity (MTI) is an important component of the plant innate immunity response to invading pathogens. However, most of our knowledge of MTI comes from studies of model systems with relatively little work done with crop plants. In this work, we report on variation in both the microbe-associated molecular pattern-triggered oxidative burst and gene expression across four soybean (Glycine max) genotypes. Variation in MTI correlated with the level of pathogen resistance for each genotype. A quantitative trait locus analysis on these traits identified four loci that appeared to regulate gene expression during MTI in soybean. Likewise, we observed that both MTI variation and pathogen resistance were quantitatively inherited. The approach utilized in this study may have utility for identifying key resistance loci useful for developing improved soybean cultivars.