Cruciform-resolvase interactions in supercoiled DNA

T4 endonuclease VII, which cleaves Holliday-like junctions in DNA, specifically cleaves short inverted repeats in supercoiled plasmids. These sequences are subject to site-specific cleavage by single-strand-specific nucleases, and cruciform formation has been suggested as an explanation for this observation. This proposal is greatly strengthened by the present data, since a formal analogy between cruciform structures and Holliday junctions exists. Resolution of a variety of unrelated cruciform sequences demonstrates that the cleavage process results in a linear molecule with hairpin ends and single ligatable nicks at positions corresponding to the stem-base of the cruciform. In two examples mapped in detail, the cleavages are exclusively introduced at two or three nucleotides from the end of the symmetric sequence at the 5' side on each strand. These studies demonstrate the potential of endonuclease VII as a probe of cruciform structure and the utility of short cruciform structures as Holliday junction models.     

Escherichia coli RuvC protein is an endonuclease that resolves the Holliday structure.

Genetic evidence suggests that the Escherichia coli ruvC gene is involved in DNA repair and in the late step of RecE and RecF pathway recombination. To study the biochemical properties of RuvC protein, we overproduced and highly purified the protein. By employing model substrates, we examined the possibility that RuvC protein is an endonuclease that resolves the Holliday structure, an intermediate in genetic recombination in which two double-stranded DNA molecules are linked by single-stranded crossover. RuvC protein cleaves cruciform junctions, which are formed by the extrusion of inverted repeat sequences from a supercoiled plasmid and which are structurally analogous to Holliday junctions, by introducing nicks into strands with the same polarity. The nicked ends are ligated by E.coli or T4 DNA ligases. Analysis of the cleavage sites suggests that DNA topology rather than a particular sequence determines the cleavage site. RuvC protein also cleaves Holliday junctions which are formed between gapped circular and linear duplex DNA by the function of RecA protein. However, it does not cleave a synthetic four-way junction that does not possess homology between arms. The active form of RuvC protein, as studied by gel filtration, is a dimer. This is mechanistically suited for an endonuclease involved in swapping DNA strands at the crossover junctions. From these properties of RuvC protein and the phenotypes of the ruvC mutants, we infer that RuvC protein is an endonuclease that resolves Holliday structures in vivo.     

Real-time detection of cruciform extrusion by single-molecule DNA nanomanipulation

During cruciform extrusion, a DNA inverted repeat unwinds and forms a four-way junction in which two of the branches consist of hairpin structures obtained by self-pairing of the inverted repeats. Here, we use single-molecule DNA nanomanipulation to monitor in real-time cruciform extrusion and rewinding. This allows us to determine the size of the cruciform to nearly base pair accuracy and its kinetics with second-scale time resolution. We present data obtained with two different inverted repeats, one perfect and one imperfect, and extend single-molecule force spectroscopy to measure the torque dependence of cruciform extrusion and rewinding kinetics. Using mutational analysis and a simple two-state model, we find that in the transition state intermediate only the B-DNA located between the inverted repeats (and corresponding to the unpaired apical loop) is unwound, implying that initial stabilization of the four-way (or Holliday) junction is rate-limiting. We thus find that cruciform extrusion is kinetically regulated by features of the hairpin loop, while rewinding is kinetically regulated by features of the stem. These results provide mechanistic insight into cruciform extrusion and help understand the structural features that determine the relative stability of the cruciform and B-form states.     

Resolution of synthetic Holliday junctions in DNA by an endonuclease activity from calf thymus.

Extracts of calf thymus have been fractionated to reveal a nuclease activity that specifically cleaves model Holliday junctions in vitro. The products of cleavage are unbranched linear duplex DNA molecules. Using synthetic four-way junctions, we show that the major sites of cutting are diametrically opposed, at sites one nucleotide from the base of the junction. Other types of four-way junctions, including pseudo-cruciform structures and cruciforms extruded from supercoiled plasmids, are also cleaved by the nuclease. The Mr of the partially purified activity, determined by gel filtration, is approximately 75,000. The calf thymus enzyme provides the first example of an endonuclease from a higher eukaryote that acts specifically on branch points in DNA, and indicates that junction-resolving proteins are normal constituents of somatic cells.     

An archaeal Holliday junction resolving enzyme from Sulfolobus solfataricus exhibits unique properties

The rearrangement and repair of DNA by homologous recombination often involves the creation of Holliday junctions, which must be cleaved by junction-specific endonucleases to yield recombinant duplex DNA products. Holliday junction resolving enzymes are a ubiquitous class of proteins with diverse structural and mechanistic characteristics. We have characterised an endonuclease (Hje) from the thermophilic crenarchaeote Sulfolobus solfataricus that exhibits a high degree of specificity for Holliday junctions via an apparently novel mechanism. Hje resolves four-way DNA junctions by the introduction of paired nicks in a reaction that is independent of the local nucleotide sequence, but is restricted solely to strands that are continuous in the stacked-X form of the junction. Three-way DNA junctions are cleaved only when the presence of a bulge in one strand allows the junction to stack in an analogous manner to four-way junctions. These properties differentiate Hje from all other known junction resolving enzymes.     

Analysis of branched nucleic acid structure using comparative gel electrophoresis

Electrophoresis in polyacrylamide gels provides a simple yet powerful means of analyzing the relative disposition of helical arms in branched nucleic acids. The electrophoretic mobility of DNA or RNA with a central discontinuity is determined by the angle subtended between the arms radiating from the branchpoint. In a multi-helical branchpoint, comparative gel electrophoresis can provide a relative measure of all the inter-helical angles and thus the shape and symmetry of the molecule. Using the long-short arm approach, the electrophoretic mobility of all the species with two helical arms that are longer than all others is compared. This can be done as a function of conditions, allowing the analysis of ion-dependent folding of branched DNA and RNA species. Notable successes for the technique include the four-way (Holliday) junction in DNA and helical junctions in functionally significant RNA species such as ribozymes. Many of these structures have subsequently been proved correct by crystallography or other methods, up to 10 years later in the case of the Holliday junction. Just as important, the technique has not failed to date. Comparative gel electrophoresis can provide a window on both fast and slow conformational equilibria such as conformer exchange in four-way DNA junctions. But perhaps the biggest test of the approach has been to deduce the structures of complexes of four-way DNA junctions with proteins. Two recent crystallographic structures show that the global structures were correctly deduced by electrophoresis, proving the worth of the method even in these rather complex systems. Comparative gel electrophoresis is a robust method for the analysis of branched nucleic acids and their complexes.     

T7 endonuclease I resolves Holliday junctions formed in vitro by RecA protein.

T7 endonuclease I is known to bind and cleave four-way junctions in DNA. Since these junctions serve as analogues of Holliday junctions that arise during genetic recombination, we have investigated the action of T7 endonuclease I on recombination intermediates containing Holliday junctions. We find that addition of T7 endonuclease I to strand exchange reactions catalysed by RecA protein of Escherichia coli leads to the formation of duplex products that correspond to 'patch' and 'splice' type recombinants. Resolution of the recombination intermediates occurs by the introduction of nicks at the site of the Holliday junction. The recombinant molecules contain 5'-phosphate and 3'-hydroxyl termini which may be ligated to restore the integrity of the DNA.     

Inverted repeats,stem-loops,and cruciforms: Significance for initiation of DNA replication

Inverted repeats occur nonrandomly in the DNA of most organisms. Stem-loops and cruciforms can form from inverted repeats. Such structures have been detected in pro- and eukaryotes. They may affect the supercoiling degree of the DNA, the positioning of nucleosomes, the formation of other secondary structures of DNA, or directly interact with proteins. Inverted repeats, stem-loops, and cruciforms are present at the replication origins of phage, plasmids, mitochondria, eukaryotic viruses, and mammalian cells. Experiments with anti-cruciform antibodies suggest that formation and stabilization of cruciforms at particular mammalian origins may be associated with initiation of DNA replication. Many proteins have been shown to interact with cruciforms, recognizing features like DNA crossovers, four-way junctions, and curved/bent DNA of specific angles. A human cruciform binding protein (CBP) displays a novel type of interaction with cruciforms and may be linked to initiation of DNA replication. © 1996 Wiley-Liss, Inc.     

Cruciform cutting endonucleases from Saccharomyces cerevisiae and phage T4 show conserved reactions with branched DNAs.

We have purified a cruciform DNA resolving endonuclease (Endo X3) greater than 1000-fold from crude extracts of mitotically growing Saccharomyces cerevisiae. The enzyme shows high specificity for DNAs with secondary structures and introduces characteristic patterns of staggered 'nicks' in the immediate vicinity of the structure. The following substrates were analyzed in detail: (i) naturally occurring four-way X junctions in cruciform DNA of a supercoiled plasmid; (ii) synthetic four-way X junctions with arms of 9 bp; (iii) synthetic three-way Y junctions with arms of 10 bp; and (iv) heteroduplex loops with 19 nucleotides in the loop. Cleavages were always found in the double stranded portion of the DNA, located immediately adjacent to the junction of the respective structure. The Endo X3 induced cleavage patterns are identical or very similar to the cleavage patterns induced in the same substrates by endonuclease VII (Endo VII) from phage T4. Furthermore, the activity of Endo X3 is completely inhibited in the presence of anti-Endo VII antiserum. Endo X3 has an apparent mol. wt of 43,000 daltons, determined by gel filtration and of approximately 18,000 daltons in SDS--polyacrylamide gels. Maximum activity of the enzyme was obtained in the presence of 10 mM MgCl2 at 31 degrees C in Tris-HCl buffer over a broad pH range with a maximum approximately 8.0. About 70% of maximal activity was obtained when Mg2+ was replaced by equimolar amounts of Mn2+ or Ca2+.     

New insight into the recognition of branched DNA structure by junction-resolving enzymes

Junction-resolving enzymes are nucleases that exhibit structural selectivity for the four-way (Holliday) junction in DNA. In general, these enzymes both recognize and distort the structure of the junction. New insight into the molecular recognition processes has been provided by two recent co-crystal structures of resolving enzymes bound to four-way DNA junctions in highly contrasting ways. T4 endonuclease VII binds the junction in an open conformation to an approximately flat binding surface whereas T7 endonuclease I envelops the junction, which retains a much more three-dimensional structure. Both proteins make contacts with the DNA backbone over an extensive area in order to generate structural specificity. The comparison highlights the versatility of Holliday junction resolution, and extracts some general principles of recognition.     

A novel type of interaction between cruciform DNA and a cruciform binding protein from HeLa cells.

We recently identified and enriched a protein (CBP) from HeLa cells with binding specificity for cruciform-containing DNA. We have now studied the interaction of CBP with stable cruciform DNA molecules containing the 27 bp palindrome of SV40 on one strand and an unrelated 26 bp palindrome on the other strand by hydroxyl radical footprinting. The CBP-DNA interaction is localized to the four-way junction at the base of the cruciforms. CBP appears to interact with the elbows of the junctions in an asymmetric fashion. Upon CBP binding, structural distortions were observed in the cruciform stems and in a DNA region adjacent to the junction. These features distinguish CBP from other cruciform binding proteins, which bind symmetrically and display exclusively either contacts with the DNA backbone or structural alterations in the DNA.     

The endonuclease Hje catalyses rapid, multiple turnover resolution of Holliday junctions

Holliday junction-resolving enzymes are ubiquitous, structure-specific endonucleases that resolve four-way DNA junctions by the introduction of paired nicks in opposing strands, and are required for homologous recombination, double-strand break repair, recombination-dependent restart of stalled or collapsed DNA replication forks, and phage DNA processing. Here, we present the first steady-state kinetic characterisation of a junction-resolving enzyme; the Hje endonuclease from Sulfolobus solfataricus. We demonstrate that substrate turnover by Hje is sequence-independent and limited largely by the rate of cleavage of the phosphodiester bonds of the bound Holliday junction substrate, rather than substrate association or product dissociation. Reaction rates under multiple turnover conditions compare favourably with type II restriction enzymes. These properties, coupled with a high level of specificity for four-way junctions over all other DNA substrates, make Hje a suitable enzyme for applications requiring the detection and cleavage of Holliday junctions in vitro.     

Effect of base composition at the center of inverted repeated DNA sequences on cruciform transitions in DNA

We have analyzed the effect of base composition at the center of symmetry of inverted repeated DNA sequences on cruciform transitions in supercoiled DNA. For this we have constructed two series of palindromic DNA sequences: one set with differing center and one set with differing center and arm sequences. The F series consists of two 96-base pair perfect inverted repeats which are identical except for the central 10 base pairs which consist of pure AT or GC base pairs. The S series was constructed such that the overall base composition of the inverted repeats was identical but in which the positioning of blocks of AT- and GC-rich sequences varied. The rate of cruciform formation for the inverted repeats in plasmid pUC8 was dramatically influenced by the 8-10 base pairs at the center of the inverted repeat. Inverted repeats with 8-10 AT base pairs in the center were kinetically much more active in cruciform formation than inverted repeats with 8-10 GC base pairs in the center. These experiments show a dominant influence of the center sequences of inverted repeats on the rate of cruciform formation.     

Inverted repeat sequences can influence the melting transitions of linear DNAs

The influence of inverted repeat sequences on the melting transitions of linear DNAs has been examined. Derivative melting curves (DMC) of a 514 base pair (bp) DNA, seven subfragments of this DNA, and four other DNAs have been compared to predictions of DNA melting theory. The 514-bp DNA contains three inverted repeat sequences that can form cruciform structures in supercoiled DNA. We refer to these sequences as c-inverted repeats. Previous work showed that the DMC of this DNA, unlike a number of other DNAs, is not accurately predicted by DNA melting theory. Since the theoretical model does not include hairpin-like structures, it was suggested that hairpin or cruciform formation in these inverted repeats may be responsible for this discrepancy. Our results support this hypothesis. Predicted DMCs are in good agreement with DNAs with no inverted repeats, or inverted repeats not evident in supercoiled DNA. Differences between the theoretical and experimental Tm's are less than or equal to 0.3 degrees C. DNA molecules that contain one or more of the three c-inverted repeats are not as accurately predicted. Experimental Tm values are lower than predicted values by 0.7-3.8 degrees C. It is concluded that some inverted repeat sequences can form hairpin-like structures during the melting of linear DNAs. These structures appear to lower overall DNA stability.     

Quantitation of metal ion and DNA junction binding to the Holliday junction endonuclease Cce1

Cce1 is a magnesium-dependent Holliday junction endonuclease involved in the resolution of recombining mitochondrial DNA in Saccharomyces cerevisiae. Cce1 binds four-way DNA junctions as a dimer, opening the junction into an extended, 4-fold symmetric structure, and resolves junctions by the introduction of paired nicks in opposing strands at the point of strand exchange. In the present study, we have examined the interactions of wild-type Cce1 with a noncleavable four-way DNA junction and metal ions (Mg(2+) and Mn(2+)) using isothermal titration calorimetry, EPR, and gel electrophoresis techniques. Mg(2+) or Mn(2+) ions bind to Cce1 in the absence of DNA junctions with a stoichiometry of two metal ions per Cce1 monomer. Cce1 binds to four-way junctions with a stoichiometry of two Cce1 dimers per junction molecule in the presence of EDTA, and one dimer of Cce1 per junction in 15 mM magnesium. The presence of 15 mM Mg(2+) dramatically reduces the affinity of Cce1 for four-way DNA junctions, by about 900-fold. This allows an estimation of DeltaG degrees for stacking of four-way DNA junction 7 of -4.1 kcal/mol, consistent with the estimate of -3.3 to -4.5 kcal/mol calculated from branch migration and NMR experiments [Overmars and Altona (1997) J. Mol. Biol. 273, 519-524; Panyutin et al. (1995) EMBO J. 14, 1819-1826]. The striking effect of magnesium ions on the affinity of Cce1 binding to the four-way junction is predicted to be a general one for proteins that unfold the stacked X-structure of the Holliday junction on binding.     

Processing of intermediates in recombination and DNA repair: identification of a new endonuclease that specifically cleaves Holliday junctions.

The formation and subsequent resolution of Holliday junctions are critical stages in recombination. We describe a new Escherichia coli endonuclease that resolves Holliday intermediates by junction cleavage. The 14 kDa Rus protein binds DNA containing a synthetic four-way junction (X-DNA) and introduces symmetrical cuts in two strands to give nicked duplex products. Rus also processes Holliday intermediates made by RecA into products that are characteristic of junction resolution. The cleavage activity on X-DNA is remarkably similar to that of RuvC. Both proteins preferentially cut the same two strands at the same location. Increased expression of Rus suppresses the DNA repair and recombination defects of ruvA, ruvB and ruvC mutants. We conclude that all ruv strains are defective in junction cleavage, and discuss pathways for Holliday junction resolution by RuvAB, RuvC, RecG and Rus.