Physical analysis and mapping of the Mycoplasma pneumoniae chromosome.

Field inversion gel electrophoresis was used for analysis of the chromosome of Mycoplasma pneumoniae. The restriction endonuclease SfiI (5'-GGCCNNNNNGGCC-3') generated 2 M. pneumoniae DNA fragments of approximately 437 and 357.5 kilobase pairs (kbp), whereas 13 restriction fragments ranging in size from 2.4 to 252.0 kbp resulted from digestion with ApaI (5'-GGGCCC-3'). Totaling the sizes of the individual restriction fragments from digestion with SfiI or ApaI yielded a genome size of 794.5 or 775.4 kbp, respectively. A physical map of the M. pneumoniae chromosome was constructed by using a combination of techniques that included analysis by sequential or partial restriction endonuclease digestions and use as hybridization probes of cloned M. pneumoniae DNA containing ApaI sites and hence overlapping adjacent ApaI fragments. Genetic loci for deoC, rrn, hmw3, and the P1 gene were identified by using cloned DNA to probe ApaI restriction fragment profiles.     

Expression in Mycoplasma pneumoniae of the recombinant gene encoding the cytadherence-associated protein HMW1 and identification of HMW4 as a product

Mycoplasma pneumoniae is a major cause of tracheobronchitis and pneumonia in older children and young adults. The lack of adequate tools for genetic analysis has hindered the elucidation of function and regulation of mycoplasma virulence determinants. We describe here the use of a transposon vector to deliver the cloned gene for the cytadherence-associated protein HMW1 in M. pneumoniae . A 4.95 kbp Bam HI fragment encoding all but the C-terminal end of HMW1 was cloned into a modified Tn 4001 and transformed into wild-type M. pneumoniae and into a non-cytadhering mutant lacking HMW1–HMW5. Southern blot hybridizations confirmed insertion of the transposon and the presence of both the resident and recombinant hmw1 alleles. Analysis by Western immunoblotting revealed a truncated HMW1 (HMW1') in the transformants, the level of HMW1' being dependent upon the orientation of the hmw1 gene in the transposon and the site of insertion. Similar expression patterns were noted in wild-type and mutant backgrounds. However, expression of wild-type levels of HMW1' in the mutant did not restore adherence. Finally, HMW4 and HMW1 were shown to be products of the same gene, HMW4 being a heat-modified derivative of HMW1.     

Deletion analysis identifies key functional domains of the cytadherence-associated protein HMW2 of Mycoplasma pneumoniae

Mycoplasma pneumoniae attachment to host cells requires biogenesis of a functional attachment organelle, including proper localization of the adhesion protein P1 to this structure. Mutations in the hmw2 gene result in the inability to cytadhere, failure to localize P1 to the attachment organelle, altered cell morphology and accelerated turnover of the cytadherence-associated proteins HMW1, HMW3 and P65. The hmw2 gene encodes HMW2 (190 kDa) and P28 (28 kDa), the latter apparently the product of internal translation initiation near the 3' end of the hmw2 coding region. Transformation of hmw2 mutant I-2 with recombinant wild-type hmw2 restores a wild-type phenotype. In the current study, a severely truncated hmw2 gene with an in frame internal deletion of 80% of the HMW2 coding region that leaves the P28-encoding region intact restored cytadherence to mutant I-2. Transformants produced the expected 38 kDa HMW2 derivative (HMW2Deltamid) at levels comparable to that of HMW2 in wild-type cells; like HMW2, HMW2Deltamid exhibited marked Triton X-100 insolubility. HMW3, P65 and P28 were fully restored, but not HMW1. These transformants were morphologically similar to wild-type M. pneumoniae but failed to localize P1 to the attachment organelle. Finally, a C-terminally truncated HMW2 derivative was partly Triton X-100 soluble and incapable of restoring HMW1, HMW3 and P65 to wild-type levels. These data are consistent with a model in which the C-terminal domain of HMW2 imparts normal localization to the protein, and this localization itself is required for productive interactions with downstream cytadherence-associated proteins. Furthermore, these results emphasize the association of HMW1 with P1 clustering.     

The rabbit alpha-like globin gene cluster is polymorphic both in the sizes of BamHI fragments and in the numbers of duplicated sets of genes

The alpha-like globin gene cluster in rabbits contains embryonic zeta- globin genes, an adult alpha-globin gene, and theta-globin genes of undetermined function. The basic arrangement of genes, deduced from analysis of cloned DNA fragments, is 5'-zeta 0-zeta 1-alpha 1-theta 1- zeta 2-zeta 3-theta 2-3'. However, the pattern of restriction fragments containing zeta- and theta-globin genes varies among individual rabbits. Analysis of BamHI fragments of genomic DNA from 24 New Zealand white rabbits revealed eight different patterns of fragments containing zeta-globin genes. The large BamHI fragments containing genes zeta 0 and zeta 1 are polymorphic in length, whereas a 1.9-kb fragment containing the zeta 2 gene and the 3.5-kb fragment containing the zeta 3 gene do not vary in size. In contrast to this constancy in the size of the restriction fragments, the copy number of the zeta 2 and zeta 3 genes does vary among different rabbits. No length polymorphism was detected in the BamHI fragments containing the theta-globin genes, but again the copy number varies for restriction fragments containing the theta 2 gene. The alpha 1- and theta 1-globin genes are located in a nonpolymorphic 7.2-kb BamHI fragment. The combined data from hybridization with both zeta and theta probes shows that the BamHI cleavage pattern does not vary within the region 5'-alpha 1-theta 1- zeta 2-zeta 3-theta 2-3', but the pattern genomic blot-hybridization patterns for the progeny of parental rabbits with different zeta-globin gene patterns shows that the polymorphic patterns are inherited in a Mendelian fashion. Two different haplotypes have been mapped based on the genomic blot-hybridization data. The variation in the alpha-like globin gene cluster in the rabbit population results both from differences in the copy number of the duplication block containing the zeta-zeta-theta gene set and from the presence or absence of polymorphic BamHI sites.      

Characterization and structure of an endoglucanase gene cenA of Cellulomonas fimi

Two BamHI fragments (0.8 and 5.2 kb) of Cellulomonas fimi containing an endoglucanase (Eng) gene (cenA) were individually cloned into the BamHI site of pBR322; they expressed carboxymethylcellulase activity in Escherichia coli. The nucleotide (nt) sequence of the cenA gene was determined by sequencing overlapping deletions. The cenA gene is 1350 bp long encoding a polypeptide of 449 amino acids (aa) and stop codon. The 0.8-kb BamHI component encodes the first 76 aa, whereas the 5.2-kb BamHI component encodes the rest of the Eng. The Eng lacking the N-terminal 76 aa retains its activity and antigenicity, and it forms an active fusion protein with the N-terminal portion of the TcR determinant. The C-terminal region of the Eng is crucial for activity and a deletion of as little as 12 aa from that end results in the loss of all Eng activity. The N-terminal 31 aa of the Eng constitute a leader peptide which appears to be functional in exporting the enzyme to the periplasm in E. coli.     

Sequence analysis and characterization of the hmw gene cluster of Mycoplasma pneumoniae

Mycoplasma pneumoniae (Mp) cytadherence requires the proper anchoring of cytadhesin proteins in the mycoplasmal membrane at an attachment organelle through their interaction with a cytoskeleton-like network of accessory proteins that includes HMW1 and HMW3. Approximately 8.25 kb of Mp DNA was sequenced, beginning at the 3' end of the hmw3 gene and continuing through hmwl. Comparison of the resulting deduced amino acid (aa) sequence with N terminus and internal peptide aa sequences from purified HMW1 permitted definitive identification of hmwl. HMW1 was characterized with respect to structure, hydrophobicity, possible phosphoacceptor sites and expression of the Mp recombinant protein in Escherichia coli. In addition, HMW1 membrane topography was examined for antibody accessibility on the mycoplasmal surface. hmw3 and hmwl flank four open reading frames (ORFs) spanning approximately 4.3 kb and in the same orientation as the hmw genes. The sequences of their deduced products were evaluated for likely structural features and comparison with protein data banks. Finally, the Mp rpsD analog was identified immediately downstream from hmwl.     

Comparison of the nucleotide and amino acid sequences of the RsrI and EcoRI restriction endonucleases

The RsrI endonuclease, a type-II restriction endonuclease (ENase) found in Rhodobacter sphaeroides, is an isoschizomer of the EcoRI ENase. A clone containing an 11-kb BamHI fragment was isolated from an R. sphaeroides genomic DNA library by hybridization with synthetic oligodeoxyribonucleotide probes based on the N-terminal amino acid (aa) sequence of RsrI. Extracts of E. coli containing a subclone of the 11-kb fragment display RsrI activity. Nucleotide sequence analysis reveals an 831-bp open reading frame encoding a polypeptide of 277 aa. A 50% identity exists within a 266-aa overlap between the deduced aa sequences of RsrI and EcoRI. Regions of 75-100% aa sequence identity correspond to key structural and functional regions of EcoRI. The type-II ENases have many common properties, and a common origin might have been expected. Nevertheless, this is the first demonstration of aa sequence similarity between ENases produced by different organisms.     

Molecular cloning and physical mapping of the nitrogenase structural genes from the filamentous, non-heterocystous cyanobacterium Pseudanabaena sp. PCC7409

Abstract Sequences homologous to the structural genes for dinitrogenase ( nifD and nifK ) and nitrogenase reductase ( nifH ) have been cloned from the filamentous, non-heterocystous cyanobacterium Pseudanabaena PCC7409. The nifHDK ⁻ homologous sequences were shown to reside on a 6.5-kb Eco RI restriction fragment by using a restriction fragment encoding the Klebsiella pneumoniae nifHDK genes as a heterologous hybridization probe. This 6.5-kb restriction fragment was cloned from a λ gt.wes Eco RI library of the Paseudanabaena sp. PCC7409 genome. This fragment was subcloned into the plasmid vector pUC9 to generate plasmid pPSU20. A detailed physical map of the insert in plasmid pPSU20 was determined, and relative positions of the nifH, nifD , and nifK homologous sequences on this fragment were determined by hybridization analysis with gene-specific fragments derived from the corresponding Anabaena sp. PCC7120 genes. The results indicate that these genes are contiguous in Pseudanabaena sp. PCC 7409 and are arranged in the order nifH, nifD , and nifK . This arrangement resembles that observed for other non-heterocystous cyanobacteria but differs from that observed for Anabaena, Calothrix , and Nostoc species.     

Gene localization, size, and physical map of the chromosome of Streptococcus pneumoniae.

A physical map of the Streptococcus (Diplococcus) pneumoniae chromosome, which is circular and 2,270 kbp in circumference, has been constructed. The restriction enzymes ApaI, SmaI, and SacII were used to digest intact chromosomes, and the fragments were resolved by field inversion gel electrophoresis (FIGE). The digests produced 22, 20, and 29 fragments, respectively. The order of the fragments was deduced from Southern blot hybridization of isolated labeled fragments to separated fragments of the various restriction digests. Genetic markers were correlated with the physical map by transformation of recipient cells with FIGE-isolated DNA fragments derived from genetically marked S. pneumoniae strains. In addition, markers were mapped by the hybridization of cloned genes to FIGE-separated restriction fragments. Six rRNA gene (rrn) clusters were mapped by hybridization to rrn-containing fragments of Haemophilus influenzae.     

A plasmid vector allowing positive selection of recombinant plasmids in Streptococcus pneumoniae

A new plasmid, pSP2, was constructed as a cloning vector for use in Streptococcus pneumoniae. It allows direct selection of recombinant plasmids, even for DNA fragments not homologous to the S. pneumoniae chromosome, as based on the failure to maintain long inverted repeats (LIRs) hyphen-free in bacterial plasmids. Plasmid pSP2 contains a 1.4-kb BamHI fragment ("hyphen") flanked by 1.9-kb LIRs. The removal of the 1.4-kb BamHI fragment followed by ligation creates a plasmid containing a 1.9-kb insert-free LIR; plasmids with such non-hyphenated LIRs were not established when transferred into S. pneumoniae. Replacement of the original 1.4-kb insert by other restriction fragments restored plasmid viability. Investigation of plasmid transfer by transformation suggests that intrastrand synapsis between the LIRs could occur, thus facilitating plasmid establishment (a process we call self-facilitation). Such an intrastrand synapsis could also account for rare occurrences of insert-inversion noticed upon transfer as well as for the formation of palindrome-deleted derivatives at low frequency. Plasmid pSP2 carries two selectable genes, tet and ermC, and can be used for cloning of fragments produced by a variety of restriction enzymes (BamHI, Bg/II, Bc/I or Sau3A, and Sa/I or XhoI).     

Cloning and analysis of s-triazine catabolic genes from Pseudomonas sp. strain NRRLB-12227.

Pseudomonas sp. strain NRRLB-12227 degrades the s-triazine melamine by a six-step pathway which allows it to use melamine and pathway intermediates as nitrogen sources. With the plasmid pLG221, mutants defective in five of the six steps of the pathway were generated. Tn5-containing-EcoRI fragments from these mutants were cloned and identified by selection for Tn5-encoded kanamycin resistance in transformants. A restriction fragment from ammelide-negative mutant RE411 was used as a probe in colony hybridization experiments to identify cloned wild-type s-triazine catabolic genes encoding ammeline aminohydrolase, ammelide aminohydrolase, and cyanuric acid amidohydrolase. These genes were cloned from total cellular DNA on several similar, but not identical, HindIII fragments, as well as on a PstI fragment and a BglII fragment. Restriction mapping and Southern hybridization analyses of these cloned DNA fragments suggested that these s-triazine catabolic genes may be located on a transposable element, the ends of which are identical 2.2-kb insertion sequences.     

The P200 protein of Mycoplasma pneumoniae shows common features with the cytadherence-associated proteins HMW1 and HMW3

The gene coding for the P200 protein of the bacterium, Mycoplasma pneumoniae (Mp), was cloned and sequenced. The sequence-derived data and biochemical data indicated that P200 has several features in common with the well characterized cytadherence-associated proteins, HMW1 and HMW3. These features consist of abnormal migration in SDS-PAGE, a central acidic domain with a high Pro content, repeated peptide blocks within the Pro-rich domain and P200 partitioning similar to HMW1 and HMW3 in the insoluble fraction after extraction of Mp with the detergent Triton X-100.     

Physical and genetic mapping of the genomes of five Mycoplasma hominis strains by pulsed-field gel electrophoresis.

We present the complete maps of five Mycoplasma hominis genomes, including a detailed restriction map and the locations of a number of genetic loci. The restriction fragments were resolved by field inversion gel electrophoresis or by the contour-clamped homogeneous-electric-field system of pulsed-field gel electrophoresis. All the ApaI, SmaI, BamHI, XhoI, and SalI restriction sites (total of 21 to 33 sites in each strain) were placed on the physical map, yielding an average resolution of 26 kb. The maps were constructed using three different approaches: (i) size determination of DNA fragments partially or completely cleaved with one or two restriction enzymes, (ii) hybridization analysis with purified restriction fragments and specific probes, and (iii) use of linking clones. A genetic map was constructed by hybridization with gene-specific probes for rpoA, rpoC, rrn, tuf, gyrB, hup, ftsY, the unc operon, the genes for two M. hominis-specific antigenic membrane proteins, and one gene encoding a protein with some homology to Escherichia coli alanyl-tRNA synthetase. The positions of mapped loci were partially conserved in the five strains except in one strain in which a 300-kb fragment was inverted. The numbers and order of mapped restriction sites were only partly conserved, and this conservation was restricted to certain regions. The gene order was compared with the gene order established for other bacteria and was found to be identical to that of the phylogenetically related Clostridium perfringens. The genome size of the M. hominis strains varied from 704 to 825 kb.     

Restriction endonuclease mapping of the HI2 incompatibility group plasmid R478.

A restriction map of the 272-kb IncHI2 plasmid R478 was constructed by using the enzymes ApaI, XbaI, SalI, and XhoI. The map was derived from cloned restriction fragments from R478 inserted into cosmid and plasmid vectors as well as from double-digestion analysis of R478 and R478 miniplasmids. All previously known resistance determinants were cloned from R478, and their positions were located on the restriction map. A region involved in incompatibility was cloned and mapped. The location of a previously unreported arsenite resistance gene was also determined. The genes encoding tellurite resistance, colicin B resistance, and phage inhibition were found to be associated with a 6.7-kb SalI fragment of R478.     

Localization of the Mycoplasma pneumoniae cytadherence-accessory proteins HMW1 and HMW4 in the cytoskeletonlike Triton shell.

The location of the cytadherence-accessory high-molecular weight proteins 1 and 4 (HMW1/4) within Mycoplasma pneumoniae cells has been studied by both biochemical and electron microscopic techniques. Peptide mapping studies demonstrated that HMW1/4 share almost identical peptide profiles, suggesting that the two proteins are structurally related. Examination of thin sections of M. pneumoniae with antibodies to HMW1/4 and colloidal gold particles revealed distinct labeling of the filamentous extensions of the mycoplasma cells. Labeling was absent on thin sections of a cytadherence-deficient variant lacking HMW1/4. HMW1/4 partitioned in the detergent-insoluble fraction following Triton X-100 extraction, and analysis by sucrose density gradient centrifugation suggested that HMW1/4 are part of a high-molecular-weight, multiprotein complex. These results were confirmed by immunogold labeling of Triton X-100-extracted M. pneumoniae cells incubated with antibodies to HMW1/4: gold particles bound in specific clusters to detergent-insoluble filaments. Finally, immunogold labeling of whole cells revealed that HMW1/4 are exposed on the cell surface, although to a lesser degree than on the cell interior. These findings indicate that HMW1/4 are membrane proteins associated with the cytoskeletonlike triton shell of M. pneumoniae and localized primarily in the filamentous extensions of the mycoplasma cells.     

Characterization of two HMW glutenin subunit genes from Taenitherum Nevski

The compositions of high molecular weight (HMW) glutenin subunits from three species of Taenitherum Nevski (TaTa, 2n = 2x = 14), Ta. caput-medusae, Ta. crinitum and Ta. asperum, were investigated by SDS-PAGE analysis. The electrophoresis mobility of the x-type HMW glutenin subunits were slower or equal to that of wheat HMW glutenin subunit Dx2, and the electrophoresis mobility of the y-type subunits were faster than that of wheat HMW glutenin subunit Dy12. Two HMW glutenin genes, designated as Tax and Tay, were isolated from Ta. crinitum, and their complete nucleotide coding sequences were determined. Sequencing and multiple sequences alignment suggested that the HMW glutenin subunits derived from Ta. crinitum had the similar structures to the HMW glutenin subunits from wheat and related species with a signal peptide, and N- and C-conservative domains flanking by a repetitive domain consisted of the repeated short peptide motifs. However, the encoding sequences of Tax and Tay had some novel modification compared with the HMW glutenin genes reported so far: (1) A short peptide with the consensus sequences of KGGSFYP, which was observed in the N-terminal of all known HMW glutenin genes, was absent in Tax; (2) There is a specified short peptide tandem of tripeptide, hexapeptide and nonapeptide and three tandem of tripeptide in the repetitive domain of Tax; (3) The amino acid residues number is 105 (an extra Q presented) but not 104 in the N-terminal of Tay, which was similar to most of y-type HMW glutenin genes from Elytrigia elongata and Crithopsis delileana. Phylogenetic analysis indicated that Tax subunit was mostly related to Ax1, Cx, Ux and Dx5, and Tay was more related to Ay, Cy and Ry.     

Cellulase and hemicellulase genes of Clostridium thermocellum from five independent collections contain few overlaps and are widely scattered across the chromosome

Five independent collections, comprising a total of 34 clones encoding cellulases, hemicellulases and cell surface proteins of Clostridium thermocellum, were searched for overlapping or contiguous DNA fragments. The clones were hybridized to large genomic restriction fragments separated by pulse-field electrophoresis. Clones hybridizing to the same fragment were further compared by hybridization to smaller fragments, by cross-hybridization and by restriction mapping. The probes hybridized to loci which were usually not clustered and were scattered over at least one third of the chromosome. Besides previously identified clusters, only two clones were found to be adjacent. Two pairs of clones appeared to contain the same genes cloned in duplicate, and one of the genes was shown to be cloned in triplicate.