Mechanism of generation and regulation of photopotential by bacteriorhodopsin in bimolecular lipid membrane.

Photoelectric properties of bacteriorhodopsin incorporated into a bimolecular lipid membrane were investigated with special regard to the mechanism of photoelectric field generation. It was shown that besides its proton pump and electric generator functions bacteriorhodopsin works as a possible molecular regulator of the light-induced membrane potential. When a bimolecular lipid membrane containing bacteriorhodopsin is continuously illuminated in its main visible absorption band, and afterwards by superimposed blue light matching the absorption band of the long-living photobleached bacteriorhodopsin (M412) as well, the latter either enhances or decreases the steady-state photoresponse, depending upon the intensity of the green light. Thus, the additional blue-light illumination tends to cause the resultant photoelectric membrane potential to become stabilized. Two alternative schemes are tentatively proposed for the photochemical cycle of bacteriorhodopsin whereby blue light can control photovoltage generation. A kinetic model of the proton pump and the regulation of the photoelectric membrane potential is presented. This model fits all the experimental findings, even quantitatively. From the model some kinetic and physical parameters of this light-driven pump could be determined.     

Mechanism of generation and regulation of photopotential by bacteriorhodopsin in bimolecular lipid membrane. The quenching effect of blue light

Photoelectric properties of bacteriorhodopsin incorporated into a bimolecular lipid membrane were investigated with special regard to the mechanism of photoelectric field generation. It was shown that besides its proton pump and electric generator functions bacteriorhodopsin works as a possible molecular regulator of the light-induced membrane potential. When a bimolecular lipid membrane containing bacteriorhodopsin is continuously illuminated in its main visible absorption band, and afterwards by superimposed blue light matching the absorption band of the long-living photobleached bacteriorhodopsin (M₄₁₂) as well, the latter either enhances or decreases the steady-state photoresponse, depending upon the intensity of the green light. Thus, the additional blue-light illumination tends to cause the resultant photoelectric membrane potential to become stabilized. Two alternative schemes are tentatively proposed for the photochemical cycle of bacteriorhodopsin whereby blue light can control photovoltage generation. A kinetic model of the proton pump and the regulation of the photoelectric membrane potential is presented. This model fits all the experimental findings, even quantitatively. From the model some kinetic and physical parameters of this light-driven pump could be determined.     

温度对脂质囊泡中单体菌紫质分子结构和光电响应的影响

本实验用人工双分子平板膜系统(BLM)测量了紫膜碎片和在DMPC脂质襄泡膜中的单体菌紫质分子的光电响应以及与温度的关系(处理温度17℃至31℃).温度对紫膜碎片的光电响应影响不大,但对单体菌紫质分子的光电响应有明显影响.用园二色(CD)方法相应地观察了温度对紫膜碎片和单体菌紫质分子在可见波长范围内的CD谱的影响 同样观察到温度对单体菌紫质分子的CD谱有明显影响.两者的影响很可能与脂质襄泡中DMPC的相变温度有关.     

Photocurrent response of bacteriorhodopsin adsorbed on bimolecular lipid membranes

The photo response of bacteriorhodopsin adsorbed on a bimolecular lipid membrane has been investigated using short-circuit current measurements. The results revealed a biphasic current vs. time curve for the photocurrent at pH values of approx. 7. This phenomenon could be modified by altering either the value of the external applied electrical field or the proton concentration differences.The observed effects of the external applied voltage, pH gradient and lipophilic proton carriers enabled us to conclude that the bacteriorhodopsin can be adsorbed in two different states, which give rise to a pumping effect and a flux of protons in opposite directions.A theoretical analysis of the photocycle in relation to the electrical field which acts on the proton uptake and release is proposed. The main effect of this field is to diminish the pumping rate due to the proton motive force resulting from the creation of space-charge in the vicinity of purple membrane fragments.     

Properties of the electrogenic activity of bacteriorhodopsin

In this study, we analyzed the photoelectric current generated by bacteriorhodopsin adsorbed on a polymer film, “Lumirror” (Muneyuki et al. in FEBS Lett 427:109–114, 1998). We could examine the photoelectric current over a wide range of light intensity and pH values using the same membrane owing to the mechanical and chemical stability of the thin polymer film. We analyzed the photoelectric current by comparison with a simple equivalent electric circuit. Analysis of experimental results obtained at different light intensities suggested that the electromotive force of the bacteriorhodopsin was independent of light intensity. The pH dependence of the photoelectric current suggested that the bacteriorhodopsin could generate a maximum electromotive force at approximately pH 6.     

Structural determinants of purple membrane assembly

The purple membrane is a two-dimensional crystalline lattice formed by bacteriorhodopsin and lipid molecules in the cytoplasmic membrane of Halobacterium salinarum. High-resolution structural studies, in conjunction with detailed knowledge of the lipid composition, make the purple membrane one of the best models for elucidating the forces that are responsible for the assembly and stability of integral membrane protein complexes. In this review, recent mutational efforts to identify the structural features of bacteriorhodopsin that determine its assembly in the purple membrane are discussed in the context of structural, calorimetric and reconstitution studies. Quantitative evidence is presented that interactions between transmembrane helices of neighboring bacteriorhodopsin molecules contribute to purple membrane assembly. However, other specific interactions, particularly between bacteriorhodopsin and lipid molecules, may provide the major driving force for assembly. Elucidating the molecular basis of protein-protein and protein-lipid interactions in the purple membrane may provide insights into the formation of integral membrane protein complexes in other systems.     

Studies on a reconstituted acetylcholine receptor system: effect of agonists

An impure preparation of acetylcholinesterase from electroplax of the electric eel can be incorporated into a bimolecular lipid membrane. The acetylcholinesterase-modified bimolecular lipid membrane shows a concentration-dependent increase in membrane conductance elicited by several agonists (acetylcholine, carbamylcholine, phenyltrimethylammonium ion, tetraethylammonium ion, decamethonium ion, and nicotine) added to the compartment opposite that to which acetylcholinesterase was originally added. Affinity and efficacy of the various agonists in generating the conductance increase were measured from dose-response curves; these are in good quantitative agreement with corresponding values observed for depolarization of intact eel electroplax. The ion conduction pathways induced by agonists in the modified bimolecular lipid membrane show a slight cation selectivity, Na ? K > Cl (3:3:1), similar to that observed for the depolarized electroplax membrane. Evidence is presented that suggests that some components other than acetylcholinesterase induce the acetylcholine receptor response in the bimolecular lipid membrane.     

Coreconstitution of bacterial ATP synthase with monomeric bacteriorhodopsin into liposomes. A comparison between the efficiency of monomeric bacteriorhodopsin and purple membrane patches in coreconstitution experiments

The conditions for coreconstitution of a bacterial ATP synthase and bacteriorhodopsin into lecithin liposomes and for light driven ATP synthesis have been optimized. A rate of maximally 280 nmol ATP min-1 mg ATP synthase-1 was achieved with monomerized bacteriorhodopsin compared with a rate of up to 45 nmol ATP min-1 mg-1 found for proteoliposomes containing bacteriorhodopsin in the form of purple membrane patches. The different rates are explained by the finding that monomeric bacteriorhodopsin is more homogeneously distributed among the liposomes than the purple membrane patches. The final activities depended on both the purification method for the two proteins and the coreconstitution procedure. Furthermore, the ratio (lipid to bacteriorhodopsin to ATP synthase) could be optimized. Light-driven ATP synthesis depends also on the type of detergent used. The best result was obtained by deoxycholate. Also the relationship between proton translocation (by bacteriorhodopsin) and ATP synthesis activity was measured. A constant H+/ATP ratio was found at higher light intensities. This ratio increased strongly at lower light intensities.     

A gentle method for the lysis of oral streptococci.

Black lipid planar membranes were prepared by incorporating polymers such as polystyrene in a membrane forming solution. The polymerincorporated planar membranes showed greater stability to applied electric fields and have longer lifertimes. Photopotentials were studied under several conditions; with bacteriorhodopsin in the planar membrane; with bacteriorhodopsin in liposomes; with bacteriorhodopsin fragments in suspension; and with bacteriorhodopsin both in the planar membrane and in liposomes. Skulachev's laboratory has reported that bacteriorhodopsin-liposomes develop potentials across a black lipid planar membrane. In our studies, because the polymer incorporated planar membranes are very stable, it was possible to obtain somewhat larger photopotentials in the presence of bacteriorhodopsin ranging between 30–500 mV. The enhancement of bacteriorhodopsin catalyzed photopotentials, found in the presence of Ca⁺⁺ (or other bivalent cations) and/or applied electric fields, appeared to result from an orientation effect of bacteriorhodopsin at the membrane interface.     

Bacteriorhodopsin-mediated photoelectric responses in lipid/water systems

Summary Bacteriorhodopsin-mediated photopotential generation has been studied in two kinds of lipid/water systems: (1) decane solution of asolectin was used as the lipid phase; (2) a mixture of bacteriorhodopsin sheets and hexane solution of phosphatidyl choline was applied onto a water surface to form a monolayer, and then the monolayer was covered with a 0.3-mm decane layer. In both cases, illumination was found to induce formation of an electric potential difference, with the bulk water phase being found negative when measured with a vibrating electrode. In the latter, but not in the former, system small amounts of a protonophorous uncoupler were found to stimulate the photoresponse. Large amounts of the uncoupler proved depressing in both systems. Phenyldicarbaundecaborane anion (PCB^–) was shown to substitute for the uncoupler, being much more potent both as an activator and as an inhibitor of the photoresponse. In both studied systems, gramicidin A inhibits the photoresponse, the effect being greatly potentiated by K⁺, Na⁺ or H⁺ ions.In the system decane solution of asolectin/water, an Ag/AgCl electrode immersed into the lipid phase can be used instead of a vibrating electrode. All the measured features of the photoelectric responses observed with any of these electrodes were found to be quite similar to those inherent in a phospholipid-impregnated collodion film adsorbing bacteriorhodopsin sheets on one of its surfaces.A scheme is discussed built on the assumption that photopotentials in all the studied systems are due to an uphill light-dependent transport of H⁺ ions from the bulk water phase to a water cavity localized between a bacteriorhodopsin sheet and the surface of the bulk lipid phase. Thus, the above lipid/water systems containing bacteriorhodopsin are composed of four, rather than two, phases, as was supposed previously.Bacteriorhodopsin-mediated photopotential generation has been studied also in the decane/water system without phospholipids. This system with bacteriorhodopsin sheets added to the water phase demonstrates a light-dependent photoelectric response reaching 1.5 V, which can be measured only by a vibrating electrode. The photoresponse starts after a lag period of several seconds. Switching off the light results in the reversal of the light-induced electric potential change. The off-effect also has a lag period. The action spectrum of the photoresponse shows at least two maxima: a smaller at 560 nm and a larger at <420 nm. Free retinal can substitute for bacteriorhodopsin in the studied system. All the above effects disappear if, instead of air, argon is used. In the system decane solution of asolectin/water, a slow photoelectric response of this type can be demonstrated at neutral pH in the presence of gramicidin and at pH 4 without gramicidin. A suggestion is put forward that the slow photoelectric response is due to an interface Volta-potential change induced by a product of photooxidation of bacteriorhodopsin and/or free retinal released from bacteriorhodopsin.     

Purple membrane lipid control of bacteriorhodopsin conformational flexibility and photocycle activity.

Specific lipids of the purple membrane of Halobacteria are required for normal bacteriorhodopsin structure, function, and photocycle kinetics [Hendler, R.W. & Dracheva, S. (2001) Biochemistry (Moscow)66, 1623-1627]. The decay of the M-fast intermediate through a path including the O intermediate requires the presence of a hydrophobic environment near four charged aspartic acid residues within the cytoplasmic loop region of the protein (R. W. Hendler & S. Bose, unpublished results). On the basis of the unique ability of squalene, the most hydrophobic purple membrane lipid, to induce recovery of M-fast activity in Triton-treated purple membrane, we proposed that this uncharged lipid modulates an electrostatic repulsion between the membrane surface of the inner trimer space and the nearby charged aspartic acids of the cytoplasmic loop region to promote transmembrane alpha-helical mobility with a concomitant increase in the speed of the photocycle. We examined Triton-treated purple membranes in various stages of reconstitution with native lipid suspensions using infrared spectroscopic techniques. We demonstrate a correlation between the vibrational half-width parameter of the protein alpha-helical amide I mode at 1660 cm-1, reflecting the motional characteristics of the transmembrane helices, and the lipid-induced recovery of native bacteriorhodopsin properties in terms of the visible absorbance maxima of ground state bacteriorhodopsin and the mean decay times of the photocycle M-state intermediates.     

Structure of planar membrane formed from liposomes

Lipid vesicles with incorporated ion channels from polyene antibiotic amphotericin B were used to investigate structures of planar membranes formed by Shindler's techniques. A planar membrane assembled on the aperture in a lavsan film from two layers generated at the air-aqueous liposome suspension interface is not a simple bilayer but a bimolecular membrane containing numerous partly fused liposomes. A complete fusion of liposomal membranes with the planar bilayer is an unlikely event during membrane formation. A planar bimolecular lipid membrane without incorporated liposomes can be made by a method consisting of three stages: formation of a lipid layer on the air-water interface of a suspension containing liposomes, transfer of this layer along the surface of the solution into a chamber containing a solution without liposomes where a lipid monomolecular layer forms gradually (within about 20 min) at the air-water interface, assembling of the planar bilayer membrane from this monolayer. The knowledge of the planar membrane structure may be useful in experiments on incorporation of membrane proteins into a planar lipid bilayer.     

Reconstitution of Biological Molecular generators of electric current. Bacteriorhodopsin.

1. Photoinduced generation of electric current by bacteriorhodopsin, incorporated into the planar phospholipid membrane, has been directly measured with conventional electrometer techniques. 2. Two methods for bacteriorhodopsin incorporation have been developed: (a) formation of planar membrane from a mixture of decane solution of phospholipids and of the fraction of violet fragments of the Halobacterium halobium membrane (bacteriorhodopsin sheets), and (b) adhesion of bacteriorhodopsin-containing reconstituted spherical membranes (proteoliposomes) to the planar membrane in the presence of Ca2+ or some other cations. In both cases, illumination was found to induce electric current generation directed across the planar membrane, an effect which was measured by macroelectrodes immersed into electrolyte solutions on both sides of the membrane. 3. The maximal values of the transmembrane electric potential were of about 150 mV at a current of about 10(-11) A. The electromotive force measured by means of counterbalancing the photoeffect by an external battery, was found to reach the value of 300 mV. 4. The action spectrum of the photoeffect coincides with the bacteriorhodopsin absorption spectrum (maximum about 570 nm). 5. Both components of the electrochemical potential of H+ ions (electric potential and delta pH) across the planar membrane affect the bacteriorhodopsin photoelectric response in a fashion which could be expected if bacteriorhodopsin were a light-dependent electrogenic proton pump. 6. La3+ ions were shown to inhibit operation of those bacteriorhodopsin which pump out H+ ions from the La3+-containing compartment. 7. The photoeffect, mediated by proteoliposomes associated with thick planar membrane, is decreased by gramicidin A at concentrations which do not influence the planar membrane resistance in the light. On the contrary, a protonophorous uncoupler, trichlorocarbonylcyanidephenylhydrazone, decreases the photoeffect only if it is added at a concentration lowering the light resistance. The dark resistance is shown to be higher than the light one, and decreases to the light level by gramicidin. 8. A simple equivalent electric scheme consistent with the above results has been proposed.     

Circular dichroism study of bacteriorhodopsin-lipid interaction

Delipidated bacteriorhodopsin purified from purple membrane of H. halobium was reconstituted with the circular dichroism active phospholipid. The observed circular dichroism spectra in the 450-700 nm region characteristic of bacteriorhodopsin showed the temperature dependence characterized by a midpoint at ca. 45 degrees C and this spectral change showed the disaggregation of bacteriorhodopsin trimer to monomer. The circular dichroism spectra in the 250-400 nm region characteristic of the azo chromophore of phospholipid exhibited a remarkable temperature dependence synchronized with the disaggregation of bacteriorhodopsin, suggesting that a large proportion of the phospholipid is present as boundary lipid.     

Introduction of a method for three-dimensional mapping of the charge motion in bacteriorhodopsin

Electric signals associated with the photocycle of bacteriorhodopsin carry valuable information about the proton transport process. Photocurrents measured by different experimental methods are interpreted in terms of intramolecular charge displacements. Permanent electrical asymmetry of the sample is considered to be a prerequisite for the detection of electric signals. The various photoelectric measuring techniques can be distinguished by the way of achievement of this asymmetry. A common feature of the available methods, however, is that the samples are cylindrically symmetric. Consequently, intramembraneous charge displacements can normally be monitored only along the axis of the membrane normal. We developed a novel method that allows also the detection of the in-plane components of the charge displacements. Samples containing oriented purple membrane fragments were used in the experiments, and the rotational symmetry was transiently broken via anisotropic excitation of the bR molecules by linearly polarized light. Kinetics of the normal and in-plane components were measured and interpreted as a result of spatial charge displacements associated with the proton transport process in bacteriorhodopsin.     

Charge transport by ion translocating membrane proteins on solid supported membranes.

A new method for the investigation of ion translocating membrane proteins is presented. Protein containing membrane fragments or vesicles are adsorbed to a solid supported membrane. The solid supported membrane consists of a lipid monolayer on a gold evaporated or gold sputtered glass substrate which is coated with a long chained mercaptan (CH3(CH2)mSH, m = 15, 17). Specific conductance and specific capacitance of the solid supported membrane are comparable to those of a black lipid membrane. However, the solid supported membrane has the advantage of a much higher mechanical stability. The electrical activity of bacteriorhodopsin, Na,K-ATPase, H,K-ATPase, and Ca-ATPase on the solid supported membrane is measured and compared to signals obtained on a conventionally prepared black lipid membrane. It is shown that both methods yield similar results. The solid supported membrane therefore represents an alternative method for the investigation of electrical properties of ion translocating transmembrane proteins.     

Refolding of bacteriorhodopsin in lipid bilayers. A thermodynamically controlled two-stage process

Possible steps in the folding of bacteriorhodopsin are revealed by studying the refolding and interaction of two fragments of the molecule reconstituted in lipid vesicles. (1) Two denatured bacteriorhodopsin fragments have been purified starting from chymotryptically cleaved bacteriorhodopsin. Cleaved bacteriorhodopsin has been renatured from a mixture of the fragments in Halobacterium lipids/retinal/dodecyl sulfate solution following removal of dodecyl sulfate by precipitation with potassium. The renatured molecules have the same absorption spectrum and extinction coefficient as native cleaved bacteriorhodopsin. They are integrated into small lipid vesicles as a mixture of monomers and aggregates. Extended lattices form during the partial dehydration process used to orient samples for X-ray and neutron crystallography. (2) Correct refolding of cleaved bacterioopsin occurs upon renaturation in the absence of retinal. Regeneration of the chromophore and reformation of the purple membrane lattice are observed following subsequent addition of all-trans retinal. (3) The two chymotryptic fragments have been reinserted separately into lipid vesicles and refolded in the absence of retinal. Circular dichroism spectra of the polypeptide backbone transitions indicate that they have regained a highly alpha-helical structure. The kinetics of chromophore regeneration following reassociation have been studied by absorption spectroscopy. Upon vesicle fusion, the refolded fragments first reassociate, then bind retinal and finally regenerate cleaved bacteriorhodopsin. The complex formed in the absence of retinal is kinetically indistinguishable from cleaved bacterioopsin. The refolded fragments in lipid vesicles are stable for months, both as separate entities and after reassociation. These observations provide further evidence that the native folded structure of bacteriorhodopsin lies at a free energy minimum. They are interpreted in terms of a two-stage folding mechanism for membrane proteins in which stable transmembrane helices are first formed. They subsequently pack without major rearrangement to produce the tertiary structure.     

The preparation of lipid-depleted bacteriorhodopsin

Bacteriorhodopsin, the protein of the purple membrane of Halobacterium halobium, was freed to the extent of 90–95% from the natural membrane lipids without loss of function. The residual lipid corresponded to less than 1 mol/mol of bacteriorhodopsin. Delipidation was achieved by treatment of the purple membrane with a mixture of the detergent dimethyldodecylamine oxide and sodium chloride. The detergent was removed by dialysis or by sucrose density gradient centrifugation. Analysis of the lipids removed and those still bound to bacteriorhodopsin was facilitated by the use of purple membrane preparations labelled with ³⁵S, ³²P, or ¹⁴C. The composition of the residual lipids associated with bacteriorhodopsin was similar to that of the total lipid in the purple membrane.     

Thermodynamic properties of purple membrane

We measured the density, expansivity, specific heat at constant pressure, and sound velocity of suspensions of purple membrane from Halobacterium halobium and their constituent buffers. From these quantities we calculated the apparent values for the density, expansivity, adiabatic compressibility, isothermal compressibility, specific heat at constant pressure, and specific heat at constant volume for the purple membrane. These results are discussed with respect to previously reported measurements on globular proteins and lipids. Our data suggest a simple additive model in which the protein and lipid molecules expand and compress independently of each other. However, this simple model seems to fail to describe the specific heat data. Our compressibility data suggest that bacteriorhodopsin in native purple membrane binds less water than many globular proteins in neutral aqueous solution, a finding consistent with the lipid surround of bacteriorhodopsin in purple membrane.     

Spontaneous transmembrane insertion of membrane proteins into lipid vesicles facilitated by short-chain lecithins

Functional reconstitution of the membrane protein bacteriorhodopsin into lipid vesicles is achieved by mixing aqueous suspensions of long-chain lecithins and purple membrane with the short-chain lecithin diheptanoylphosphatidylcholine (20 mol % of total lipid). The membrane protein is transmembranously inserted in the lipid bilayer of the vesicle and highly active as a light-energized proton pump. This rapid, easy, and gentle procedure might allow functional reconstitution of other membrane systems and isolated membrane proteins as well.