The vascularized pig fibula bone flap model: effects of multiple segmental osteotomies on growth and viability

Previous work by this laboratory introduced the pig fibula bone flap as a model for the study of the pathophysiology of vascularized bone flaps. Anatomic and hemodynamic studies demonstrated a significant (p < 0.05) decrease in vascular perfusion after a series of segmental osteotomies and rigid fixation (lag screws and miniplates) in the distal end of the flap, suggesting that blood flow to the distal osteotomized segment of the flap may be impaired. Killing the animals after blood flow studies precluded assessment of the effect of these hemodynamic changes on bone healing. Therefore, the aim of this study was to assess the pig fibula bone flap model with respect to viability, healing, and subsequent growth after multiple segmental osteotomies and rigid fixation to contribute to the understanding of vascularized bone flap pathophysiology. Yorkshire pigs (20 to 25 kg) were used for all experiments. Eight pigs underwent unilateral elevation of a vascularized fibula bone flap, which was osteotomized into three segments and orthotopically rigidly fixed using a 2.4-mm mandibular reconstruction plate. The left fibula remained as the control. Fluorochrome labels were injected to assess bone viability and turnover, and both fibulae were assessed for growth radiologically. The fibulae were harvested 21 days postoperatively (when the animals were killed), and bone healing was assessed histologically and clinically. There were no significant differences in preoperative and postoperative lengths of the osteotomized fibulae compared with the controls, suggesting that there was no impairment of growth potential after multiple segmental osteotomies and rigid fixation. Significant (p < 0.05) bony hypertrophy of the osteotomized fibulae was noted when compared with controls. Mobility was observed in 3 of the 32 osteotomies (9 percent), occurring across one proximal and two distal osteotomies in association with failure of fixation. However, histologic and fluorochrome assessment confirmed the viability of all bone segments, as supported by the presence of tetracycline given 2 days postoperatively. The pig fibula bone flap model is well tolerated by the pig. Multiple segmental osteotomies and rigid fixation, previously associated with a significant decrease in blood flow in the distal segment, did not impair either growth potential, viability, or healing ability. It is suggested that the pig fibula is a suitable model for the study of bone flap pathophysiology.     

Fibula free flap: a new method of mandible reconstruction

The fibula was investigated as a donor site for free-flap mandible reconstruction. It has the advantages of consistent shape, ample length, distant location to allow a two-team approach, and low donor-site morbidity. It can be raised with a skin island for composite-tissue reconstruction. Twelve segmental mandibular defects (average 13.5 cm) were reconstructed following resection for tumor, most commonly epidermoid carcinoma. Five defects consisted of bone alone, and four others had only a small amount of associated intraoral soft-tissue loss. Eleven patients underwent primary reconstructions. At least two osteotomies were performed on each graft, and miniplates were used for fixation in 11 patients. Six patients received postoperative radiation, and two patients received postoperative chemotherapy. The flaps survived in all patients. All osteotomies healed primarily. The septocutaneous blood supply was generally not adequate to support a skin island for intraoral soft-tissue replacement. The aesthetic result of the reconstruction was excellent in most patients, particularly in "bone only" defects. There was no long-term donor-site morbidity.     

Osteotomy to treat malocclusion following reconstruction of the mandible with the free fibula flap

Malocclusion may result after free fibula flap reconstruction of the mandible, because of inadequate positioning of the temporomandibular joint, inaccurate contouring of the reconstruction plate, or subsequent fracture of a miniplate. Factors that alter the vascularity of the transplanted fibula may also result in a delayed presentation of malocclusion. Seven cases are presented, in which primary surgical treatment consisted of segmental mandibulectomy and reconstruction with a free fibula osteoseptocutaneous flap. Fixation was achieved with a reconstruction plate in five cases and a miniplate in two cases. Malocclusion was corrected with an osteotomy performed at the junction of the fibula and the native mandible. The new osteotomy sites were fixed with miniplates and maintained with intermaxillary fixation. Complete bony union was achieved at the osteotomy sites. The correction of malocclusion was successful in all cases, and all patients have resumed a normal diet. This report demonstrates that osteotomy and realignment of the mandible are effective for the secondary correction of malocclusion after mandibular reconstruction with the free fibula osteoseptocutaneous flap.     

Evaluation of bone height in osseous free flap mandible reconstruction: an indirect measure of bone mass

Osseous free flaps have become the preferred method of mandibular reconstruction after oncologic surgical ablation. To elucidate the long-term effects of free flap mandibular reconstruction on bone mass, maintenance or reduction in bone height over time was used as an indirect measure of preservation or loss in bone mass. Factors potentially influencing bone mass preservation were evaluated; these included site of reconstruction (central, body, ramus), patient age, length of follow-up, adjuvant radiotherapy, and the delayed placement of osseointegrated dental implants. A retrospective analysis of patients undergoing osseous free flap mandible reconstruction for oncologic surgical defects between 1987 and 1995 was performed. Postoperative Panorex examinations were used to evaluate bone height and bony union after osteotomy. Fixation hardware was used as a reference to eliminate magnification as a possible source of error in measurement. There were 48 patients who qualified for this study by having at least 24 months of follow-up. There were 27 male and 21 female patients, with a mean age of 45 years (range, 5 to 75 years). Mandibular defects were anterior (24) and lateral (24). Osseous donor sites included the fibula (35), radius (6), scapula (4), and ilium (3). There were between zero and four segmental osteotomies per patient (excluding the ends of the graft). Nineteen percent of all patients had delayed placement of osseointegrated dental implants. Initial Panorex examinations were taken between 1 and 9 months postoperatively (mean, 2 months). Follow-up Panorex examinations were taken 24 to 104 months postoperatively (mean, 47 months). The bony union rate after osteotomy was 97 percent. Bone height measurements were compared by site and type of reconstruction. The mean loss in fibula height by site of reconstruction was 2 percent in central segments, 7 percent in body segments, and 5 percent in ramus segments. The mean loss in bone height after radial free flap mandible reconstruction was 33 percent in central segments and 37 percent in body segments; ramus segments did not lose height. The central and body segments reconstructed with scapular free flaps did not lose height, but one ramus segment lost 20 percent of height. There was no loss in bone height in mandibular body reconstruction with the ilium free flap. Fibula free flaps did not significantly lose bone height when evaluated with respect to age, follow-up, radiation therapy, or dental implant placement. The retention in bone height demonstrated in this study suggests that bone mass is preserved after osseous free flap mandible reconstruction. The greatest amount of bone loss was seen after multiply osteotomized radial free flaps were used for central mandibular reconstruction. The ability of the fibula free flap to maintain mass over time, coupled with its known advantages, further supports its use as the "work horse" donor site for mandible reconstruction.     

Segmental mandibulectomy and immediate free fibula osteoseptocutaneous flap reconstruction with endosteal implants: an ideal treatment method for mandibular ameloblastoma

Thirteen patients with large ameloblastomas of the mandible underwent segmental mandibulectomy and immediate reconstruction, with simultaneous placement of osseointegrated implants. All patients received palatal mucosal grafts around the dental implants 6 to 10 months after surgical treatment and received implant-supported prostheses another 1 to 2 months later. There were five female and eight male patients, with a mean age of 32 years (range, 17 to 50 years). The mean length of the mandibular defect was 8.8 cm (range, 5 to 13 cm). All free fibula flap procedures were successful, with no reexplorations or partial flap losses. There was no clinical or radiographic evidence of failure during the osseointegration process for any implant. With functional occlusal loading, the marginal bone loss around the implants was less than 1.5 mm in a mean follow-up period of 40 months (range, 18 to 70 months). There were no recurrences during that time. The technique described allows improved access to the bone at the time of reconstruction, immediate assessment of alveolar ridge relationships, and accurate fixation of the implant-fibula construct. The advantages of this procedure include a reduced risk of recurrence with segmental resection, reliable mandibular reconstruction, and reduction of the number of surgical procedures, allowing full oral rehabilitation in a shorter time. It is concluded that segmental mandibulectomy and immediate vascularized fibula osteoseptocutaneous flap reconstruction, with simultaneous placement of osseointegrated implants, represent an ideal treatment method for large ameloblastomas of the mandible.     

Osteoradionecrosis of the mandible after oromandibular cancer surgery

Although postoperative radiotherapy has proved effective in improving local control and survival in patients with head and neck cancers, its complications, especially mandibular osteoradionecrosis, reduce the quality of life. Mandibular surgery before the radiotherapy adds an additional risk factor for osteoradionecrosis. This study reviews patients in Chang Gung Memorial Hospital, Taipei, Taiwan, over a 10-year period, who underwent intraoral cancer resection followed by postoperative radiotherapy and thereafter developed osteoradionecrosis of the mandible. A total of 24 men and three women with a mean age of 49.9 years were identified and included in the study. In 10 cases, tumor resection was performed with a marginal mandibulectomy; in eight cases, tumor resection was performed after mandibular osteotomy; and in three cases, a segmental mandibulectomy was performed, and the defect was reconstructed with a fibula osteoseptocutaneous flap. In six cases, tumor excisions were performed without interfering with the mandibular continuity. Patients received postoperative external beam radiotherapy into the primary site and the neck, with a mean dose (+/-SD) of 5900 +/- 1300 cGy in an average of 35 fractions during an average of 6.5 weeks. The average elapsed time between the end of radiation therapy and clinical diagnosis of osteoradionecrosis of the mandible was 11.2 months (range, 2 to 36 months). The time elapse between the end of the radiation therapy and the diagnosis of osteoradionecrosis was influenced by initial treatment (Kruskal-Wallis test: n = 27, chi-square = 12.884, p < 0.005), and this period was shorter if the mandibular osteotomy or marginal mandibulectomy was performed (the two lowest mean ranks in the test). However, if the initial surgery resulted in a segmental mandibulectomy reconstructed with a fibula osteoseptocutaneous flap, onset of the osteoradionecrosis was relatively late (Kruskal-Wallis test: n = 21, chi-square = 7.731, p = 0.052). After resection of osteoradionecrotic bone and surrounding soft tissue, 22 patients underwent reconstructive procedures with a fibula osteoseptocutaneous flap, and five patients underwent reconstructive procedures with an inferior genicular artery osteoperiosteal cutaneous flap. One fibula osteoseptocutaneous flap showed total failure and another showed a 25 percent skin loss; both were revised with pedicled flaps. The skin paddle of an inferior genicular artery flap was replaced with an anterolateral thigh flap because of anatomic variation of the skin vessel. Once the diagnosis of osteoradionecrosis is established, replacement of the dead bone and surrounding tissue with a vascularized free bone flap is inevitable, and a composite osteocutaneous free flap is a good option.     

The use of miniplates in craniomaxillofacial surgery

Miniplates were used in craniomaxillofacial surgery for fixation in the skull, maxilla, and/or mandible in 74 patients with minimal or no intermaxillary wiring. Procedures included forehead and orbital repositioning, frontofacial advancement, Le Fort III and particularly Le Fort I osteotomies, as well as mandibular osteotomies and fracture repair. The miniplates provided stable fixation and, compared with other techniques, improved airway safety. The complication rate was low: there were no infections, but two plates (1 percent) became exposed in the buccal sulcus. Although application of miniplates lengthened surgery and increased the cost of the procedure, the savings in intensive care monitoring more than offset these costs. The stability of fixation minimizes the opportunity to reposition the fragments postoperatively with training elastics. Therefore, meticulous technique is mandatory, with particular emphasis on passive fitting of the plates and precise drilling of screw holes.     

The use of Champy miniplates for osteosynthesis in craniofacial deformities and trauma

Champy miniplates have been used in the treatment of craniofacial fractures and in osteotomies for correction of posttraumatic deformities, congenital craniofacial deformities, and secondary bony deformities due to pathologies such as hemangioma and neurofibroma. An additional use has been to stabilize free and vascularized bone grafts. The total number of cases reviewed were 50 (25 acute trauma, 4 vascularized mandible reconstruction, and 21 osteotomies of varied types). There were three infections, two in mandibular fractures that were comminuted and compound into the mouth and one in a compound comminuted fracture of the frontal and maxillary area that was judged to be infected when the plate was placed in position. Two plates have been obvious under the skin. No patient has requested plate removal. The advantages of plating in selected cases are decreased operating time, rigid fixation at surgery, good fixation of bone grafts, and the ability to remove intermaxillary fixation in children at the end of the procedure or within the first few postoperative days.     

Modeling a fibula transplant in mandibular reconstructions: evaluation of the effects of a minimal number of osteotomies on the contour of the jaw.

The fibula osteocutaneous free flap has become the preferred method for most cases of mandibular reconstruction after oncologic surgical ablation. To recreate the parabolic form of the mandible, the fibula has to be divided up into segments using a closed wedge osteotomy technique. The number of osteotomies is preferably kept to a minimum so that segmental periosteal circulation is not compromised and also to keep operating time to a minimum. The limited number of osteotomies creates an angular contour. The aim of this study was to establish the degree to which overcorrection or undercorrection would occur when a subtotal reconstruction from ramus to ramus was simulated using five bony segments and four osteotomies. The study was carried out using 30 preserved jaws; the contour lines of the jaws were transferred onto tracing paper using a cardboard template. The contour of the mandible was divided into five sections (ramus, body, symphysis, body, and ramus). Because of the cutting off of the curvature in the original jaw outline, the lateral side of the body will become narrower and the chin broader. This also results in an underprojection (displacement) of the chin. To follow the original contour of the jaw as accurately as possible, all these anomalies must be minimized. The amount of under- and overprojection is calculated for a displacement of 1.0, 1.5, 2.5, 5.0, 7.5, and 10 mm of the chin. The most accurate reconstruction of the mandibular contour is achieved with a displacement of 1.5 or 2.5 mm. To preserve sufficient periosteal circulation, the minimum width of bone segments must be 15 mm or more. This concerns especially the symphysis section. On the basis of a fibula thickness of 14 mm, the internal bone width of the symphysis section is calculated. With a displacement of 1.5 mm, the average internal width of the bone segment is 14.8 mm, with a range of 9.9 to 23.0 mm (95 percent confidence interval, 12.8 to 16.7 mm). Therefore, a displacement of 2.5 mm with an internal bone width of 16.4 mm is preferred (range, 11.9 to 24.8 mm; 95 percent confidence interval, 15.5 to 18.2 mm). The loss of lateral projection is minimal (5.8 mm) and the resulting chin width is acceptable (average, 35.0 mm). In conclusion, we propose that in a subtotal procedure, an acceptable jaw reconstruction can be achieved with a limited number of osteotomies. The bone length of the symphysis section remains within safe limits. If the defect is of limited dimensions, then the resulting jaw contour is even more accurate.     

Reconstruction of the mandible with osseous free flaps: a 10-year experience with 150 consecutive patients.

Osseous free flaps have become the preferred method for reconstructing segmental mandibular defects. Of 457 head and neck free flaps, 150 osseous mandible reconstructions were performed over a 10-year period. This experience was retrospectively reviewed to establish an approach to osseous free flap mandible reconstruction. There were 94 male and 56 female patients (mean age, 50 years; range 3 to 79 years); 43 percent had hemimandibular defects, and the rest had central, lateral, or a combination defect. Donor sites included the fibula (90 percent), radius (4 percent), scapula (4 percent), and ilium (2 percent). Rigid fixation (up to five osteotomy sites) was used in 98 percent of patients. Aesthetic and functional results were evaluated a minimum of 6 months postoperatively. The free flap success rate was 100 percent, and bony union was achieved in 97 percent of the osteotomy sites. Osseointegrated dental implants were placed in 20 patients. A return to an unrestricted diet was achieved in 45 percent of patients; 45 percent returned to a soft diet, and 5 percent were on a liquid diet. Five percent of patients required enteral feeding to maintain weight. Speech was assessed as normal (36 percent), near normal (27 percent), intelligible (28 percent), or unintelligible (9 percent). Aesthetic outcome was judged as excellent (32 percent), good (27 percent), fair (27 percent), or poor (14 percent). This study demonstrates a very high success rate, with good-to-excellent functional and aesthetic results using osseous free flaps for primary mandible reconstruction. The fibula donor site should be the first choice for most cases, particularly those with anterior or large bony defects requiring multiple osteotomies. Use of alternative donor sites (i.e., radius and scapula) is best reserved for cases with large soft-tissue and minimal bone requirements. The ilium is recommended only when other options are unavailable. Thoughtful flap selection and design should supplant the need for multiple, simultaneous free flaps and vein grafting in most cases.     

The osteocutaneous scapular flap for mandibular and maxillary reconstruction

Microfil injections in 8 cadavers and clinical experience with 26 patients have demonstrated a reliable blood supply to the lateral border of the scapula based on branches of the circumflex scapular artery. This tissue has been used successfully for reconstruction of a variety of defects resulting from maxillectomy and mandibular defects from cancer and benign tumor excisions. Advantages of this tissue over previous reconstructive methods include the ability to design multiple cutaneous panels on a separate vascular pedicle from the bone flap allowing improvement in three-dimensional spatial relationships for complex mandibular and maxillary reconstructions. The lateral border of the scapula provides up to 14 cm of thick, straight corticocancellous bone that can be osteotomized where desired. The thin blade of the scapula provides optimum tissues for palate and orbital floor reconstruction. There have been no flap failures and minimal donor-site complications.     

Evaluation of threshold stress for bone resorption around screws based on in vivo strain measurement of miniplate

The purpose of this study is to investigate the critical threshold stress causing bone resorption evaluated from strain measurement in vivo, comparing the various finite element models. In this study strains of miniplates used for mandibular fractures were measured once a week until the strains reduced. The maximum bite force for each patient was applied in the incisal, right molar and left molar region. The strains increased and reached a peak level at 2-4 weeks, whereas the bite forces increased during the period of measurements. A 3-D osteosynthesis model using finite element method showed that the compressive stresses of the bone surrounding screws ranged within approximately -40 MPa under the condition generating the same amounts of strains measured in the miniplates. Furthermore, various finite element models simulating mandibular reconstruction using the fibular graft were constructed. The models for reconstruction using single strut fibula showed distinct stress concentration in the cortical bone surrounding screws, and the peak stress levels were 2 to 3 times as strong as that of the fracture model. We conclude that critical threshold for bone resorption should be approximately -50 MPa (3600 micro strain).     

Free fibula long bone reconstruction in orthopedic oncology: a surgical algorithm for reconstructive options

The fibula free flap became popular in orthopedic oncology for limb-sparing long bone tumor resection. It is particularly suitable for intercalary or resection arthrodesis options. In the present series, a surgical reconstruction algorithm was used, enabling each patient to receive a personalized technique. During the years 1998 to 2002, 30 patients underwent limb-sparing surgery for long bone sarcoma. There were 18 males and 12 females. Their mean age was 23 years (range, 9 to 70 years). The diagnoses were Ewing's sarcoma (11 patients), osteogenic sarcoma (eight patients), chondrosarcoma (five patients), giant cell tumor of bone (three patients), high-grade soft-tissue sarcoma (two patients), and leiomyosarcoma of bone (one patient). The majority of tumors where located in the lower extremity (23 patients), mostly in the femur (15 patients with four tumors in the proximal femoral shaft, five tumors in the distal femoral shaft, five tumors in the whole femoral shaft, and one tumor in the proximal femoral head). In seven patients, the upper extremity was involved; in six patients, the radius was involved; and in one patient, the humerus was involved. The free fibula flap was used in three types of approaches: vascularized fibula as an osseous flap only (18 patients), a combination of a vascularized fibula flap in conjunction with an allograft (Capanna's technique; 10 patients), and a free double-barreled fibula (two patients). All flaps survived. Postoperatively, all patients were monitored clinically, radiologically, and by radioisotope bone scan studies. Callus formation and union were shown 2.6 to 8 months postoperatively. Patients who underwent lower extremity reconstruction were nonweightbearing for 3 to 9 months, with a transition period in which they used a brace and gradually increased weightbearing until full weightbearing was achieved. Eight patients had 11 recipient-site complications. Two patients (6.7 percent) had hematomas, and three patients (10 percent) had infection and dehiscence of the surgical wound with bone exposure in one patient; all complications resolved with conservative treatment only. Failure of the hardware fixation system occurred in two patients, mandating surgical correction. No fibula donor-site complications were recorded. In intercalary resections, the use of the vascularized fibula flap as an isolated osseous flap might be insufficient. Different body sites have different stress loads to carry, depending on the age of the patient and on his individual physical status. To achieve initial strength in the early period, the authors combined the free fibula flap with an allograft (Capanna's method) or augmented it as a double-barreled fibula. They propose a surgical algorithm to assist the surgeon with the preferred method for reconstruction of various long bone defects in different body locations at childhood or adulthood. Long bone reconstruction using a vascularized fibula flap, alone or in combination with an allograft, autogenous bone graft, or double-barreled fibula for limb-sparing surgery, is a safe and reliable method with a predictable bony union, good functional outcome, and a low complication rate.     

Osteosynthesis and bony healing between two consecutive free fibular bone grafts

This case report describes a recurrent squamous cell carcinoma in the oral cavity requiring two consecutive free fibula transfers at different times. In a unique application of the fibula, rigid miniplate fixation was used between the two independent free flaps to reconstitute the contour of the mandible for an extensive composite oromandibular defect, extending from the left angle to the right ascending ramus. This application underscores the utility of the free osteocutaneous fibular flap for reconstruction of complex mandibular defects.     

Free fibula osteoseptocutaneous-pedicled pectoralis major myocutaneous flap combination in reconstruction of extensive composite mandibular defects

Lateral composite mandibular defects resulting from excision of advanced oral carcinoma often require mandible, intra-oral lining, external face, and soft-tissue bulk reconstruction. Ignorance of importance soft-tissue deficit in those patients may cause significant morbidity and functional loss. Such defects, therefore, can be reconstructed best with a double free flap technique. However, this procedure may not be feasible for every patient or surgeon. An alternative procedure is a free fibula osteoseptocutaneous flap combined with a pedicled pectoralis major myocutaneous flap. This combination was used in reconstruction of extensive composite mandibular defects in 14 patients with T3/T4 oral squamous cell carcinoma. All patients were men, and the average age was 54.3 years. The septocutaneous paddle of the fibula flap was used for the mucosal lining of the defects while the bony part established the rigid mandibular continuity. The pectoralis major flap then covered the external skin defect in the face and cheek, and the dead spaces left by the extirpated masticator muscles, buccal fat, and parotid gland. One free fibula flap failed totally, and one pectoralis major flap developed marginal necrosis. At the time of final evaluation, nine patients (64.3 percent) were alive, surviving an average of 25.7 months. All patients eventually regained their oral continence and an acceptable cosmetic appearance. In conclusion, the fibula osteoseptocutaneous flap plus regional myocutaneous flap choice is a successful and technically less demanding alternative to the double free flap procedures in reconstruction of extensive lateral mandibular defects.     

Adjustable Stiffness,External Fixator for the Rat Femur Osteotomy and Segmental Bone Defect Models

The mechanical environment around the healing of broken bone is very important as it determines the way the fracture will heal. Over the past decade there has been great clinical interest in improving bone healing by altering the mechanical environment through the fixation stability around the lesion. One constraint of preclinical animal research in this area is the lack of experimental control over the local mechanical environment within a large segmental defect as well as osteotomies as they heal. In this paper we report on the design and use of an external fixator to study the healing of large segmental bone defects or osteotomies. This device not only allows for controlled axial stiffness on the bone lesion as it heals, but it also enables the change of stiffness during the healing process in vivo. The conducted experiments have shown that the fixators were able to maintain a 5 mm femoral defect gap in rats in vivo during unrestricted cage activity for at least 8 weeks. Likewise, we observed no distortion or infections, including pin infections during the entire healing period. These results demonstrate that our newly developed external fixator was able to achieve reproducible and standardized stabilization, and the alteration of the mechanical environment of in vivo rat large bone defects and various size osteotomies. This confirms that the external fixation device is well suited for preclinical research investigations using a rat model in the field of bone regeneration and repair.     

Evaluation of Functional and Biomechanical Properties of Bone Regenerates

Functional tests with incrementing axial load on the affected limb were performed in patients with humerus, tibia and fibula fractures, or undergoing tibial bone lengthening using the Ilizarov apparatus (n = 75). It was found that oossification was associated with a decrease in the blood flow velocity in the arteries of the bone regenerate. In the humerus, the exercise tolerance was two to three times lower, while the micromotion rate of bone fragments and the blood flow velocity were higher. The micromotion rate and the blood flow velocity decreased by the end of the fixation period, since they were no longer affected by the incrementing load.     

Treatment of mandible fractures using low-profile titanium miniplates: preliminary study.

This study evaluated the short-term results of patients treated with low-profile titanium miniplates for fractures of the mandible. Thirty-one fractures of the mandible in 23 patients were treated by open reduction and internal fixation using thin, low-profile miniplates and 1.3-mm self-threading screws. Duration of intermaxillary fixation ranged from 0 to 25 days. Patients were evaluated for complications during a follow-up period ranging from 6 to 24 months. Seven patients (30.4 percent) experienced complications. These included infection (n = 1), premature occlusal contact (n = 1), wound dehiscence (n = 1), temporomandibular joint disorder (n = 1), and paresthesia (n = 3). All complications were minor and adequately managed with incision and drainage, medication, and elastic traction. Low-profile titanium miniplates can be adequately used for internal fixation in selective mandibular fractures. Advantages of these types of plates include comfort due to the thinness of miniplates and ease of application.     

Combined anterolateral thigh flap and vascularized fibula osteoseptocutaneous flap in reconstruction of extensive composite mandibular defects.

Extensive composite defects of the oromandibular area are usually created after the surgical treatment of T3 and T4 cancers, requiring complex reconstructive plastic surgical procedures. The preferred treatment method for this type of defect is reconstruction with two free flaps. The use of the vascularized fibula osteoseptocutaneous flap for the bone and inner lining defect is well known and accepted. Among the flaps that can be used for the outer lining and soft-tissue reconstruction, the two most commonly used have been the forearm flap and the rectus abdominis myocutaneous flap. However, these flaps have some disadvantages that restrict their use for this purpose. The forearm flap is usually too thin to cover the fibular bone and reconstruction plate, and the rectus abdominis myocutaneous flap can cause a subclinical reduction in abdominal strength. Both radial forearm and rectus abdominis myocutaneous flaps are difficult to harvest during tumor excision. Because of these drawbacks, over the past several years the authors have preferred to use the anterolateral thigh flap for outer face, neck, and submandibular region reconstructions. From October of 1998 to June of 2000, 22 extensive composite mandibular defect reconstructions using the free anterolateral thigh flap, combined with the vascularized free fibula osteoseptocutaneous flap, were performed at the Chang Gung Memorial Hospital. Complete flap survival was 90.9 percent (40 of 44 flaps). Complete loss was seen in an anterolateral thigh flap, which was then reconstructed with a pectoralis major myocutaneous pedicled flap (2.3 percent). There were five venous problems: three in osteoseptocutaneous free fibula flaps, the other two in anterolateral thigh flaps; all were revised immediately. However, the skin islands of two osteoseptocutaneous free fibula flaps and one anterolateral thigh flap developed partial necrosis (6.8 percent). The other complications were compartment syndrome in the leg in one patient, external carotid artery rupture in one patient, three donor-site infections in two patients, three neck wound infections, and one myocardial insufficiency; all were treated properly. Thirteen patients underwent revision procedures 6 months after the first operation. These procedures included debulking of the flap or revision of the mouth angle or both. Trismus or intraoral contraction was noted in none of these patients. In conclusion, the free anterolateral thigh flap combined with the vascularized fibula osteoseptocutaneous flap seems to be a good choice in the reconstruction of the extensive composite defects of the oromandibular region aesthetically and functionally.     

Maxillofacial reconstruction with prefabricated osseous free flaps: a 3-year experience with 24 patients

Between January of 1998 and May of 2002, 25 prefabricated osseous free flaps (23 fibula and two iliac crest flaps) were transferred in 24 patients to repair maxillary (six flaps) or mandibular (eight flaps) defects after tumor resection, severe maxillary (four flaps) or mandibular (one flap) atrophy (Cawood VI), maxillary (one flap) or mandibular (three flaps) defects after gunshot injury, and maxillary (two flaps) defects after traffic accidents. Prefabrication included insertion of dental implants, positioned with a drilling template in a preplanned position, and split-thickness grafting. Drilling template construction was based on the prosthetic planning. The template determined the position of the implants and the site and angulation of osteotomies, if necessary. The mean delay between prefabrication and flap transfer was 6 weeks (range, 4 to 8 weeks). While the flap was harvested, a bar construction with overdentures was mounted onto the implants. The overdentures were used as an occlusal key for exact three-dimensional positioning of the graft within the defect. The bar construction also helped to stabilize the horseshoe shape of the graft. The follow-up period ranged from 2 months to 4 years (mean, 21 months), during which time two total and three partial flap losses occurred. One total loss was due to thrombosis of the flap veins during the delay period, whereas the other total loss was caused by spasm of the peroneal artery. Two partial losses were due to oversegmentation of the flaps with necrosis of the distal fragment, whereas one partial loss was caused by disruption of the vessel from the distal part. Of the 90 implants that were inserted into the prefabricated flaps during the study period, 10 were lost in conjunction with flap failure; of the remaining 80 implants, four were lost during the observation period, for a success rate of 95 percent. Flap prefabrication based on prosthetic planning offers a powerful tool for various reconstructive problems in the maxillofacial area. Although it involves a two-stage procedure, the time for complete rehabilitation is shorter than with conventional procedures.