P1 plasmid replication. Role of initiator titration in copy number control

The copy number control locus incA of unit copy plasmid P1 maps in a region containing nine 19 base-pair repeats. Previous results from studies in vivo and in vitro indicated that incA interacts with the plasmid-encoded RepA protein, which is essential for replication. It has been proposed that the repeat sequences negatively control copy number by sequestering the RepA protein, which is rate-limiting for replication. Our results lend further support to this hypothesis. Here we show that the repeats can be deleted completely from P1 miniplasmids and the deletion results in an approximately eightfold increase in plasmid copy number. So, incA sequences are totally dispensable for replication and have only a regulatory role. The copy number of incA-deleted plasmids can be reduced if incA sequences are present in trans or are reincorporated at two different positions in the plasmid. This reduction in copy number is not due to lowered expression of the repA gene in the presence of incA. We show that one repeat sequence is sufficient to bind RepA and can reduce the copy number of incA-deleted plasmids. When part of the repeat was deleted, it lost its ability to bind as well as influence copy number. These results show a strong correlation between the capacity of incA repeats to bind RepA protein both in vivo and in vitro, and the function of incA in the control of copy number.     

Control of P1 plasmid replication by iterons

The incA locus of plasmid P1 controls plasmid copy number by inhibiting the replication origin, oriR . Both loci contain repeat sequences (iterons) that bind the P1 RepA protein. Regulation appears to occur by contact of incA and oriR loci of daughter plasmids mediated by RepA-bound iterons. Synthetic incA iteron arrays were constructed with altered numbers, sequences or spacing of iterons. Using these in in vitro and in vivo assays, we examined two models: (i) that the origin and incA loci form a stable 1:1 complex in which multiple iterons of each locus are paired with those of the other, and (ii) that individual incA iterons act as freely diffusing nucleoprotein units that contact origin iterons in a random and dynamic fashion. The data presented here strongly favour the latter case. The origin, with its five iterons, acts as a target but not as an effector of regulation. We present a model for replication control based on random, dynamic contacts between incA iterons and the origin. This system would display randomness with respect to choice of templates and timing of initiation if multiple replicon copies were present, but would tend to act in a machine-like fashion in concert with the cell cycle if just two copies were present in a dividing cell.     

Mini-P1 plasmid replication: the autoregulation-sequestration paradox

It has been proposed that the initiator protein RepA is rate limiting for mini-P1 plasmid replication, and that the role of the plasmid copy number control locus is to sequester the initiator and thus reduce replication. This proposal appears inconsistent with the observation that RepA is autoregulated, since the protein lost by sequestration should be replenished. A resolution of this autoregulation-sequestration paradox is possible if the sequestered RepA, unavailable for replication, is still available for promoter repression. We demonstrate that RepA binds to the control locus and to the promoter region simultaneously, causing the intervening DNA to loop. DNA looping could provide the requisite mechanism by which RepA bound to the control locus might exert repression.     

P1 plasmid replication. Purification and DNA-binding activity of the replication protein RepA

The minimal P1 replicon encompasses an open reading frame for the essential replication protein, RepA, bracketed by two sets of multiple 19-base pair repeated sequences, incA and incC. This study focused on the interaction of RepA with the incC and incA repeated sequences because earlier studies suggested that incA might control P1 copy number by titrating limiting amounts of RepA and because the incC repeats, which are part of the origin of replication, contain the promoter for repA. RepA is essential for origin function, autoregulates its own synthesis from the promoter, and, when overproduced, blocks origin function. In this study, RepA was overproduced from an expression vector and purified to 90% homogeneity. The binding of RepA to the DNA encompassing repeat sequences was assayed by monitoring the mobility of protein-DNA complexes on polyacrylamide gels. Distinct species of retarded bands were seen with the maximum number of bands corresponding to the number of repeats present in the target fragment. No evidence was found for RepA binding to fragments not containing the repeats. This suggests that the specific binding of RepA to the repeats may be involved in each of the diverse activities of RepA.     

Plasmid copy number mutation in repA gene encoding RepA replication initiator of cryptic plasmid pHM1519 in Corynebacterium glutamicum

ABSTRACT

Cryptic plasmid pHM1519 is a rolling-circular replication mode plasmid of the pCG1 plasmid family in coryneform bacteria. The derived shuttle vector pPK4 is maintained at about 40–50 copies per chromosome in Corynebacterium glutamicum 2256 (ATCC 13869). We found that a mutation (designated copA1) within the repA gene encoding essential initiator protein RepA of the pHM1519-replicon increased the copy number of the mutant plasmid to about 800 copies per chromosome. The mutation was a single G to A base transition, which changed Gly to Glu at position 429 of the amino acid sequence of RepA. In silico secondary structure prediction of RepA suggested that Gly429 is situated in a disordered region in a helix-turn-helix motif, which is a typical DNA-binding domain. This study shows the first example of a high copy number of a C. glutamicum cryptic plasmid caused by an altered replication initiator protein.     

A single amino acid difference between Rep proteins of P1 and P7 affects plasmid copy number

P1 and P7 are closely related plasmid prophages which are members of the same incompatibility group. We report the complete DNA sequence of the replication region of P7 and compare it to that of P1. The sequence predicts a single amino acid difference between the RepA proteins of these two plasmids, no differences in methylation sites or regions where dnaA protein is expected to bind, and no difference in the spacing of the major features of the two replicons. A P1 replicon with a mutation in repA, the gene that encodes an essential replication protein, is complemented for replication by providing either the P1 RepA protein (RepA1) or the P7 RepA protein (RepA7) in trans. Furthermore, when either of these proteins is supplied in trans, the plasmid copy number of P1 cop mutants drops to that of P1 cop+. However, when RepA7 is supplied, the copy number of P1 cop and P1 cop+ is higher than that when RepA1 is supplied. This indicates that the single amino acid difference between the two versions of the RepA protein plays an important role in determining the plasmid copy number.     

Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.     

The RepA protein of plasmid pSC101 controls Escherichia coli cell division through the SOS response

Although plasmid copy number varies widely among different plasmid species, normally copy number is maintained within a narrow range for any given plasmid. Such copy number control has been shown to occur by regulation of the rate of plasmid DNA replication. Here we report a novel mechanism by which the pSC101 plasmid also can detect an imbalance between the cellular level of its replication protein, RepA, and plasmid-borne RepA binding sites to inhibit bacterial DNA replication and delay host cell division when RepA is in relative excess. We show that delayed cell division occurs by RepA-mediated induction of the SOS response and can be reversed by over-expression of the host DNA primase, DnaG. The effects of RepA excess are prevented by introducing a surfeit of RepA binding sites. The mechanism reported here may help to limit variation in plasmid copy number and allow repopulation of cells with plasmids when copy number falls--potentially pre-empting plasmid loss in cultures of dividing cells.     

Participation of the Escherichia coli heat shock proteins DnaJ, DnaK, and GrpE in autorepression of the P1 plasmid repA promoter

The replicon of the low copy number plasmid P1 uses the three Escherichia coli heat shock proteins DnaJ, DnaK, and GrpE for the efficient initiation of its DNA replication. The only P1-encoded protein required for plasmid replication is the initiator, RepA. Binding of RepA to the origin also represses the promoter for the repA gene, which is located within the origin. We found that repression is incomplete in E. coli strains with mutations in the dnaJ, dnaK, or grpE genes. Since there is no decrease in RepA concentration in the mutant strains, the mutations are likely to affect the protein-DNA or protein-protein reactions required for repression, thereby decreasing RepA binding at its promoter. We also showed that the deficit in repression can be overcome by providing excess RepA, implying that the mechanism of repression is not altered in the mutant strains. Since repression requires RepA binding to the origin, a binding deficit might account for the replication defect in the heat shock mutants.     

Excess intracellular concentration of the pSC101 RepA protein interferes with both plasmid DNA replication and partitioning.

RepA, a plasmid-encoded gene product required for pSC101 replication in Escherichia coli, is shown here to inhibit the replication of pSC101 in vivo when overproduced 4- to 20-fold in trans. Unlike plasmids whose replication is prevented by mutations in the repA gene, plasmids prevented from replicating by overproduction of the RepA protein were lost rapidly from the cell population instead of being partitioned evenly between daughter cells. Removal of the partition (par) locus increased the inhibitory effect of excess RepA on replication, while host and plasmid mutations that compensate for the absence of par, or overproduction of the E. coli DnaA protein, diminished it. A repA mutation (repA46) that elevates pSC101 copy number almost entirely eliminated the inhibitory effect of RepA at high concentration and stimulated replication when the protein was moderately overproduced. As the RepA protein can exist in both monomer and dimer forms, we suggest that overproduction promotes RepA dimerization, reducing the formation of replication initiation complexes that require the RepA monomer and DnaA; we propose that the repA46 mutation alters the ability of the mutant protein to dimerize. Our discovery that an elevated intracellular concentration of RepA specifically impedes plasmid partitioning implies that the RepA-containing complexes initiating pSC101 DNA replication participate also in the distribution of plasmids at cell division.     

Replication of Enterococcus faecalis pheromone-responding plasmid pAD1: location of the minimal replicon and oriV site and RepA involvement in initiation of replication

The hemolysin-determining plasmid pAD1 is a member of a widely disseminated family of highly conjugative elements commonly present in clinical isolates of Enterococcus faecalis. The determinants repA, repB, and repC, as well as adjacent iteron sequences, are believed to play important roles in pAD1 replication and maintenance. The repA gene encodes an initiator protein, whereas repB and repC encode proteins related to stability and copy number. The present study focuses specifically on repA and identifies a replication origin (oriV) within a central region of the repA determinant. A small segment of repA carrying oriV was able to support replication in cis of a plasmid vector otherwise unable to replicate, if an intact RepA was supplied in trans. We demonstrate that under conditions in which RepA is expressed from an artificial promoter, a segment of DNA carrying only repA is sufficient for stable replication in E. faecalis. We also show that RepA binds specifically to oriV DNA at several sites containing inverted repeat sequences (i.e., IR-1) and nonspecifically to single-stranded DNA, and related genetic analyses confirm that these sequences play an important role in replication. Finally, we reveal a relationship between the internal structure of RepA and its ability to recognize oriV. An in-frame deletion within repA resulting in loss of 105 nucleotides, including at least part of oriV, did not eliminate the ability of the altered RepA protein to initiate replication using an intact origin provided in trans. The relationship of RepA to other known initiator proteins is also discussed.     

A louse involved in the regulation of replication in plasmid pSC 101

The origin of replication of plasmid pSC101 contains three directly repeated sequences RS1, RS2, and RS3 separated by 22 bp from two palindromic sequences, IR1 and IR2, which are partially homologous to the direct repeats. These inverted repeat (IR) sequences overlap the promoter of the repA gene which encodes a protein essential for plasmid replication. We have shown that RepA binds to the RS sites as a monomer and to the IR sites as a dimer. The influence of the IR1 site, and of the DNA segment that separates it from RS3, on plasmid copy number control has been studied in detail. We show that the integrity of IR1 is essential for efficient replication and plasmid stability, the critical site extending to the left of IR1 proper. We also show that the presence of IR1 modifies profoundly the binding properties of purified RepA protein to a segment of DNA containing the RS sequences. IR1 is separated from its homologous site on RS3 by approximately four turns of the DNA helix. Replication is abolished if this distance is increased by half a turn of the helix but it is restored if the distance is increased by a whole turn. These results suggest a DNA looping interaction, in the initiation of replication, between the RepA dimer that binds iR1 and the RepA monomers that bind the RS sequences.     

Structural and functional similarities between the replication region of the Yersinia virulence plasmid and the RepFIIA replicons.

We sequenced the minimum replication region of the virulence plasmid pYVe439-80 from a serogroup O:9 Yersinia enterocolitica. This sequence is 68% homologous on a 1,873-nucleotide stretch to the sequence of the RepFIIA replicon of the resistance plasmid R100. The sequence contains two open reading frames, repA and repB, encoding proteins of 33,478 and 9,568 daltons, respectively. The amino acid sequences of the two proteins are 77 and 55% identical, respectively, to proteins RepA1 and RepA2 of the R100 replicon. Analysis of minicells transformed with a copy number mutant demonstrated that the replication region of pYVe439-80 directs the synthesis of a 33-kilodalton protein. Disruption of repA, encoding this protein, abolished replication. Two regions of pYVe439-80 are 76 and 70% homologous, respectively, to the copy number control antisense RNA and to the origin of replication region of R100. A mutation introduced in the pYVe439-80 DNA corresponding to the R100 sequence encoding the copy number control antisense RNA resulted in an increase in copy number, indicating a functional homology between the two replicons.     

Negative control of plasmid pSC101 replication by increased concentrations of both initiator protein and iterons

Increased intracellular concentrations of the initiator protein Rep (or RepA) interfere with pSC101 DNA replication, and mutated Rep proteins that result in an increase in plasmid copy numbers do not inhibit the replication. A rep mutant (rep(inh)) defective in the inhibitory activity was isolated and found to be a new high copy number mutant. The inhibitory function of Rep was enhanced by the coexistence of directly repeated sequences (DR; iterons) in the replication origin region (ori), but not by the inverted repeat sequences (IR) in ori and the rep promoter. This synergistic effect of Rep and DR sequences for the replication inhibition was dependent on their intracellular concentrations. Considering that DR sequences are the specific binding sites of the Rep monomer form, the Rep monomer-DR complex might be responsible for the inhibition of the plasmid replication. Furthermore, the Rep monomer in the crude cell extracts facilitated dimerization of DR DNA fragments by DNA ligase. Neither synergistic inhibitory function with DR nor Rep mediated dimerization of DR DNA was observed in high copy number mutant Rep proteins. The role of the Rep-iteron complex in the copy number control of pSC101 is discussed.