NMR studies of the fifth transmembrane segment of Na+,K+-ATPase reveals a non-helical ion-binding region

The structure of a synthetic peptide corresponding to the fifth membrane-spanning segment (M5) in Na(+),K(+)-ATPase in sodium dodecyl sulfate (SDS) micelles was determined using liquid-state nuclear magnetic resonance (NMR) spectroscopy. The spectra reveal that this peptide is substantially less alpha-helical than the corresponding M5 peptide of Ca(2+)-ATPase. A well-defined alpha-helix is shown in the C-terminal half of the peptide. Apart from a short helical stretch at the N-terminus, the N-terminal half contains a non-helical region with two proline residues and sequence similarity to a non-structured transmembrane element of the Ca(2+)-ATPase. Furthermore, this region spans the residues implicated in Na(+) and K(+) transport, where they are likely to offer the flexibility needed to coordinate Na(+) as well as K(+) during active transport.     

Detailed characterization of the cooperative mechanism of Ca(2+) binding and catalytic activation in the Ca(2+) transport (SERCA) ATPase

Expression of heterologous SERCA1a ATPase in Cos-1 cells was optimized to yield levels that account for 10-15% of the microsomal protein, as revealed by protein staining on electrophoretic gels. This high level of expression significantly improved our characterization of mutants, including direct measurements of Ca(2+) binding by the ATPase in the absence of ATP, and measurements of various enzyme functions in the presence of ATP or P(i). Mutational analysis distinguished two groups of amino acids within the transmembrane domain: The first group includes Glu771 (M5), Thr799 (M6), Asp800 (M6), and Glu908 (M8), whose individual mutations totally inhibit binding of the two Ca(2+) required for activation of one ATPase molecule. The second group includes Glu309 (M4) and Asn796 (M6), whose individual or combined mutations inhibit binding of only one and the same Ca(2+). The effects of mutations of these amino acids were interpreted in the light of recent information on the ATPase high-resolution structure, explaining the mechanism of Ca(2+) binding and catalytic activation in terms of two cooperative sites. The Glu771, Thr799, and Asp800 side chains contribute prominently to site 1, together with less prominent contributions by Asn768 and Glu908. The Glu309, Asn796, and Asp800 side chains, as well as the Ala305 (and possibly Val304 and Ile307) carbonyl oxygen, contribute to site 2. Sequential binding begins with Ca(2+) occupancy of site 1, followed by transition to a conformation (E') sensitive to Ca(2+) inhibition of enzyme phosphorylation by P(i), but still unable to utilize ATP. The E' conformation accepts the second Ca(2+) on site 2, producing then a conformation (E' ') which is able to utilize ATP. Mutations of residues (Asp813 and Asp818) in the M6/M7 loop reduce Ca(2+) affinity and catalytic turnover, suggesting a strong influence of this loop on the correct positioning of the M6 helix. Mutation of Asp351 (at the catalytic site within the cytosolic domain) produces total inhibition of ATP utilization and enzyme phosphorylation by P(i), without a significant effect on Ca(2+) binding.     

Three-dimensional structure in lipid micelles of the pediocin-like antimicrobial peptide curvacin A

The 3D structure of the membrane-permeabilizing 41-mer pediocin-like antimicrobial peptide curvacin A produced by lactic acid bacteria has been studied by NMR spectroscopy. In DPC micelles, the cationic and hydrophilic N-terminal half of the peptide forms an S-shaped beta-sheet-like domain stabilized by a disulfide bridge and a few hydrogen bonds. This domain is followed by two alpha-helices: a hydrophilic 6-mer helix between residues 19 and 24 and an amphiphilic/hydrophobic 11-mer helix between residues 29 and 39. There are two hinges in the peptide, one at residues 16-18 between the N-terminal S-shaped beta-sheet-like structure and the central 6-mer helix and one at residues 26-28 between the central helix and the 11-mer C-terminal helix. The latter helix is the only amphiphilic/hydrophobic part of the peptide and is thus presumably the part that penetrates into the hydrophobic phase of target-cell membranes. The hinge between the two helices may introduce the flexibility that allows the helix to dip into membranes. The helix-hinge-helix structure in the C-terminal half of curvacin A clearly distinguishes this peptide from the other pediocin-like peptides whose structures have been analyzed and suggests that curvacin A along with the structural homologues enterocin P and carnobacteriocin BM1 belong to a subgroup of the pediocin-like family of antimicrobial peptides.     

Conformational analysis of a mitochondrial presequence derived from the F1-ATPase beta-subunit by CD and NMR spectroscopy.

Previous studies on mitochondrial targeting presequences have indicated that formation of an amphiphillic helix may be required for efficient targeting of the precursor protein into mitochondria, but the structural details are not well understood. We have used CD and NMR spectroscopy to characterize in detail the structure of a synthetic peptide corresponding to the presequence for the beta-subunit of F1-ATPase, a mitochondrial matrix protein. Although this peptide is essentially unstructured in water, alpha-helix formation is induced when the peptide is placed in structure-promoting environments, such as SDS micelles or aqueous trifluoroethanol (TFE). In 50% TFE (by volume), the peptide is in dynamic equilibrium between random coil and alpha-helical conformations, with a significant population of alpha-helix throughout the entire peptide. The helix is somewhat more stable in the N-terminal part of the presequence (residues 4-10), and this result is consistent with the structure proposed previously for the presequence of another mitochondrial matrix protein, yeast cytochrome oxidase subunit IV. Addition of increasing amounts of TFE causes the alpha-helical content to increase even further, and the TFE titration data for the presequence peptide of the F1-ATPase beta-subunit are not consistent with a single, cooperative transition from random coil to alpha-helix. There is evidence that helix formation is initiated in two different regions of the peptide. This result helps to explain the redundancy of the targeting information contained in the presequence for the F1-ATPase beta-subunit.     

NMR structures of the C-terminal segment of surfactant protein B in detergent micelles and hexafluoro-2-propanol

Although the membrane-associated surfactant protein B (SP-B) is an essential component of lung surfactant, which is itself essential for life, the molecular basis for its activity is not understood. SP-B's biophysical functions can be partially mimicked by subfragments of the protein, including the C-terminus. We have used NMR to determine the structure of a C-terminal fragment of human SP-B that includes residues 63-78. Structure determination was performed both in the fluorinated alcohol hexafluoro-2-propanol (HFIP) and in sodium dodecyl sulfate (SDS) micelles. In both solvents, residues 68-78 take on an amphipathic helical structure, in agreement with predictions made by comparison to homologous saposin family proteins. In HFIP, the five N-terminal residues of the peptide are largely unstructured, while in SDS micelles, these residues take on a well-defined compact conformation. Differences in helical residue side chain positioning between the two solvents were also found, with better agreement between the structures for the hydrophobic face than the hydrophilic face. A paramagnetic probe was used to investigate the position of the peptide within the SDS micelles and indicated that the peptide is located at the water interface with the hydrophobic face of the helix oriented inward, the hydrophilic face of the helix oriented outward, and the N-terminal residues even farther from the micelle center than those on the hydrophilic face of the alpha-helix. Interactions of basic residues of SP-B with anionic lipid headgroups are known to have an impact on function, and these studies demonstrate structural ramifications of such interactions via the differences observed between the peptide structures determined in HFIP and SDS.     

Structure and activity of the N-terminal region of the eukaryotic cytolysin equinatoxin II

The actinoporins are a family of proteins from sea anemones that lyse cells by forming pores in cell membranes. Sphingomyelin plays an important role in their lytic activity, with membranes lacking this lipid being resistant to these toxins. Pore formation by the actinoporin equinatoxin II (EqTII) proceeds by membrane binding via a surface rich in aromatic residues, followed by translocation of the N-terminal region to the membrane and, finally, across the bilayer to form a functional pore. A key feature of this mechanism is the ability of the N-terminal region to form a stable, bilayer-spanning helix in the membrane, which in turn requires dissociation of the N-terminus from the bulk of the protein and significant extension of the N-terminal helix of native EqTII. In this study the structures of three peptides corresponding to residues 11-29, 11-32, and 1-32, respectively, of EqTII have been investigated by high-resolution nuclear magnetic resonance and Fourier transform infrared spectroscopy. The 32-residue peptide lacks ordered secondary structure in water, but residues 6-28 form a helix in dodecylphosphocholine micelles. Although this helix is long enough to span a bilayer membrane, this peptide and the shorter analogues display limited permeabilizing activity in large unilamellar vesicles and very weak hemolytic activity in human red blood cells. Thus, while the N-terminal region has the structural features required for this unusual mechanism of pore formation, the lack of activity of the isolated N-terminus shows that the bulk of the protein is essential for efficient pore formation by facilitating initial membrane binding, interacting with sphingomyelin, or stabilizing the oligomeric pore.     

T178 deletion impairs intermolecular interaction of the peptide Nramp1(164–191)

Natural resistance associated macrophage protein 1 (Nramp1), an integral membrane protein with 12 predicted transmembrane domains (TMs), is a divalent cation transporter associated with infectious and autoimmune diseases. A naturally occurring mutation G169D within TM4 of Nramp1 leads to the loss of function, suggesting potential importance of TM4 for the biological function of the protein. In this study, we determine the three‐dimensional structure and topology of a synthetic peptide, del(T178), corresponding to Nramp1(164‐191) (basically consisting of the putative TM4 of Nramp1) with Thr178 deletion in TFE and SDS micelles using NMR and CD spectroscopic techniques, and compare the results with those of the wildtype peptide. Similarly to the wildtype peptide, the del(T178) peptide still forms an amphiphilic‐like α‐helical structure in both membrane mimics and is embedded in SDS micelles. Differently, whereas the wild‐type peptide forms a helix bundle with the hydrophilic side facing the interior of the bundle, the del(T178) peptide exists as a monomer in the membrane mimics and the hydrophilic side of the helix is located near the interface of SDS micelles. Moreover, a strongly cooperative protonation occurs between intramolecular Asp residues for the del(T178) peptide in SDS micelles, while the cooperative proton binding between intermolecular Asp residues was observed for the wildtype peptide. The difference in the results of the two peptides suggests that the deletion of Thr178 impairs intermolecular interaction of the peptide. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Determination of the membrane contact residues and solution structure of the helix F/G loop of prostaglandin I2 synthase

From our topological arrangement model of prostaglandin I(2) synthase (PGIS) created by homology modeling and topology studies, we hypothesized that the helix F/G loop of PGIS contains a membrane contact region distinct from the N-terminal membrane anchor domain. To provide direct experimental data we have explored the relationship between the endoplasmic reticulum (ER) membrane and the PGIS F/G loop using a constrained synthetic peptide to mimic PGIS residues 208-230 cyclized on both ends through a disulfide bond with added Cys residues. The solution structure and the residues important for membrane contact of the constrained PGIS F/G loop peptide were investigated by high-resolution 1H two-dimensional nuclear magnetic resonance (2D NMR) experiments and a spin label incorporation technique. Through the combination of 2D NMR experiments in the presence of dodecylphosphocholine (DPC) micelles used to mimic the membrane environment, complete 1H NMR assignments of the F/G loop segment have been obtained and the solution structure of the peptide has been determined. The PGIS F/G loop segment shows a defined helix turn helix conformation, which is similar to the three-dimensional crystallography structure of P450BM3 in the corresponding region. The orientation and the residues contacted with the membrane of the PGIS F/G loop were evaluated from the effect of incorporation of a spin-labeled 12-doxylstearate into the DPC micelles with the peptide. Three residues in the peptide corresponding to the PGIS residues L217 (L11), L222 (L16), and V224 (V18) have been demonstrated to contact the DPC micelles, which implies that the residues are involved in contact with the ER membrane in the native membrane-bound PGIS. These results provided the first experimental evidence to localize the membrane contact residues in the F/G loop region of microsomal P450 and are valuable to further define and understand the membrane topology of PGIS and those of other microsomal P450s in the native membrane environment.     

Triple-resonance multidimensional NMR study of calmodulin complexed with the binding domain of skeletal muscle myosin light-chain kinase: indication of a conformational change in the central helix

Heteronuclear 3D and 4D NMR experiments have been used to obtain 1H, 13C, and 15N backbone chemical shift assignments in Ca(2+)-loaded calmodulin complexed with a 26-residue synthetic peptide (M13) corresponding to the calmodulin-binding domain (residues 577-602) of rabbit skeletal muscle myosin light-chain kinase. Comparison of the chemical shift values with those observed in peptide-free calmodulin [Ikura, M., Kay, L. E., & Bax, A. (1990) Biochemistry 29, 4659-4667] shows that binding of M13 peptide induces substantial chemical shift changes that are not localized in one particular region of the protein. The largest changes are found in the first helix of the Ca(2+)-binding site I (E11-E14), the N-terminal portion of the central helix (M72-D78), and the second helix of the Ca(2+)-binding site IV (F141-M145). Analysis of backbone NOE connectivities indicates a change from alpha-helical to an extended conformation for residues 75-77 upon complexation with M13. This conformational change is supported by upfield changes in the C alpha and carbonyl chemical shifts of these residues relative to M13-free calmodulin and by hydrogen-exchange experiments that indicate that the amide protons of residues 75-82 are in fast exchange (kexch greater than 10 s-1 at pH 7, 35 degrees C) with the solvent. No changes in secondary structure are observed for the first helix of site I or the C-terminal helix of site IV. Upon complexation with M13, a significant decrease in the amide exchange rate is observed for residues T110, L112, G113, and E114 at the end of the second helix of site III.     

Novel lactoferrampin antimicrobial peptides derived from human lactoferrin

Human lactoferrampin is a novel antimicrobial peptide found in the cationic N-terminal lobe of the iron-binding human lactoferrin protein. The amino acid sequence that directly corresponds to the previously characterized bovine lactoferrin-derived lactoferrampin peptide is inactive on its own (WNLLRQAQEKFGKDKSP, residues 269-285). However, by increasing the net positive charge near the C-terminal end of human lactoferrampin, a significant increase in its antibacterial and Candidacidal activity was obtained. Conversely, the addition of an N-terminal helix cap (sequence DAI) did not have any appreciable effect on the antibacterial or antifungal activity of human lactoferrampin peptides, even though it markedly influenced that of bovine lactoferrampin. The solution structure of five human lactoferrampin variants was determined in SDS micelles and all of the structures display a well-defined amphipathic N-terminal helix and a flexible cationic C-terminus. Differential scanning calorimetry studies indicate that this peptide is capable of inserting into the hydrophobic core of a membrane, while fluorescence spectroscopy results suggest that a hydrophobic patch encompassing the single Trp and Phe residues as well as Leu, Ile and Ala side chains mediates the interaction between the peptide and the hydrophobic core of a phospholipid bilayer.     

The C-terminal t peptide of acetylcholinesterase forms an alpha helix that supports homomeric and heteromeric interactions.

Acetylcholinesterase subunits of type T (AChET) possess an alternatively spliced C-terminal peptide (t peptide) which endows them with amphiphilic properties, the capacity to form various homo-oligomers and to associate, as a tetramer, with anchoring proteins containing a proline rich attachment domain (PRAD). The t peptide contains seven conserved aromatic residues. By spectroscopic analyses of the synthetic peptides covering part or all of the t peptide of Torpedo AChET, we show that the region containing the aromatic residues adopts an alpha helical structure, which is favored in the presence of lipids and detergent micelles: these residues therefore form a hydrophobic cluster in a sector of the helix. We also analyzed the formation of disulfide bonds between two different AChET subunits, and between AChET subunits and a PRAD-containing protein [the N-terminal fragment of the ColQ protein (QN)] possessing two cysteines upstream or downstream of the PRAD. This shows that, in the complex formed by four T subunits with QN (T4-QN), the t peptides are not folded on themselves as hairpins but instead are all oriented in the same direction, antiparallel to that of the PRAD. The formation of disulfide bonds between various pairs of cysteines, introduced by mutagenesis at various positions in the t peptides, indicates that this complex possesses a surprising flexibility.     

Micelle-bound conformation of a hairpin-forming peptide: combined NMR and molecular dynamics study

A peptide fragment from a protein hairpin turn region was modified by addition of isoleucine residues to both ends to enhance binding to lipid micelles; the resulting peptide (I(1)-I(2)-C(3)-N(4)-N(5)-P(6)-H(7)-I(8)-I(9)) contains the core sequence I-C-N-N-P-H from an antibody-binding region of hemagglutinin A. Nuclear magnetic resonance (NMR) diffusion measurements indicated partial binding (43-65%) of the peptide to micelles of n-octylglucoside and significantly stronger binding (85%) to dodecylphosphocholine (DPC) micelles. Simulated annealing and conformational analysis using nuclear Overhauser enhancement restraints revealed a type I or III hairpin turn between residues N(5) and I(8) of the DPC-bound peptide. Amide exchange experiments support the possibility that a hydrogen bond forms between N(5) and I(8), stabilizing the turn. In contrast, no discernable structure was observed for the peptide in aqueous solution by either NMR or circular dichroism. Molecular dynamics simulations of DPC micelles and peptide-micelle complexes suggested that the peptide lies flat on the micelle surface and showed rapid rearrangement of the lipids to accommodate the bound peptide. According to a search performed using the basic local alignment search tool (BLAST), the sequences N-P-H-I and N-P-H-V are present as hairpin turns in eight of the nine proteins whose crystal structures were available. The addition of isoleucine residues and the use of lipid micelles to stabilize hairpin conformations equivalent to those found in proteins generates new possibilities for reproducing biologically important hairpin turns from short, linear peptides.     

NMR structural studies of the myristoylated N-terminus of ADP ribosylation factor 6 (Arf6)

Arf proteins are guanine nucleotide binding proteins that are implicated in endocytotic pathways and vesicle trafficking. The two widely studied isoforms of Arf proteins (Arf1 and Arf6) have different cellular functions and localizations but similar structures. Arf proteins have an N-terminal helix with a covalently bound myristoyl group. Except structural models, there are no three dimensional structures of the myristoylated N-terminal peptide or the intact myristoylated Arf proteins. However, understanding the role of both the myristoyl group and the N-terminal helix based on the details of their molecular structures is of great interest. In the solution structure of myristoylated N-terminal peptide of Arf6 described here, the myristoyl group folds toward the N-terminus to interact with the hydrophobic residues in particular, the phenyl ring. Also, the structure of the dodecylphosphocholine (DPC) micelle-bound of the peptide together with paramagnetic studies showed that the myristoyl group is inserted into the micelle while residues V4-G10 interact with the surface of the micelle. The structural differences between the unbound and micelle-bound myristoylated N-terminal peptide of Arf6 involves the myristoyl group and the side chains of the hydrophobic residues.     

NMR structures and localization of the potential fusion peptides and the pre-transmembrane region of SARS-CoV: Implications in membrane fusion

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) poses a serious public health hazard. The S2 subunit of the S glycoprotein of SARS-CoV carries out fusion between the virus and the host cells. However, the exact mechanism of the cell fusion process is not well understood. Current model suggests that a conformational transition, upon receptor recognition, of the two heptad core regions of S2 may expose the hydrophobic fusogenic peptide or fusion peptide for membrane insertion. Three regions of the S2 subunit have been proposed to be involved in cell–cell fusion. The N-terminal fusion peptide (FP, residues 770–788), an internal fusion peptide (IFP, residues 873–888) and the pre-transmembrane region (PTM, residues 1185–1202) demonstrated interactions with model lipid membranes and potentially involved in the fusion process. Here, we have determined atomic resolution structures of these three peptides in DPC detergent micelles by solution NMR. FP assumes α-helical conformation with significant distortion at the central Gly residues; enabling a close packing among sidechains of aromatic residues including W, Y and F. The 3-D structure of PMT is characterized by a helix–loop–helix with extensive aromatic interactions within the helices. IFP adopts a rather straight α-helical conformation defined by packing among sidechains of aromatic and aliphatic residues. Paramagnetic spin labeled NMR has demonstrated surface localization of PMT whereas FP and IFP inserted into the micelles. Collectively, data presented in this study will aid in understanding fusion mechanism of SARS-CoV.     

A minor beta-structured conformation is the active state of a fusion peptide of vesicular stomatitis virus glycoprotein.

Entry of enveloped animal viruses into their host cells always depends on a step of membrane fusion triggered by conformational changes in viral envelope glycoproteins. Vesicular stomatitis virus (VSV) infection is mediated by virus spike glycoprotein G, which induces membrane fusion at the acidic environment of the endosomal compartment. In a previous work, we identified a specific sequence in the VSV G protein, comprising the residues 145-164, directly involved in membrane interaction and fusion. In the present work we studied the interaction of pep[145-164] with membranes using NMR to solve the structure of the peptide in two membrane-mimetic systems: SDS micelles and liposomes composed of phosphatidylcholine and phosphatidylserine (PC:PS vesicles). The presence of medium-range NOEs showed that the peptide has a tendency to form N- and C-terminal helical segments in the presence of SDS micelles. Analysis of the chemical shift index indicated helix-coil equilibrium for the C-terminal helix under all conditions studied. At pH 7.0, the N-terminal helix also displayed a helix-coil equilibrium when pep[145-164] was free in solution or in the presence of PC:PS. Remarkably, at the fusogenic pH, the region of the N-terminal helix in the presence of SDS or PC:PS presented a third conformational species that was in equilibrium with the helix and random coil. The N-terminal helix content decreases pH and the minor beta-structured conformation becomes more prevalent at the fusogenic pH. These data point to a beta-conformation as the fusogenic active structure-which is in agreement with the X-ray structure, which shows a beta-hairpin for the region corresponding to pep[145-164].     

The nociceptin pharmacophore site for opioid receptor binding derived from the NMR structure and bioactivity relationships

Nociceptin, a 17 amino acid opioid-like peptide that has an inhibitory effect on synaptic transmission in the nervous system, is involved in learning, memory, attention, and emotion and is also implicated in the perception of pain and visual, auditory, and olfactory functions. In this study, we investigated the NMR solution structure of nociceptin in membrane-like environments (trifluoroethanol and SDS micelles) and found it to have a relatively stable helix conformation from residues 4-17 with functionally important N-terminal residues being folded aperidoically on top of the helix. In functional assays for receptor binding and calcium flux, alanine-scanning variants of nociceptin indicated that functionally important residues generally followed helix periodicity, consistent with the NMR structural model. Structure-activity relationships allowed identification of pharmacophore sites that were used in small molecule data base searches, affording hits with demonstrated nociceptin receptor binding affinities.     

Molecular dynamics simulations predict a tilted orientation for the helical region of dynorphin A(1-17) in dimyristoylphosphatidylcholine bilayers

The structural properties of the endogenous opioid peptide dynorphin A(1-17) (DynA), a potential analgesic, were studied with molecular dynamics simulations in dimyristoylphosphatidylcholine bilayers. Starting with the known NMR structure of the peptide in dodecylphosphocholine micelles, the N-terminal helical segment of DynA (encompassing residues 1-10) was initially inserted in the bilayer in a perpendicular orientation with respect to the membrane plane. Parallel simulations were carried out from two starting structures, systems A and B, that differ by 4 A in the vertical positioning of the peptide helix. The complex consisted of approximately 26,400 atoms (dynorphin + 86 lipids + approximately 5300 waters). After >2 ns of simulation, which included >1 ns of equilibration, the orientation of the helical segment of DynA had undergone a transition from parallel to tilted with respect to the bilayer normal in both the A and B systems. When the helix axis achieved a approximately 50 degrees angle with the bilayer normal, it remained stable for the next 1 ns of simulation. The two simulations with different starting points converged to the same final structure, with the helix inserted in the bilayer throughout the simulations. Analysis shows that the tilted orientation adopted by the N-terminal helix is due to specific interactions of residues in the DynA sequence with phospholipid headgroups, water, and the hydrocarbon chains. Key elements are the "snorkel model"-type interactions of arginine side chains, the stabilization of the N-terminal hydrophobic sequence in the lipid environment, and the specific interactions of the first residue, Tyr. Water penetration within the bilayer is facilitated by the immersed DynA, but it is not uniform around the surface of the helix. Many water molecules surround the arginine side chains, while water penetration near the helical surface formed by hydrophobic residues is negligible. A mechanism of receptor interaction is proposed for DynA, involving the tilted orientation observed from these simulations of the peptide in the lipid bilayer.     

Secondary structure and position of the cell-penetrating peptide transportan in SDS micelles as determined by NMR

Transportan is a 27-residue peptide (GWTLN SAGYL LGKIN LKALA ALAKK IL-amide) which has the ability to penetrate into living cells carrying a hydrophilic load. Transportan is a chimeric peptide constructed from the 12 N-terminal residues of galanin in the N-terminus with the 14-residue sequence of mastoparan in the C-terminus and a connecting lysine. Circular dichroism studies of transportan and mastoparan show that both peptides have close to random coil secondary structure in water. Sodium dodecyl sulfate (SDS) micelles induce 60% helix in transportan and 75% helix in mastoparan. The 600 MHz (1)H NMR studies of secondary structure in SDS micelles confirm the helix in mastoparan and show that in transportan the helix is localized to the mastoparan part. The less structured N-terminus of transportan has a secondary structure similar to that of the same sequence in galanin [Ohman, A., et al. (1998) Biochemistry 37, 9169-9178]. The position of mastoparan and transportan relative to the SDS micelle surface was studied by adding spin-labeled 5-doxyl- or 12-doxyl-stearic acid or Mn2+ to the peptide/micelle system. The combined results show that the peptides are for the most part buried in the SDS micelles. Only the C-terminal parts of both peptides and the central segment connecting the two parts of transportan are clearly surface exposed. For mastoparan, the secondary chemical shifts of the amide protons were found to vary periodically and display a pattern almost identical to those reported for mastoparan in phospholipid bicelles [Vold, R., et al. (1997) J. Biomol. NMR 9, 329-335], indicating similar structures and interactions in the two membrane-mimicking environments.     

Structure of the pore-helix of the hERG K<Superscript>+</Superscript> channel

The hERG K⁺ channel undergoes rapid inactivation that is mediated by ‘collapse’ of the selectivity filter, thereby preventing ion conduction. Previous studies have suggested that the pore-helix of hERG may be up to seven residues longer than that predicted by homology with channels with known crystal structures. In the present work, we determined structural features of a peptide from the pore loop region of hERG (residues 600–642) in both sodium dodecyl sulfate (SDS) and dodecyl phosphocholine (DPC) micelles using NMR spectroscopy. A complete structure calculation was done for the peptide in DPC, and the localization of residues inside the micelles were analysed by using a water-soluble paramagnetic reagent with both DPC and SDS micelles. The pore-helix in the hERG peptide was only two–four residues longer at the N-terminus, compared with the pore helices seen in the crystal structures of other K⁺ channels, rather than the seven residues suggested from previous NMR studies. The helix in the peptide spanned the same residues in both micellar environments despite a difference in the localization inside the respective micelles. To determine if the extension of the length of the helix was affected by the hydrophobic environment in the two types of micelles, we compared NMR and X-ray crystallography results from a homologous peptide from the voltage gated potassium channel, KcsA.     

A model of reversible inhibitors in the gastric H+/K+-ATPase binding site determined by rotational echo double resonance NMR

Several close analogues of the noncovalent H(+)/K(+)-ATPase inhibitor SCH28080 (2-methyl-3-cyanomethyl-8-(phenylmethoxy)imidazo[1,2-a]pyridine) have been screened for activity and examined in the pharmacological site of action by solid-state NMR spectroscopy. TMPIP, the 1,2,3-trimethyl analogue of SCH28080, and variants of TMPIP containing fluorine in the phenylmethoxy ring exhibited IC(50) values for porcine H(+)/K(+)-ATPase inhibition falling in the sub-10 microm range. Deuterium NMR spectra of a (2)H-labeled inhibitor titrated into H(+)/K(+)-ATPase membranes revealed that 80-100% of inhibitor was bound to the protein, and K(+)-competition (2)H NMR experiments confirmed that the inhibitor lay within the active site. The active binding conformation of the pentafluorophenylmethoxy analogue of TMPIP was determined from (13)C-(19)F dipolar coupling measurements using the cross-polarization magic angle spinning NMR method, REDOR. It was found that the inhibitor adopts an energetically favorable extended conformation falling between fully planar and partially bowed extremes. These findings allowed a model to be proposed for the binding of this inhibitor to H(+)/K(+)-ATPase based on the results of independent site-directed mutagenesis studies. In the model, the partially bowed inhibitor interacts with Phe(126) close to the N-terminal membrane spanning helix M1 and residues in the extracellular loop bridging membrane helices M5 and M6 and is flanked by residues in M4.