Synapsis of Tn3 recombination sites: unpaired sites destabilize synapses by a partner exchange mechanism

Catalysis of site-specific recombination is preceded by the formation of a synapse comprising two DNA sites and multiple subunits of the recombinase, together with other "accessory" proteins in some cases. We investigated the stability of synapses of Tn3 resolvase-bound res recombination sites, in plasmids containing either two or three res sites. Although synapses are long-lived in plasmids with just two res sites, persisting for tens of minutes, a synapse of any two sites is relatively short-lived in plasmids with three res sites. The three alternative pairwise synapses that can be formed in three-res plasmids re-assort rapidly relative to the rate of recombination. We propose a "partner exchange" mechanism for this re-assortment, involving direct attack on a synapse by an unpaired res site. This mechanism reconciles studies on selective synapsis in multi-res substrates, which imply rapid interchange of synaptic pairings, with studies indicating that synapses of two Tn3res sites are stable.     

Kinetics of site-site interactions in supercoiled DNA with bent sequences

A curved DNA segment is known to adopt a preferred end loop localization in superhelical (sc) DNA and thus may organize the overall conformation of the molecule. Through this process it influences the probability of site juxtaposition. We addressed the effect of a curvature on site-site interactions quantitatively by measuring the kinetics of cross-linking of two biotinylated positions in scDNA by streptavidin. The DNA was biotinylated at either symmetric or asymmetric positions with respect to a curved insert via triplex-forming oligonucleotides (TFOs) modified with biotin. We used a quench-flow device to mix the DNA with the protein and scanning force microscopy to quantify the reaction products. As a measure of the interaction probability, rate constants of cross-linking and local concentrations j(M) of one biotinylated site in the vicinity of the other were determined and compared to Monte Carlo simulations for corresponding DNAs. In good agreement with the simulations, a j(M) value of 1.74 microM between two sites 500bp apart was measured for an scDNA without curvature. When a curvature was centered between the sites, the interaction probability increased about twofold over the DNA without curvature, significantly less than expected from the simulations. However, the relative differences of the interaction probabilities due to varied biotin positions with respect to the curvature agreed quantitatively with the theory.     

DNA-loop formation on nucleosomes shown by in situ scanning force microscopy of supercoiled DNA

The flexibility of the chromatin structure, necessary for the processing of the genomic DNA, is controlled by a number of factors where flexibility and mobility of the nucleosomes is essential. Here, the influence of DNA supercoiling on the structure of single nucleosomes is investigated. Circular supercoiled plasmid DNA sub-saturated with histones was visualized by scanning force microscopy (SFM) in aqueous solution. SFM-imaging compared with topological analysis indicates instability of nucleosomes when the salt concentration is raised from 10 mM to 100 mM NaCl. Nucleosomes were observed after the deposition to the used scanning surface, i.e. mica coated with polylysine. On the images, the nucleosomes appear with a high probability in end-loops near the apices of the superhelices. In 100 mM NaCl but not in 10 mM NaCl, a significant number of complexes present the nucleosomes on superhelical crossings mainly located adjacent to an end-loop. The morphology of these structures and statistical analysis suggest that DNA loops were formed on the histone octamers, where the loop size distribution shows a pronounced peak at 50 nm. Recently, the formation and diffusion of loops on octamers has been discussed as a mechanism of translocations of nucleosomes along DNA. The presented data likely confirm the occurrence of loops, which may be stabilized by supercoiling. Analysis of the structure of regular nucleosomes not located on crossings indicates that reducing the salt concentration leads to more conformations, where DNA is partially unwrapped from the distal ends of the octamer.     

Dynamics of DNA loop capture by the SfiI restriction endonuclease on supercoiled and relaxed DNA

The SfiI endonuclease is a prototype for DNA looping. It binds two copies of its recognition sequence and, if Mg(2+) is present, cuts both concertedly. Looping was examined here on supercoiled and relaxed forms of a 5.5 kb plasmid with three SfiI sites: sites 1 and 2 were separated by 0.4 kb, and sites 2 and 3 by 2.0 kb. SfiI converted this plasmid directly to the products cut at all three sites, though DNA species cleaved at one or two sites were formed transiently during a burst phase. The burst revealed three sets of doubly cut products, corresponding to the three possible pairings of sites. The equilibrium distribution between the different loops was evaluated from the burst phases of reactions initiated by adding MgCl(2) to SfiI bound to the plasmid. The short loop was favored over the longer loops, particularly on supercoiled DNA. The relative rates for loop capture were assessed after adding SfiI to solutions containing the plasmid and MgCl(2). On both supercoiled and relaxed DNA, the rate of loop capture across 0.4 kb was only marginally faster than over 2.0 kb or 2.4 kb. The relative strengths and rates of looping were compared to computer simulations of conformational fluctuations in DNA. The simulations concurred broadly with the experimental data, though they predicted that increasing site separations should cause a shallower decline in the equilibrium constants than was observed but a slightly steeper decline in the rates for loop capture. Possible reasons for these discrepancies are discussed.     

Cleavage of supercoiled circular double-stranded DNA induced by a eukaryotic cambialistic superoxide dismutase from Cinnamomum camphora

Superoxide dismutase (SOD, EC 1.15.1.1) that protectsorganisms from O2?– toxicity is a family of transitionmetal-containing enzyme existing in all oxygen-consu-ming living beings [1,2]. SOD catalyzes the dismutationof the toxic superoxide anion O2?– int…     

Separation of genomic DNA, RNA, and open circular plasmid DNA from supercoiled plasmid DNA by combining denaturation, selective renaturation and aqueous two-phase extraction

In the current study we developed a process for the capture of pDNA exploiting the ability of aqueous two-phase systems to differentiate between different forms of DNA. In these systems scpDNA exhibits a near quantitative partitioning in the salt-rich bottom phase. The successive recovery from the salt rich bottom phase is accomplished by a novel membrane step. The polish operation to meet final purity demands is again based on a system exploiting a combination of the denaturation of the nucleic acids present, specific renaturation of scpDNA, and an ATP system able to differentiate between the renatured scpDNA and the denatured contaminants such as ocpDNA and genomic host DNA. This polish step thus allows a rapid and efficient separation of scpDNA from contaminating nucleic acids which up to date otherwise only can be accomplished with much more cumbersome chromatographic methods. In a benchmark comparison, it could be shown that the newly developed process exhibits a comparable yield to an industrial standard process while at the same time showing superior performance in terms of purity and process time. Additionally it could be shown that the developed polish procedure can be applied as a standalone module to support already existing processes.     

Recombination site selection by Tn3 resolvase: topological tests of a tracking mechanism

In vitro recombination by Tn3 resolvase of plasmids containing two directly repeated recombination (res) sites generates two singly interlinked catenated rings. This simple product catenane structure was maintained over a wide range of substrate supercoil densities and in a reaction mixture in which phage lambda Int-mediated recombination generated its characteristic multiply interlinked forms. Using substrates containing four res sites, we found that resolvase recombined neighboring res sites with high preference. This position effect implies that resolvase searches systematically along the DNA for a partner site. Intervening res sites in the opposite orientation did not prevent translocation. We analyzed the geometric arrangement of the interlocked rings after multiple recombination events in a four-site substrate and the pattern of segregation of nonspecific reporter rings catenated to the standard substrate. The results of these novel topological tests imply that the translocating enzyme may not make continuous contact with the DNA.     

Dynamics of long-range interactions on DNA: the speed of synapsis during site-specific recombination by resolvase.

A noninvasive method for monitoring communications on DNA was developed from the specificity of resolvase for the arrangement of its recombinational sites. Constraints in DNA structure, caused by interactions between distant sites, can be detected by resolvase as they arise. The method was used to follow the formation and decay of synaptic intermediates during site-specific recombination by resolvase. Synaptic complexes were formed very rapidly, at a rate limited by the initial association of the protein with DNA rather than the physical motion of DNA segments. The recombinational sites seem to encounter each other by an ordered motion, perhaps dictated by DNA supercoiling instead of random collisions, so that the first encounter produces the active complex.     

Characterization of the ATPase activity of the Escherichia coli RecG protein reveals that the preferred cofactor is negatively supercoiled DNA

RecG is a member of the superfamily 2 helicase family. Its possible role in vivo is ATP hydrolysis driven regression of stalled replication forks. To gain mechanistic insight into how this is achieved, a coupled spectrophotometric assay was utilized to characterize the ATPase activity of RecG in vitro. The results demonstrate an overwhelming preference for negatively supercoiled DNA ((-)scDNA) as a cofactor for the hydrolysis of ATP. In the presence of (-)scDNA the catalytic efficiency of RecG and the processivity (as revealed through heparin trapping), were higher than on any other cofactor examined. The activity of RecG on (-)scDNA was not due to the presence of single-stranded regions functioning as loading sites for the enzyme as relaxed circular DNA treated with DNA gyrase, resulted in the highest levels of ATPase activity. Relaxation of (-)scDNA by a topoisomerase resulted in a 12-fold decrease in ATPase activity, comparable to that observed on both linear double-stranded (ds)DNA and (+)scDNA. In addition to the elevated activity in the presence of (-)scDNA, RecG also has high activity on model 4Y-substrates (i.e. chicken foot structures). This is due largely to the high apparent affinity of the enzyme for this DNA substrate, which is 46-fold higher than a 2Y-substrate (i.e. a three-way with two single-stranded (ss)DNA arms). Finally, the enzyme exhibited significant, but lower activity on ssDNA. This activity was enhanced by the Escherichia coli stranded DNA-binding protein (SSB) protein, which occurs through stabilizing of the binding of RecG to ssDNA. Stabilization is not afforded by the bacteriophage gene 32 protein, indicating a species specific, protein-protein interaction is involved. These results combine to provide significant insight into the manner and timing of the interaction of RecG with DNA at stalled replication forks.     

Regulation of directionality in bacteriophage lambda site-specific recombination: structure of the Xis protein

Upon induction of a bacteriophage lambda lysogen, a site-specific recombination reaction excises the phage genome from the chromosome of its bacterial host. A critical regulator of this process is the phage-encoded excisionase (Xis) protein, which functions both as a DNA architectural factor and by cooperatively recruiting integrase to an adjacent binding site specifically required for excision. Here we present the three-dimensional structure of Xis and the results of a structure-based mutagenesis study to define the molecular basis of its function. Xis adopts an unusual "winged"-helix motif that is modeled to interact with the major- and minor-grooves of its binding site through a single alpha-helix and loop structure ("wing"), respectively. The C-terminal tail of Xis, which is required for cooperative binding with integrase, is unstructured in the absence of DNA. We propose that asymmetric bending of DNA by Xis positions its unstructured C-terminal tail for direct contacts with the N-terminal DNA-binding domain of integrase and that an ensuing disordered to ordered transition of the tail may act to stabilize the formation of the tripartite integrase-Xis-DNA complex required for phage excision.     

Site-specific recombination in eukaryotic cells mediated by mutant lambda integrases: implications for synaptic complex formation and the reactivity of episomal DNA segments

Mutant lambda integrases catalyze site-specific DNA recombination in the absence of accessory factors IHF, XIS, and negative DNA supercoiling. Here we investigate the effects that a human cellular environment exerts on these reactions in order to (i) gain further insights into mechanistic aspects of recombination in eukaryotic cells and (ii) to further develop the Int system for biotechnological applications. First, we compared intra- and intermolecular integrative as well as excisive recombination pathways on episomal substrates after co-transfection with recombinase expression vectors. Our results demonstrate that, within 24 hours after transfection, intermolecular recombination by mutant integrase is at least as efficient as intramolecular recombination. Second, a significant intermolecular recombination activity was observed between two copies of a recombination site containing only the 21 bp comprising core-type DNA sequence. This basic activity was stimulated several-fold when arm-type DNA sequences were present in addition to core sites. Therefore, one recombination pathway in human cells involves mutant integrases bound solely at core sites, which is reminiscent of the Flp/FRT and Cre/loxP pathways. The stimulatory effect of arm-type sequences could be explained by an increase in integrase concentration in the vicinity of core sites. We show, in addition, that an N-terminal truncated mutant integrase exhibited only a very weak recombinogenic activity in a eukaryotic background. This result strengthens a functional role for the N-terminal domain in recombination in addition to its arm-type DNA-binding activity. Finally, we demonstrate that low level integrative recombination by wild-type integrase is stimulated when purified integration host factor is co-transfected. This corroborates our previous conclusion that sufficient amounts of eukaryotic protein co-factors, which could functionally replace IHF, are not present in human cells. It also provides a potential means to control site-specific recombination in eukaryotic cells.     

Site-specific relaxation and recombination by the Tn3 resolvase: recognition of the DNA path between oriented res sites

We studied the dynamics of site-specific recombination by the resolvase encoded by the Escherichia coli transposon Tn3. The pure enzyme recombined supercoiled plasmids containing two directly repeated recombination sites, called res sites. Resolvase is the first strictly site-specific topoisomerase. It relaxed only plasmids containing directly repeated res sites; substrates with zero, one or two inverted sites were inert. Even when the proximity of res sites was ensured by catenation of plasmids with a single site, neither relaxation nor recombination occurred. The two circular products of recombination were catenanes interlinked only once. These properties of resolvase require that the path of the DNA between res sites be clearly defined and that strand exchange occur with a unique geometry. A model in which one subunit of a dimeric resolvase is bound at one res site, while the other searches along adjacent DNA until it encounters the second site, would account for the ability of resolvase to distinguish intramolecular from intermolecular sites, to sense the relative orientation of sites and to produce singly interlinked catenanes. Because resolvase is a type 1 topoisomerase, we infer that it makes the required duplex bDNA breaks of recombination one strand at a time.     

Electrostatic interactions and the folding of the four-way DNA junction: analysis by selective methyl phosphonate substitution

The structure and dynamics of the four-way (Holliday) junction are strongly dependent on the presence of metal ions. In this study, the importance of phosphate charge in and around the point of strand exchange has been explored by selective replacement with electrically neutral methyl phosphonate groups, guided by crystal structures of the junction in the folded, stacked X conformation. Junction conformation has been analysed by comparative gel electrophoresis and fluorescence resonance energy transfer (FRET). Three of sets of phosphate groups on the exchanging strands have been analysed; those at the point of strand exchange and those to their 3' and 5' sides. The exchanging and 3' phosphate groups form a box of negatively charged groups on the minor groove face of the junction, while the 5' phosphate groups face each other on the major groove side, with their proR oxygen atoms directed at one another. The largest effects are observed on substitution of the exchanging phosphate groups; replacement of both groups leads to the loss of the requirement for addition of metal ions to allow junction folding. When the equivalent phosphate groups on the continuous strands were substituted, a proportion of the junction folded into the alternative conformer so as to bring these phosphate groups onto the exchanging strands. These species did not interconvert, and thus this is likely to result from the alternative diasteromeric forms of the methyl phosphonate group. This shows that some of the conformational effects result from more than purely electrostatic interactions. Smaller but significant effects were observed on substitution of the flanking phosphate groups. All methyl phosphonate substitutions at these positions allowed folding to proceed at a reduced concentration of magnesium ions, with double substitutions more effective than single substitutions. Substitution of 5' phosphates resulted in a greater degree of folding at a given ionic concentration compared to the corresponding 3' phosphate substitutions. These results show that the phosphate groups at the point of strand exchange exert the largest electrostatic effect on junction folding, but a number of phosphate groups in the vicinity of the exchange region contribute to the overall effects.     

Interactions between proteins bound to the duck β-globin gene promoter and enhancer detected by the DNaseI footprinting

The duck β^A-globin (β^AGLB) enhancer was closely linked to the duck β^A-GLB promoter, and the construct was used to study binding of nuclear proteins to specific sites of these regulatory elements. DNaseI-footprint analysis showed that the presence of the enhancer induced binding of proteins to additional sites on the promoter. The results are consistent with the looping-out model, based on specific interactions of enhancer-bound and promoter bound-proteins.     

Purification and DNA binding of the D protein, a putative resolvase of the F-factor of Escherichia coli

Summary The D protein encoded by plasmid mini-F promotes resolution of plasmid cointegrates or dimers of the F-factor or mini-F. In addition, two rfsF sequences are essential for this site-specific, recA-independent recombination event. The D gene was cloned into an expression vector and the gene product was overproduced in Escherichia coli and purified to homogeneity. The sequence of the N-terminus of the D protein was determined, thus permitting identification of the correct translational start codon in the nucleotide sequence that results in a 29.6 kDa protein. The binding site for the purified D protein is located within the mini-F NcoIHpaI DNA fragment (192 bp). Binding seems to be affected by DNA methylation, since the protein did not bind to DNA isolated from a dam mutant of E. coli. The binding site, which is a region of approximately 28 bp and is located 160 by downstream of the rfsF site, was identified by DNase I footprinting using fluorescence labelled DNA.     

Interactions of human ribosomal protein S3 with intact and damaged DNA

Human S3 (hS3) is a structural component of the ribosome and, in addition to its role in translation, possesses apurinic/apyrimidinic (AP) lyase activity, characteristic of DNA repair enzymes. Recombinant hS3 was isolated from inclusion bodies, refolded under different conditions, and tested for the ability to bind and cleave oligodeoxyribonucleotide substrates with various lesions abundant in genomic DNA: AP sites, uracil, 8-oxoguanine, 8-oxoadenine, 5,6-dihydrouracil, and hypoxanthine. It was found that hS3 is capable of cleaving AP sites via the β-elimination mechanism, producing a Schiff base covalent intermediate, but cannot cleave substrates with the other lesions. Refolding in the presence of Fe²⁺ and S^2? did not increase hS3 activity, suggesting the absence of an iron-sulfur cluster. The binding of hS3 with DNA ligands containing oxidized or deaminated bases was less efficient than with intact DNA. It was assumed that the catalytic activity of hS3 towards AP sites is most likely unimportant for global DNA repair in vivo, but is possibly involved in repairing DNA sites in certain genome regions.     

Reversed DNA strand cleavage specificity in initiation of Cre-LoxP recombination induced by the His289Ala active-site substitution

During the first steps of site-specific recombination, Cre protein cleaves and religates a specific homologous pair of LoxP strands to form a Holliday junction (HJ) intermediate. The HJ is resolved into recombination products through exchange of the second homologous strand pair. CreH289A, containing a His to Ala substitution in the conserved R-H-R catalytic motif, has a 150-fold reduced recombination rate and accumulates HJs. However, to produce these HJs, CreH289A exchanges the opposite set of strands compared to wild-type Cre (CreWT). To investigate how CreH289A and CreWT impose strand exchange order, we characterized their reactivities and strand cleavage preferences toward LoxP duplex and HJ substrates containing 8bp spacer substitutions. Remarkably, CreH289A had different and often opposite strand exchange preferences compared to CreWT with nearly all substrates. CreH289N was much less perturbed, implying that overall recombination rate and strand exchange depend more on His289 hydrogen bonding capability than on its acid/base properties. LoxP substitutions immediately 5' (S1 nucleotide) or 3' (S1' nucleotide) of the scissile phosphate had large effects on substrate utilization and strand exchange order. S1' substitutions, designed to alter base-unstacking events concomitant with Cre-induced LoxP bending, caused HJ accumulation and dramatically inverted the cleavage preferences. That pre-formed HJs were resolved via either strand in vitro suggests that inhibition of the "conformational switch" isomerization required to trigger the second strand exchange accounts for the observed HJ accumulation. Rather than reflecting CreWT behavior, CreH289A accumulates HJs of opposite polarity through a combination of its unique cleavage specificity and an HJ isomerization defect. The overall implication is that cleavage specificity is mediated by sequence-dependent DNA deformations that influence the scissile phosphate positioning and reactivity. A role of His289 may be to selectively stabilize the "activated" phosphate conformation in order to promote cleavage.     

Factors affecting the efficiency of introducing precise genetic changes in ES cells by homologous recombination: tag-and-exchange versus the Cre-loxp system

The introduction of genetic modifications in specific genes by homologous recombination provides a powerful tool for elucidation of structure-function relationships of proteins of biological interest. Presently, there are several alternative methods of homologous recombination that permit the introduction of small genetic modifications in specific loci. Two of the most widely used methods are the tag-and-exchange, based on the use of positive--negative selection markers, and the Cre-loxP system, based on the use of a site-specific recombinase. The efficiency of detection of targeting events at different loci using the two systems was compared. Additionally, we analysed how the distance between two gene markers placed within the region of homology of a targeting vector affects the rate at which both markers are introduced into the locus during the homologous recombination event. Our results indicate that the method based on the use of positive--negative selection markers was les s efficient than the Cre-loxP based system, irrespective of locus or type of positive--negative selection. It was also determined that as the distance between the selectable marker and the genetic modification being introduced increases, there is a progressive reduction in the efficiency of detecting events with the desired genetic modification