Functionalization of poly(methyl methacrylate) (PMMA) as a substrate for DNA microarrays

A chemical procedure was developed to functionalize poly(methyl methacrylate) (PMMA) substrates. PMMA is reacted with hexamethylene diamine to yield an aminated surface for immobilizing DNA in microarrays. The density of primary NH₂ groups was 0.29 nmol/cm². The availability of these primary amines was confirmed by the immobilization of DNA probes and hybridization with a complementary DNA strand. The hybridization signal and the hybridization efficiency of the chemically aminated PMMA slides were comparable to the hybridization signal and the hybridization efficiency obtained from differently chemically modified PMMA slides, silanized glass, commercial silylated glass and commercial plastic Euray™ slides. Immobilized and hybridized densities of 10 and 0.75 pmol/cm², respectively, were observed for microarrays on chemically aminated PMMA. The immobilized probes were heat stable since the hybridization performance of microarrays subjected to 20 PCR heat cycles was only reduced by 4%. In conclusion, this new strategy to modify PMMA provides a robust procedure to immobilize DNA, which is a very useful substrate for fabricating single use diagnostics devices with integrated functions, like sample preparation, treatment and detection using microfabrication and microelectronic techniques.     

Multisubstrate-compatible ELISA procedures for rapid and high-sensitivity immunoassays

This protocol describes an improved and optimized approach to develop rapid and high-sensitivity ELISAs by covalently immobilizing antibody on chemically modified polymeric surfaces. The method involves initial surface activation with KOH and an O(2) plasma, and then amine functionalization with 3-aminopropyltriethoxysilane. The second step requires covalent antibody immobilization on the aminated surface, followed by ELISA. The ELISA procedure developed is 16-fold more sensitive than established methods. This protocol could be used generally as a quantitative analytical approach to perform high-sensitivity and rapid assays in clinical situations, and would provide a faster approach to screen phage-displayed libraries in antibody development facilities. The antibody immobilization procedure is of ～3 h duration and facilitates rapid ELISAs. This method can be used to perform assays on a wide range of commercially relevant solid support matrices (including those that are chemically inert) with various biosensor formats.     

Study of the quality of aminated substrates used for hybridization analysis

A set of methods for analysis of the quality of aminated substrates that could be a basis for the large-scale manufacturing of biological microchips is suggested. The analysis includes the determination of the number of amino groups, their availability for the immobilization of phosphorylated oligonucleotides, and the characterization of surface properties of the substrates in respect to the nonspecific sorption of reagents during hybridization. A simple procedure was suggested for determination of the density/number of amino groups. It is based on the use of dimethoxytrityl chloride with the subsequent spectrophotometric determination of dimethoxytrityl cation. The availability of amino groups was estimated by covalent attachment of an oligonucleotide probe containing a fluorescently labeled group to the aminated surface and the subsequent comparison of the intensity of fluorescing zones formed on the chip. The sorption properties of the surface were investigated with the help of a model hybridization reaction. A comparative analysis of aminated glasses manufactured by various firms and in our laboratory showed that the glasses with the amino group density from 0.7 to 2.0 groups/nm2 prepared by our procedure have the best properties for the hybridization analysis.     

Study of the quality of aminated substrates used for hybridization analysis

A set of methods for analysis of the quality of aminated substrates that could be a basis for the large-scale manufacturing of biological microchips is suggested. The analysis includes the determination of the number of amino groups, their availability for the immobilization of phosphorylated oligonucleotides, and the characterization of surface properties of the substrates in respect to the nonspecific sorption of reagents during hybridization. A simple procedure was suggested for determination of the density/number of amino groups. It is based on the use of dimethoxytrityl chloride with the subsequent spectrophotometric determination of dimethoxytrityl cation. The availability of amino groups was estimated by covalent attachment of an oligonucleotide probe containing a fluorescently labeled group to the aminated surface and the subsequent comparison of the intensity of fluorescing zones formed on the chip. The sorption properties of the surface were investigated with the help of a model hybridization reaction. A comparative analysis of aminated glasses manufactured by various firms and in our laboratory showed that the glasses with the amino group density from 0.7 to 2.0 groups/nm² prepared by our procedure have the best properties for the hybridization analysis.     

Chemical derivatization of compact disc polycarbonate surfaces for SNPs detection

Compact discs have been proposed as an efficient analytical platform, with potential to develop high-throughput affinity assays for genomics, proteomics, clinics, and health monitoring. Chemical derivatization of CD surfaces is one of the keys to developing highly efficient microarraying-based assays on discs. Approaches for mild chemical modification of polycarbonate (PC) disc surface based on nitration, reduction, and chloromethylation reactions have been developed. Derivatized surfaces as amino and thiol are obtained for PC, maintaining unchanged the mechanical and optical properties of the discs. Studies of covalent attachment of oligonucleotide probes (5' Cy5-labeled, 3' NH 2-ended) on the modified surfaces have been performed to develop microarraying assays based on hybridization of cDNA strands and single nucleotide polymorphism discrimination (SNPs). A demonstration of the applicability to the compact disc audio/video technology for its use as analytical system is performed, including the employment of a commercial CD player to read the results on disc.     

A novel impedimetric aptasensor,based on functionalized carbon nanotubes and prussian blue as labels

A simple and feasible electrochemical sensing protocol was developed for the detection of bisphenol A (BPA) by employing the gold nanoparticles (AuNPs), prussian blue (PB) and functionalized carbon nanotubes (AuNPs/PB/CNTs-COOH). An aminated complementary DNA as a capture probe and specific aptamer against BPA as a detection probe was immobilized on the surface of a modified glassy carbon (GC) electrode via the formation of covalent amide bond and hybridization, respectively. The proposed nanoaptasensor combined the advantages of the in situ formation of PB as a label, the deposition of neatly arranged AuNPs, and the covalent attachment of the capture probe to the surface of the modified electrode. Upon addition of target BPA, the analyte reacted with the aptamer and caused the steric/conformational restrictions on the sensing interface. The formation of BPA–aptamer complex at the electrode surface retarded the interfacial electron transfer reaction of the PB as a probe. Sensitive quantitative detection of BPA was carried out based on the variation of electron transfer resistance which relevant to the formation of BPA– aptamer complex at the modified electrode surface. Under the optimized conditions, the proposed aptasensor exhibited a high sensitivity, wide linearity to BPA and low detection limit. This aptasensor also displayed a satisfying electrochemical performance with good stability, selectivity and reproducibility.     

Directed covalent immobilization of aminated DNA probes on aminated plates

A new protocol that enables the immobilization of DNA probes on aminated micro-titer plates activated with aldehyde-dextran via an amino group artificially introduced in the 3' end of the oligonucleotide probe is reported in this work. The method is based on the use of hetero-functional-dextran as a long and multifunctional spacer arm covalently attached to an aminated surface capable of immobilizing DNA oligonucleotides. The immobilization occurred only via the amino introduced in the 3' end of the probe, with no implication of the DNA bases in the immobilization, ensuring that the full length of the probe is available for hybridization. These plates having immobilized oligonucleotide probes are able to hybridize complementary DNA target molecules. The tailor-made hetero-functional aldehyde-aspartic-dextran together with the chemical blocking of the remaining primary amino groups on the support using acetic anhydride avoid the nonspecific adsorption of DNA on the surface of the plates. Using these activated plates, (studying the effect of the probe concentration, temperature, and time of the plate activation on the achieved signal), thus, the covalent immobilization of the aminated DNA probe was optimized, and the sensitivity obtained was similar to that achieved using commercial biotin-streptavidin systems. The new DNA plates are stable under very drastic experimental conditions (90% formamide, at 100 degrees C for 30 min or in 100 mM NaOH).     

Direct hapten-linked multiplexed immunoassays on polycarbonate surface

Direct hapten-linked multiplexed immunoassay is developed on the polycarbonate surface of standard Digital Versatile Discs (DVDs) for six compounds of environmental concern, as proof of concept. Carboxylated haptens are directly linked to the aminated polycarbonate surface through carbodiimide/succinimide coupling. The modified DVD surface maintained its physical and optical properties. Multiplexed assay reached detection limits down to 0.1 μg/L for chlorpyrifos, 2,4,5-trichlorophenoxypropionic acid, sulfathiazole and sulfasalazine and down to 1.0 μg/L for fenthion and malathion. This approach presents advantages such as the improvement in sensitivity in comparison to protein-hapten conjugate format for all the studied analytes and the absence of cross-interference effects, allowing high throughput multianalysis on the same surface. Also, a comparison of the performance of two sensing strategies indicated that DVD disc and drive approach turned out in a simpler mode, the assays being more reproducible and with higher signal to noise ratios.     

An Electrostatic Model for DNA Surface Hybridization

DNA hybridization at surfaces is a crucial process for biomolecular detection, genotyping, and gene expression analysis. However, hybridization density and kinetics can be strongly inhibited by electric fields from the negatively charged DNA as the reaction proceeds. Here, we develop an electrostatic model to optimize hybridization density and kinetics as a function of DNA surface density, salt concentrations, and applied voltages. The electrostatic repulsion from a DNA surface layer is calculated numerically and incorporated into a modified Langmuir scheme, allowing kinetic suppression of hybridization. At the low DNA probe densities typically used in assays (<10¹³/cm²), electrostatics effects are largely screened and hybridization is completed with fast kinetics. However, higher hybridization densities can be achieved at intermediate DNA surface densities, albeit with slower kinetics. The application of positive voltages circumvents issues resulting from the very high DNA probe density, allowing highly enhanced hybridization densities and accelerated kinetics, and validating recent experimental measurements.     

Effect of Air Plasma Processing on the Adsorption Behaviour of Bovine Serum Albumin on Spin-Coated PMMA Surfaces

This paper reports the adsorption of Bovine Serum Albumin （BSA） onto Dielectric Barrier Discharge （DBD） processed Poly（methyl methacrylate） （PMMA） surfaces by a Quartz Crystal Microbalance with Dissipation monitoring （QCM-D） technique. The purpose is to study the influence of DBD processing on the nature and scale of BSA adsorption on PMMA surface in vitro. It was observed that DBD processing improves the surface wettability of PMMA film, a fact attributable to the changes in surface chemistry and topography. Exposure of the PMMA to Phosphate Buffed Saline （PBS） solution in the QCM-D system resulted in surface adsorption which reaches an equilibrium after about 30 minutes for pristine PMMA, and 90 minutes for processed PMMA surface. Subsequent injection of BSA in PBS indicated that the protein is immediately adsorbed onto the PMMA surface. It was revealed that adsorption behaviour of BSA on pristine PMMA differs from that on processed PMMA surface. A slower adsorption kinetics was observed for pristine PMMA surface, whilst a quick adsorption kinetics for processed PMMA. Moreover, the dissipation shift of protein adsorption suggested that BSA forms a more rigid structure on pristine PMMA surface that on processed surface. These data suggest that changes in wettability and attendant chemical properties and surface texture of the PMMA surface may play a significant role in BSA adsorption process.     

Detecting minimal traces of DNA using DNA covalently attached to superparamagnetic nanoparticles and direct PCR-ELISA

A single bond covalent immobilization of aminated DNA probes on magnetic particles suitable for selective molecular hybridization of traces of DNA samples has been developed. Commercial superparamagnetic nanoparticles containing amino groups were activated by coating with a hetero-functional polymer (aldehyde-aspartic-dextran). This new immobilization procedure provides many practical advantages: (a) DNA probes are immobilized far from the support surface preventing steric hindrances; (b) the surface of the nanoparticles cannot adsorb DNA ionically; (c) DNA probes are bound via a very strong covalent bond (a secondary amine) providing very stable immobilized probes (at 100 degrees C, or in 70% formamide, or 0.1N NaOH). Due to the extreme sensitivity of this purification procedure based on DNA hybridization, the detection of hybridized products could be coupled to a PCR-ELISA direct amplification of the DNA bond to the magnetic nanoparticles. As a model system, an aminated DNA probe specific for detecting Hepatitis C Virus cDNA was immobilized according to the optimised procedure described herein. Superparamagnetic nanoparticles containing the immobilized HCV probe were able to give a positive result after PCR-ELISA detection when hybridized with 1 mL of solution containing 10(-18) g/mL of HCV cDNA (two molecules of HCV cDNA). In addition, the detection of HCV cDNA was not impaired by the addition to the sample solution of 2.5 million-fold excess of non-complementary DNA. The experimental data supports the use of magnetic nanoparticles containing DNA probes immobilized by the procedure here described as a convenient and extremely sensitive procedure for purification/detection DNA/RNA from biological samples. The concentration/purification potential of the magnetic nanoparticles, its stability under a wide range of conditions, coupled to the possibility of using the particles directly in amplification by PCR greatly reinforces this methodology as a molecular diagnostic tool.     

Solid-phase chemical amination of a lipase from Bacillus thermocatenulatus to improve its stabilization via covalent immobilization on highly activated glyoxyl-agarose

In this paper, the stabilization of a lipase from Bacillus thermocatenulatus (BTL2) by a new strategy is described. First, the lipase is selectively adsorbed on hydrophobic supports. Second, the carboxylic residues of the enzyme are modified with ethylenediamine, generating a new enzyme having 4-fold more amino groups than the native enzyme. The chemical amination did not present a significant effect on the enzyme activity and only reduced the enzyme half-life by a 3-4-fold factor in inactivations promoted by heat or organic solvents. Next, the aminated and purified enzyme is desorbed from the support using 0.2% Triton X-100. Then, the aminated enzyme was immobilized on glyoxyl-agarose by multipoint covalent attachment. The immobilized enzyme retained 65% of the starting activity. Because of the lower p K of the new amino groups in the enzyme surface, the immobilization could be performed at pH 9 (while the native enzyme was only immobilized at pH over 10). In fact, the immobilization rate was higher at this pH value for the aminated enzyme than that of the native enzyme at pH 10. The optimal stabilization protocol was the immobilization of aminated BTL2 at pH 9 and the further incubation for 24 h at 25 degrees C and pH 10. This preparation was 5-fold more stable than the optimal BTL2 immobilized on glyoxyl agarose and around 1200-fold more stable than the enzyme immobilized on CNBr and further aminated. The catalytic properties of BTL2 could be greatly modulated by the immobilization protocol. For example, from (R/S)-2- O-butyryl-2-phenylacetic acid, one preparation of BTL2 could be used to produce the S-isomer, while other preparation produced the R-isomer.     

Quantification of primary amine groups available for subsequent biofunctionalization of polymer surfaces

Biocompatible polymers are commonly functionalized with specific moieties such as amino groups to modify their surface properties and/or to attach bioactive compounds. A reliable method is usually required to characterize amino group surface densities. In this study, aminated polyethylene terephthalate (PET) films were generated via an aminolysis reaction involving either ethylenediamine molecules (EtDA), in order to vary easily the amino group density on PET surfaces, or 25 kDa polyvinylamine (PVAm) as an alternative reagent preventing bulk damages resulting from the aminolysis reaction. Among commonly used dyes for amino group quantification, Orange II and Coomassie Brillant Blue (CBB) were selected to quantify the extent of amine grafting resulting from these derivatization procedures. Rapid and convenient colorimetric assays were compared to surface atomic compositions obtained from X-ray photoelectron spectroscopy (XPS) measurements. Orange II was found to be the most appropriate dye for quantifying primary amine groups in a reliable and specific way. Due to its unique negative charge and low steric hindrance compared to CBB, the Orange II dye was very sensitive and provided reliable quantification over a wide range of amino group surface densities (ca. 5 to at least 200 pmol/mm(2)). In order to further validate the use of the Orange II dye for amino group quantification, a heterobifunctional linker reacting with amino groups was then grafted on modified PET surfaces. Interestingly, the good correlation between the densities of adsorbed Orange II and covalently grafted linkers suggests that the Orange II method is a relevant, reliable, easy, and inexpensive method to predict the amount of amino groups available for subsequent functionalization of polymer surfaces.     

An integrated, stacked microlaboratory for biological agent detection with DNA and immunoassays

An integrated, stacked microlaboratory for performing automated electric-field-driven immunoassays and DNA hybridization assays was developed. The stacked microlaboratory was fabricated by orderly laminating several different functional layers (all 76 x 76 mm(2)) including a patterned polyimide layer with a flip-chip bonded CMOS chip, a pressure sensitive acrylic adhesive (PSA) layer with a fluidic cutout, an optically transparent polymethyl methacrylate (PMMA) film, a PSA layer with a via, a patterned polyimide layer with a flip-chip bonded silicon chip, a PSA layer with a fluidic cutout, and a glass cover plate layer. Versatility of the stacked microlaboratory was demonstrated by various automated assays. Escherichia coli bacteria and Alexa-labeled protein toxin staphylococcal enterotoxin B (SEB) were detected by electric-field-driven immunoassays on a single chip with a specific-to-nonspecific signal ratios of 4.2:1 and 3.0:1, respectively. Furthermore, by integrating the microlaboratory with a module for strand displacement amplification (SDA), the identification of the Shiga-like toxin gene (SLT1) from E. coli was accomplished within 2.5 h starting from a dielectrophoretic concentration of intact E. coli bacteria and finishing with an electric-field-driven DNA hybridization assay, detected by fluorescently labeled DNA reporter probes. The integrated microlaboratory can be potentially used in a wide range of applications including detection of bacteria and biowarfare agents, and genetic identification.     

Comparison between different strategies of covalent attachment of DNA to glass surfaces to build DNA microarrays

DNA microarray is a powerful tool allowing simultaneous detection of many different target molecules present in a sample. The efficiency of the array depends mainly on the sequence of the capture probes and the way they are attached to the support. The coupling procedure must be quick, covalent, and reproducible in order to be compatible with automatic spotting devices dispensing tiny drops of liquids on the surface. We compared several coupling strategies currently used to covalently graft DNA onto a glass surface. The results indicate that fixation of aminated DNA to an aldehyde-modified surface is a choice method to build DNA microarrays. Both the coupling procedure and the hybridization efficiency have been optimized. The detection limit of human cytomegalovirus target DNA amplicons on such DNA microarrays has been estimated to be 0.01 nM by fluorescent detection.     

Sensitive detection of EGFR mutations using a competitive probe to suppress background in the SMart Amplification Process.

In a previous study, a single nucleotide polymorphism (SNP) diagnostic system named the SMart Amplification Process version 2 (SMAP 2) was reported, which enabled rapid gene diagnostics from crude samples such as whole blood. The asymmetric primer design and use of Taq MutS were reported as innovative background suppression technologies employed by SMAP 2, but Taq MutS is known to display differential affinities for various mismatch combinations, and hence may not be entirely effective for all possible applications. To address this issue we developed another approach using a competitive probe (CP) to enhance background suppression technology instead of Taq MutS. CP is a 3'-end aminated oligonucleotide that competes with 3'-end of a discrimination primer or the self-priming elongation site on intermediate product 2 (IM2) for non-target sequences, such as the alternative allele. The preferred hybridization kinetics for the full-match CP on the non-target sequence results in effective background suppression in SMAP 2 assays. By using a CP, we demonstrated the sensitive detection of EGFR gene mutations in purified genomic DNA from mixed cell populations. The CP approach is another tool enhancing the effectiveness and versatility of SMAP 2 assays, expanding its potential applications, and reinforcing its position as a highly effective technology for molecular diagnostics.     

Improved stabilization of chemically aminated enzymes via multipoint covalent attachment on glyoxyl supports

The surface carboxylic groups of penicillin G acylase and glutaryl acylase were chemically aminated in a controlled way by reaction with ethylenediamine via the 1-ethyl-3-(dimethylamino-propyl) carbodiimide coupling method. Then, both proteins were immobilized on glyoxyl agarose. In both cases, the immobilization of the chemically modified enzymes improved the enzyme stability compared to the stability of the immobilized but non-modified enzyme (by a four-fold factor in the case of PGA and a 20-fold factor in the case of GA). The chemical modification presented a deleterious effect on soluble enzyme stability. Therefore, the improved stability should be related to a higher multipoint covalent attachment, involving both the lysine amino groups and also the new amino groups chemically introduced on the enzyme. Moreover, the lower pK(a) of the new amino groups permitted to immobilize the enzyme under milder conditions. In fact, the aminated proteins could be immobilized even at pH 9, while the non-modified enzymes could only be immobilized at pH over 10.     

Electrochemical detection of DNA hybridization using a change in flexibility

A novel electrochemical method of detecting DNA hybridization is presented based on the change in flexibility between the single and double stranded DNA. A recognition surface based on gold nanoparticles (GNPs) is firstly modified via mixing self-assembled monolayer of thiolated probe DNA and 1,6-hexanedithiol. The hybridization and electrochemical detection are performed on the surface of probe-modified GNPs and electrode, respectively. Here in our method the charge transfer resistance (R(ct)) signal is enhanced by blocking the surface of electrode with DNA covered GNPs. The GNPs will be able to adsorb on the gold electrode when covered with flexible single stranded DNA (ssDNA). On the contrary, it will be repelled from the electrode, when covered with stiff double stranded DNA (dsDNA). Therefore, different R(ct) signals are observed before and after hybridization. The hybridization events are monitored by electrochemical impedance spectroscopy (EIS) measurement based on the R(ct) signals without any external labels. This method provides an alternative route for expanding the range of detection methods available for DNA hybridization.     

Fabrication of DNA microarrays onto polymer substrates using UV modification protocols with integration into microfluidic platforms for the sensing of low-abundant DNA point mutations

We describe the microfabrication and operational characteristics of a simple flow-through biochip sensor capable of detecting low abundant point mutations in K-ras oncogenes from genomic DNA, which carry high diagnostic value for colorectal cancers. The biochip consisted of an allele-specific ligase detection reaction (LDR) coupled to a universal array for interrogating multiple mutations simultaneously from a clinical sample. The integrated sensing platform was micro-manufactured from two different polymers, polycarbonate, PC, which was used for the LDRs, and poly(methyl methacrylate), PMMA, which was used to build the microarray. Passive elements were hot embossed into the PC and PMMA microchips and then, the chips assembled into a three-dimensional architecture with the interconnect fabricated from an elastomer, poly(dimethylsiloxane), PDMS, to produce a leak-free connection between the biochips. The array in PMMA was produced using a photomodification process, which involved three steps; (1) UV (254 nm) exposure of the polymer surface; (2) EDC coupling of amine-terminated oligonucleotide probes to the surface (via an amide bond) and; (3) washing of the surface. The LDR/hybridization flow-through biochip performed the entire assay at a relatively fast processing speed: 6.5 min for on-chip LDR, 10 min for washing, and 2.6 min for fluorescence scanning (total processing time=19.1 min) and could screen multiple mutations simultaneously for high throughput applications at a level of one mutant sequence in 100 wild-type sequences.