Disposable polydimethylsiloxane/silicon hybrid chips for protein detection

This paper presents disposable protein analysis chips with single- or four-chamber-constructed from poly(dimethylsiloxane) (PDMS) and silicon. The chips are composed of a multilayer stack of PDMS layers that sandwich a silicon microchip. This inner silicon chip features an etched array of micro-cavities hosting polymeric beads. The sample is introduced into the fluid network through the top PDMS layer, where it is directed to the bead chamber. After reaction of the analyte with the probe beads, the signal generated on the beads is captured with a CCD camera, digitally processed, and analyzed. An established bead-based fluorescent assay for C-reactive protein (CRP) was used here to characterize these hybrid chips. The detection limit of the single-chamber protein chip was found to be 1 ng/ml. Additionally, using a back pressure compensation method, the signals from each chamber of the four-chamber chip were found to fall within 10% of each other.     

Porous silicon biosensor for detection of viruses

There is a growing need for virus sensors with improved sensitivity and dynamic range, for applications including disease diagnosis, pharmaceutical research, agriculture and homeland security. We report here a new method for improving the sensitivity for detection of the bacteriophage virus MS2 using thin films of nanoporous silicon. Porous silicon is an easily fabricated material that has extremely high surface area to volume ratio, making it an ideal platform for surface based sensors. We have developed and evaluated two different methods for covalent bioconjugation of antibodies inside of porous silicon films, and we show that the pore penetration and binding efficiency depend on the wettability of the porous surface. The resulting films were used to selectively capture dye-labeled MS2 viruses from solution, and a viral concentration as low as 2 x 10(7) plaque-forming units per mL (pfu/mL) was detectable by measuring the fluorescence from the exposed porous silicon film. The system exhibits sensitivity and dynamic range similar to the Luminex liquid array-based assay while outperforming protein micro-array methods.     

Novel developments for improved detection of specific mRNAs by DNA chips

Microarrays have revolutionized gene expression analysis as they allow for highly parallel monitoring of mRNA levels of thousands of genes in a single experiment. Since their introduction some 15 years ago, substantial progress has been achieved with regard to, e.g., faster or more sensitive analyses. In this review, interesting new approaches for a more sensitive detection of specific mRNAs will be highlighted. Particularly, the potential of electrical DNA chip formats that allow for faster mRNA analyses will be discussed.     

Multiplexed protein detection by proximity ligation for cancer biomarker validation

We present a proximity ligation-based multiplexed protein detection procedure in which several selected proteins can be detected via unique nucleic-acid identifiers and subsequently quantified by real-time PCR. The assay requires a 1-microl sample, has low-femtomolar sensitivity as well as five-log linear range and allows for modular multiplexing without cross-reactivity. The procedure can use a single polyclonal antibody batch for each target protein, simplifying affinity-reagent creation for new biomarker candidates.     

铜绿假单胞菌的MALDI-TOF-MS检测方法的建立

目的 建立利用基质辅助激光解吸电离飞行时间质谱仪( MALDI-TOF-MS)对铜绿假单胞菌的快速检测方法.方法 通过MALDI-TOF-MS法对铜绿假单胞菌进行检测分析,并与生化鉴定方法相比较.结果 MALDI-TOF-MS对铜绿假单胞菌的检测后得到肽指纹图片及相关质谱数据,建立MALDI-TOF-MS对铜绿假单胞菌的快速检测方法.结论 MALDI-TOF-MS方法检测铜绿假单胞菌准确快速、操作简单等特点,可发展成为食品检验铜绿假单胞菌的重要(辅助)工具.     

Porous silicon-based biosensor for pathogen detection

A porous silicon-based biosensor for rapid detection of bacteria was fabricated. Silicon (0.01 ohmcm, p-type) was anodized electrochemically in an electrochemical Teflon cell containing ethanoic hydrofluoric acid solution to produce sponge-like porous layer of silicon. Anodizing conditions of 5 mA/cm2 for 85 min proved best for biosensor fabrication. A single-tube chemiluminescence-based assay, previously developed, was adapted to the biosensor for detection of Escherichia coli. Porous silicon chips were functionalized with a dioxetane-Polymyxin B (cell wall permeabilizer) mixture by diffusion and adsorption on to the porous surface. The reaction of beta-galactosidase enzyme from E. coli with the dioxetane substrate generated light at 530 nm. Light emission for the porous silicon biosensor chip with E. coli was significantly greater than that of the control and planar silicon chip with E. coli (P<0.01). Sensitivity of the porous silicon biosensor was determined to be 101-102 colony forming units (CFU) of E. coli. The porous silicon-based biosensor was fabricated and functionalized to successfully detect E. coli and has potential applications in food and environmental testing.     

High throughput proteome screening for biomarker detection

Mass spectrometry-based quantitative proteomics has become an important component of biological and clinical research. Current methods, while highly developed and powerful, are falling short of their goal of routinely analyzing whole proteomes mainly because the wealth of proteomic information accumulated from prior studies is not used for the planning or interpretation of present experiments. The consequence of this situation is that in every proteomic experiment the proteome is rediscovered. In this report we describe an approach for quantitative proteomics that builds on the extensive prior knowledge of proteomes and a platform for the implementation of the method. The method is based on the selection and chemical synthesis of isotopically labeled reference peptides that uniquely identify a particular protein and the addition of a panel of such peptides to the sample mixture consisting of tryptic peptides from the proteome in question. The platform consists of a peptide separation module for the generation of ordered peptide arrays from the combined peptide sample on the sample plate of a MALDI mass spectrometer, a high throughput MALDI-TOF/TOF mass spectrometer, and a suite of software tools for the selective analysis of the targeted peptides and the interpretation of the results. Applying the method to the analysis of the human blood serum proteome we demonstrate the feasibility of using mass spectrometry-based proteomics as a high throughput screening technology for the detection and quantification of targeted proteins in a complex system.     

Nanostructured optical microchips for cancer biomarker detection

Herein we report the label-free detection of a cancer biomarker using newly developed arrayed nanostructured Fabry-Perot interferometer (FPI) microchips. Specifically, the prostate cancer biomarker free prostate-specific antigen (f-PSA) has been detected with a mouse anti-human PSA monoclonal antibody (mAb) as the receptor. Experiments found that the limit-of-detection of current nanostructured FPI microchip for f-PSA is about 10pg/mL and the upper detection range for f-PSA can be dynamically changed by varying the amount of the PSA mAb immobilized on the sensing surface. The control experiments have also demonstrated that the immunoassay protocol used in the experiments shows excellent specificity and selectivity, suggesting the great potential to detect the cancer biomarkers at trace levels in complex biofluids. In addition, given its nature of low cost, simple-to-operation and batch fabrication capability, the arrayed nanostructured FPI microchip-based platform could provide an ideal technical tool for point-of-care diagnostics application and anticancer drug screen and discovery.     

Porous silicon based potentiometric triglyceride biosensor

A novel method for estimating triglycerides is reported. Porous silicon, prepared from p-type (100) crystalline silicon was thermally oxidized and used to immobilise lipase, an enzyme, which hydrolyses triglycerides resulting in the formation of fatty acids. This causes a change in the pH of the solution. Enzyme solution-oxidized porous silicon-crystalline silicon structure was used to detect changes in pH during the hydrolysis of tributyrin as a shift in the capacitance-voltage (C-V) characteristics. Detailed calibration of the sensor is included.     

Life cycle assessment of silicon wafer processing for microelectronic chips and solar cells

Purpose  

The life cycle assessment of silicon wafer processing for microelectronic chips and solar cells aims to provide current and comprehensive data. In view of the very fast market developments, for solar cell fabrication the influence of technology and capacity variations on the overall environmental impact was also investigated and the data were compared with the widely used ecoinvent data.     

Amperometric micro-immunosensor for the detection of tumor biomarker

In this paper, a highly sensitive, reagentless, electrochemical strategy is reported for the detection of a cancer biomarker-Vascular Endothelial Growth Factor (VEGF). Disc shaped carbon fiber microelectrodes were used as the immunosensor platform. Ferrocene monocarboxylic acid labeled anti-VEGF was covalently immobilized on the microelectrode surface using a Jeffamine cross-linker. The formation of immunocomplexes leads to a decrease in the electrochemical signal of ferrocene monocarboxylic acid owing to increased spatial blocking of microelectrode surface. These signal changes enable quantitative detection of VEGF in solution. Voltammetric measurements were conducted to evaluate the interfacial immunoreactions and to quantitatively detect VEGF biomarker. The proposed immunosensing strategy allows a rapid and sensitive means of VEGF analysis with a limit of detection of about 38 pg/mL. This opens up the possibility of employing these electrodes for various single cell analysis and clinical applications. Further, experimental conditions such as concentration of the immobilized antibodies and incubation period were optimized. Following this, the stability and specificity of the immunosensors were also evaluated.     

Porous silicon: an effective nucleation-inducing material for protein crystallization

Protein crystals play a pivotal part in structural genomics, hence there is an urgent requirement for new and improved methodology to aid crystal growth. Considerable effort has been invested in the search of substances (nucleants) that will induce efficient nucleation of protein crystals in a controlled manner. To date, nucleation has been facilitated mainly by seeding, epitaxy, charged surfaces or mechanical means. A different approach is introduced here, involving the use of a mesoporous material that is likely to constrain protein molecules and thereby encourage them to aggregate in crystalline order. Large single crystals were obtained using porous silicon at conditions that are not sufficient for spontaneous nucleation, for five out of six proteins that were investigated. We propose that this success is due to the size distribution of pores in the specially designed porous silicon.     

Electric chips for rapid detection and quantification of nucleic acids

A silicon chip-based electric detector coupled to bead-based sandwich hybridization (BBSH) is presented as an approach to perform rapid analysis of specific nucleic acids. A microfluidic platform incorporating paramagnetic beads with immobilized capture probes is used for the bio-recognition steps. The protocol involves simultaneous sandwich hybridization of a single-stranded nucleic acid target with the capture probe on the beads and with a detection probe in the reaction solution, followed by enzyme labeling of the detection probe, enzymatic reaction, and finally, potentiometric measurement of the enzyme product at the chip surface. Anti-DIG-alkaline phosphatase conjugate was used for the enzyme labeling of the DIG-labeled detection probe. p-Aminophenol phosphate (pAPP) was used as a substrate. The enzyme reaction product, p-aminophenol (pAP), is oxidized at the anode of the chip to quinoneimine that is reduced back to pAP at the cathode. The cycling oxidation and reduction of these compounds result in a current producing a characteristic signal that can be related to the concentration of the analyte. The performance of the different steps in the assay was characterized using in vitro synthesized RNA oligonucleotides and then the instrument was used for analysis of 16S rRNA in Escherichia coli extract. The assay time depends on the sensitivity required. Artificial RNA target and 16S rRNA, in amounts ranging from 10(11) to 10(10) molecules, were assayed within 25 min and 4 h, respectively.     

基因芯片在食品检测中的应用

基因芯片技术是近十几年来生命科学领域的一大发展,其应用越来越广泛。就该技术在转基因食品、食品中的微生物、食品原料、食品中营养成分检测中的应用做一全面的回顾,因其快速、准确、高通量的特点,今后必将成为食品检测的主要方法,促进食品检测的发展,提高食品的安全性,保证人类的健康。     

Electrical protein array chips for the detection of staphylococcal virulence factors

A new approach for the detection of virulence factors of Staphylococcus aureus and Staphylococcus epidermidis using an electrical protein array chip technology is presented. The procedure is based on an enzyme-linked sandwich immunoassay, which includes recognition and binding of virulence factors by specific capture and detection antibodies. Detection of antibody-bound virulence factors is achieved by measuring the electrical current generated by redox recycling of an enzymatically released substance. The current (measured in nanoampere) corresponds to the amount of the target molecule in the analyzed sample. The electrical protein chip allows for a fast detection of Staphylococcus enterotoxin B (SEB) of S. aureus and immunodominant antigen A homologue (IsaA homologue) of S. epidermidis in different liquid matrices. The S. aureus SEB virulence factor could be detected in minimal medium, milk, and urine in a concentration of 1 ng/ml within less than 23 min. Furthermore, a simultaneous detection of SEB of S. aureus and IsaA homologue of S. epidermidis in a single assay could be demonstrated.     

Automatic bio-sampling chips integrated with micro-pumps and micro-valves for disease detection

The present study reports a microfluidic system using the concept of membrane-movement to design and fabricate micro-pneumatic valves and pumps to form a bio-sensing diagnostic chip. The automatic bio-sampling system includes a micro-diagnostic chip fabricated by using MEMS (micro-electro-mechanical systems) technology and an automatic platform comprising of a control circuit, a compressed air source and several electromagnetic valve switches. The control circuit is used to regulate the electromagnetic valve switches, causing thin PDMS membranes to deflect pneumatically by the compressed air and generate valving and pumping effects. The micro-diagnostic chip allows for the quick detection of diseases. Compared to large-scale systems, the new microfluidic system uses smaller amounts of samples and reagents and performs fast diagnosis in an automated format. Instead of using traditional pneumatic micro-pumps, the current study adopts a new design called "spider-web" micro-pumps to increase the pumping rate, and more importantly, improve the uniformity of flow rates inside multiple micro-channels. Experimental data show that for disease diagnosis, the bio-sensing chips integrated with the micro-pneumatic valves and the peristaltic micro-pumps could successfully perform diagnosis tests. Small amounts of samples and reagents could be injected into the diagnosis chips using the micro-pumps and the micro-pneumatic valves could effectively control the movement of the samples and reagents. In order to demonstrate the functionality of the developed device, detection of hepatitis C virus (HCV) and syphilis has been performed using the bio-sampling chips. Experimental data show that fluorescence signals from the microfluidic system were comparable to the ones using conventional testing methods. The developed chip could be easily extended for multiple disease detection. The automatic bio-sensing chips could provide a useful tool for fast disease detection and be crucial for a micro-total-analysis system.     

Protein chips for detection of mite allergens using Kunitz-type protease inhibitors

Stored-food and house-dust arthropods include many species of mites and beetles that affect human health. For diagnostic tests proteases such as trypsin are utilized as they are indicators of the presence of allergen contaminants in food. We recently characterized Kunitz-type protease inhibitors (KPIs) from Solanum palustre. Here we studied biotechnological applications of KPI-B1 and -B4. We manufactured a protein chip with immobilized KPI-B1 and -B4 and showed trypsin/chymotrypsin-binding specificity, indicating that the recombinant proteins have protease selectivity. We employed the protein chip to capture mite proteins belonging to the protease family with polyclonal anti-mite antibodies. The mite diagnostic chip can be useful for detecting mite allergens.     

Coomassie blue is sufficient for specific protein detection of aptamer-conjugated chips

An aptamer-based biochip for protein detection and quantitation which combines the recent biochip technology and the conventional staining methods, is described. Using a model system comprising His-tagged proteins as the analyte and single-stranded RNA aptamers specific for His-tagged proteins as immobilized ligands on chips, we could demonstrate that aptamers were equivalent or superior to antibodies in terms of specificity and sensitivity, respectively. The sensor has the characteristics of good stability, reproducibility and reusability, with detection limit as low as 85 ng/mL His-tagged protein. It has been demonstrated that the sensor can be stored for at least 4 weeks and reused with reasonable reduction rate of staining intensity. In conclusion, we could show the suitability of nucleic acid aptamers as low molecular weight receptors on biochips for sensitive and specific protein detection and quantitation.     

Optimizing thiophosphorylation in the presence of competing phosphorylation with MALDI-TOF-MS detection

Thiophosphorylation provides a metabolically stable, chemically reactive phosphorylation analogue for analyzing the phosphoproteome in vitro and in vivo. We developed a MALDI-TOF-MS based assay for optimizing thiophosphopeptide production by a kinase even in the presence of Mg(2+) and ATP. We found that Abl kinase thiophosphorylation rates can be "rescued" using Mn(2+) in the presence of Mg(2+). Under our ideal conditions, titration of Mn(2+) and ATPgammaS in the presence of Mg(2+) allowed relatively rapid, highly specific thiophosphorylation by Abl tyrosine kinase, both as purified enzyme and in complex cell extracts.