Two-step hard acid deprotection/cleavage procedure for solid phase peptide synthesis

A new two-step deprotection/cleavage procedure for t-butoxycarbonyl (Boc) based solid phase peptide synthesis is reported. First the protective groups are removed from 4-(oxymethyl)-phenylacetamidomethyl (PAM) resin attached peptide with the weak hard acid, trimethylsilyl bromide-thioanisole/trifluoroacetic acid (TFA). In the second step, the peptide is cleaved from the resin with a stronger hard acid such as trimethylsilyl trifluoromethanesulfonate in TFA or with HF. The method is also shown to deformylate Nin-formyltryptophan moiety efficiently. The usefulness of this procedure for practical solid phase peptide synthesis is demonstrated by comparison with other deprotection methods in the synthesis of urotensin II and human endothelin.     

Solid phase synthesis of gastrin I. Comparison of methods utilizing strong acid for deprotection and cleavage

A successful synthesis of human gastrin I in 60% overall yield based on the first residue attached to a benzhydrylamine-resin was achieved by the stepwise solidphase method. The synthesis was carried out on a 1% crosslinked polystyrene support, using conventional benzyl-based side chain protecting groups and final deprotection with different acidic protocols. Several improvements in this general approach were applied, including new scavengers, new resin attachment and especially a new technique that allows the strong acid reactions to occur by an SN2 mechanism.     

Solid phase synthesis of peptides containing the CH2NH peptide bond isostere

The CH2NH peptide bond can be directly introduced by the reductive alkylation reaction between a tert-butoxycarbonyl-amino acid aldehyde and an amine on the resin bound peptide employing sodium cyanoborohydride in acidified dimethylformamide solution and this facile method was successfully applied to the synthesis of a psi[CH2NH] pseudopeptide somatostatin octapeptide analogue.     

Generation of a cysteine sulfinic acid analog for incorporation in peptides using solid phase peptide synthesis

The sulfinic acid analog of aspartic acid, cysteine sulfinic acid, introduces a sulfur atom that perturbs the acidity and oxidation properties of aspartic acid. Cysteine sulfinic acids are often introduced in peptides and proteins by oxidation of cysteine, but this method is limited as all cysteine residues are oxidized and cysteine residues are often oxidized to sulfonic acids. To provide the foundation for the specific incorporation of cysteine sulfinic acids in peptides and proteins, we synthesized a 9-fluorenylmethyloxycarbonyl (Fmoc) benzothiazole sulfone analog. Oxidation conditions to generate the sulfone were examined and oxidation of the Fmoc-protected sulfide (3) with NbC in hydrogen peroxide provided the corresponding sulfone (4) in the highest yield and purity. Reduction with sodium borohydride generated the cysteine sulfinic acid (5) suggesting this approach may be an efficient method to incorporate a cysteine sulfinic acid in biomolecules. A model tripeptide bearing a cysteine sulfinic acid was synthesized using this approach. Future studies are aimed at using this method to incorporate cysteine sulfinic acids in peptide hormones and proteins for use in the study of biological function.     

Solid phase peptide synthesis on epoxy-bearing methacrylate monoliths.

Monoliths based on a copolymer of glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) can be used directly as sorbents for affinity chromatography after solid phase peptide synthesis. The quality of the synthesized products, the amount of grown peptides on a support and the reproducibility of the process must be considered. A determination of the quantity of the introducing beta-Ala (and, consequently, the total amount of synthesized peptide) was carried out. Three peptides complementary to recombinant tissue plasminogen activator (t-PA) have been synthesized using Fmoc-chemistry on GMA-EDMA disks. The peptidyl ligands were analysed by amino acid analysis, ES-MS and HPLC methods. The affinity binding parameters were obtained from frontal elution data. The results were compared with those established for GMA-EDMA affinity sorbents formed by the immobilization of the same but separately synthesized and purified ligands. The immobilization on GMA-EDMA disks was realized using a one-step reaction between the amino groups of the synthetic ligand and the original epoxy groups of monolithic material. The affinity constants found for two kinds of sorbent did not vary significantly. Finally, the directly obtained affinity sorbents were tested for t-PA separation from a cellular supernatant.     

Microwave-assisted Boc-solid phase peptide synthesis of cyclic cysteine-rich peptides.

In this study we describe the first protocols for the synthesis of cystine-rich peptides in the presence of microwave radiation with Boc-solid phase peptide synthesis (SPPS). This method is exemplified for macrocyclic peptides known as cyclotides, which comprise approximately 30 amino acids and incorporate a cystine knot arrangement of their three disulfide bonds. However, the method is broadly applicable for a wide range of peptides using Boc-SPPS, especially for SPPS of large peptides via native chemical ligation. Microwave radiation produces peptides in high yield and with high purity, and we were able to reduce the time for the assembly of approximately 30 mer peptide chains to an overnight reaction in the automated microwave-assisted synthesis.     

Facile reduction of peptide oxime endothelin antagonist during trialkylsilane/TFA cleavage after solid-phase synthesis

Summary We describe a new solid-phase strategy for the selective reduction of the C=N bond in peptide oximes using a trialkylsilane in trifluoroacetic acid. The reduction is performed directly on the resin-bound peptide, with concomitant cleavage of the peptide from the resin and deblocking of protected side chains.     

Solid phase peptide synthesis on hydrophilic supports. Part II--Studies using Perloza beaded cellulose.

Beaded cellulose (Perloza) was modified with acrylonitrile followed by reduction with diborane to give a functionalised support containing aminopropyl groups. This spacer arm was then further extended with a glycolamido or an Fmoc-amino acid-4-oxymethylphenoxyacetyl moiety. A number of peptides, including the Merrifield test peptide leucyl-alanyl-glycyl-valine, leucine-enkephalin, Acyl Carrier Protein (65-74), angiotensin I and II, ACTH(4-11) and LHRH were synthesised on the aminopropyl beaded cellulose support using modified t-butyloxycarbonyl (Boc) or fluorenylmethoxycarbonyl (Fmoc) synthesis protocols. The peptides were cleaved from the support and further purified.     

Solid-phase tuftsin (Thr-Lys-Pro-Arg) synthesis: deprotection and resin cleavage with trifluoromethane sulfonic acid.

A method is described for the synthesis of the naturally occurring tetrapeptide tuftsin (Thr-Lys-Pro-Arg). This stimulates phagocytosis of granulocytes and macrophages. Trifluoromethanesulfonic acid is used to cleave the tetrapeptide from its supporting resin in solid-phase synthesis. This reagent also causes deprotection of several protecting groups in bifunctional residues. The most significant is the complete removal of the tosyl group from N^G-tosyl-arginine-resin ester.     

Solid phase synthesis of hydrophobic difficult sequence peptides on BDDMA-PS support.

This article illustrates the successful and efficient solid phase assembly of hydrophobic difficult sequence peptides following both t-Boc and Fmoc chemistry. The peptides were synthesized on an optimized 1,4-butanediol dimethacrylate-crosslinked polystyrene support (BDDMA-PS). Four difficult sequence test peptides, VAVAG, VIVIG, QVGQVELG and VQAAIDYING, were synthesized in relatively good yield and purity without any aggregation problems. The peptides were assembled on chloromethylated and 4-hydroxymethylphenoxymethyl (HMP) BDDMA-PS resins. The peptides were fabricated using Boc amino acid 1-hydroxybenzotriazolyl and Fmoc amino acid pentafluorophenyl active esters in coupling reactions. The peptides after synthesis were cleaved from the polymeric support by exposing the peptidyl resin to 90% trifluroacetic acid/5% thioanisole/5% EDT mixture. The HPLC and MALDI TOF MS studies of the peptides revealed the high homogeneity of the synthesized peptides. Chloromethylated resin having a functional group loading of 1.14 mmol Cl/g was used for the synthesis. The yield and homogeneity of these peptides synthesized using the new support were high when compared with the conventional DVB-PS resin.     

Conductance measurements in solid phase peptide synthesis. I. Monitoring coupling and deprotection in Fmoc chemistry

Potentiated conductance shows promise for monitoring the progress of both coupling and deprotection reactions in solid phase peptide synthesis using Fmoc chemistry. Sterically hindered base may be added to the aprotic polar solvents used for synthesis, this induces ionisation of acids formed in the coupling and deprotection reactions, thus giving rise to a conductance signal in the solvent. Changes in this signal allow reactions occurring at the resin to be followed with no degradation of coupling efficiency.     

Solid phase synthesis of selective caspase-3 peptide inhibitors

A robust method for the solid phase synthesis of a series of selective caspase-3 peptide inhibitors is described. The inhibitors can be obtained after cleavage from the solid support without further purification.     

Solid phase peptide synthesis of alpha-factor, a yeast mating pheromone.

Based on analysis of highly purified preparations of natural $\text{α}$-factor and on the sequence recently reported by others, oligopeptides of the following structures were chemically synthesized by the solid phase method of Merrifield: N-Trp-His-Trp-Leu-Lys-Pro-Gly-G1N-Pro-Met-Tyr-C N-His-Trp-Leu-Lys-Pro-Gly-G1N-Pro-Met-Tyr-C Both synthetic species arrested $\text{a}$ cells in G1, inhibited their DNA synthesis, caused them to elongate markedly, and induced an increase in their adhesivity toward $\text{α}$ cells. Neither synthetic material caused any of these effects in $\text{α}$ cells or in $\text{a}\text{α}$ diploids.     

Solid phase synthesis of peptidyl aldehydes from C-terminal thiazolidinyl peptides

Peptidyl aldehydes are potent transition stateanalogue inhibitors of cysteine and serineproteinases. The aldehyde function has recently beenused for chemoselective peptide ligation. Thepreparation of peptidyl aldehydes on a solid supportrequires that the aldehyde be masked during peptideelongation and generated in a final step under mildconditions. We report here the preparation of peptidylaldehydes by copper salt-mediated neutral hydrolysisof the corresponding C-terminal thiazolidinyl peptideswhich were elongated on a solid support.     

Solid phase synthesis of peptidyl aldehydes from C-terminal thiazolidinyl peptides

Summary Peptidyl aldehydes are potent transition state analogue inhibitors of cysteine and serine proteinases. The aldehyde function has recently been used for chemoselective peptide ligation. The preparation of peptidyl aldehydes on a solid support requires that the aldehyde be masked during peptide elongation and generated in a final step under mild conditions. We report here the preparation of peptidyl aldehydes by copper salt-mediated neutral hydrolysis of the corresponding C-terminal thiazolidinyl peptides which were elongated on a solid support.     

Solid phase synthesis of acylglycine human metabolites

Acylglycines represents a large and important class of human metabolites. They are often used in medicine to identify fatty acid oxidation disorders. A highly efficient solid phase synthesis approach to obtain these clinically important compounds is developed via coupling reaction between glycine-preloaded Wang resin and a set of carboxylic acids. The developed methodology facilitates the preparation of several structurally-diverse acylglycines with high yields and purity.     

Fmoc-amino acid chlorides in solid phase synthesis of opioid peptides.

Fmoc-amino acid chlorides were employed in the solid phase synthesis of the opioid peptides [Leu]enkephalin, [Leu]enkephalin amide, and dermorphin. The conventional polystyrene-based Merrifield resin or Wang's resin served as solid support. A binary salt of either triethylamine or diisopropylethylamine in the presence of 1-hydroxybenzotriazole or pivalic acid was used for acylation. The coupling rates were quite fast, being comparatively faster when 1-hydroxybenzotriazole was used along with triethylamine or diisopropylethylamine. The peptides obtained in good yields showed, after purification, biological and spectral properties identical with those of the natural peptides.     

Solid phase synthesis of hydrophobic peptides on 1,6-hexanediol diacrylate cross-linked polystyrene resin.

The synthesis of three hydrophobic peptides, which are partial sequences of thioredoxin, on a newly developed, flexible 1,6-hexanediol diacrylate cross-linked polystyrene, in good yield and purity, is described.     

Solid phase synthesis of anthraquinone peptides and their evaluation as topoisomerase I inhibitors.

Anthraquinone peptide derivatives have previously been shown to inhibit the enzyme topoisomerase I (topo I), a pharmaceutical target for the prevention of malignant carcinomas. A highly efficient procedure for the attachment of the anthraquinone moiety to the N-terminus of a peptide on a solid support is reported. This methodology provides a convenient method for the synthesis of labelled peptides, with potential applications for chemotherapy, DNA detection and protein purification. As the synthetic strategy utilizes the solid phase, it should also be amenable to the generation of combinatorial libraries. The utility of the method by synthesizing a pool of peptides and assaying for topo I inhibition is demonstrated.     

Solid phase synthesis and characterization of two canine gut gastrin-releasing peptides

Two canine gastrin-releasing peptides originally isolated from gut tissue extracts have been synthesized by solid phase methodology and purified by preparative reverse phase high performance liquid chromatography (RP-HPLC). The synthetic gastrin-releasing peptides GRP1-27 and GRP 5-27 were characterized with regard to homogeneity and composition using nine different RP-HPLC systems, mass spectroscopy, amino acid analysis, Edman degradation, methionine oxidation, and peptide mapping with tryptic, Staph. aureus V8 protease and cyanogen bromide cleavage (the latter two systems performed only with GRP 1-27). Although a scarcity of the natural products prevented quantitative biological comparison of the synthetic and natural peptides, they were found to elute identically on RP-HPLC co-chromatography and similar dose dependent biological potencies were observed in canine antral muscle tissue contraction experiments. Indeed, all the peptides containing the bombesin-like carboxyl terminal decapeptide sequence studied to date have similar biological activities.