Isogenic Strain Construction and Gene Mapping in Candida Albicans

Genetic manipulation of Candida albicans is constrained by its diploid genome and asexual life cycle. Recessive mutations are not expressed when heterozygous and undesired mutations introduced in the course of random mutagenesis cannot be removed by genetic back-crossing. To circumvent these problems, we developed a genotypic screen that permitted identification of a heterozygous recessive mutation at the URA3 locus. The mutation was introduced by targeted mutagenesis, homologous integration of transforming DNA, to avoid introduction of extraneous mutations. The ura3 mutation was rendered homozygous by a second round of transformation resulting in a Ura(-) strain otherwise isogenic with the parental clinical isolate. Subsequent mutation of the Ura(-) strain was achieved by targeted mutagenesis using the URA3 gene as a selectable marker. URA3 selection was used repeatedly for the sequential introduction of mutations by flanking the URA3 gene with direct repeats of the Salmonella typhimurium hisG gene. Spontaneous intrachromosomal recombination between the flanking repeats excised the URA3 gene restoring a Ura(-) phenotype. These Ura(-) segregants were selected on 5-fluoroorotic acid-containing medium and used in the next round of mutagenesis. To permit the physical mapping of disrupted genes, the 18-bp recognition sequence of the endonuclease I-SceI was incorporated into the hisG repeats. Site-specific cleavage of the chromosome with I-SceI revealed the position of the integrated sequences.     

Development of an efficient genetic manipulation strategy for sequential gene disruption and expression of different heterologous <Emphasis Type="Italic">GFP</Emphasis> genes in <Emphasis Type="Italic">Candida tropicalis</Emphasis>

The diploid yeast Candida tropicalis, which can utilize n-alkane as a carbon and energy source, is an attractive strain for both physiological studies and practical applications. However, it presents some characteristics, such as rare codon usage, difficulty in sequential gene disruption, and inefficiency in foreign gene expression, that hamper strain improvement through genetic engineering. In this work, we present a simple and effective method for sequential gene disruption in C. tropicalis based on the use of an auxotrophic mutant host defective in orotidine monophosphate decarboxylase (URA3). The disruption cassette, which consists of a functional yeast URA3 gene flanked by a 0.3 kb gene disruption auxiliary sequence (gda) direct repeat derived from downstream or upstream of the URA3 gene and of homologous arms of the target gene, was constructed and introduced into the yeast genome by integrative transformation. Stable integrants were isolated by selection for Ura⁺ and identified by PCR and sequencing. The important feature of this construct, which makes it very attractive, is that recombination between the flanking direct gda repeats occurs at a high frequency (10^?8) during mitosis. After excision of the URA3 marker, only one copy of the gda sequence remains at the recombinant locus. Thus, the resulting ura3 strain can be used again to disrupt a second allelic gene in a similar manner. In addition to this effective sequential gene disruption method, a codon-optimized green fluorescent protein-encoding gene (GFP) was functionally expressed in C. tropicalis. Thus, we propose a simple and reliable method to improve C. tropicalis by genetic manipulation.     

PCR- and ligation-mediated synthesis of split-marker cassettes with long flanking homology regions for gene disruption in Candida albicans

Because Candida albicans is a diploid organism, two consecutive steps of gene disruption are required to generate a gene knock-out. The same marker (URA3) is often used for disruption of both copies of the gene. This is possible because, after the first round of disruption, homologous recombination between direct repeats flanking the URA3 marker and the subsequent counterselection allow for the efficient recovery of Ura- revertants. Unfortunately, the URA-blaster disruption cassette cannot be used in a PCR-based disruption approach. The hisG repeats flanking the URA3 gene in the disruption cassette anneal to one another during PCR and thereby prevent amplification of the complete cassette. We explored the use of transformation based on split-marker recombination to circumvent this problem. To avoid any cloning steps and to retain the advantage of long flanking regions for disruption, we combined this with a PCR- and ligation-mediated approach for generating marker cassettes. We used this approach to disrupt the C. albicans FAL1 (ATP-dependent RNA helicase) gene. Long 5' and 3' FAL1-specific regions were amplified by PCR and individually ligated to a URA-blaster cassette. The resulting ligation reactions were used separately as templates to generate two FAL1 disruption cassettes with overlapping URA3 marker regions. Simultaneous transformation with both overlapping disruption cassettes yielded efficient disruption of one FAL1 allele.     

Directed mutagenesis in an asporogenous methylotrophic yeast: cloning, sequencing, and one-step gene disruption of the 3-isopropylmalate dehydrogenase gene (LEU2) of Candida boidinii to derive doubly auxotrophic marker strains.

A model system for one-step gene disruption for an asporogenous methylotrophic yeast, Candida boidinii, is described. In this system, the 3-isopropylmalate dehydrogenase gene (C. boidinii LEU2) was selected as the target gene for disruption to derive new host strains for transformation. First, the C. boidinii LEU2 gene was cloned, and its complete nucleotide sequence was determined. Next, the LEU2 disruption vectors, which had the C. boidinii URA3 gene as the selectable marker, were constructed. Of the Ura+ transformants obtained with these plasmids, more than half showed a Leu- phenotype. Finally, the double-marker strains of C. boidinii were derived. When vectors with repeated flanking sequences of the C. boidinii URA3 gene were used for gene disruption, Leu- Ura+ transformants changed spontaneously to a Leu- Ura- phenotype ca. 100 times more frequently than they did when plasmids without the repeated sequences were used. Southern analysis showed that these events included a one-step gene disruption and a subsequent popping out of the C. boidinii URA3 sequence from the transformant chromosome.     

Selectable cassettes for simplified construction of yeast gene disruption vectors

Cassettes based on a hisG-URA3-hisG insert have been modified by the addition of a Km^R-encoding gene and flanking polylinker sites, greatly simplifying construction of gene disruption vectors in Escherichia coli. After gene disruption in yeast, URA3 can then be excised by recombination between the hisG repeats flanking the gene, permitting reuse of the URA3 marker     

Sequential gene disruption in Candida albicans by FLP-mediated site-specific recombination

The genetic manipulation of the human fungal pathogen Candida albicans is difficult because of its diploid genome, the lack of a known sexual phase and its unusual codon usage. We devised a new method for sequential gene disruption in C. albicans that is based on the repeated use of the URA3 marker for selection of transformants and its subsequent deletion by FLP-mediated, site-specific recombination. A cassette was constructed that, in addition to the URA3 selection marker, contained an inducible SAP2P-FLP fusion and was flanked by direct repeats of the minimal FLP recognition site (FRT). This URA3 flipper cassette was used to generate homozygous C. albicans mutants disrupted for both alleles of either the CDR4 gene, encoding an ABC transporter, or the MDR1 gene, encoding a membrane transport protein of the major facilitator superfamily. After insertion of the URA3 flipper into the first copy of the target gene, the whole cassette could be efficiently excised by induced FLP-mediated recombination, leaving one FRT site in the disrupted allele of the target gene. The URA3 flipper was then used for another round of mutagenesis to disrupt the second allele. Deletion of the cassette from primary and secondary transformants occurred exclusively by intrachromosomal recombination of the FRT sites flanking the URA3 flipper, whereas interchromosomal recombination between FRT sites on the homologous chromosomes was never observed. This new gene disruption strategy facilitates the generation of specific, homozygous C. albicans mutants as it eliminates the need for a negative selection scheme for marker deletion and minimizes the risk of mitotic recombination in sequential disruption experiments.     

Directional ligation of long-flanking homology regions to selection cassettes for efficient targeted gene-disruption in Candida albicans

PCR-product directed gene disruption with a marker cassette having short homology regions is often used in Candida albicans. However, it is quite inefficient due to the high frequency of non-homologous recombination at non-targeted loci, which necessitates extensive screening to identify the correct disruptants. Thus, many PCR-based methods to introduce long flanking homology regions have been developed to increase the frequency of integration at the targeted loci. However, these methods are not that amenable for use with the widely employed C. albicans marker cassettes having direct repeats, as these repeats tend to recombine during PCR, resulting in shorter amplified products without the selection marker. To circumvent this limitation, we have developed a dinucleotide-sticky-end-ligation strategy to add one flanking homology region to one side of the selection cassette, and the other flanking homology region to the other side of the selection cassette. This method involves release of the selection cassette from the plasmid by digestion with two different restriction enzymes, followed by partial fill-in, to provide a unique two base overhang at each end of the cassette. The flanking homology regions, corresponding to the gene to be disrupted, are individually PCR-amplified, and treated with T4-DNA Polymerase in the presence of appropriate dNTPs to yield two base-5' overhangs. The primers used for the PCR have additional bases at the 5' ends such that after T4 DNA Polymerase treatment, the two flanks will have distinct overhangs compatible with the overhangs of the partially filled-in selection cassette. The selection cassette and the flanks are then ligated together and directly used to transform C. albicans. We have successfully used this method for disruption of several C. albicans genes. We have also used this method to recreate insertion mutations obtained with transposons to reconfirm the mutant phenotypes. This approach can be extended to other organisms like Schizosaccharomyces pombe which also require long flanking regions of homology for targeted gene disruption.     

Ac Induces Homologous Recombination at the Maize P Locus

The maize P gene conditions red phlobaphene pigmentation to the pericarp and cob. Starting from two unstable P alleles which carry insertions of the transposable element Ac, we have derived 51 P null alleles; 47 of the 51 null alleles have a 17-kb deletion which removes the 4.5-kb Ac element and 12.5 kb of P sequences flanking both sides of Ac. The deletion endpoints lie within two 5.2-kb homologous direct repeats which flank the P gene. A P allele which contains the direct repeats, but does not have an Ac insertion between the direct repeats, shows very little sporophytic or gametophytic instability. The apparent frequency of sporophytic mutations was not increased when Ac was introduced in trans. Southern analysis of DNA prepared from the pericarp tissue demonstrates that the deletions can occur premeiotically, in the somatic cells during development of the pericarp. Evidence is presented that the deletions occurred by homologous recombination between the two direct repeats, and that the presence of an Ac element at the P locus is associated with the recombination/deletion. These results add another aspect to the spectrum of activities of Ac: the destabilization of flanking direct repeat sequences.     

Repeated Use of Gal1 for Gene Disruption in Candida Albicans

A technique which has the potential to allow repeated use of the same selectable marker to create gene disruptions in Candida albicans has been developed. In this approach, originally described for Saccharomyces cerevisiae, the selectable marker is flanked by direct repeats. Mitotic recombination between these repeats leads to elimination of the selectable marker. A module in which the GALq1 gene is flanked by direct repeats of the bacterial CAT gene was constructed and used to disrupt one copy of the URA3 gene in a gal1 mutant. Gal- revertants were selected by plating on 2-deoxy-D-galactose (2DOG). The frequency of 2DOG-resistant colonies recovered was 20 times higher than that obtained with a similar construct not flanked by direct repeats. Of these, 20% had lost the GAL1 gene by recombination between the direct repeats. The GAL1 gene was used again to disrupt the remaining wild-type copy of the URA3 gene of one of these gal1 isolates, resulting in a stable ura3 mutant. This technique should be generally applicable to derive homozygous gene disruptions in this diploid organism.     

Size Of Gene Specific Inverted Repeat - Dependent Gene Deletion In Saccharomyces cerevisiae

We describe here an approach for rapidly producing scar-free and precise gene deletions in S. cerevisiae with high efficiency. Preparation of the disruption gene cassette in this approach was simply performed by overlap extension-PCR of an invert repeat of a partial or complete sequence of the targeted gene with URA3. Integration of the prepared disruption gene cassette to the designated position of a target gene leads to the formation of a mutagenesis cassette within the yeast genome, which consists of a URA3 gene flanked by the targeted gene and its inverted repeat between two short identical direct repeats. The inherent instability of the inverted sequences in close proximity facilitates the self-excision of the entire mutagenesis cassette deposited in the genome and promotes homologous recombination resulting in a seamless deletion via a single transformation. This rapid assembly circumvents the difficulty during preparation of disruption gene cassettes composed of two inverted repeats of the URA3, which requires the engineering of unique restriction sites for subsequent digestion and T4 DNA ligation in vitro. We further identified that the excision of the entire mutagenesis cassette flanked by two DRs in the transformed S. cerevisiae is dependent on the length of the inverted repeat of which a minimum of 800 bp is required for effective gene deletion. The deletion efficiency improves with the increase of the inverted repeat till 1.2 kb. Finally, the use of gene-specific inverted repeats of target genes enables simultaneous gene deletions. The procedure has the potential for application on other yeast strains to achieve precise and efficient removal of gene sequences.     

Stability of an inverted repeat in a human fibrosarcoma cell.

Deletions and rearrangements of DNA sequences within the genome of human cells result in mutations associated with human disease. We have developed a selection system involving a neo gene containing a DNA sequence inserted into the NcoI site that can be used to quantitatively assay deletion of this sequence from the chromosome. The spontaneous deletion from the neo gene of a 122 bp inverted repeat occurred at a rate of 2.1 x 10(-8) to <3.1 x 10(-9) revertants/cell/generation in three different cell lines. Deletion of the 122 bp inverted repeat occurred between 6 bp flanking direct repeats. Spontaneous deletion of a 122 bp non-palindromic DNA sequence flanked by direct repeats was not observed, indicating a rate of deletion of <3.1 x 10(-9) revertants/cell/generation. This result demonstrates that a 122 bp inverted repeat can exhibit a low level of instability in some locations in the chromosome of a human cell line.     

High-efficiency transformation of Pichia stipitis based on its URA3 gene and a homologous autonomous replication sequence, ARS2.

This paper describes the first high-efficiency transformation system for the xylose-fermenting yeast Pichia stipitis. The system includes integrating and autonomously replicating plasmids based on the gene for orotidine-5'-phosphate decarboxylase (URA3) and an autonomous replicating sequence (ARS) element (ARS2) isolated from P. stipitis CBS 6054. Ura- auxotrophs were obtained by selecting for resistance to 5-fluoroorotic acid and were identified as ura3 mutants by transformation with P. stipitis URA3. P. stipitis URA3 was cloned by its homology to Saccharomyces cerevisiae URA3, with which it is 69% identical in the coding region. P. stipitis ARS elements were cloned functionally through plasmid rescue. These sequences confer autonomous replication when cloned into vectors bearing the P. stipitis URA3 gene. P. stipitis ARS2 has features similar to those of the consensus ARS of S. cerevisiae and other ARS elements. Circular plasmids bearing the P. stipitis URA3 gene with various amounts of flanking sequences produced 600 to 8,600 Ura+ transformants per micrograms of DNA by electroporation. Most transformants obtained with circular vectors arose without integration of vector sequences. One vector yielded 5,200 to 12,500 Ura+ transformants per micrograms of DNA after it was linearized at various restriction enzyme sites within the P. stipitis URA3 insert. Transformants arising from linearized vectors produced stable integrants, and integration events were site specific for the genomic ura3 in 20% of the transformants examined. Plasmids bearing the P. stipitis URA3 gene and ARS2 element produced more than 30,000 transformants per micrograms of plasmid DNA. Autonomously replicating plasmids were stable for at least 50 generations in selection medium and were present at an average of 10 copies per nucleus.     

The kanamycin resistance transposon Tn2680 derived from the R plasmid Rts1 and carried by phage P1Km has flanking 0.8-kb-long direct repeats

Phage P1Km carries within the invertible DNA segment a 5-kb insertion with 0.8-kb terminal direct repeats flanking the kanamycin resistance determinant. The same structure was also found on the R plasmid Rts1, from which the Km resistance segment of P1Km was derived. Obviously, this Km resistance segment translocated as a unit to the P1 genome and it is therefore called Tn2680. Loss of the Km resistance determinant due to recombination between the flanking direct repeats occurs during vegetative growth of P1Km. Amplification of Tn2680 to tandem oligomers is documented and is thought to result from recombination between the flanking direct repeats. The flanking 0.8-kb repeats are different from known IS elements.     

Long inverted repeats are an at-risk motif for recombination in mammalian cells

Certain DNA sequence motifs and structures can promote genomic instability. We have explored instability induced in mouse cells by long inverted repeats (LIRs). A cassette was constructed containing a herpes simplex virus thymidine kinase (tk) gene into which was inserted an LIR composed of two inverted copies of a 1.1-kb yeast URA3 gene sequence separated by a 200-bp spacer sequence. The tk gene was introduced into the genome of mouse Ltk(-) fibroblasts either by itself or in conjunction with a closely linked tk gene that was disrupted by an 8-bp XhoI linker insertion; rates of intrachromosomal homologous recombination between the markers were determined. Recombination between the two tk alleles was stimulated 5-fold by the LIR, as compared to a long direct repeat (LDR) insert, resulting in nearly 10(-5) events per cell per generation. Of the tk(+) segregants recovered from LIR-containing cell lines, 14% arose from gene conversions that eliminated the LIR, as compared to 3% of the tk(+) segregants from LDR cell lines, corresponding to a >20-fold increase in deletions at the LIR hotspot. Thus, an LIR, which is a common motif in mammalian genomes, is at risk for the stimulation of homologous recombination and possibly other genetic rearrangements.     

The very large amplifiable element AUD2 from Streptomyces lividans 66 has insertion sequence-like repeats at its ends.

In a spontaneous, chloramphenicol-sensitive (Cms), arginine-auxotrophic (Arg-) mutant of Streptomyces lividans 1326, two amplified DNA sequences were found. One of them was the well-characterized 5.7-kb ADS1 sequence, amplified to about 300 copies per chromosome. The second one was a 92-kb sequence called ADS2. ADS2 encoding the previously isolated mercury resistance genes of S. lividans was amplified to around 20 copies per chromosome. The complete ADS2 sequence was isolated from a genomic library of the mutant S. lividans 1326.32, constructed in the phage vector lambda EMBL4. In addition, the DNA sequences flanking the corresponding amplifiable element called AUD2 in the wild-type strain were isolated by using another genomic library prepared from S. lividans 1326 DNA. Analysis of the ends of AUD2 revealed the presence of an 846-bp sequence on both sides repeated in the same orientation. Each of the direct repeats ended with 18-bp inverted repeated sequences. This insertion sequence-like structure was confirmed by the DNA sequence determined from the amplified copy of the direct repeats which demonstrated a high degree of similarity of 65% identity in nucleic acid sequence to IS112 from Streptomyces albus. The recombination event leading to the amplification of AUD2 occurred within these direct repeats, as shown by DNA sequence analysis. The amplification of AUD2 was correlated with a deletion on one side of the flanking chromosomal region beginning very near or in the amplified DNA. Strains of S. lividans like TK20 and TK21 which are mercury sensitive have completely lost AUD2 together with flanking chromosomal DNA on one or both sides.     

Meiotic Crossing over between Nonhomologous Chromosomes Affects Chromosome Segregation in Yeast

Meiotic recombination between artificial repeats positioned on nonhomologous chromosomes occurs efficiently in the yeast Saccharomyces cerevisiae. Both gene conversion and crossover events have been observed, with crossovers yielding reciprocal translocations. In the current study, 5.5-kb ura3 repeats positioned on chromosomes V and XV were used to examine the effect of ectopic recombination on meiotic chromosome segregation. Ura(+) random spores were selected and gene conversion vs. crossover events were distinguished by Southern blot analysis. Approximately 15% of the crossover events between chromosomes V and XV were associated with missegregation of one of these chromosomes. The missegregation was manifest as hyperploid spores containing either both translocations plus a normal chromosome, or both normal chromosomes plus one of the translocations. In those cases where it could be analyzed, missegregation occurred at the first meiotic division. These data are discussed in terms of a model in which ectopic crossovers compete efficiently with normal allelic crossovers in directing meiotic chromosome segregation.     

In vivo functional characterization of a yeast nucleotide sequence: construction of a mini-Mu derivative adapted to yeast

We have constructed a derivative of the bacteriophage Mu (called MudIIZZ1), which contains the lacZ gene coding for beta-galactosidase (beta Gal) and markers suited for yeast transformation (2 mu circle replication origin and LEU2). This new transposon is an efficient tool for studying the expression of cloned yeast nucleotide sequences through beta Gal-protein fusions. It is also adapted for one-step disruption experiments so that a functional map of the same sequence can be drawn. We have used this MudIIZZ1 transposon to study a 5-kb DNA fragment which had been cloned by complementation of a cold-sensitive respiration-deficient phenotype. By testing the expression of the beta Gal fusions and the disruption phenotype, we have confirmed the presence of a gene required for mitochondrial functions, and revealed another two open reading frames in the same fragment; one of these also interferes with mitochondrial biogenesis. The method is fast and reliable, and has potential for more general purposes which are discussed.