Differential Inactivation of Fungal Spores in Water and on Seeds by Ozone and Arc Discharge Plasma

Seed sterilization is essential for preventing seed borne fungal diseases. Sterilization tools based on physical technologies have recently received much attention. However, available information is very limited in terms of efficiency, safety, and mode of action. In this study, we have examined antifungal activity of ozone and arc discharge plasma, potential tools for seed sterilization. In our results, ozone and arc discharge plasma have shown differential antifungal effects, depending on the environment associated with fungal spores (freely submerged in water or infected seeds). Ozone inactivates Fusarium fujikuroi (fungus causing rice bakanae disease) spores submerged in water more efficiently than arc discharge plasma. However, fungal spores associated with or infecting rice seeds are more effectively deactivated by arc discharge plasma. ROS generated in water by ozone may function as a powerful fungicidal factor. On the other hand, shockwave generated from arc discharge plasma may have greatly contributed to antifungal effects on fungus associated with rice seeds. In support of this notion, addition of ultrasonic wave in ozone generating water has greatly increased the efficiency of seed disinfection.     

磁化弧光等离子体对小麦种子刺激效应的研究

磁化弧光等离子体用于提高种子活力的技术已经得到大面积的推广.实验通过不同剂量的等离子体处理小麦种子后进行盆栽实验,结果表明小麦增产幅度为10.51%-19.73%,产量因素构成中的作用顺序为：穗长〉分蘖数〉千粒重,最佳处理剂量为2.0 A.另外,从生理角度进行机理研究,经2.0 A的磁化弧光等离子体处理种子后电导率提高18.28%,小麦呼吸速率较对照提高了23.32%-35.59%;根系活力比对照增加40.7%;ATP含量在真叶和根系中分别增加65.15%和57.60%.     

Simultaneous Synthesis of Single-walled Carbon Nanotubes and Graphene in a Magnetically-enhanced Arc Plasma

Carbon nanostructures such as single-walled carbon nanotubes (SWCNT) and graphene attract a deluge of interest of scholars nowadays due to their very promising application for molecular sensors, field effect transistor and super thin and flexible electronic devices^1-4. Anodic arc discharge supported by the erosion of the anode material is one of the most practical and efficient methods, which can provide specific non-equilibrium processes and a high influx of carbon material to the developing structures at relatively higher temperature, and consequently the as-synthesized products have few structural defects and better crystallinity.To further improve the controllability and flexibility of the synthesis of carbon nanostructures in arc discharge, magnetic fields can be applied during the synthesis process according to the strong magnetic responses of arc plasmas. It was demonstrated that the magnetically-enhanced arc discharge can increase the average length of SWCNT ⁵, narrow the diameter distribution of metallic catalyst particles and carbon nanotubes ⁶, and change the ratio of metallic and semiconducting carbon nanotubes ⁷, as well as lead to graphene synthesis ⁸. Furthermore, it is worthwhile to remark that when we introduce a non-uniform magnetic field with the component normal to the current in arc, the Lorentz force along the J×B direction can generate the plasmas jet and make effective delivery of carbon ion particles and heat flux to samples. As a result, large-scale graphene flakes and high-purity single-walled carbon nanotubes were simultaneously generated by such new magnetically-enhanced anodic arc method. Arc imaging, scanning electron microscope (SEM), transmission electron microscope (TEM) and Raman spectroscopy were employed to analyze the characterization of carbon nanostructures. These findings indicate a wide spectrum of opportunities to manipulate with the properties of nanostructures produced in plasmas by means of controlling the arc conditions.     

Formation of Starting Plasma Flow in an Open Trap Using Arc Plasma Gun

Plasma Physics Reports - The system is described for the formation of the low-temperature starting plasma flow in the GOL-NB trap. The starting plasma is a target for capturing heating neutral...     

Plasma Parameters Controlled by a Movable Ion Sheath

It is shown that plasma parameters, such as the electron density, electron temperature, and plasma potential, in multidipole discharge plasma can be controlled by a negatively biased movable metal plate. Here, plasma is produced in the target region by a flux of energetic electrons coming from the source region of a double plasma device. Further, the thickness of the ion sheath formed in front of the biased metal plate varies depending on its axial position inside the cage.     

Study of the Ion Composition of the Diffuse Vacuum Arc on a Hot Cathode by the Time-of-Flight Method

Plasma Physics Reports - The study of a diffuse vacuum arc (DVA) is of interest in connection with the developing methods of plasma processing of the spent nuclear fuel (SNF). This type of...     

Influence of an External Circuit on the Plasma Parameters in the Channel of the Radio-Frequency Accelerator with a Closed Electron Drift

Plasma Physics Reports - The axial distribution of the plasma potential, electron density and temperature in a capacitive RF plasma source with the geometry of an accelerator with a closed electron...     

Launching of Microwaves into a Dense Plasma in Open Confinement Systems

A study is made of the propagation of microwave beams in a plasma and their passage through the critical surface. It is shown that, in order for microwaves to penetrate deeply into a dense plasma, it is necessary to launch them through a magnetic mirror at a slight angle to the device axis. The characteristic features of ray trajectories are analyzed both ahead of and behind the critical surface. In a dense plasma behind the critical surface, microwaves tend to run out of the axial region toward the plasma periphery. This tendency may be unfavorable for heating plasmas whose radial density profiles are strongly peaked about the system axis. The problems under analysis are particularly important for assessing the prospects for ECR heating of dense plasmas in open confinement systems.     

Ponderomotive Self-focusing of Surface Plasma Wave

A large amplitude surface plasma wave (SPW) propagating over a conductor–vaccum interface with Gaussian intensity profile transverse to the direction of propagation ( $ \widehat{z} $ ) and surface normal ( $ \widehat{x} $ ) is shown to undergo periodic self-focusing due to ponderomotive nonlinearity. The ponderomotive force on electrons arises due to the rapid decline in surface wave amplitude with the depth inside the conductor. In case of plasma, this leads to ambipolar diffusion of plasma, whereas in metals, only electron displacement occurs until the space charge balances the ponderomotive force on electrons. For a surface plasma wave, having Gaussian amplitude profile in y, the maximum electron density depression occurs on the axis (y?=?0) and the effect weakens as |y| increases. The axial portion of SPW thus travels with slower phase velocity than the nonaxial portion leading to self-focusing.     

Study of Plasma Parameters and Deposition Rate of Titanium Thin Film in a DC Magnetron Sputtering Method

Plasma Physics Reports - The plasma parameters like electron temperature (Te) and electron density (ne) on the deposition rate in turn thickness of titanium thin film at different axial and radial...     

笑弧在面部宽窄不同的个体中对微笑美学的影响

目的:研究面部宽窄不同女性的笑弧对微笑美学的影响。方法:选取女性正位微笑像1张,应用Adobe Photoshop CS5软件对笑弧和面部宽窄进行修改,由正畸医生和非专业人士对照片的微笑魅力值进行评判。结果:笑弧和面部宽窄程度在魅力微笑的判别中无交互作用(P0.05)。两组对理想的笑弧、略窄的面型和适宜的面型的魅力微笑判别分值较高(P0.05)。非专业人群中,在三种笑弧中,除了很窄的面型,魅力微笑的分值均随着面型的增宽降低(P0.05)。专业人群中,对于平坦的笑弧,除了很宽的面型,魅力微笑的分值随着面型的增宽而增加(P0.05);对于理想的笑弧,魅力微笑的分值随着面型的过宽或过窄而降低,但仍高于其他两种笑弧(P0.05);对于弯曲的笑弧,除了很窄的面型,魅力微笑的分值随着面型的增宽而降低(P0.05)。结论:笑弧和面部宽窄对魅力微笑的判别具有一定影响。不同人群对笑弧及面部宽窄与微笑美学的认识也存在差异,在正畸治疗中应根据患者面部宽窄合理的选择治疗方案。     

Membrane Morphologies Induced by Arc-Shaped Scaffolds Are Determined by Arc Angle and Coverage

The intricate shapes of biological membranes such as tubules and membrane stacks are induced by proteins. In this article, we systematically investigate the membrane shapes induced by arc-shaped scaffolds such as proteins and protein complexes with coarse-grained modeling and simulations. We find that arc-shaped scaffolds induce membrane tubules at membrane coverages larger than a threshold of ～40%, irrespective of their arc angle. The membrane morphologies at intermediate coverages below this tubulation threshold, in contrast, strongly depend on the arc angle. Scaffolds with arc angles of about 60°, akin to N-BAR domains, do not change the membrane shape at coverages below the tubulation threshold, whereas scaffolds with arc angles larger than about 120° induce double-membrane stacks at intermediate coverages. The scaffolds stabilize the curved membrane edges that connect the membrane stacks, as suggested for complexes of reticulon proteins. Our results provide general insights on the determinants of membrane shaping by arc-shaped scaffolds.     

Stability of Ion Flow and Role of Boundary Conditions in a Simplified Model of the E × B Plasma Accelerator with a Uniform Electron Mobility

Plasma Physics Reports - Resistive oscillations of axial plasma with ionization effects are analyzed in configuration similar to the Hall effect thrusters. From analysis of stationary equations we...     

Broadband Linear-to-Circular Polarization Conversion Realized by the Solid State Plasma Metasurface

In this paper, a solid-state plasma metasurface (SSPM) for linear-to-circular polarization conversion is designed and investigated. The unit cell of such a SSPM consists of three layers from bottom to top, which are the copper coating, the dielectric layer, and the solid-state plasma resonators, respectively. By exciting solid-state plasma resonance units in different regions, we successfully achieved two operating modes (modes I and II). In mode I, the axial ratio band which is less than 3 dB (3 dB AR band) is mainly obtained in 14.34–19.61 GHz (the relative bandwidth is 31.25%). When the proposed SSPM is regulated to mode II, the 3 dB AR band is changed to 8.81–14.34 GHz (the relative bandwidth is 40.90%). The polarization conversion rate, phase difference, AR curves, and surface current diagrams are analyzed to explore the performances of the proposed SSPM. Our design promotes the potential applications of tunable devices.

     

Mechanical and Chemical Characterization of a TiC/C System Synthesized Using a Focus Plasma Arc

Titanium carbide-graphite (TiC/C) composite was successfully synthesized from Ti and C starting elemental powders using self-propagating high-temperature synthesis technique in an ultra-high plasma inert medium in a single stage. The TiC was exposed to a high-temperature inert medium to allow recrystallization. The product was then characterized using field emission scanning electron microscopy (FESEM) coupled with energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD), Rietveld refinement, nanoindentation, and micro-hardness to determine the product’s properties. The recorded micro-hardness of the product was 3660 HV, which is a 14% enhancement and makes is comparable to TiC materials.     

Plasma protein fractionation with advanced membrane adsorbents

High capacity membrane adsorbents have been used as a stationary phase for the preparative chromatographic purification of human serum albumin. A two-step ion exchange fractionation scheme yields albumin with 98% purity from clarified, microfiltrated, and desalted human plasma. Experiments with laboratory and pilot scale membrane modules are compared to literature data obtained with conventional Fast Flow Sepharose in a similar purification protocol. Increased productivity in combination with excellent reproducibility and stability was found using the membrane adsorbents. Scale-up of the process based on standard microfiltration equipment was successful but resulted in reduced capacity and productivity due to deteriorated flow characteristics of the module. This was attributed to the effects of substantial axial dispersion in the pilot scale module. Methods to reduce this limitation were identified. The concept of membrane adsorption chromatography for the fast purification of proteins is illustrated and engineering aspects important for the process design are discussed. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 54: 181-189, 1997.     

Experiments on the transportation of a magnetized plasma stream in the GOL-3 facility

The program of the deep upgrade of the GOL-3 multiple-mirror trap is presented. The upgrade is aimed at creating a new GOL-NB open trap located at the GOL-3 site and intended to directly demonstrate the efficiency of using multiple-mirror magnetic cells to improve longitudinal plasma confinement in a gasdynamic open trap. The GOL-NB device will consist of a new central trap, adjoint cells with a multiple-mirror magnetic field, and end tanks (magnetic flux expanders). Plasma in the central trap will be heated by neutral beam injection with a power of up to 1.5 MW and duration of 1 ms. At present, physical experiments directed at developing plasma technologies that are novel for this facility are being carried out using the 6-m-long autonomous part of the GOL-3 solenoid. The aim of this work was to develop a method for filling the central trap with a low-temperature start plasma. Transportation of a plasma stream from an arc source over a distance of 3 m in a uniform magnetic field with an induction of 0.5–4.5 T is demonstrated. In these experiments, the axial plasma density was (1–4) × 10²⁰ m^–3 and the mirror ratio varied from 5 to 60. In general, the experiments confirmed the correctness of the adopted decisions for the start plasma source of the GOL-NB device.     

Plasma Reflectarrays

This paper investigates the design of four different configurations of plasma reflectarrays. The results provide insight into different radiation characteristics of plasma reflectarrays. The proposed unit cell consists of a cubic glass box filled with argon gas energized with applied AC voltage. The reflectarray reflection coefficient phase variation is achieved by varying the plasma frequency of the energized gas. Four plasma reflectarrays for satellite applications at 12 GHz are proposed (centre feed centre beam, centre feed offset beam, offset feed centre beam, and finally, offset feed offset beam). The finite integration technique is used to analyse the plasma reflectarray.     

离心式机械单采血浆管路、贮存袋的研究

目的：研究单采血浆中两种耗材－管路和贮存袋，材料和方法：以压力监测器接头（DPM）、导管流量和贮存袋耐寒性的研究关键。并与国内外同类产品或材料作比较，结果：DPM必须具有适宜的透气性（感应时间≤2s）、阻血性（能耐受40Kpa,40s），滤除率（0.5um粒子，≥90％），导管流量的准确性（与机器设定值误差＜5％），稳定性（采集过程中流量误差＜5％）可通过控制导管内径（3.08-3.24mm)和选择弹性PVC材料来解决，贮存袋选用耐寒PVC料。扫描电镜证实韧性断裂。结论：研制成的管路和PCS^2机器适配能取代进口同类产品，研制的贮存袋能低温保存血浆，破损率小于2‰。     

Polyynes and Cyanopolyynes: Their Synthesis with the Carbon Arc Gives the Same Abundances Occurring in Carbon-Rich Stars

Carbon vapour generated from a carbon arc or by laser ablation of graphite is reactive with simple molecules and atoms producing end-capped polyyne chains. With these techniques both hydrogen-terminated polyynes as well as monocyano- and dicyanopolyynes have been produced. Experiments based on arcing graphite electrodes can reproduce the molecular distribution of polyynes existing around carbon-rich AGB stars. In fact, it has been found that the relative abundances of the polyynes produced in carbon arc in vacuum decreases by a factor between 3 and 5 as the chain length increases by a C₂ unit. An analogous trend has been observed both for polyynes and cyanopolyynes in the circumstellar environment around carbon-rich stars. This fact suggests that the mechanism of formation of the polyynes in the carbon arc may be similar to that occurring in the surroundings of the carbon-rich stars. Polyynes and cyanopolyynes represent authentic prebiotic molecules which appear quite ubiquitous in the cosmos and should have played a role in the early organic chemistry preceding the appearance of life. Presented at: National Workshop on Astrobiology: Search for Life in the Solar System, Capri, Italy, 26 to 28 October, 2005.